[ Upstream commit c37b6908f7b2bd24dcaaf14a180e28c9132b9c58 ]
fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both
PCI and VIO buses. struct notifier_block is a linked list node, so this
causes any notifiers later registered to either bus type to also be
registered to the other since they share the same node.
This causes issues in (at least) the vgaarb code, which registers a
notifier for PCI buses. pci_notify() ends up being called on a vio
device, converted with to_pci_dev() even though it's not a PCI device,
and finally makes a bad access in vga_arbiter_add_pci_device() as
discovered with KASAN:
BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00
Read of size 4 at addr c000000264c26fdc by task swapper/0/1
Call Trace:
dump_stack_lvl+0x1bc/0x2b8 (unreliable)
print_report+0x3f4/0xc60
kasan_report+0x244/0x698
__asan_load4+0xe8/0x250
vga_arbiter_add_pci_device+0x60/0xe00
pci_notify+0x88/0x444
notifier_call_chain+0x104/0x320
blocking_notifier_call_chain+0xa0/0x140
device_add+0xac8/0x1d30
device_register+0x58/0x80
vio_register_device_node+0x9ac/0xce0
vio_bus_scan_register_devices+0xc4/0x13c
__machine_initcall_pseries_vio_device_init+0x94/0xf0
do_one_initcall+0x12c/0xaa8
kernel_init_freeable+0xa48/0xba8
kernel_init+0x64/0x400
ret_from_kernel_thread+0x5c/0x64
Fix this by creating separate notifier_block structs for each bus type.
Fixes: d6b9a81b2a ("powerpc: IOMMU fault injection")
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Add #ifdef to fix CONFIG_IBMVIO=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230322035322.328709-1-ruscur@russell.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b51ba4fe2e134b631f9c8f45423707aab71449b5 upstream.
The assembler says:
arch/powerpc/kernel/head_32.S:1095: Warning: invalid register expression
It's objecting to the use of r0 as the RA argument. That's because
when RA = 0 the literal value 0 is used, rather than the content of
r0, making the use of r0 in the source potentially confusing.
Fix it to use a literal 0, the generated code is identical.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2b69ac8e1cddff6f808fc7415907179eab4aae9e.1596693679.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98ecc6768e8fdba95da1fc1efa0ef2d769e7fe1c upstream.
When building a 32 bit powerpc kernel with Binutils 2.31.1 this warning
is emitted:
powerpc-linux-gnu-ld: warning: orphan section `.branch_lt' from
`arch/powerpc/kernel/head_44x.o' being placed in section `.branch_lt'
As of binutils commit 2d7ad24e8726 ("Support PLT16 relocs against local
symbols")[1], 32 bit targets can produce .branch_lt sections in their
output.
Include these symbols in the .data section as the ppc64 kernel does.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=2d7ad24e8726ba4c45c9e67be08223a146a837ce
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Alan Modra <amodra@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c3ff2a5193fa61b1b284cfb1d79628814ed0e95a ]
This functionality was tentatively added in the past
(commit 6533b7c16e ("powerpc: Initial stack protector
(-fstack-protector) support")) but had to be reverted
(commit f2574030b0 ("powerpc: Revert the initial stack
protector support") because of GCC implementing it differently
whether it had been built with libc support or not.
Now, GCC offers the possibility to manually set the
stack-protector mode (global or tls) regardless of libc support.
This time, the patch selects HAVE_STACKPROTECTOR only if
-mstack-protector-guard=tls is supported by GCC.
On PPC32, as register r2 points to current task_struct at
all time, the stack_canary located inside task_struct can be
used directly by using the following GCC options:
-mstack-protector-guard=tls
-mstack-protector-guard-reg=r2
-mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary))
The protector is disabled for prom_init and bootx_init as
it is too early to handle it properly.
$ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT
[ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64
[ 134.943666]
[ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835
[ 134.963380] Call Trace:
[ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable)
[ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260
[ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64
[ 134.982769] [c6615e00] [ffffffff] 0xffffffff
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Stable-dep-of: 25ea739ea1d4 ("powerpc: Fail build if using recordmcount with binutils v2.37")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4f3175979e62de3b929bfa54a0db4b87d36257a7 upstream.
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the
/proc/powerpc/rtas/firmware_update interface to prepare a system
firmware update yields a BUG():
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000
REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c
CFAR: c0000000001fbd34 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP usercopy_abort+0xa0/0xb0
LR usercopy_abort+0x9c/0xb0
Call Trace:
usercopy_abort+0x9c/0xb0 (unreliable)
__check_heap_object+0x1b4/0x1d0
__check_object_size+0x2d0/0x380
rtas_flash_write+0xe4/0x250
proc_reg_write+0xfc/0x160
vfs_write+0xfc/0x4e0
ksys_write+0x90/0x160
system_call_exception+0x178/0x320
system_call_common+0x160/0x2c4
The blocks of the firmware image are copied directly from user memory
to objects allocated from flash_block_cache, so flash_block_cache must
be created using kmem_cache_create_usercopy() to mark it safe for user
access.
Fixes: 6d07d1cd30 ("usercopy: Restrict non-usercopy caches to size 0")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[mpe: Trim and indent oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 994da93d196866f914c9d64aafb86e95e3decbb2 ]
The purpose of this patch is to move platform specific
mmu-xxx.h files in platform directories like pte-xxx.h files.
In the meantime this patch creates common nohash and
nohash/32 + nohash/64 mmu.h files for future common parts.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Stable-dep-of: 66b2ca086210 ("powerpc/64s/radix: Fix soft dirty tracking")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 271208ee5e335cb1ad280d22784940daf7ddf820 ]
Using memcpy() isn't safe when buf is identical to rtas_err_buf, which
can happen during boot before slab is up. Full context which may not
be obvious from the diff:
if (altbuf) {
buf = altbuf;
} else {
buf = rtas_err_buf;
if (slab_is_available())
buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
}
if (buf)
memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
This was found by inspection and I'm not aware of it causing problems
in practice. It appears to have been introduced by commit
033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the
old ppc64 version of this code did not have this problem.
Use memmove() instead.
Fixes: 033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 836b5b9fcc8e09cea7e8a59a070349a00e818308 ]
Some RTAS functions that have work area parameters impose alignment
requirements on the work area passed to them by the OS. Examples
include:
- ibm,configure-connector
- ibm,update-nodes
- ibm,update-properties
4KB is the greatest alignment required by PAPR for such
buffers. rtas_data_buf used to have a __page_aligned attribute in the
arch/ppc64 days, but that was changed to __cacheline_aligned for
unknown reasons by commit 033ef338b6 ("powerpc: Merge rtas.c into
arch/powerpc/kernel"). That works out to 128-byte alignment
on ppc64, which isn't right.
This was found by inspection and I'm not aware of any real problems
caused by this. Either current RTAS implementations don't enforce the
alignment constraints, or rtas_data_buf is always being placed at a
4KB boundary by accident (or both, perhaps).
Use __aligned(SZ_4K) to ensure the rtas_data_buf has alignment
appropriate for all users.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 033ef338b6 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-6-26929c8cce78@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bce6243848dfd0ff7c2be6e8d82ab9b1e6c7858 ]
The first symbol exports of RTAS functions and data came with the (now
removed) scanlog driver in 2003:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=f92e361842d5251e50562b09664082dcbd0548bb
At the time this was applied, EXPORT_SYMBOL_GPL() was very new, and
the exports of rtas_call() etc have remained non-GPL. As new APIs have
been added to the RTAS subsystem, their symbol exports have followed
the convention set by existing code.
However, the historical evidence is that RTAS function exports have been
added over time only to satisfy the needs of in-kernel users, and these
clients must have fairly intimate knowledge of how the APIs work to use
them safely. No out of tree users are known, and future ones seem
unlikely.
