commit 76e42ae831991c828cffa8c37736ebfb831ad5ec upstream.
When fw_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: e35a8ee599 ("net: sched: fw use RCU")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Fixed small conflict as 'fnew->ifindex' assignment is not protected by
CONFIG_NET_CLS_IND on upstream since a51486266c3 ]
Signed-off-by: Luiz Capitulino <luizcap@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a22730b1b4bf437c6bbfdeff5feddf54be4aeada ]
syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88bd720
("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by
updating kcm_tx_msg(head)->last_skb if partial data is copied so that the
following sendmsg() will resume from the skb.
However, we cannot know how many bytes were copied when we get the error.
Thus, we could mess up the MSG_MORE queue.
When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we
do so for UDP by udp_flush_pending_frames().
Even without this change, when the error occurred, the following sendmsg()
resumed from a wrong skb and the queue was messed up. However, we have
yet to get such a report, and only syzkaller stumbled on it. So, this
can be changed safely.
Note this does not change SOCK_SEQPACKET behaviour.
Fixes: c821a88bd720 ("kcm: Fix memory leak in error path of kcm_sendmsg()")
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230912022753.33327-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4f8a7803119005e87b716874bec07c751efafec ]
The opt_num field is controlled by user mode and is not currently
validated inside the kernel. An attacker can take advantage of this to
trigger an OOB read and potentially leak information.
BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
Read of size 2 at addr ffff88804bc64272 by task poc/6431
CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1
Call Trace:
nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281
nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47
expr_call_ops_eval net/netfilter/nf_tables_core.c:214
nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264
nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23
[..]
Also add validation to genre, subtype and version fields.
Fixes: 11eeef41d5 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ad40b36cd3b04209e2d6c89d252c873d8082a59 ]
kcm_exit_net() should call mutex_destroy() on knet->mutex. This is especially
needed if CONFIG_DEBUG_MUTEXES is enabled.
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230902170708.1727999-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b192812905e4b134f7b7994b079eb647e9d2d37e ]
As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be
read locklessly by unix_dgram_sendmsg().
Let's use READ_ONCE() for sk_err as well.
Note that the writer side is marked by commit cc04410af7de ("af_unix:
annotate lockless accesses to sk->sk_err").
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f31867d0d9d82af757c1e0178b659438f4c1ea3c ]
The existing code incorrectly casted a negative value (the result of a
subtraction) to an unsigned value without checking. For example, if
/proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred
lifetime would jump to 4 billion seconds. On my machine and network the
shortest lifetime that avoided underflow was 3 seconds.
Fixes: 76506a986d ("IPv6: fix DESYNC_FACTOR")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 977ad86c2a1bcaf58f01ab98df5cc145083c489c upstream.
There was a previous attempt to fix an out-of-bounds access in the DCCP
error handlers, but that fix assumed that the error handlers only want
to access the first 8 bytes of the DCCP header. Actually, they also look
at the DCCP sequence number, which is stored beyond 8 bytes, so an
explicit pskb_may_pull() is required.
Fixes: 6706a97fec ("dccp: fix out of bound access in dccp_v4_err()")
Fixes: 1aa9d1a0e7 ("ipv6: dccp: fix out of bound access in dccp_v6_err()")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ea35288c83b3d501a88bc17f2df8f176b5cc96f upstream.
Commit bf5c25d608 ("skbuff: in skb_segment, call zerocopy functions
once per nskb") added the call to zero copy functions in skb_segment().
The change introduced a bug in skb_segment() because skb_orphan_frags()
may possibly change the number of fragments or allocate new fragments
altogether leaving nrfrags and frag to point to the old values. This can
cause a panic with stacktrace like the one below.
[ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc
[ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26
[ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0
[ 194.021892] Call Trace:
[ 194.027422] <TASK>
[ 194.072861] tcp_gso_segment+0x107/0x540
[ 194.082031] inet_gso_segment+0x15c/0x3d0
[ 194.090783] skb_mac_gso_segment+0x9f/0x110
[ 194.095016] __skb_gso_segment+0xc1/0x190
[ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem]
[ 194.107071] dev_qdisc_enqueue+0x16/0x70
[ 194.110884] __dev_queue_xmit+0x63b/0xb30
[ 194.121670] bond_start_xmit+0x159/0x380 [bonding]
[ 194.128506] dev_hard_start_xmit+0xc3/0x1e0
[ 194.131787] __dev_queue_xmit+0x8a0/0xb30
[ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan]
[ 194.141477] dev_hard_start_xmit+0xc3/0x1e0
[ 194.144622] sch_direct_xmit+0xe3/0x280
[ 194.147748] __dev_queue_xmit+0x54a/0xb30
[ 194.154131] tap_get_user+0x2a8/0x9c0 [tap]
[ 194.157358] tap_sendmsg+0x52/0x8e0 [tap]
[ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net]
[ 194.173631] handle_tx+0xcd/0xe0 [vhost_net]
[ 194.176959] vhost_worker+0x76/0xb0 [vhost]
[ 194.183667] kthread+0x118/0x140
[ 194.190358] ret_from_fork+0x1f/0x30
[ 194.193670] </TASK>
In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags
local variable in skb_segment() stale. This resulted in the code hitting
i >= nrfrags prematurely and trying to move to next frag_skb using
list_skb pointer, which was NULL, and caused kernel panic. Move the call
to zero copy functions before using frags and nr_frags.
