xfs_bmap_last_offset() can fail and return an error.
xfs_iomap_write_allocate() fails to detect and propagate the error.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30802a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_free_extent() can fail, but log recovery never bothers to check if it
successfully free the extent it was supposed to. This could lead to silent
corruption during log recovery. Abort log recovery if we fail to free an
extent.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30801a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
block_truncate_page() can return errors that we currently ignore and
silently discard. We should not ever get errors reported here - an error
indicates a bug somewhere else. Hence catch the error and issue a stack
dump to the syslog because we cannot propagate the error any further up
the call chain.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30800a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_alloc_compute_aligned() returns a value based on a comparison of the
computed extent length and the minimum length allowed. This is only used
by some callers - the other four return parameters are used more often.
Hence move the comparison to the code that actually needs to do it and
make xfs_alloc_compute_aligned() a void function.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30797a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_alloc_search_busy() returns an index into the busy array if the extent
was found in the array. This is never checked, and the
xfs_alloc_search_busy() does a log force to prevent reuse of the extent
before the free transaction hits the disk. Hence the return value is
useless. Declare the function void and remove the slot number from the
tracing as well.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30796a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_trans_commit() can return errors when there are problems in the
transaction subsystem. They are indicative that the entire transaction may
be incomplete, and hence the error should be propagated as there is a good
possibility that there is something fatally wrong in the filesystem. Catch
and propagate or warn about commit errors in the places where they are
currently ignored.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30795a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_trans_reserve() reports errors that should not be ignored. For
example, a shutdown filesystem will report errors through
xfs_trans_reserve() to prevent further changes from being attempted on a
damaged filesystem. Catch and propagate all error conditions from
xfs_trans_reserve().
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30794a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Removing an ACL can return an error. Propagate it.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30793a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Propagate the error status from xfs_acl_setmode() so that callers know if
the ACl was set correctly or not.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30792a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Truncating the quota files can silently fail. Ensure that truncation
errors are propagated to the callers.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30791a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When turning off quota, we need to write various transactions to the log
to ensure that they are cleanly removed in the case of a crash. We need to
check that the transactions hit the disk correctly. If we fail to write
the final quota off transaction, we are corrupt in memory and so the only
option is to shut the filesystem down at this point.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30790a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Warn to the syslog if we fail to reset the quota flags in the superblock
when a quota check fails.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30789a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_qm_mount_quotas() returns an error status that is ignored. If we fail
to mount quotas, we continue with quota's turned off, which is all handled
inside xfs_qm_mount_quotas(). Mark it as void to indicate that errors need
not be returned to the callers.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30788a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_qm_dqflush() can fail, but the return is not checked anywhere. Hence
we never know if we've failed to flush a dquot to disk. Propagate the
error and warn to the syslog if a flush ever fails.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30787a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_qm_dqflush_all() can return flush errors. Ensure they are propagated
into the quotacheck code to determine if the quotacheck succeeded or not.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30786a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_reserve_blocks() can fail in interesting ways. In neither case is it a
fatal error, but the result can lead to sub-optimal behaviour. Warn to the
syslog if the call fails but otherwise continue.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30784a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Makes it simpler to annotate function prototypes with __must_check via sed
scripts.
SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30781a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This target component validation is not POSIX conformant and it is not
done by any other Linux filesystem so remove it from XFS.
SGI-PV: 980080
SGI-Modid: xfs-linux-melb:xfs-kern:30776a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove the remaining uses of __inline in the XFS code base.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30774a
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Recent changes to xlog_state_release_iclog() placed the grant_lock inside
the icloglock. forced unmount of the log does this the opposite way
around, but does not depend on the order for correct working. Fix the
inversion by changing the order locks are gained in
xfs_log_force_umount().
SGI-PV: 979661
SGI-Modid: xfs-linux-melb:xfs-kern:30773a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
To reduce contention on the log in large CPU count, separate out different
parts of the xlog_t structure onto different cachelines. Move each lock
onto a different cacheline along with all the members that are
accessed/modified while that lock is held.
Also, move the debugging code into debug code.
