Commit graph

8 commits

Author SHA1 Message Date
Martin Schwidefsky
6252d702c5 [S390] dynamic page tables.
Add support for different number of page table levels dependent
on the highest address used for a process. This will cause a 31 bit
process to use a two level page table instead of the four level page
table that is the default after the pud has been introduced. Likewise
a normal 64 bit process will use three levels instead of four. Only
if a process runs out of the 4 tera bytes which can be addressed with
a three level page table the fourth level is dynamically added. Then
the process can use up to 8 peta byte.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09 18:24:41 +01:00
Martin Schwidefsky
5a216a2083 [S390] Add four level page tables for CONFIG_64BIT=y.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09 18:24:40 +01:00
Martin Schwidefsky
146e4b3c8b [S390] 1K/2K page table pages.
This patch implements 1K/2K page table pages for s390.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09 18:24:40 +01:00
Martin Schwidefsky
2f569afd9c CONFIG_HIGHPTE vs. sub-page page tables.
Background: I've implemented 1K/2K page tables for s390.  These sub-page
page tables are required to properly support the s390 virtualization
instruction with KVM.  The SIE instruction requires that the page tables
have 256 page table entries (pte) followed by 256 page status table entries
(pgste).  The pgstes are only required if the process is using the SIE
instruction.  The pgstes are updated by the hardware and by the hypervisor
for a number of reasons, one of them is dirty and reference bit tracking.
To avoid wasting memory the standard pte table allocation should return
1K/2K (31/64 bit) and 2K/4K if the process is using SIE.

Problem: Page size on s390 is 4K, page table size is 1K or 2K.  That means
the s390 version for pte_alloc_one cannot return a pointer to a struct
page.  Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one
cannot return a pointer to a pte either, since that would require more than
32 bit for the return value of pte_alloc_one (and the pte * would not be
accessible since its not kmapped).

Solution: The only solution I found to this dilemma is a new typedef: a
pgtable_t.  For s390 pgtable_t will be a (pte *) - to be introduced with a
later patch.  For everybody else it will be a (struct page *).  The
additional problem with the initialization of the ptl lock and the
NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and
a destructor pgtable_page_dtor.  The page table allocation and free
functions need to call these two whenever a page table page is allocated or
freed.  pmd_populate will get a pgtable_t instead of a struct page pointer.
 To get the pgtable_t back from a pmd entry that has been installed with
pmd_populate a new function pmd_pgtable is added.  It replaces the pmd_page
call in free_pte_range and apply_to_pte_range.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:42 -08:00
Benjamin Herrenschmidt
5e5419734c add mm argument to pte/pmd/pud/pgd_free
(with Martin Schwidefsky <schwidefsky@de.ibm.com>)

The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as
first argument.  The free functions do not get the mm_struct argument.  This
is 1) asymmetrical and 2) to do mm related page table allocations the mm
argument is needed on the free function as well.

[kamalesh@linux.vnet.ibm.com: i386 fix]
[akpm@linux-foundation.org: coding-syle fixes]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:18 -08:00
Martin Schwidefsky
190a1d722a [S390] 4level-fixup cleanup
Get independent from asm-generic/4level-fixup.h

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22 12:52:49 +02:00
Martin Schwidefsky
ba8a9229ab [S390] tlb flush fix.
The current tlb flushing code for page table entries violates the
s390 architecture in a small detail. The relevant section from the
principles of operation (SA22-7832-02 page 3-47):

   "A valid table entry must not be changed while it is attached
   to any CPU and may be used for translation by that CPU except to
   (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY or
   INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page-table
   entry, or (3) make a change by means of a COMPARE AND SWAP AND
   PURGE instruction that purges the TLB."

That means if one thread of a multithreaded applciation uses a vma
while another thread does an unmap on it, the page table entries of
that vma needs to get removed with IPTE, IDTE or CSP. In some strange
and rare situations a cpu could check-stop (die) because a entry has
been pushed out of the TLB that is still needed to complete a
(milli-coded) instruction. I've never seen it happen with the current
code on any of the supported machines, so right now this is a
theoretical problem. But I want to fix it nevertheless, to avoid
headaches in the futures.

To get this implemented correctly without changing common code the
primitives ptep_get_and_clear, ptep_get_and_clear_full and
ptep_set_wrprotect need to use the IPTE instruction to invalidate the
pte before the new pte value gets stored. If IPTE is always used for
the three primitives three important operations will have a performace
hit: fork, mprotect and exit_mmap. Time for some workarounds:

* 1: ptep_get_and_clear_full is used in unmap_vmas to remove page
tables entries in a batched tlb gather operation. If the mmu_gather
context passed to unmap_vmas has been started with full_mm_flush==1
or if only one cpu is online or if the only user of a mm_struct is the
current process then the fullmm indication in the mmu_gather context is
set to one. All TLBs for mm_struct are flushed by the tlb_gather_mmu
call. No new TLBs can be created while the unmap is in progress. In
this case ptep_get_and_clear_full clears the ptes with a simple store.

* 2: ptep_get_and_clear is used in change_protection to clear the
ptes from the page tables before they are reentered with the new
access flags. At the end of the update flush_tlb_range clears the
remaining TLBs. In general the ptep_get_and_clear has to issue IPTE
for each pte and flush_tlb_range is a nop. But if there is only one
user of the mm_struct then ptep_get_and_clear uses simple stores
to do the update and flush_tlb_range will flush the TLBs.

* 3: Similar to 2, ptep_set_wrprotect is used in copy_page_range
for a fork to make all ptes of a cow mapping read-only. At the end of
of copy_page_range dup_mmap will flush the TLBs with a call to
flush_tlb_mm.  Check for mm->mm_users and if there is only one user
avoid using IPTE in ptep_set_wrprotect and let flush_tlb_mm clear the
TLBs.

Overall for single threaded programs the tlb flush code now performs
better, for multi threaded programs it is slightly worse. In particular
exit_mmap() now does a single IDTE for the mm and then just frees every
page cache reference and every page table page directly without a delay
over the mmu_gather structure.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22 12:52:48 +02:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00