Arguably the default for RTAS symbols should have become
EXPORT_SYMBOL_GPL once it was available. Let's make it so now, and
exceptions can be evaluated as needed.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230124140448.45938-3-nathanl@linux.ibm.com
Stable-dep-of: 836b5b9fcc8e ("powerpc/rtas: ensure 4KB alignment for rtas_data_buf")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream.
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ed2213bfb192ab51f09f12e9b49b5d482c6493f3 ]
rtas_os_term() is called during panic. Its behavior depends on a couple
of conditions in the /rtas node of the device tree, the traversal of
which entails locking and local IRQ state changes. If the kernel panics
while devtree_lock is held, rtas_os_term() as currently written could
hang.
Instead of discovering the relevant characteristics at panic time,
cache them in file-static variables at boot. Note the lookup for
"ibm,extended-os-term" is converted to of_property_read_bool() since it
is a boolean property, not an RTAS function token.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Incorporate suggested change from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 110a1fcb6c4d55144d8179983a475f17a1d6f832 ]
In pci_add_device_node_info(), use of_node_put() to drop the reference
to 'parent' returned by of_get_parent() to keep refcount balance.
Fixes: cca87d303c ("powerpc/pci: Refactor pci_dn")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20220701131750.240170-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca829e05d3d4f728810cc5e4b468d9ebc7745eb3 ]
On 64-bit, calling jump_label_init() in setup_feature_keys() is too
late because static keys may be used in subroutines of
parse_early_param() which is again subroutine of early_init_devtree().
For example booting with "threadirqs":
static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init()
WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120
...
NIP static_key_enable_cpuslocked+0xfc/0x120
LR static_key_enable_cpuslocked+0xf8/0x120
Call Trace:
static_key_enable_cpuslocked+0xf8/0x120 (unreliable)
static_key_enable+0x30/0x50
setup_forced_irqthreads+0x28/0x40
do_early_param+0xa0/0x108
parse_args+0x290/0x4e0
parse_early_options+0x48/0x5c
parse_early_param+0x58/0x84
early_init_devtree+0xd4/0x518
early_setup+0xb4/0x214
So call jump_label_init() just before parse_early_param() in
early_init_devtree().
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[mpe: Add call trace to change log and minor wording edits.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220726015747.11754-1-zhouzhouyi@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8d48562a2729742f767b0fdd994d6b2a56a49c63 upstream.
The recent change to get_phb_number() causes a DEBUG_ATOMIC_SLEEP
warning on some systems:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
1 lock held by swapper/1:
#0: c157efb0 (hose_spinlock){+.+.}-{2:2}, at: pcibios_alloc_controller+0x64/0x220
Preemption disabled at:
[<00000000>] 0x0
CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0-yocto-standard+ #1
Call Trace:
[d101dc90] [c073b264] dump_stack_lvl+0x50/0x8c (unreliable)
[d101dcb0] [c0093b70] __might_resched+0x258/0x2a8
[d101dcd0] [c0d3e634] __mutex_lock+0x6c/0x6ec
[d101dd50] [c0a84174] of_alias_get_id+0x50/0xf4
[d101dd80] [c002ec78] pcibios_alloc_controller+0x1b8/0x220
[d101ddd0] [c140c9dc] pmac_pci_init+0x198/0x784
[d101de50] [c140852c] discover_phbs+0x30/0x4c
[d101de60] [c0007fd4] do_one_initcall+0x94/0x344
[d101ded0] [c1403b40] kernel_init_freeable+0x1a8/0x22c
[d101df10] [c00086e0] kernel_init+0x34/0x160
[d101df30] [c001b334] ret_from_kernel_thread+0x5c/0x64
This is because pcibios_alloc_controller() holds hose_spinlock but
of_alias_get_id() takes of_mutex which can sleep.
The hose_spinlock protects the phb_bitmap, and also the hose_list, but
it doesn't need to be held while get_phb_number() calls the OF routines,
because those are only looking up information in the device tree.