SGI-PV: 978729
SGI-Modid: xfs-linux-melb:xfs-kern:30772a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The ticket allocator is just a simple slab implementation internal to the
log. It requires the icloglock to be held when manipulating it and this
contributes to contention on that lock.
Just kill the entire allocator and use a memory zone instead. While there,
allow us to gracefully fail allocation with ENOMEM.
SGI-PV: 978729
SGI-Modid: xfs-linux-melb:xfs-kern:30771a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Rather than use the icloglock for protecting the iclog completion callback
chain, use a new per-iclog lock so that walking the callback chain doesn't
require holding a global lock.
This reduces contention on the icloglock during transaction commit and log
I/O completion by reducing the number of times we need to hold the global
icloglock during these operations.
SGI-PV: 978729
SGI-Modid: xfs-linux-melb:xfs-kern:30770a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
While investigating the extent corruption bug I ran into this bug in debug
only code. xfs_bmap_check_leaf_extents() loops through the leaf blocks of
the extent btree checking that every extent is entirely before the next
extent. It also compares the last extent in the previous block to the
first extent in the current block when the previous block has been
released and potentially unmapped. So take a copy of the last extent
instead of a pointer. Also move the last extent check out of the loop
because we only need to do it once.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30718a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Most VN_RELE calls either directly contain a XFS_ITOV or have the
corresponding xfs_inode already in scope. Use the IRELE helper instead of
VN_RELE to clarify the code. With a little more work we can kill VN_RELE
altogether and define IRELE in terms of iput directly.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30710a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The three subcases of xfs_ioc_xattr don't share any semantics and almost
no code, so split it into three separate helpers.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30709a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
- rename rootvp to root for clarify
- remove useless vn_to_inode call
- check is_bad_inode before calling d_alloc_root
- use iput instead of VN_RELE in the error case
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30708a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When writing into preallocated regions there is a case where XFS can oops
or hang doing the unwritten extent conversion on I/O completion. It turns
out that the problem is related to the btree cursor being invalid.
When we do an insert into the tree, we may need to split blocks in the
tree. When we only split at the leaf level (i.e. level 0), everything
works just fine. However, if we have a multi-level split in the btreee,
the cursor passed to the insert function is no longer valid once the
insert is complete.
The leaf level split is handled correctly because all the operations at
level 0 are done using the original cursor, hence it is updated correctly.
However, when we need to update the next level up the tree, we don't use
that cursor - we use a cloned cursor that points to the index in the next
level up where we need to do the insert.
Hence if we need to split a second level, the changes to the tree are
reflected in the cloned cursor and not the original cursor. This
clone-and-move-up-a-level-on-split behaviour recurses all the way to the
top of the tree.
The complexity here is that these cloned cursors do not point to the
original index that was inserted - they point to the newly allocated block
(the right block) and the original cursor pointer to that level may still
point to the left block. Hence, without deep examination of the cloned
cursor and buffers, we cannot update the original cursor with the new path
from the cloned cursor.
In these cases the original cursor could be pointing to the wrong block(s)
and hence a subsequent modification to the tree using that cursor will
lead to corruption of the tree.
The crash case occurs when the tree changes height - we insert a new level
in the tree, and the cursor does not have a buffer in it's path for that
level. Hence any attempt to walk back up the cursor to the root block will
result in a null pointer dereference.
To make matters even more complex, the BMAP BT is rooted in an inode, so
we can have a change of height in the btree *without a root split*. That
is, if the root block in the inode is full when we split a leaf node, we
cannot fit the pointer to the new block in the root, so we allocate a new
block, migrate all the ptrs out of the inode into the new block and point
the inode root block at the newly allocated block. This changes the height
of the tree without a root split having occurred and hence invalidates the
path in the original cursor.
The patch below prevents xfs_bmbt_insert() from returning with an invalid
cursor by detecting the cases that invalidate the original cursor and
refresh it by do a lookup into the btree for the original index we were
inserting at.
Note that the INOBT, AGFBNO and AGFCNT btree implementations also have
this bug, but the cursor is currently always destroyed or revalidated
after an insert for those trees. Hence this patch only address the problem
in the BMBT code.
