Commit graph

1347 commits

Author SHA1 Message Date
Steve Wise
9a7666494b RDMA/cxgb3: Set the max_qp_init_rd_atom attribute in query_device
The device attribute max_qp_init_rd_atom is not getting set in cxgb3's
query_device method.  Version 1.0.4 of librdmacm now validates the
user's requested initiator and responder resources against the max
supported by the device.  Since iw_cxgb3 wasn't setting this attribute
(and it defaulted to 0), all rdma_connect()s fail if there are
initiator resources requested by the app.  Fix this by setting the
correct value in iwch_query_device().

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13 15:27:00 -08:00
Joachim Fenkes
51aaa54eb9 IB/ehca: Fix static rate calculation
The IPD (inter-packet delay) formula was a little off and assumed a
fixed physical link rate; fix the formula and query the actual
physical link rate, now that we can get it.  Also, refactor the
calculation into a common function ehca_calc_ipd() and use that
instead of duplicating code.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13 15:27:00 -08:00
Joachim Fenkes
40ebb5615e IB/ehca: Return physical link information in query_port()
Newer firmware versions return physical port information to the
partition, so hand that information to the consumer if it's present.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13 15:26:59 -08:00
Ralph Campbell
f4ad1bcc44 IB/ipath: Fix race with ACK retry timeout list management
When an ACK is received, the QP is removed from the timeout list and
then if there are still pending send WQEs, the QP is put back on the
timeout list. It is possible that another post send has put the QP on
the timeout list thus, a check needs to be made before trying to do it
again or the list is corrupted.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13 15:26:58 -08:00
Ralph Campbell
a6e7550d8f IB/ipath: Fix memory leak in ipath_resize_cq() if copy_to_user() fails
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Patrick Marchand Latifi <patrick.latifi@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-13 15:26:57 -08:00
Linus Torvalds
53173920da Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/fmr_pool: Stop ib_fmr threads from contributing to load average
  IB/ipath: Fix incorrect use of sizeof on msg buffer (function argument)
  IB/ipath: Limit length checksummed in eeprom
  IB/ipath: Fix a race where s_last is updated without lock held
  IB/mlx4: Lock SQ lock in mlx4_ib_post_send()
  IPoIB/cm: Fix receive QP cleanup
2007-10-30 15:26:56 -07:00
Anton Blanchard
3f776e8a25 IB/fmr_pool: Stop ib_fmr threads from contributing to load average
I noticed my machine was at a constant load average of 1. This was
because ib_create_fmr_pool calls kthread_create but does not
immediately wake the thread up.

Change to using kthread_run so we enter ib_fmr_cleanup_thread(), set
TASK_INTERRUPTIBLE, then go to sleep.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 14:57:43 -07:00
Dave Olson
164ef7a252 IB/ipath: Fix incorrect use of sizeof on msg buffer (function argument)
Inside a function declared as

    void foo(char bar[512])

the value of sizeof bar is the size of a pointer, not 512.  So avoid
constructions like this by passing the size explicitly.

Also reduce the size of the buffer to 128 bytes (512 was overly generous).

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 11:05:49 -07:00
Michael Albaugh
627934448e IB/ipath: Limit length checksummed in eeprom
The small eeprom that holds the GUID etc. contains a data-length, but if 
the actual eeprom is new or has been erased, that byte will be 0xFF,
which is greater than the maximum physical length of the eeprom, and
more importantly greater than the length of the buffer we vmalloc'd.
Sanity-check the length to avoid the possbility of reading past end of
buffer.

Signed-off-by: Michael Albaugh <Michael.Albaugh@Qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 10:58:53 -07:00
Ralph Campbell
fffbfeaa68 IB/ipath: Fix a race where s_last is updated without lock held
There is a small window where a send work queue entry could be
overwritten by ib_post_send() because s_last is updated before the
entry is read.