So fix it by having get_phb_number() take the hose_spinlock itself, only
where required, and then dropping the lock before returning.
pcibios_alloc_controller() then needs to take the lock again before the
list_add() but that's safe, the order of the list is not important.
Fixes: 0fe1e96fef0a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220815065550.1303620-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f4b39e88b42d13366b831270306326b5c20971ca ]
The recent change to the PHB numbering logic has a logic error in the
handling of "ibm,opal-phbid".
When an "ibm,opal-phbid" property is present, &prop is written to and
ret is set to zero.
The following call to of_alias_get_id() is skipped because ret == 0.
But then the if (ret >= 0) is true, and the body of that if statement
sets prop = ret which throws away the value that was just read from
"ibm,opal-phbid".
Fix the logic by only doing the ret >= 0 check in the of_alias_get_id()
case.
Fixes: 0fe1e96fef0a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias")
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220802105723.1055178-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fe1e96fef0a5c53b4c0d1500d356f3906000f81 ]
Other Linux architectures use DT property 'linux,pci-domain' for
specifying fixed PCI domain of PCI controller specified in Device-Tree.
And lot of Freescale powerpc boards have defined numbered pci alias in
Device-Tree for every PCIe controller which number specify preferred PCI
domain.
So prefer usage of DT property 'linux,pci-domain' (via function
of_get_pci_domain_nr()) and DT pci alias (via function
of_alias_get_id()) on powerpc architecture for assigning PCI domain to
PCI controller.
Fixes: 63a72284b1 ("powerpc/pci: Assign fixed PHB number based on device-tree properties")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220706102148.5060-2-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7bc08056a6dabc3a1442216daf527edf61ac24b6 upstream.
Add a special case to block_rtas_call() to allow the ibm,platform-dump RTAS
call through the RTAS filter if the buffer address is 0.
According to PAPR, ibm,platform-dump is called with a null buffer address
to notify the platform firmware that processing of a particular dump is
finished.
Without this, on a pseries machine with CONFIG_PPC_RTAS_FILTER enabled, an
application such as rtas_errd that is attempting to retrieve a dump will
encounter an error at the end of the retrieval process.
Fixes: bd59380c5ba4 ("powerpc/rtas: Restrict RTAS requests from userspace")
Cc: stable@vger.kernel.org
Reported-by: Sathvika Vasireddy <sathvika@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220614134952.156010-1-ajd@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d51f86cfd8e378d4907958db77da3074f6dce3ba upstream.
The dssall ("Data Stream Stop All") instruction is obsolete altogether
with other Data Cache Instructions since ISA 2.03 (year 2006).
LLVM IAS does not support it but PPC970 seems to be using it.
This switches dssall to .long as there is no much point in fixing LLVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-6-aik@ozlabs.ru
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1b29ba2f2c171b9bea73be993bfdf0a62d37d15 ]
The following KASAN warning was reported in our kernel.
BUG: KASAN: stack-out-of-bounds in get_wchan+0x188/0x250
Read of size 4 at addr d216f958 by task ps/14437
CPU: 3 PID: 14437 Comm: ps Tainted: G O 5.10.0 #1
Call Trace:
[daa63858] [c0654348] dump_stack+0x9c/0xe4 (unreliable)
[daa63888] [c035cf0c] print_address_description.constprop.3+0x8c/0x570
[daa63908] [c035d6bc] kasan_report+0x1ac/0x218
[daa63948] [c00496e8] get_wchan+0x188/0x250
[daa63978] [c0461ec8] do_task_stat+0xce8/0xe60
[daa63b98] [c0455ac8] proc_single_show+0x98/0x170
[daa63bc8] [c03cab8c] seq_read_iter+0x1ec/0x900
[daa63c38] [c03cb47c] seq_read+0x1dc/0x290
[daa63d68] [c037fc94] vfs_read+0x164/0x510
[daa63ea8] [c03808e4] ksys_read+0x144/0x1d0
[daa63f38] [c005b1dc] ret_from_syscall+0x0/0x38
--- interrupt: c00 at 0x8fa8f4
LR = 0x8fa8cc
The buggy address belongs to the page:
page:98ebcdd2 refcount:0 mapcount:0 mapping:00000000 index:0x2 pfn:0x1216f
flags: 0x0()
raw: 00000000 00000000 01010122 00000000 00000002 00000000 ffffffff 00000000
raw: 00000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
d216f800: 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00
d216f880: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>d216f900: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
^
d216f980: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 00
d216fa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
After looking into this issue, I find the buggy address belongs
to the task stack region. It seems KASAN has something wrong.