SGI-PV: 979339
SGI-Modid: xfs-linux-melb:xfs-kern:30701a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
At ENOSPC, we can get a filesystem shutdown due to a cancelling a dirty
transaction in xfs_mkdir or xfs_create. This is due to the initial
allocation attempt not taking into account inode alignment and hence we
can prepare the AGF freelist for allocation when it's not actually
possible to do an allocation. This results in inode allocation returning
ENOSPC with a dirty transaction, and hence we shut down the filesystem.
Because the first allocation is an exact allocation attempt, we must tell
the allocator that the alignment does not affect the allocation attempt.
i.e. we will accept any extent alignment as long as the extent starts at
the block we want. Unfortunately, this means that if the longest free
extent is less than the length + alignment necessary for fallback
allocation attempts but is long enough to attempt a non-aligned
allocation, we will modify the free list.
If we then have the exact allocation fail, all other allocation attempts
will also fail due to the alignment constraint being taken into account.
Hence the initial attempt needs to set the "alignment slop" field so that
alignment, while not required, must be taken into account when determining
if there is enough space left in the AG to do the allocation.
That means if the exact allocation fails, we will not dirty the freelist
if there is not enough space available fo a subsequent allocation to
succeed. Hence we get an ENOSPC error back to userspace without shutting
down the filesystem.
SGI-PV: 978886
SGI-Modid: xfs-linux-melb:xfs-kern:30699a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Replace the xfs_ail_entry_t with a struct list_head and clean the
surrounding code up. Also fixes a livelock in xfs_trans_first_push_ail()
by terminating the loop at the head of the list correctly.
SGI-PV: 978682
SGI-Modid: xfs-linux-melb:xfs-kern:30636a
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When xfs_mountfs is called by xfs_mount xfs_readsb was called 35 lines
above unconditionally, so there is no need to try to read the superblock
if it's not present. If any other port doesn't have the superblock read at
this point it should just call it directly from it's xfs_mount equivalent.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30603a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
It's completely unused so we might aswell kill it. Note that there is
another t_sema in struct xlog_ticket, which is used and actually an sv_t
despite the name. That one is left untouched by this patch.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30591a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that the ktrace_enter() code is using atomics, the non-power-of-2
buffer sizes - which require modulus operations to get the index - are
showing up as using substantial CPU in the profiles.
Force the buffer sizes to be rounded up to the nearest power of two and
use masking rather than modulus operations to convert the index counter to
the buffer index. This reduces ktrace_enter overhead to 8% of a CPU time,
and again almost halves the trace intensive test runtime.
SGI-PV: 977546
SGI-Modid: xfs-linux-melb:xfs-kern:30538a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
ktrace_enter() is consuming vast amounts of CPU time due to the use of a
single global lock for protecting buffer index increments. Change it to
use per-buffer atomic counters - this reduces ktrace_enter() overhead
during a trace intensive test on a 4p machine from 58% of all CPU time to
12% and halves test runtime.
SGI-PV: 977546
SGI-Modid: xfs-linux-melb:xfs-kern:30537a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
XFS changes the c/mtime of an inode when truncating it to the same size.
The c/mtime is only supposed to change if the size is changed. Not to be
confused with ftruncate, where the c/mtime is supposed to be changed even
if the size is not changed.
The Linux VFS encodes this semantic difference in the flags it sends down
to ->setattr, which XFS currently ignores. We need to make XFS pay
attention to the VFS flags and hence Do The Right Thing.
SGI-PV: 977547
SGI-Modid: xfs-linux-melb:xfs-kern:30536a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
As Dave pointed out after the export ops changes we now always encode the
parent into the filehandle for regular files, but it's not actually needed
when the filesystem is export with no_subtree_check. This one-liner fixes
xfs_fs_encode_fh to skip encoding the parent unless nessecary.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30535a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We can just use xfs_ilock/xfs_iunlock instead and get rid of the ugly
bhv_vrwlock_t.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30533a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Instead of of xfs_get_dir_entry use a macro to get the xfs_inode from the
dentry in the callers and grab the reference manually.
