* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hid-multitouch: add support for a new Lumio dual-touch panel
HID: hid-multitouch: correct VID for Stantum panels
HID: hid-multitouch: ensure slots are initialized
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] allow setting of upper 32 bit in smp_ctl_set_bit
[S390] hwsampler: Set a sane default sampling rate
[S390] s390: enforce HW limits for the initial sampling rate
[S390] kvm-s390: fix kconfig dependencies
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
cifs: propagate errors from cifs_get_root() to mount(2)
cifs: tidy cifs_do_mount() up a bit
cifs: more breakage on mount failures
cifs: close sget() races
cifs: pull freeing mountdata/dropping nls/freeing cifs_sb into cifs_umount()
cifs: move cifs_umount() call into ->kill_sb()
cifs: pull cifs_mount() call up
sanitize cifs_umount() prototype
cifs: initialize ->tlink_tree in cifs_setup_cifs_sb()
cifs: allocate mountdata earlier
cifs: leak on mount if we share superblock
cifs: don't pass superblock to cifs_mount()
cifs: don't leak nls on mount failure
cifs: double free on mount failure
take bdi setup/destruction into cifs_mount/cifs_umount
Acked-by: Steve French <smfrench@gmail.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: Remove unneeded version.h includes from sound/
ASoC: pxa-ssp: Correct check for stream presence
ASoC: imx: add missing module informations
ASoC: imx: Remove unused Kconfig SND_MXC_SOC_SSI entry
ALSA: HDA: Pinfix quirk for HP Z200 Workstation
ALSA: VIA HDA: Create a master amplifier control for VT1718S.
ALSA: VIA HDA: Mute/unmute mixer conncted to Headphone for VT1718S.
ALSA: VIA HDA: Modify initial verbs list for VT1718S.
ALSA: hda - Remove ALC268 model override for CPR2000
ALSA: HDA: Remove quirk for an HP device
ASoC: Remove unused and about to be broken SND_SOC_CUSTOM I/O bus
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
drm/i915: save/resume forcewake lock fixes
Revert "drm/i915: Kill GTT mappings when moving from GTT domain"
drm/i915: Apply HWSTAM workaround for BSD ring on SandyBridge
drm/i915: Call intel_enable_plane from i9xx_crtc_mode_set (again)
... instead of just failing with -EINVAL
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
if cifs_get_root() fails, we end up with ->mount() returning NULL,
which is not what callers expect. Moreover, in case of superblock
reuse we end up leaking a superblock reference...
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
have ->s_fs_info set by the set() callback passed to sget()
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all callers of cifs_umount() proceed to do the same thing; pull it into
cifs_umount() itself.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
instead of calling it manually in case if cifs_read_super() fails
to set ->s_root, just call it from ->kill_sb(). cifs_put_super()
is gone now *and* we have cifs_sb shutdown and destruction done
after the superblock is gone from ->s_instances.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... to the point prior to sget(). Now we have cifs_sb set up early
enough.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
a) superblock argument is unused
b) it always returns 0
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
no need to wait until cifs_read_super() and we need it done
by the time cifs_mount() will be called.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
pull mountdata allocation up, so that it won't stand in the way when
we lift cifs_mount() to location before sget().
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
cifs_sb and nls end up leaked...
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
To close sget() races we'll need to be able to set cifs_sb up before
we get the superblock, so we'll want to be able to do cifs_mount()
earlier. Fortunately, it's easy to do - setting ->s_maxbytes can
be done in cifs_read_super(), ditto for ->s_time_gran and as for
putting MS_POSIXACL into ->s_flags, we can mirror it in ->mnt_cifs_flags
until cifs_read_super() is called. Kill unused 'devname' argument,
while we are at it...
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
if cifs_sb allocation fails, we still need to drop nls we'd stashed
into volume_info - the one we would've copied to cifs_sb if we could
allocate the latter.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
if we get to out_super with ->s_root already set (e.g. with
cifs_get_root() failure), we'll end up with cifs_put_super()
called and ->mountdata freed twice. We'll also get cifs_sb
freed twice and cifs_sb->local_nls dropped twice. The problem
is, we can get to out_super both with and without ->s_root,
which makes ->put_super() a bad place for such work.
Switch to ->kill_sb(), have all that work done there after
kill_anon_super(). Unlike ->put_super(), ->kill_sb() is
called by deactivate_locked_super() whether we have ->s_root
or not.
Acked-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This does not work properly with CIFS as current servers do not
enable support for the FILE_OPEN_BY_FILE_ID on SMB NTCreateX
and not all NFS clients handle ESTALE.
For now, it just plain doesn't work. Mark it BROKEN to discourage
distros from enabling it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This is currently leaked in the rc == 0 case.