Fixes: bf5c25d608 ("skbuff: in skb_segment, call zerocopy functions once per nskb")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reported-by: Amit Goyal <agoyal@purestorage.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e99476497687ef9e850748fe6d232264f30bc8f9 upstream.
sctp_mt_check doesn't validate the flag_count field. An attacker can
take advantage of that to trigger a OOB read and leak memory
information.
Add the field validation in the checkentry function.
Fixes: 2e4e6a17af ("[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables")
Cc: stable@vger.kernel.org
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69c5d284f67089b4750d28ff6ac6f52ec224b330 upstream.
The xt_u32 module doesn't validate the fields in the xt_u32 structure.
An attacker may take advantage of this to trigger an OOB read by setting
the size fields with a value beyond the arrays boundaries.
Add a checkentry function to validate the structure.
This was originally reported by the ZDI project (ZDI-CAN-18408).
Fixes: 1b50b8a371 ("[NETFILTER]: Add u32 match")
Cc: stable@vger.kernel.org
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 050d91c03b28ca479df13dfb02bcd2c60dd6a878 upstream.
The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.
Fixes: 886503f34d63 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3b704d4a4a265660e665df51b129e8425216ed1 upstream.
This is a follow up of commit 915d975b2ffa ("net: deal with integer
overflows in kmalloc_reserve()") based on David Laight feedback.
Back in 2010, I failed to realize malicious users could set dev->mtu
to arbitrary values. This mtu has been since limited to 0x7fffffff but
regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack()
to allocate more than IP_MAX_MTU and risk various skb fields overflows.
Fixes: 57e1ab6ead ("igmp: refine skb allocations")
Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Cc: Kyle Zeng <zengyhkyle@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f ]
HFSC assumes that inner classes have an fsc curve, but it is currently
possible for classes without an fsc curve to become parents. This leads
to bugs including a use-after-free.
Don't allow non-root classes without HFSC_FSC to become parents.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230824084905.422-1-markovicbudimir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a171fbec88a2c730b108c7147ac5e7b2f5a02b47 ]
LWTUNNEL_XMIT_CONTINUE is implicitly assumed in ip(6)_finish_output2,
such that any positive return value from a xmit hook could cause
unexpected continue behavior, despite that related skb may have been
freed. This could be error-prone for future xmit hook ops. One of the
possible errors is to return statuses of dst_output directly.
To make the code safer, redefine LWTUNNEL_XMIT_CONTINUE value to
distinguish from dst_output statuses and check the continue
condition explicitly.
Fixes: 3a0af8fd61 ("bpf: BPF for lightweight tunnel infrastructure")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/96b939b85eda00e8df4f7c080f770970a4c5f698.1692326837.git.yan@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 26b5a5712eb85e253724e56a54c17f8519bd8e4e upstream.
Missing NFT_TRANS_PREPARE_ERROR in 1df28fde1270 ("netfilter: nf_tables: add
NFT_TRANS_PREPARE_ERROR to deal with bound set/chain") in 4.19.
Fixes: 1df28fde1270 ("netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain") in 4.19
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bdf399342c5acbd817c9098b6c7ed21f1974312 upstream.
BPF programs that run on connect can rewrite the connect address. For
the connect system call this isn't a problem, because a copy of the address
is made when it is moved into kernel space. However, kernel_connect
simply passes through the address it is given, so the caller may observe
its address value unexpectedly change.
A practical example where this is problematic is where NFS is combined
with a system such as Cilium which implements BPF-based load balancing.
A common pattern in software-defined storage systems is to have an NFS
mount that connects to a persistent virtual IP which in turn maps to an
ephemeral server IP. This is usually done to achieve high availability:
if your server goes down you can quickly spin up a replacement and remap
the virtual IP to that endpoint. With BPF-based load balancing, mounts
will forget the virtual IP address when the address rewrite occurs
because a pointer to the only copy of that address is passed down the
stack. Server failover then breaks, because clients have forgotten the
virtual IP address. Reconnects fail and mounts remain broken. This patch
was tested by setting up a scenario like this and ensuring that NFS
reconnects worked after applying the patch.