Only grab the reference once as it's fine to keep it over the dmapi calls.
(And even that reference is actually superflous in Linux but I'll leave
that for another patch)
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30531a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Cleanup the unneeded intermediate vnode step in the flushing helpers and
go directly from the xfs_inode to the struct address_space.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30530a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
- use proper goto based unwinding instead of the current mess of
multiple conditionals
- rename ip to inode because that's the normal convention for Linux
inodes while ip is the convention for xfs_inodes
- remove unlikely checks for the default_acl - branches marked unlikely
might lead to extreme branch bredictor slowdons if taken and for some
workloads a default acl is quite common
- properly indent the switch statements
- remove xfs_has_fs_struct as nfsd has a fs_struct in any semi-recent
kernel
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30529a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that we update the log tail LSN less frequently on transaction
completion, we pass the contention straight to the global log state lock
(l_iclog_lock) during transaction completion.
We currently have to take this lock to decrement the iclog reference
count. there is a reference count on each iclog, so we need to take he
global lock for all refcount changes.
When large numbers of processes are all doing small trnasctions, the iclog
reference counts will be quite high, and the state change that absolutely
requires the l_iclog_lock is the except rather than the norm.
Change the reference counting on the iclogs to use atomic_inc/dec so that
we can use atomic_dec_and_lock during transaction completion and avoid the
need for grabbing the l_iclog_lock for every reference count decrement
except the one that matters - the last.
SGI-PV: 975671
SGI-Modid: xfs-linux-melb:xfs-kern:30505a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When hundreds of processors attempt to commit transactions at the same
time, they can contend on the AIL lock when updating the tail LSN held in
the in-core log structure.
At the moment, the tail LSN is only needed when actually writing out an
iclog, so it really does not need to be updated on every single
transaction completion - only those that result in switching iclogs and
flushing them to disk.
The result is that we reduce the number of times we need to grab the AIL
lock and the log grant lock by up to two orders of magnitude on large
processor count machines. The problem has previously been hidden by AIL
lock contention walking the AIL list which was recently solved and
uncovered this issue.
SGI-PV: 975671
SGI-Modid: xfs-linux-melb:xfs-kern:30504a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove open coded checks for the whether the inode is clean and replace
them with an inlined function.
SGI-PV: 977461
SGI-Modid: xfs-linux-melb:xfs-kern:30503a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove the xfs_icluster structure and replace with a radix tree lookup.
We don't need to keep a list of inodes in each cluster around anymore as
we can look them up quickly when we need to. The only time we need to do
this now is during inode writeback.
Factor the inode cluster writeback code out of xfs_iflush and convert it
to use radix_tree_gang_lookup() instead of walking a list of inodes built
when we first read in the inodes.
This remove 3 pointers from each xfs_inode structure and the xfs_icluster
structure per inode cluster. Hence we reduce the cache footprint of the
xfs_inodes by between 5-10% depending on cluster sparseness.
To be truly efficient we need a radix_tree_gang_lookup_range() call to
stop searching once we are past the end of the cluster instead of trying
to find a full cluster's worth of inodes.
Before (ia64):
$ cat /sys/slab/xfs_inode/object_size 536
After:
$ cat /sys/slab/xfs_inode/object_size 512
SGI-PV: 977460
SGI-Modid: xfs-linux-melb:xfs-kern:30502a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When pdflush is writing back inodes, it can get stuck on inode cluster
buffers that are currently under I/O. This occurs when we write data to
multiple inodes in the same inode cluster at the same time.
Effectively, delayed allocation marks the inode dirty during the data
writeback. Hence if the inode cluster was flushed during the writeback of
the first inode, the writeback of the second inode will block waiting for
the inode cluster write to complete before writing it again for the newly
dirtied inode.
Basically, we want to avoid this from happening so we don't block pdflush
and slow down all of writeback. Hence we introduce a non-blocking async
inode flush flag that pdflush uses. If this flag is set, we use
non-blocking operations (e.g. try locks) whereever we can to avoid
blocking or extra I/O being issued.