This patch closes the window by acquiring the lock and updating
the last send work queue entry index after reading the wr_id.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 10:57:24 -07:00
Roland Dreier
96db0e0335 IB/mlx4: Lock SQ lock in mlx4_ib_post_send()
Because of a typo, mlx4_ib_post_send() takes the same lock rq.lock as
mlx4_ib_post_recv().  Correct the code so the intended sq.lock is
taken when posting a send.

Noticed by Yossi Leybovitch and pointed out by Jack Morgenstein from
Mellanox.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-30 10:53:54 -07:00
Roland Dreier
09f60f8f54 IPoIB/cm: Fix receive QP cleanup
Commit 1b524963 ("IPoIB/cm: Use common CQ for CM send completions")
changed how the high-order bits of work request IDs were used, which
had the effect that IPOIB_CM_RX_DRAIN_WRID was no longer handled as a
connected mode receive completion.  This leads to the messages

    ib1: cm send completion event with wrid 1073741823 (> 64)
    ib1: RX drain timing out

when an interface with connected mode QPs is brought down.  Fix this
by making sure that both IPOIB_OP_CM and IPOIB_OP_RECV are set in
IPOIB_CM_RX_DRAIN_WRID.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-26 13:44:25 -07:00
Jens Axboe
642f149031 SG: Change sg_set_page() to take length and offset argument
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.

Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 11:20:47 +02:00
Linus Torvalds
0b776eb542 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4_core: Increase command timeout for INIT_HCA to 10 seconds
  IPoIB/cm: Use common CQ for CM send completions
  IB/uverbs: Fix checking of userspace object ownership
  IB/mlx4: Sanity check userspace send queue sizes
  IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))"
  IB/ehca: Enable large page MRs by default
  IB/ehca: Change meaning of hca_cap_mr_pgsize
  IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr()
  IB/ehca: Fix masking error in {,re}reg_phys_mr()
  IB/ehca: Supply QP token for SRQ base QPs
  IPoIB: Use round_jiffies() for ah_reap_task
  RDMA/cma: Fix deadlock destroying listen requests
  RDMA/cma: Add locking around QP accesses
  IB/mthca: Avoid alignment traps when writing doorbells
  mlx4_core: Kill mlx4_write64_raw()
2007-10-23 09:56:11 -07:00
Olof Johansson
c8ac5a7309 IB/ehca: Fix sg_page() fallout
More fallout from sg_page changes:

drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user1':
drivers/infiniband/hw/ehca/ehca_mrmw.c:1779: error: 'struct scatterlist' has no member named 'page'
drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_check_kpages_per_ate':
drivers/infiniband/hw/ehca/ehca_mrmw.c:1835: error: 'struct scatterlist' has no member named 'page'
drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user2':
drivers/infiniband/hw/ehca/ehca_mrmw.c:1870: error: 'struct scatterlist' has no member named 'page'

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 09:12:52 +02:00
Jens Axboe
45711f1af6 [SG] Update drivers to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:19:53 +02:00
Michael S. Tsirkin
1b524963fd IPoIB/cm: Use common CQ for CM send completions
Use the same CQ for CM send completions as for all other IPoIB
completions.  This means all completions are processed via the same
NAPI polling routine.  This should help reduce the number of
interrupts for bi-directional traffic (such as TCP) and fixes "driver
is hogging interrupts" errors reported for IPoIB send side, e.g.
<https://bugs.openfabrics.org/show_bug.cgi?id=508>

To do this, keep a per-interface counter of outstanding send WRs, and
stop the interface when this counter reaches the send queue size to
avoid CQ overruns.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-19 21:39:34 -07:00
Roland Dreier
cbfb50e6e2 IB/uverbs: Fix checking of userspace object ownership
Commit 9ead190b ("IB/uverbs: Don't serialize with ib_uverbs_idr_mutex")
rewrote how userspace objects are looked up in the uverbs module's
idrs, and introduced a severe bug in the process: there is no checking
that an operation is being performed by the right process any more.
Fix this by adding the missing check of uobj->context in __idr_get_uobj().

Apparently everyone is being very careful to only touch their own
objects, because this bug was introduced in June 2006 in 2.6.18, and
has gone undetected until now.

