Commit graph

12 commits

Author SHA1 Message Date
Peter Zijlstra
90572890d2 mm: numa: Change page last {nid,pid} into {cpu,pid}
Change the per page last fault tracking to use cpu,pid instead of
nid,pid. This will allow us to try and lookup the alternate task more
easily. Note that even though it is the cpu that is store in the page
flags that the mpol_misplaced decision is still based on the node.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1381141781-10992-43-git-send-email-mgorman@suse.de
[ Fixed build failure on 32-bit systems. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09 14:47:45 +02:00
Mel Gorman
b795854b1f sched/numa: Set preferred NUMA node based on number of private faults
Ideally it would be possible to distinguish between NUMA hinting faults that
are private to a task and those that are shared. If treated identically
there is a risk that shared pages bounce between nodes depending on
the order they are referenced by tasks. Ultimately what is desirable is
that task private pages remain local to the task while shared pages are
interleaved between sharing tasks running on different nodes to give good
average performance. This is further complicated by THP as even
applications that partition their data may not be partitioning on a huge
page boundary.

To start with, this patch assumes that multi-threaded or multi-process
applications partition their data and that in general the private accesses
are more important for cpu->memory locality in the general case. Also,
no new infrastructure is required to treat private pages properly but
interleaving for shared pages requires additional infrastructure.

To detect private accesses the pid of the last accessing task is required
but the storage requirements are a high. This patch borrows heavily from
Ingo Molnar's patch "numa, mm, sched: Implement last-CPU+PID hash tracking"
to encode some bits from the last accessing task in the page flags as
well as the node information. Collisions will occur but it is better than
just depending on the node information. Node information is then used to
determine if a page needs to migrate. The PID information is used to detect
private/shared accesses. The preferred NUMA node is selected based on where
the maximum number of approximately private faults were measured. Shared
faults are not taken into consideration for a few reasons.

First, if there are many tasks sharing the page then they'll all move
towards the same node. The node will be compute overloaded and then
scheduled away later only to bounce back again. Alternatively the shared
tasks would just bounce around nodes because the fault information is
effectively noise. Either way accounting for shared faults the same as
private faults can result in lower performance overall.

The second reason is based on a hypothetical workload that has a small
number of very important, heavily accessed private pages but a large shared
array. The shared array would dominate the number of faults and be selected
as a preferred node even though it's the wrong decision.

The third reason is that multiple threads in a process will race each
other to fault the shared page making the fault information unreliable.

Signed-off-by: Mel Gorman <mgorman@suse.de>
[ Fix complication error when !NUMA_BALANCING. ]
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-30-git-send-email-mgorman@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-09 12:40:35 +02:00
Tim Chen
917d9290af mm: tune vm_committed_as percpu_counter batching size
Currently the per cpu counter's batch size for memory accounting is
configured as twice the number of cpus in the system.  However, for
system with very large memory, it is more appropriate to make it
proportional to the memory size per cpu in the system.

For example, for a x86_64 system with 64 cpus and 128 GB of memory, the
batch size is only 2*64 pages (0.5 MB).  So any memory accounting
changes of more than 0.5MB will overflow the per cpu counter into the
global counter.  Instead, for the new scheme, the batch size is
configured to be 0.4% of the memory/cpu = 8MB (128 GB/64 /256), which is
more inline with the memory size.

I've done a repeated brk test of 800KB (from will-it-scale test suite)
with 80 concurrent processes on a 4 socket Westmere machine with a total
of 40 cores.  Without the patch, about 80% of cpu is spent on spin-lock
contention within the vm_committed_as counter.  With the patch, there's
a 73x speedup on the benchmark and the lock contention drops off almost
entirely.

[akpm@linux-foundation.org: fix section mismatch]
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:32 -07:00
Mel Gorman
a4e1b4c6c6 mm: init: report on last-nid information stored in page->flags
Answering the question "how much space remains in the page->flags" is
time-consuming.  mminit_loglevel can help answer the question but it
does not take last_nid information into account.  This patch corrects it
and while there it corrects the messages related to page flag usage,
pgshifts and node/zone id.  When applied the relevant output looks
something like this but will depend on the kernel configuration.

  mminit::pageflags_layout_widths Section 0 Node 9 Zone 2 Lastnid 9 Flags 25
  mminit::pageflags_layout_shifts Section 19 Node 9 Zone 2 Lastnid 9
  mminit::pageflags_layout_pgshifts Section 0 Node 55 Zone 53 Lastnid 44
  mminit::pageflags_layout_nodezoneid Node/Zone ID: 64 -> 53
  mminit::pageflags_layout_usage location: 64 -> 44 layout 44 -> 25 unused 25 -> 0 page-flags