SGI-PV: 970925
SGI-Modid: xfs-linux-melb:xfs-kern:30501a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The only difference between the functions is one passes an inode for the
lookup, the other passes an inode number. However, they don't do the same
validity checking or set all the same state on the buffer that is returned
yet they should.
Factor the functions into a common implementation.
SGI-PV: 970925
SGI-Modid: xfs-linux-melb:xfs-kern:30500a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove the xfs_refcache, it was only needed while we were still
building for 2.4 kernels.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30472a
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
On a forced shutdown, xfs_finish_reclaim() will skip flushing the inode.
If the inode flush lock is not already held and there is an outstanding
xfs_iflush_done() then we might free the inode prematurely. By acquiring
and releasing the flush lock we will synchronise with xfs_iflush_done().
SGI-PV: 909874
SGI-Modid: xfs-linux-melb:xfs-kern:30468a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Since older kernels may look in the sb_bad_features2 slot for flags,
rather than zeroing it out on fixup, we should make it equal to the
sb_features2 value.
Also, if the ATTR2 flag was not found prior to features2 fixup, it was not
set in the mount flags, so re-check after the fixup so that the current
session will use the feature.
Also fix up the comments to reflect these changes.
SGI-PV: 980085
SGI-Modid: xfs-linux-melb:xfs-kern:30778a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Due to the xfs_dsb_t structure not being 64 bit aligned, the last field of
the on-disk superblock can vary in location This causes problems when the
filesystem gets moved to a different platform, or there is a 32 bit
userspace and 64 bit kernel.
This patch detects the defect at mount time, logs a warning such as:
XFS: correcting sb_features alignment problem
in dmesg and corrects the problem so that everything is OK. it also
blacklists the bad field in the superblock so it does not get used for
something else later on.
SGI-PV: 977636
SGI-Modid: xfs-linux-melb:xfs-kern:30539a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove macro-to-small-function indirection from xfs_sb.h, and remove some
which are completely unused.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30528a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
If the radix_tree_preload() fails, we need to destroy the inode we just
read in before trying again. This could leak xfs_vnode structures when
there is memory pressure. Noticed by Christoph Hellwig.
SGI-PV: 977823
SGI-Modid: xfs-linux-melb:xfs-kern:30606a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
wakeups
Idle state is not being detected properly by the xfsaild push code. The
current idle state is detected by an empty list which may never happen
with mostly idle filesystem or one using lazy superblock counters. A
single dirty item in the list that exists beyond the push target can
result repeated looping attempting to push up to the target because it
fails to check if the push target has been acheived or not.
Fix by considering a dirty list with everything past the target as an idle
state and set the timeout appropriately.
SGI-PV: 977545
SGI-Modid: xfs-linux-melb:xfs-kern:30532a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
the "ikeep" option is set rather than "noikeep".
This regression was introduced in 970451.
With no mount options specified, xfs_parseargs() does the following:
int ikeep = 0;
args->flags |= XFSMNT_BARRIER;
args->flags2 |= XFSMNT2_COMPAT_IOSIZE;
if (!options)
goto done;
It only sets the above two options by default and before, it also used to
set XFSMNT_IDELETE by default.
If options are specified, then
if (!(args->flags & XFSMNT_DMAPI) && !ikeep)
args->flags |= XFSMNT_IDELETE;
is executed later on which is skipped by the "goto done;" above.
The solution is to invert the logic.
SGI-PV: 977771
SGI-Modid: xfs-linux-melb:xfs-kern:30590a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Change -I include directives to find headers in the out-of-tree spot. This
allows a directory containing only xfs files to be built as:
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29878a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Makefile (and Kbuild) would include Makefile-linux-26 I doubt XFS will
really still compile on 2.4; so drop that. This moves Makefile-linux-26
into Makefile and drops Kbuild. Also having wrappers as both Kbuild and
Makefile seemed redundant anyways.
The patch is relatively large because it renames a file, but no functional
changes.
SGI-PV: 971050
SGI-Modid: xfs-linux-melb:xfs-kern:29781a
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
* Add path_put() functions for releasing a reference to the dentry and
vfsmount of a struct path in the right order
* Switch from path_release(nd) to path_put(&nd->path)
* Rename dput_path() to path_put_conditional()
[akpm@linux-foundation.org: fix cifs]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.
Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
<dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
struct path in every place where the stack can be traversed
- it reduces the overall code size:
without patch series:
text data bss dec hex filename
5321639 858418 715768 6895825 6938d1 vmlinux
with patch series:
text data bss dec hex filename
5320026 858418 715768 6894212 693284 vmlinux
This patch:
Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
remove beX_add functions and replace all uses with beX_add_cpu
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Dave Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (62 commits)
[XFS] add __init/__exit mark to specific init/cleanup functions
[XFS] Fix oops in xfs_file_readdir()
[XFS] kill xfs_root
[XFS] keep i_nlink updated and use proper accessors
[XFS] stop updating inode->i_blocks
[XFS] Make xfs_ail_check check less by default
[XFS] Move AIL pushing into it's own thread
[XFS] use generic_permission
[XFS] stop re-checking permissions in xfs_swapext
[XFS] clean up xfs_swapext
[XFS] remove permission check from xfs_change_file_space
[XFS] prevent panic during log recovery due to bogus op_hdr length
[XFS] Cleanup various fid related bits:
[XFS] Fix xfs_lowbit64
[XFS] Remove CFORK macros and use code directly in IFORK and DFORK macros.
[XFS] kill superflous buffer locking (2nd attempt)
[XFS] Use kernel-supplied "roundup_pow_of_two" for simplicity
[XFS] Remove the BPCSHIFT and NB* based macros from XFS.
[XFS] Remove bogus assert
[XFS] optimize XFS_IS_REALTIME_INODE w/o realtime config
...
When xfs_file_readdir() exactly fills a buffer, it can move it's index
past the end of the buffer and dereference it even though the result of
the dereference is never used. On some platforms this causes an oops.
SGI-PV: 976923
SGI-Modid: xfs-linux-melb:xfs-kern:30458a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The only caller (xfs_fs_fill_super) can simplify call igrab on the root
inode.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30393a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
To get the read-only bind mounts in -mm to work correctly with XFS we need
to call the drop_nlink and inc_nlink helpers to monitor the link count.
Add calls to these to xfs_bumplink and xfs_droplink and stop copying over
di_nlink to i_nlink in xfs_validate_fields and vn_revalidate.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30392a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The VFS doesn't use i_blocks, it's only used by generic_fillattr and the
generic quota code which XFS doesn't use. In XFS there is one use to check
whether we have an inline or out of line sumlink, but we can replace that
with a check of the XFS_IFINLINE inode flag.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30391a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Checking the entire AIL on every insert and remove is prohibitively
expensive - the sustained sequntial create rate on a single disk drops
from about 1800/s to 60/s because of this checking resulting in the
xfslogd becoming cpu bound.
By default on debug builds, only check the next and previous entries in
the list to ensure they are ordered correctly. If you really want, define
XFS_TRANS_DEBUG to use the old behaviour.
SGI-PV: 972759
SGI-Modid: xfs-linux-melb:xfs-kern:30372a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When many hundreds to thousands of threads all try to do simultaneous
transactions and the log is in a tail-pushing situation (i.e. full), we
can get multiple threads walking the AIL list and contending on the AIL
lock.
The AIL push is, in effect, a simple I/O dispatch algorithm complicated by
the ordering constraints placed on it by the transaction subsystem. It
really does not need multiple threads to push on it - even when only a
single CPU is pushing the AIL, it can push the I/O out far faster that
pretty much any disk subsystem can handle.
So, to avoid contention problems stemming from multiple list walkers, move
the list walk off into another thread and simply provide a "target" to
push to. When a thread requires a push, it sets the target and wakes the
push thread, then goes to sleep waiting for the required amount of space
to become available in the log.
This mechanism should also be a lot fairer under heavy load as the waiters
will queue in arrival order, rather than queuing in "who completed a push
first" order.