Reported-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'for-linus' of git://git.kernel.dk/linux-block:
block: add REQ_SECURE to REQ_COMMON_MASK
block: use the passed in @bdev when claiming if partno is zero
block: Add __attribute__((format(printf...) and fix fallout
block: make disk_block_events() properly wait for work cancellation
block: remove non-syncing __disk_block_events() and fold it into disk_block_events()
block: don't use non-syncing event blocking in disk_check_events()
cfq-iosched: fix locking around ioc->ioc_data assignment
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
pata_marvell: Add support for 88SE91A0, 88SE91A4
libata/sas: only set FROZEN flag if new EH is supported
libata: apply NOSETXFER horkage to the affected Pioneer drives regardless of firmware revision
drivers/ata/sata_dwc_460ex: Fix typo 'corrresponding'
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: handle special cases for vddc
drm/radeon/kms: fix num_banks tiling config for fusion
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
x86/PCI/ACPI: fix type mismatch
PCI: fix new kernel-doc warning
PCI: Fix warning in drivers/pci/probe.c on sparc64
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: fix wsize negotiation to respect max buffer size and active signing (try #4)
CIFS: Fix problem with 3.0-rc1 null user mount failure
It was pointed out by 'make versioncheck' that some includes of
linux/version.h were not needed in fs/ (fs/btrfs/ctree.h and
fs/omfs/file.c).
This patch removes them.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
while merging hid-stantum into hid-multitouch, I did not correctly copy/paste
the VIDs for those devices. This patch fixes it.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In case a device does not provide the feature "Maximum Contact Count",
or set it at 0, the maxcontacts field may be at 0 while calling
input_mt_init_slots.
This patch ensures that hid-multitouch will allways report
ABS_MT_SLOT and ABS_MT_TRACKING_ID to the user space.
This corrects a bug found with some Ilitek devices that has been
integrated in 3.0-rc0.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In the sound/ directory there are two files (flagged by 'make
versioncheck'); sound/pci/asihpi/asihpi.c and
sound/soc/codecs/wm8991.c that include linux/version.h although they
don't need it. This patch removes the unneeded includes.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensure that the TLS register is saved and restored over a suspend
cycle, so that userspace programs don't see a corrupted TLS value.
Tested-by: Kevin Hilman <khilman@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add the missing suspend/resume pointers for the suspend code. This
is needed when building for multiple CPUs.
Tested-by: Kevin Hilman <khilman@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch enables support for Marvell IDE PATA controllers found on
Asus P8P67LE motherboard.
The formatting has been corrected and I also received a report from two
users of this motherboard that the patch works.
Signed-off-by: Paweł Drewniak <czajernia@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
A voltage value of 0xff01 requires that the driver
look up the max voltage for the board based using the
atom SetVoltage command table.
Setting the proper voltage should fix stability on
some newer asics.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The field is encoded:
0 = 4 banks
1 = 8 banks
2 = 16 banks
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch fixes the following conversion specification warning for size_t
drivers/target/tcm_fc/tfc_io.c: In function ‘ft_queue_data_in’:
drivers/target/tcm_fc/tfc_io.c:209: warning: format ‘%x’ expects type ‘unsigned int’, but argument 5 has type ‘size_t’
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
There is a typo here, it should be an unlock instead of a lock. The
original code will deadlock.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This patch fixes a bug in ft_send_tm() that was incorrectly calling
ft_get_lun_for_cmd() -> transport_get_lun_for_cmd(), instead of using
transport_get_lun_for_tmr() for the proper struct se_lun lookup
that was triggering an OOPs in the se_cmd->tmr_req failure path.
This patch fixes the issue by re-arranging the codepath where
transport_get_lun_for_tmr() is called after tmr request is allocated and
made it available as part of se_cmd.
It also drops the now unnecessary ft_get_lun_for_cmd() unpacking code, and
uses scsilun_to_int() directly ahead of transport_get_lun_for_cmd() and
transport_get_lun_for_tmr() usage.
Signed-off-by: Patil, Kiran <kiran.patil@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
This patch fixes a number of cases in target core using an incorrectly
if (strlen(foo) > SOME_MAX_SIZE)
As strlen() returns the number of characters in the string not counting
the NULL character at the end. So if you do something like:
char buf[10];
if (strlen("0123456789") > 10)
return -ETOOLONG;
snprintf(buf, 10, "0123456789");
printf("%s\n", buf);
then the last "9" gets chopped off and only "012345678" is printed.
Plus I threw in one small related cleanup.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In the original code, there were several places inside the
target_fabric_configfs_init() function that returned NULL on error
and one place the returned an ERR_PTR. There are two places that
call this function and they only check for NULL returns; they don't
check for ERR_PTRs. So I've changed the ERR_PTR so now the function
only returns NULL on error.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
transport_init_session() and core_tmr_alloc_req() never return NULL,
they only return ERR_PTRs on error.
v2: Fix patch to return PTR_ERR(tl_nexus->se_sess) from Ankit Jain's
feedback.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ankit Jain <jankit@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