Signed-off-by: Jordan Rife <jrife@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0067dfcd9418fd3b0632bc59210d120d038a9c6 ]
The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition
values but if the call to sctp_ulpevent_make_authkey() fails, it returns
-ENOMEM.
This results in calling BUG() inside the sctp_side_effects() function.
Calling BUG() is an over reaction and not helpful. Call WARN_ON_ONCE()
instead.
This code predates git.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b403643d154d15176b060b82f7fc605210033edd ]
There is a shift wrapping bug in this code on 32-bit architectures.
NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long.
Every second 32-bit word of catmap becomes corrupted.
Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a73edab69d3a6623f03817fe950a2d9585f80e4 ]
Similarly to the previous patch: offs can be used in handle_rerrors
without initializing on small payloads; in this case handle_rerrors will
not use it because of the size check, but it doesn't hurt to make sure
it is zero to please scan-build.
This fixes the following warning:
net/9p/trans_virtio.c:539:3: warning: 3rd function call argument is an uninitialized value [core.CallAndMessage]
handle_rerror(req, in_hdr_len, offs, in_pages);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Removal of the sock_hold got lost when backporting commit c3873070247d
("netfilter: nf_queue: fix possible use-after-free") to 4.19
Fixes: 34dc4a6a7f ("netfilter: nf_queue: fix possible use-after-free") in 4.19
Fixed in 4.14 with
https://lore.kernel.org/all/20221024112958.115275475@linuxfoundation.org/
Signed-off-by: Vimal Agrawal <vimal.agrawal@sophos.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
[vbrahmajosyula: The fix to the backport was missed in 4.19]
Signed-off-by: Vamsi Krishna Brahmajosyula <vbrahmajosyula@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d25ddb7e788d34cf27ff1738d11a87cb4b67d446 upstream.
When a client roamed back to a node before it got time to destroy the
pending local entry (i.e. within the same originator interval) the old
global one is directly removed from hash table and left as such.
But because this entry had an extra reference taken at lookup (i.e using
batadv_tt_global_hash_find) there is no way its memory will be reclaimed
at any time causing the following memory leak:
unreferenced object 0xffff0000073c8000 (size 18560):
comm "softirq", pid 0, jiffies 4294907738 (age 228.644s)
hex dump (first 32 bytes):
06 31 ac 12 c7 7a 05 00 01 00 00 00 00 00 00 00 .1...z..........
2c ad be 08 00 80 ff ff 6c b6 be 08 00 80 ff ff ,.......l.......
backtrace:
[<00000000ee6e0ffa>] kmem_cache_alloc+0x1b4/0x300
[<000000000ff2fdbc>] batadv_tt_global_add+0x700/0xe20
[<00000000443897c7>] _batadv_tt_update_changes+0x21c/0x790
[<000000005dd90463>] batadv_tt_update_changes+0x3c/0x110
[<00000000a2d7fc57>] batadv_tt_tvlv_unicast_handler_v1+0xafc/0xe10
[<0000000011793f2a>] batadv_tvlv_containers_process+0x168/0x2b0
[<00000000b7cbe2ef>] batadv_recv_unicast_tvlv+0xec/0x1f4
[<0000000042aef1d8>] batadv_batman_skb_recv+0x25c/0x3a0
[<00000000bbd8b0a2>] __netif_receive_skb_core.isra.0+0x7a8/0xe90
[<000000004033d428>] __netif_receive_skb_one_core+0x64/0x74
[<000000000f39a009>] __netif_receive_skb+0x48/0xe0
[<00000000f2cd8888>] process_backlog+0x174/0x344
[<00000000507d6564>] __napi_poll+0x58/0x1f4
[<00000000b64ef9eb>] net_rx_action+0x504/0x590
[<00000000056fa5e4>] _stext+0x1b8/0x418
[<00000000878879d6>] run_ksoftirqd+0x74/0xa4
unreferenced object 0xffff00000bae1a80 (size 56):
comm "softirq", pid 0, jiffies 4294910888 (age 216.092s)
hex dump (first 32 bytes):
00 78 b1 0b 00 00 ff ff 0d 50 00 00 00 00 00 00 .x.......P......