Also, by moving the pushing to a separate thread we can do more
effectively overload detection and prevention as we can keep context from
loop iteration to loop iteration. That is, we can push only part of the
list each loop and not have to loop back to the start of the list every
time we run. This should also help by reducing the number of items we try
to lock and/or push items that we cannot move.
Note that this patch is not intended to solve the inefficiencies in the
AIL structure and the associated issues with extremely large list
contents. That needs to be addresses separately; parallel access would
cause problems to any new structure as well, so I'm only aiming to isolate
the structure from unbounded parallelism here.
SGI-PV: 972759
SGI-Modid: xfs-linux-melb:xfs-kern:30371a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Now that all direct caller of xfs_iaccess are gone we can kill xfs_iaccess
and xfs_access and just use generic_permission with a check_acl callback.
This is required for the per-mount read-only patchset in -mm to work
properly with XFS.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30370a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_swapext should simplify check if we have a writeable file descriptor
instead of re-checking the permissions using xfs_iaccess. Add an
additional check to refuse O_APPEND file descriptors because swapext is
not an append-only write operation.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30369a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Both callers of xfs_change_file_space alreaedy do the file->f_mode &
FMODE_WRITE check to ensure we have a file descriptor that has been opened
for write mode, so there is no need to re-check that with xfs_iaccess.
Especially as the later might wrongly deny it for corner cases like file
descriptor passing through unix domain sockets.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30365a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
A problem was reported where a system panicked in log recovery due to a
corrupt log record. The cause of the corruption is not known but this
change will at least prevent a crash for this specific scenario. Log
recovery definitely needs some more work in this area.
SGI-PV: 974151
SGI-Modid: xfs-linux-melb:xfs-kern:30318a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
- merge xfs_fid2 into it's only caller xfs_dm_inode_to_fh.
- remove xfs_vget and opencode it in the two callers, simplifying
both of them by avoiding the awkward calling convetion.
- assign directly to the dm_fid_t members in various places in the
dmapi code instead of casting them to xfs_fid_t first (which
is identical to dm_fid_t)
SGI-PV: 974747
SGI-Modid: xfs-linux-melb:xfs-kern:30258a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_lowbit64 was broken on 32 bit platforms in a recent cleanup of the xfs
bitops. Fix it back up again.
SGI-PV: 974005
SGI-Modid: xfs-linux-melb:xfs-kern:30202a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently XFS_IFORK_* and XFS_DFORK* are implemented by means of
XFS_CFORK* macros. But given that XFS_IFORK_* operates on an xfs_inode
that embedds and xfs_icdinode_core and XFS_DFORK_* operates on an
xfs_dinode that embedds a xfs_dinode_core one will have to do endian
swapping while the other doesn't. Instead of having the current mess with
the CFORK macros that have byteswapping and non-byteswapping version
(which are inconsistantly named while we're at it) just define each family
of the macros to stand by itself and simplify the whole matter.
A few direct references to the CFORK variants were cleaned up to use IFORK
or DFORK to make this possible.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30163a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
There is no need to lock any page in xfs_buf.c because we operate on our
own address_space and all locking is covered by the buffer semaphore. If
we ever switch back to main blockdeive address_space as suggested e.g. for
fsblock with a similar scheme the locking will have to be totally revised
anyway because the current scheme is neither correct nor coherent with
itself.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30156a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30098a
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
The BPCSHIFT based macros, btoc*, ctob*, offtoc* and ctooff are either not
used or don't need to be used. The NDPP, NDPP, NBBY macros don't need to
be used but instead are replaced directly by PAGE_SIZE and PAGE_CACHE_SIZE
where appropriate. Initial patch and motivation from Nicolas Kaiser.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30096a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This assert is bogus. We can have a forced shutdown occur
between the check for the XLOG_FORCED_SHUTDOWN and the ASSERT. Also, the
logging system shouldn't care about the state of XFS_FORCED_SHUTDOWN, it
should only check XLOG_FORCED_SHUTDOWN. The logging system has it's own
forced shutdown flag so, for the case of a forced shutdown that's not due
to a logging error, we can flush the log.
SGI-PV: 972985
SGI-Modid: xfs-linux-melb:xfs-kern:30029a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