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:18 -08:00
Paul Gortmaker
b95f1b31b7 mm: Map most files to use export.h instead of module.h
The files changed within are only using the EXPORT_SYMBOL
macro variants.  They are not using core modular infrastructure
and hence don't need module.h but only the export.h header.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Marcin Slusarz
759f9a2df7 mm: mminit_loglevel cannot be __meminitdata anymore
mminit_loglevel is now used from mminit_verify_zonelist <- build_all_zonelists <-

1. online_pages <- memory_block_action <- memory_block_change_state <- store_mem_state (sys handler)
2. numa_zonelist_order_handler (proc handler)

so it cannot be annotated __meminit - drop it

fixes following section mismatch warning:
WARNING: vmlinux.o(.text+0x71628): Section mismatch in reference from the function mminit_verify_zonelist() to the variable .meminit.data:mminit_loglevel
The function mminit_verify_zonelist() references
the variable __meminitdata mminit_loglevel.
This is often because mminit_verify_zonelist lacks a __meminitdata
annotation or the annotation of mminit_loglevel is wrong.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20 15:40:30 -07:00
Andrew Morton
5c9ffc9c3d mm_init.c: avoid ifdef-inside-macro-expansion
gcc-3.2:

  mm/mm_init.c:77:1: directives may not be used inside a macro argument
  mm/mm_init.c:76:47: unterminated argument list invoking macro "mminit_dprintk"
  mm/mm_init.c: In function `mminit_verify_pageflags_layout':
  mm/mm_init.c:80: `mminit_dprintk' undeclared (first use in this function)
  mm/mm_init.c:80: (Each undeclared identifier is reported only once
  mm/mm_init.c:80: for each function it appears in.)
  mm/mm_init.c:80: syntax error before numeric constant

Also fix a typo in a comment.

Reported-by: Adrian Bunk <bunk@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-05 14:33:46 -07:00
Nishanth Aravamudan
ff7ea79cf7 mm: create /sys/kernel/mm
Add a kobject to create /sys/kernel/mm when sysfs is mounted.  The kobject
will exist regardless.  This will allow for the hugepage related sysfs
directories to exist under the mm "subsystem" directory.  Add an ABI file
appropriately.

[kosaki.motohiro@jp.fujitsu.com: fix build]
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:17 -07:00
Nishanth Aravamudan
5e9426abe2 mm: remove mm_init compilation dependency on CONFIG_DEBUG_MEMORY_INIT
Towards the end of putting all core mm initialization in mm_init.c, I
plan on putting the creation of a mm kobject in a function in that file.
However, the file is currently only compiled if CONFIG_DEBUG_MEMORY_INIT
is set. Remove this dependency, but put the code under an #ifdef on the
same config option. This should result in no functional changes.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:17 -07:00
Mel Gorman
68ad8df42e mm: print out the zonelists on request for manual verification
This patch prints out the zonelists during boot for manual verification by the
user if the mminit_loglevel is MMINIT_VERIFY or higher.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:14 -07:00
Mel Gorman
708614e618 mm: verify the page links and memory model
Print out information on how the page flags are being used if mminit_loglevel
is MMINIT_VERIFY or higher and unconditionally performs sanity checks on the
flags regardless of loglevel.

When the page flags are updated with section, node and zone information, a
check are made to ensure the values can be retrieved correctly.  Finally we
confirm that pfn_to_page and page_to_pfn are the correct inverse functions.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:13 -07:00
Mel Gorman
6b74ab97bc mm: add a basic debugging framework for memory initialisation
Boot initialisation is very complex, with significant numbers of
architecture-specific routines, hooks and code ordering.  While significant
amounts of the initialisation is architecture-independent, it trusts the data
received from the architecture layer.  This is a mistake, and has resulted in
a number of difficult-to-diagnose bugs.

This patchset adds some validation and tracing to memory initialisation.  It
also introduces a few basic defensive measures.  The validation code can be
explicitly disabled for embedded systems.

This patch:

Add additional debugging and verification code for memory initialisation.

Once enabled, the verification checks are always run and when required
additional debugging information may be outputted via a mminit_loglevel=
command-line parameter.

The verification code is placed in a new file mm/mm_init.c.  Ideally other mm
initialisation code will be moved here over time.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:13 -07:00