Cc: stable <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-19 20:01:43 -07:00
Anton Arapov
a25de534f8 [INET]: Justification for local port range robustness.
There is a justifying patch for Stephen's patches. Stephen's patches
disallows using a port range of one single port and brakes the meaning
of the 'remaining' variable, in some places it has different meaning.
My patch gives back the sense of 'remaining' variable. It should mean
how many ports are remaining and nothing else. Also my patch allows
using a single port.

  I sure we must be able to use mentioned port range, this does not
restricted by documentation and does not brake current behavior.

usefull links:
Patches posted by Stephen Hemminger
  http://marc.info/?l=linux-netdev&m=119206106218187&w=2
  http://marc.info/?l=linux-netdev&m=119206109918235&w=2

Andrew Morton's comment
  http://marc.info/?l=linux-kernel&m=119248225007737&w=2

1. Allows using a port range of one single port.
2. Gives back sense of 'remaining' variable.

Signed-off-by: Anton Arapov <aarapov@redhat.com>
Acked-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-18 22:00:17 -07:00
Joe Perches
898eb71cb1 Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:28 -07:00
Jack Morgenstein
839041329f IB/mlx4: Sanity check userspace send queue sizes
Add sanity checks to send queue sizes passed in from userspace. The
minimum sq stride value below is taken from the MT25408 PRM (section
11.10, Table 306, log_sq_stride definition).

Without this check, userspace can submit arbitrarily large/small
values for the number of WQEs and the stride, which can crash the
kernel.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-18 09:27:26 -07:00
Roland Dreier
fd312561ad IPoIB: Rewrite "if (!likely(...))" as "if (unlikely(!(...)))"
It's too hard to figure out what "!likely(...)" really means, and who
knows how compilers interpret the hint.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:54:44 -07:00
Joachim Fenkes
8da9ee9c1e IB/ehca: Enable large page MRs by default
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:47:47 -07:00
Joachim Fenkes
abc39d3672 IB/ehca: Change meaning of hca_cap_mr_pgsize
ehca_shca.hca_cap_mr_pgsize now contains all supported page sizes ORed
together. This makes some checks easier to code and understand, plus
we can return this value verbatim in query_hca(), fixing a problem
with SRP (reported by Anton Blanchard -- thanks!).

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:47:24 -07:00
Joachim Fenkes
8c08d50d4f IB/ehca: Fix ehca_encode_hwpage_size() and alloc_fmr()
Simplify ehca_encode_hwpage_size(), fixing an infinite loop for pgsize == 0
in the process. Fix the bug in alloc_fmr() that triggered the loop.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:46:37 -07:00
Joachim Fenkes
9511724da9 IB/ehca: Fix masking error in {,re}reg_phys_mr()
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:45:56 -07:00
Joachim Fenkes
c0c84d566d IB/ehca: Supply QP token for SRQ base QPs
Because hardware reports the SRQ token in RWQEs of SRQ base QPs, supply the
base QP token as SRQ token, so we can properly find the SRQ base QP.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-17 21:45:17 -07:00
Joachim Fenkes
6b08f3ae8e [POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and eHEA drivers
Replace struct ibmebus_dev and struct ibmebus_driver with struct of_device
and struct of_platform_driver, respectively.  Match the external ibmebus
interface and drivers using it.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17 22:30:08 +10:00
Anton Blanchard
69fc507a14 IPoIB: Use round_jiffies() for ah_reap_task
Use round_jiffies() to align the 1 second ah_reap_task with other work
and potentially save power by sleeping cores for longer.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16 12:28:56 -07:00
Sean Hefty
d02d1f5359 RDMA/cma: Fix deadlock destroying listen requests
Deadlock condition reported by Kanoj Sarcar <kanoj@netxen.com>.
The deadlock occurs when a connection request arrives at the same
time that a wildcard listen is being destroyed.

A wildcard listen maintains per device listen requests for each
RDMA device in the system.  The per device listens are automatically
added and removed when RDMA devices are inserted or removed from
the system.