00 00 00 00 00 00 00 00 50 c8 3c 07 00 00 ff ff ........P.<.....
backtrace:
[<00000000ee6e0ffa>] kmem_cache_alloc+0x1b4/0x300
[<00000000d9aaa49e>] batadv_tt_global_add+0x53c/0xe20
[<00000000443897c7>] _batadv_tt_update_changes+0x21c/0x790
[<000000005dd90463>] batadv_tt_update_changes+0x3c/0x110
[<00000000a2d7fc57>] batadv_tt_tvlv_unicast_handler_v1+0xafc/0xe10
[<0000000011793f2a>] batadv_tvlv_containers_process+0x168/0x2b0
[<00000000b7cbe2ef>] batadv_recv_unicast_tvlv+0xec/0x1f4
[<0000000042aef1d8>] batadv_batman_skb_recv+0x25c/0x3a0
[<00000000bbd8b0a2>] __netif_receive_skb_core.isra.0+0x7a8/0xe90
[<000000004033d428>] __netif_receive_skb_one_core+0x64/0x74
[<000000000f39a009>] __netif_receive_skb+0x48/0xe0
[<00000000f2cd8888>] process_backlog+0x174/0x344
[<00000000507d6564>] __napi_poll+0x58/0x1f4
[<00000000b64ef9eb>] net_rx_action+0x504/0x590
[<00000000056fa5e4>] _stext+0x1b8/0x418
[<00000000878879d6>] run_ksoftirqd+0x74/0xa4
Releasing the extra reference from batadv_tt_global_hash_find even at
roam back when batadv_tt_global_free is called fixes this memory leak.
Cc: stable@vger.kernel.org
Fixes: 068ee6e204 ("batman-adv: roaming handling mechanism redesign")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by; Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8e42a2b0addf238be8b3b37dcd9795a5c1be459 upstream.
If the user set an MTU value, it usually means that there are special
requirements for the MTU. But if an interface gots activated, the MTU was
always recalculated and then the user set value was overwritten.
The only reason why this user set value has to be overwritten, is when the
MTU has to be decreased because batman-adv is not able to transfer packets
with the user specified size.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6a953cce8d0438391e6da48c8d0793d3fbfcfa6 upstream.
If an interface changes the MTU, it is expected that an NETDEV_PRECHANGEMTU
and NETDEV_CHANGEMTU notification events is triggered. This worked fine for
.ndo_change_mtu based changes because core networking code took care of it.
But for auto-adjustments after hard-interfaces changes, these events were
simply missing.
Due to this problem, non-batman-adv components weren't aware of MTU changes
and thus couldn't perform their own tasks correctly.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5310760af1d4fbea1452bfc77db5f9a680f7ae47 upstream.
When two threads run proc_do_sync_threshold() in parallel,
data races could happen between the two memcpy():
Thread-1 Thread-2
memcpy(val, valp, sizeof(val));
memcpy(valp, val, sizeof(val));
This race might mess up the (struct ctl_table *) table->data,
so we add a mutex lock to serialize them.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/B6988E90-0A1E-4B85-BF26-2DAF6D482433@gmail.com/
Signed-off-by: Sishuai Gong <sishuai.system@gmail.com>
Acked-by: Simon Horman <horms@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b90af292e71b20d03b837d39406acfbdc5d4b2a upstream.
The ipvs module parse the user buffer and save it to sysctl,
then check if the value is valid. invalid value occurs
over a period of time.
Here, I add a variable, struct ctl_table tmp, used to read
the value from the user buffer, and save only when it is valid.
I delete proc_do_sync_mode and use extra1/2 in table for the
proc_dointvec_minmax call.
Fixes: f73181c828 ("ipvs: add support for sync threads")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[Julian: Backport by changing SYSCTL_ZERO/SYSCTL_ONE to zero/one]
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit da71714e359b64bd7aab3bd56ec53f307f058133 ]
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <vladimir.oltean@nxp.com> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+a3618a167af2021433cd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/20230816225759.g25x76kmgzya2gei@skbuf/T/
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cba3f1786916063261e3e5ccbb803abc325b24ef ]
We changed tcp_poll() over time, bug never updated dccp.
Note that we also could remove dccp instead of maintaining it.
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230818015820.2701595-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76f33296d2e09f63118db78125c95ef56df438e9 ]
*prot->memory_pressure is read/writen locklessly, we need
to add proper annotations.
A recent commit added a new race, it is time to audit all accesses.
Fixes: 2d0c88e84e48 ("sock: Fix misuse of sk_under_memory_pressure()")
Fixes: 4d93df0abd ("[SCTP]: Rewrite of sctp buffer management code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Abel Wu <wuyun.abel@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230818015132.2699348-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d1e0e61d617ba17aa516db707aa871387566bbf7 upstream.