I look into the code of __get_wchan in x86 architecture and
find the same issue has been resolved by the commit
f7d27c35dd ("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to powerpc architecture too.
As Andrey Ryabinin said, get_wchan() is racy by design, it may
access volatile stack of running task, thus it may access
redzone in a stack frame and cause KASAN to warn about this.
Use READ_ONCE_NOCHECK() to silence these warnings.
Reported-by: Wanming Hu <huwanming@huaweil.com>
Signed-off-by: He Ying <heying24@huawei.com>
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121014418.155675-1-heying24@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8e1278444446fc97778a5e5c99bca1ce0bbc5ec9 upstream.
The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.
To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.
The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.
The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.
The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.
Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.
To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.
Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.
On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.
It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/
Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.
Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.
Fixes: 87fec0514f ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds")
Cc: stable@vger.kernel.org # v3.13+
Reported-by: Ariel Miculas <ariel.miculas@belden.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b793a01000122d2bd133ba451a76cc135b5e162c ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from powersave_off().
Fixes: 302eca184f ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c5ed82b800d8615cdda00729e7b62e5899f0b13 ]
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bba496656a73fc1d1330b49c7f82843836e9feb1 upstream.
Boot fails with GCC latent entropy plugin enabled.
This is due to early boot functions trying to access 'latent_entropy'
global data while the kernel is not relocated at its final
destination yet.
As there is no way to tell GCC to use PTRRELOC() to access it,
disable latent entropy plugin in early_32.o and feature-fixups.o and
code-patching.o
Fixes: 38addce8b6 ("gcc-plugins: Add latent_entropy plugin")
Cc: stable@vger.kernel.org # v4.9+
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215217
Link: https://lore.kernel.org/r/2bac55483b8daf5b1caa163a45fa5f9cdbe18be4.1640178426.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 219572d2fc4135b5ce65c735d881787d48b10e71 ]
Kdump can be triggered after panic_notifers since commit f06e5153f4
("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump
after panic_notifers") introduced crash_kexec_post_notifiers option.
But using this option would mean smp_send_stop(), that marks all other
CPUs as offline, gets called before kdump is triggered. As a result,
kdump routines fail to save other CPUs' registers. To fix this, kdump
friendly crash_smp_send_stop() function was introduced with kernel
commit 0ee59413c9 ("x86/panic: replace smp_send_stop() with kdump
friendly version in panic path"). Override this kdump friendly weak
function to handle crash_kexec_post_notifiers option appropriately
on powerpc.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
[Fixed signature of crash_stop_this_cpu() - reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207103719.91117-1-hbathini@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4ac0d249a5db80e79d573db9e4ad29354b643a8 ]
setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled.
Fixes the following W=1 warning when CONFIG_PROFILING=n:
linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dad4ba68a2483fc80d70b9dc90bbe16e1f27263 ]
It is possible for all CPUs to miss the pending cpumask becoming clear,
and then nobody resetting it, which will cause the lockup detector to
stop working. It will eventually expire, but watchdog_smp_panic will
avoid doing anything if the pending mask is clear and it will never be
reset.
Order the cpumask clear vs the subsequent test to close this race.