When a wildcard listen is destroyed, rdma_destroy_id() acquires
the rdma_cm's device mutex ('lock') to protect against hot-plug
events adding or removing per device listens.  It then tries to
destroy the per device listens by calling ib_destroy_cm_id() or
iw_destroy_cm_id().  It does this while holding the device mutex.

However, if the underlying iw/ib CM reports a connection request
while this is occurring, the rdma_cm callback function will try
to acquire the same device mutex.  Since we're in a callback,
the ib_destroy_cm_id() or iw_destroy_cm_id() calls will block until
their callback thread returns, but the callback is blocked waiting for
the device mutex.

Fix this by re-working how per device listens are destroyed.  Use
rdma_destroy_id(), which avoids the deadlock, in place of
cma_destroy_listen().  Additional synchronization is added to handle
device hot-plug events and ensure that the id is not destroyed twice.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16 12:25:49 -07:00
Sean Hefty
c5483388bb RDMA/cma: Add locking around QP accesses
If a user allocates a QP on an rdma_cm_id, the rdma_cm will automatically
transition the QP through its states (RTR, RTS, error, etc.)  While the
QP state transitions are occurring, the QP itself must remain valid.
Provide locking around the QP pointer to prevent its destruction while
accessing the pointer.

This fixes an issue reported by Olaf Kirch from Oracle that resulted in
a system crash:

"An incoming connection arrives and we decide to tear down the nascent
 connection.  The remote ends decides to do the same.  We start to shut
 down the connection, and call rdma_destroy_qp on our cm_id. ... Now
 apparently a 'connect reject' message comes in from the other host,
 and cma_ib_handler() is called with an event of IB_CM_REJ_RECEIVED.
 It calls cma_modify_qp_err, which for some odd reason tries to modify
 the exact same QP we just destroyed."

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-16 12:25:00 -07:00
Jens Axboe
53d412fce0 infiniband: sg chaining support
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:20:59 +02:00
Roland Dreier
ab8403c424 IB/mthca: Avoid alignment traps when writing doorbells
Architectures such as ia64 see alignment traps when doing a 64-bit 
read from __be32 doorbell[2] arrays to do doorbell writes in 
mthca_write64().  Fix this by just passing the two halves of the 
doorbell value into mthca_write64().  This actually improves the 
generated code by allowing the compiler to see what's going on better.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-15 20:17:27 -07:00
Moni Shoua
200d1713b4 IB/ipoib: Verify address handle validity on send
When the bonding device senses a carrier loss of its active slave it replaces
that slave with a new one. In between the times when the carrier of an IPoIB
device goes down and ipoib_neigh is destroyed, it is possible that the
bonding driver will send a packet on a new slave that uses an old ipoib_neigh.
This patch detects and prevents this from happenning.

Signed-off-by: Moni Shoua <monis at voltaire.com>
Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com>
Acked-by: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15 14:20:45 -04:00
Moni Shoua
732a2170f4 IB/ipoib: Bound the net device to the ipoib_neigh structue
IPoIB uses a two layer neighboring scheme, such that for each struct neighbour
whose device is an ipoib one, there is a struct ipoib_neigh buddy which is
created on demand at the tx flow by an ipoib_neigh_alloc(skb->dst->neighbour)
call.

When using the bonding driver, neighbours are created by the net stack on behalf
of the bonding (master) device. On the tx flow the bonding code gets an skb such
that skb->dev points to the master device, it changes this skb to point on the
slave device and calls the slave hard_start_xmit function.

Under this scheme, ipoib_neigh_destructor assumption that for each struct
neighbour it gets, n->dev is an ipoib device and hence netdev_priv(n->dev)
can be casted to struct ipoib_dev_priv is buggy.

To fix it, this patch adds a dev field to struct ipoib_neigh which is used
instead of the struct neighbour dev one, when n->dev->flags has the
IFF_MASTER bit set.