According to all consumers code of attrs[XFRMA_SEC_CTX], like
* verify_sec_ctx_len(), convert to xfrm_user_sec_ctx*
* xfrm_state_construct(), call security_xfrm_state_alloc whose prototype
is int security_xfrm_state_alloc(.., struct xfrm_user_sec_ctx *sec_ctx);
* copy_from_user_sec_ctx(), convert to xfrm_user_sec_ctx *
...
It seems that the expected parsing result for XFRMA_SEC_CTX should be
structure xfrm_user_sec_ctx, and the current xfrm_sec_ctx is confusing
and misleading (Luckily, they happen to have same size 8 bytes).
This commit amend the policy structure to xfrm_user_sec_ctx to avoid
ambiguity.
Fixes: cf5cb79f69 ("[XFRM] netlink: Establish an attribute policy")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4dd0d3a2f64b8bd8029ec70f52bdbebd0644408 upstream.
In the real workload, I encountered an issue which could cause the RTO
timer to retransmit the skb per 1ms with linear option enabled. The amount
of lost-retransmitted skbs can go up to 1000+ instantly.
The root cause is that if the icsk_rto happens to be zero in the 6th round
(which is the TCP_THIN_LINEAR_RETRIES value), then it will always be zero
due to the changed calculation method in tcp_retransmit_timer() as follows:
icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX);
Above line could be converted to
icsk->icsk_rto = min(0 << 1, TCP_RTO_MAX) = 0
Therefore, the timer expires so quickly without any doubt.
I read through the RFC 6298 and found that the RTO value can be rounded
up to a certain value, in Linux, say TCP_RTO_MIN as default, which is
regarded as the lower bound in this patch as suggested by Eric.
Fixes: 36e31b0af5 ("net: TCP thin linear timeouts")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9bfab6d23a2865966a4f89a96536fbf23f83bc8c upstream.
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.
As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.
Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:
net.netfilter.nf_conntrack_sctp_timeout_shutdown_recd = 0
net.netfilter.nf_conntrack_sctp_timeout_shutdown_sent = 0
This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.
Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2d0c88e84e483982067a82073f6125490ddf3614 ]
The status of global socket memory pressure is updated when:
a) __sk_mem_raise_allocated():
enter: sk_memory_allocated(sk) > sysctl_mem[1]
leave: sk_memory_allocated(sk) <= sysctl_mem[0]
b) __sk_mem_reduce_allocated():
leave: sk_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sysctl_mem[0]
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Fixes: e1aab161e0 ("socket: initial cgroup code.")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23185c6aed1ffb8fc44087880ba2767aba493779 ]
Do not allow to insert elements from datapath to objects maps.
Fixes: 8aeff920dc ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6018a266279b1a75143c7c0804dd08a5fc4c3e0b ]
When ip_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ip_vti device sends IPv6 packets.
As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fd41f1ba638938c9a1195d09bc6fa3be2712f25 ]
When ipv6_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ipv6_vti device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
vti6_tnl_xmit+0x3e6/0x1ee0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
Allocated by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
netlink_sendmsg+0x9b1/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
____kasan_slab_free+0x160/0x1c0
slab_free_freelist_hook+0x11b/0x220
kmem_cache_free+0xf0/0x490
skb_free_head+0x17f/0x1b0
skb_release_data+0x59c/0x850
consume_skb+0xd2/0x170
netlink_unicast+0x54f/0x7f0
netlink_sendmsg+0x926/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff88802e08ed00
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 194 bytes inside of
freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80)
As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53223f2ed1ef5c90dad814daaaefea4e68a933c8 ]
When the xfrm device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when the xfrm device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff8881111458ef by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
xfrmi_xmit+0x173/0x1ca0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:intel_idle_hlt+0x23/0x30
Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4
RSP: 0018:ffffc90000197d78 EFLAGS: 00000246
RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5
RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50
RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d
R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000
cpuidle_enter_state+0xd3/0x6f0
cpuidle_enter+0x4e/0xa0
do_idle+0x2fe/0x3c0
cpu_startup_entry+0x18/0x20
start_secondary+0x200/0x290
secondary_startup_64_no_verify+0x167/0x16b
</TASK>
Allocated by task 939:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
inet6_ifa_notify+0x118/0x230
__ipv6_ifa_notify+0x177/0xbe0
addrconf_dad_completed+0x133/0xe00
addrconf_dad_work+0x764/0x1390
process_one_work+0xa32/0x16f0
worker_thread+0x67d/0x10c0
kthread+0x344/0x440
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888111145800
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 239 bytes inside of
freed 640-byte region [ffff888111145800, ffff888111145a80)
As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