Add an extra check for an empty pending mask when the watchdog fires and
finds its bit still clear, to try to catch any other possible races or
bugs here and keep the watchdog working. The extra test in
arch_touch_nmi_watchdog is required to prevent the new warning from
firing off.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Debugged-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1d2b210ffa52d60acabbf7b6af3ef7e1e69cda0 ]
for_each_node_by_type performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_node_by_type(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1448051604-25256-6-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 869fb7e5aecbc163003f93f36dcc26d0554319f6 ]
prom_getprop() can return PROM_ERROR. Binary operator can not identify
it.
Fixes: 94d2dde738 ("[POWERPC] Efika: prune fixups and make them more carefull")
Signed-off-by: Peiwei Hu <jlu.hpw@foxmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/tencent_BA28CC6897B7C95A92EB8C580B5D18589105@qq.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
upstream commit 030905920f32e91a52794937f67434ac0b3ea41a
Add a helper to return the stf_barrier type for the current processor.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3bd5d7f96ea1547991ac2ce3137dc2b220bae285.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a6cae77f1bc89368a4e2822afcddc45c3062d499 ]
commit 7c6986ade69e ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()")
introduces udelay() call without including the linux/delay.h header.
This may happen to work on master but the header that declares the
functionshould be included nonetheless.
Fixes: 7c6986ade69e ("powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729180103.15578-1-msuchanek@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2fb0a2c989837c976b68233496bbaefb47cd3d6f upstream.
The comment here is wrong, the addi reads from r2 not r12. The code is
correct, 0x38420000 = addi r2,r2,0.
Fixes: a61674bdfc ("powerpc/module: Handle R_PPC64_ENTRY relocations")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bab26238bbd44d5a4687c0a64fd2c7f2755ea937 ]
printk_safe_flush_on_panic() has special lock breaking code for the case
where we panic()ed with the console lock held. It relies on panic IPI
causing other CPUs to mark themselves offline.
Do as most other architectures do.
This effectively reverts commit de6e5d3841 ("powerpc: smp_send_stop do
not offline stopped CPUs"), unfortunately it may result in some false
positive warnings, but the alternative is more situations where we can
crash without getting messages out.
Fixes: de6e5d3841 ("powerpc: smp_send_stop do not offline stopped CPUs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623041245.865134-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7c6986ade69e3c81bac831645bc72109cd798a80 upstream.
In raise_backtrace_ipi() we iterate through the cpumask of CPUs, sending
each an IPI asking them to do a backtrace, but we don't wait for the
backtrace to happen.
We then iterate through the CPU mask again, and if any CPU hasn't done
the backtrace and cleared itself from the mask, we print a trace on its
behalf, noting that the trace may be "stale".
This works well enough when a CPU is not responding, because in that
case it doesn't receive the IPI and the sending CPU is left to print the
trace. But when all CPUs are responding we are left with a race between
the sending and receiving CPUs, if the sending CPU wins the race then it
will erroneously print a trace.
This leads to spurious "stale" traces from the sending CPU, which can
then be interleaved messily with the receiving CPU, note the CPU
numbers, eg:
[ 1658.929157][ C7] rcu: Stack dump where RCU GP kthread last ran:
[ 1658.929223][ C7] Sending NMI from CPU 7 to CPUs 1:
[ 1658.929303][ C1] NMI backtrace for cpu 1
[ 1658.929303][ C7] CPU 1 didn't respond to backtrace IPI, inspecting paca.
[ 1658.929362][ C1] CPU: 1 PID: 325 Comm: kworker/1:1H Tainted: G W E 5.13.0-rc2+ #46
[ 1658.929405][ C7] irq_soft_mask: 0x01 in_mce: 0 in_nmi: 0 current: 325 (kworker/1:1H)
[ 1658.929465][ C1] Workqueue: events_highpri test_work_fn [test_lockup]
[ 1658.929549][ C7] Back trace of paca->saved_r1 (0xc0000000057fb400) (possibly stale):
[ 1658.929592][ C1] NIP: c00000000002cf50 LR: c008000000820178 CTR: c00000000002cfa0
To fix it, change the logic so that the sending CPU waits 5s for the
receiving CPU to print its trace. If the receiving CPU prints its trace
successfully then the sending CPU just continues, avoiding any spurious
"stale" trace.