Signed-off-by: Moni Shoua <monis at voltaire.com>
Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com>
Acked-by: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15 14:20:45 -04:00
Linus Torvalds
df3d80f5a5 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits)
  [SCSI] gdth: fix CONFIG_ISA build failure
  [SCSI] esp_scsi: remove __dev{init,exit}
  [SCSI] gdth: !use_sg cleanup and use of scsi accessors
  [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
  [SCSI] gdth: Setup proper per-command private data
  [SCSI] gdth: Remove gdth_ctr_tab[]
  [SCSI] gdth: switch to modern scsi host registration
  [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
  [SCSI] gdth: clean up host private data
  [SCSI] gdth: Remove virt hosts
  [SCSI] gdth: Reorder scsi_host_template intitializers
  [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
  [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
  [SCSI] gdth: split out pci probing
  [SCSI] gdth: split out eisa probing
  [SCSI] gdth: split out isa probing
  gdth: Make one abuse of scsi_cmnd less obvious
  [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
  [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution
  [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
  ...
2007-10-15 08:19:33 -07:00
Kay Sievers
7eff2e7a8b Driver core: change add_uevent_var to use a struct
This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.

Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
FUJITA Tomonori
aebd5e476e [SCSI] transport_srp: add rport roles attribute
This adds a 'roles' attribute to rport like transport_fc. The role can
be initiator or target. That is, the initiator driver creates target
remote ports and the target driver creates initiator remote ports.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:37:46 -04:00
FUJITA Tomonori
3236822b1c [SCSI] ib_srp: convert to use the srp transport class
This converts ib_srp to use the srp transport class.

I don't have ib hardware so I've not tested this patch.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:37:42 -04:00
Linus Torvalds
ce9d3c9a6a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (87 commits)
  mlx4_core: Fix section mismatches
  IPoIB: Allow setting policy to ignore multicast groups
  IB/mthca: Mark error paths as unlikely() in post_srq_recv functions
  IB/ipath: Minor fix to ordering of freeing and zeroing of tid pages.
  IB/ipath: Remove redundant link state checks
  IB/ipath: Fix IB_EVENT_PORT_ERR event
  IB/ipath: Better handling of unexpected GPIO interrupts
  IB/ipath: Maintain active time on all chips
  IB/ipath: Fix QHT7040 serial number check
  IB/ipath: Indicate a couple of chip bugs to userspace
  IB/ipath: iba6110 rev4 no longer needs recv header overrun workaround
  IB/ipath: Use counters in ipath_poll and cleanup interrupts in ipath_close
  IB/ipath: Remove duplicate copy of LMC
  IB/ipath: Add ability to set the LMC via the sysfs debugging interface
  IB/ipath: Optimize completion queue entry insertion and polling
  IB/ipath: Implement IB_EVENT_QP_LAST_WQE_REACHED
  IB/ipath: Generate flush CQE when QP is in error state
  IB/ipath: Remove redundant code
  IB/ipath: Future proof eeprom checksum code (contents reading)
  IB/ipath: UC RDMA WRITE with IMMEDIATE doesn't send the immediate
  ...
2007-10-11 19:43:13 -07:00
Stephen Hemminger
227b60f510 [INET]: local port range robustness
Expansion of original idea from Denis V. Lunev <den@openvz.org>

Add robustness and locking to the local_port_range sysctl.
1. Enforce that low < high when setting.
2. Use seqlock to ensure atomic update.

The locking might seem like overkill, but there are
cases where sysadmin might want to change value in the
middle of a DoS attack.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 17:30:46 -07:00
Roland Dreier
9153f66a5b IPoIB: Fix unused variable warning
The conversion to use netdevice internal stats left an unused variable
in ipoib_neigh_free(), since there's no longer any reason to get
netdev_priv() in order to increment dropped packets.  Delete the
unused priv variable.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:30 -07:00
Roland Dreier
de90351219 [IPoIB]: Convert to netdevice internal stats
Use the stats member of struct netdevice in IPoIB, so we can save
memory by deleting the stats member of struct ipoib_dev_priv, and save
code by deleting ipoib_get_stats().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:53:41 -07:00
Stephen Hemminger
3b04ddde02 [NET]: Move hardware header operations out of netdevice.
Since hardware header operations are part of the protocol class
not the device instance, make them into a separate object and
save memory.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:52 -07:00
Ralf Baechle
10d024c1b2 [NET]: Nuke SET_MODULE_OWNER macro.
It's been a useless no-op for long enough in 2.6 so I figured it's time to
remove it.  The number of people that could object because they're
maintaining unified 2.4 and 2.6 drivers is probably rather small.

[ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:13 -07:00
Eric W. Biederman
881d966b48 [NET]: Make the device list and device lookups per namespace.
This patch makes most of the generic device layer network
namespace safe.  This patch makes dev_base_head a
network namespace variable, and then it picks up
a few associated variables.  The functions:
dev_getbyhwaddr
dev_getfirsthwbytype
dev_get_by_flags
dev_get_by_name
__dev_get_by_name
dev_get_by_index
__dev_get_by_index
dev_ioctl
dev_ethtool
dev_load
wireless_process_ioctl

were modified to take a network namespace argument, and
deal with it.

vlan_ioctl_set and brioctl_set were modified so their
hooks will receive a network namespace argument.

So basically anthing in the core of the network stack that was
affected to by the change of dev_base was modified to handle
multiple network namespaces.  The rest of the network stack was
simply modified to explicitly use &init_net the initial network
namespace.  This can be fixed when those components of the network
stack are modified to handle multiple network namespaces.

For now the ifindex generator is left global.

Fundametally ifindex numbers are per namespace, or else
we will have corner case problems with migration when
we get that far.

At the same time there are assumptions in the network stack
that the ifindex of a network device won't change.  Making
the ifindex number global seems a good compromise until
the network stack can cope with ifindex changes when
you change namespaces, and the like.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:10 -07:00
Stephen Hemminger
bea3348eef [NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.

In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.

The signature of the ->poll() call back goes from:

	int foo_poll(struct net_device *dev, int *budget)

to

	int foo_poll(struct napi_struct *napi, int budget)

The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract).  The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.

The napi_struct is to be embedded in the device driver private data
structures.

Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler.  Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.

With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.

Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.

[ Ported to current tree and all drivers converted.  Integrated
  Stephen's follow-on kerneldoc additions, and restored poll_list
  handling to the old style to fix mutual exclusion issues.  -DaveM ]

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:45 -07:00
Or Gerlitz
335a64a5a9 IPoIB: Allow setting policy to ignore multicast groups
The kernel IB stack allows (through the RDMA CM) userspace
applications to join and use multicast groups from the IPoIB MGID
range.  This allows multicast traffic to be handled directly from
userspace QPs, without going through the kernel stack, which gives
better performance for some applications.

However, to fully interoperate with IP multicast, such userspace
applications need to participate in IGMP reports and queries, or else
routers may not forward the multicast traffic to the system where the
application is running.  The simplest way to do this is to share the
kernel IGMP implementation by using the IP_ADD_MEMBERSHIP option to
join multicast groups that are being handled directly in userspace.

However, in such cases, the actual multicast traffic should not also
be handled by the IPoIB interface, because that would burn resources
handling multicast packets that will just be discarded in the kernel.

To handle this, this patch adds lookup on the database used for IB
multicast group reference counting when IPoIB is joining multicast
groups, and if a multicast group is already handled by user space,
then the IPoIB kernel driver ignores the group.  This is controlled by
a per-interface policy flag.  When the flag is set, IPoIB will not
join and attach its QP to a multicast group which already has an entry
in the database; when the flag is cleared, IPoIB will behave as before
this change.

For each IPoIB interface, the /sys/class/net/$intf/umcast attribute
controls the policy flag.  The default value is off/0.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 13:02:30 -07:00
Eli Cohen
55a98e955c IB/mthca: Mark error paths as unlikely() in post_srq_recv functions
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-10 11:24:33 -07:00
Dave Olson
3ac8c70f74 IB/ipath: Minor fix to ordering of freeing and zeroing of tid pages.
Fixed to be the same as everywhere else.  copy and then zero the page *
in the array first, and then pass the copy to the VM routines.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09 21:03:02 -07:00