This has the added benefit of allowing all CPUs to print their traces in
order and avoids any interleaving of their output.
Fixes: 5cc05910f2 ("powerpc/64s: Wire up arch_trigger_cpumask_backtrace()")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210625140408.3351173-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc7130bf119add37f36238343a593b71ef6ecc1e ]
The IOMMU table is divided into pools for concurrent mappings and each
pool has a separate spinlock. When taking the ownership of an IOMMU group
to pass through a device to a VM, we lock these spinlocks which triggers
a false negative warning in lockdep (below).
This fixes it by annotating the large pool's spinlock as a nest lock
which makes lockdep not complaining when locking nested locks if
the nest lock is locked already.
===
WARNING: possible recursive locking detected
5.11.0-le_syzkaller_a+fstn1 #100 Not tainted
--------------------------------------------
qemu-system-ppc/4129 is trying to acquire lock:
c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
but task is already holding lock:
c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(p->lock)/1);
lock(&(p->lock)/1);
===
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301063653.51003-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ef1dd9c7ed27b080445e1576e8a05957e0e4dfc ]
If identical_pvr_fixup() is not inlined, there are two modpost warnings:
WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:of_get_flat_dt_prop()
The function identical_pvr_fixup() references
the function __init of_get_flat_dt_prop().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.
WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:identify_cpu()
The function identical_pvr_fixup() references
the function __init identify_cpu().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of identify_cpu is wrong.
identical_pvr_fixup() calls two functions marked as __init and is only
called by a function marked as __init so it should be marked as __init
as well. At the same time, remove the inline keywork as it is not
necessary to inline this function. The compiler is still free to do so
if it feels it is worthwhile since commit 889b3c1245de ("compiler:
remove CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 14b3d926a2 ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1316
Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5ae5bc12d0728db60a0aa9b62160ffc038875f1a upstream.
During the EEH MMIO error checking, the current implementation fails to map
the (virtual) MMIO address back to the pci device on radix with hugepage
mappings for I/O. This results into failure to dispatch EEH event with no
recovery even when EEH capability has been enabled on the device.
eeh_check_failure(token) # token = virtual MMIO address
addr = eeh_token_to_phys(token);
edev = eeh_addr_cache_get_dev(addr);
if (!edev)
return 0;
eeh_dev_check_failure(edev); <= Dispatch the EEH event
In case of hugepage mappings, eeh_token_to_phys() has a bug in virt -> phys
translation that results in wrong physical address, which is then passed to
eeh_addr_cache_get_dev() to match it against cached pci I/O address ranges
to get to a PCI device. Hence, it fails to find a match and the EEH event
never gets dispatched leaving the device in failed state.
The commit 33439620680be ("powerpc/eeh: Handle hugepages in ioremap space")
introduced following logic to translate virt to phys for hugepage mappings:
eeh_token_to_phys():
+ pa = pte_pfn(*ptep);
+
+ /* On radix we can do hugepage mappings for io, so handle that */
+ if (hugepage_shift) {
+ pa <<= hugepage_shift; <= This is wrong
+ pa |= token & ((1ul << hugepage_shift) - 1);
+ }
This patch fixes the virt -> phys translation in eeh_token_to_phys()
function.
$ cat /sys/kernel/debug/powerpc/eeh_address_cache
mem addr range [0x0000040080000000-0x00000400807fffff]: 0030:01:00.1
mem addr range [0x0000040080800000-0x0000040080ffffff]: 0030:01:00.1
mem addr range [0x0000040081000000-0x00000400817fffff]: 0030:01:00.0
mem addr range [0x0000040081800000-0x0000040081ffffff]: 0030:01:00.0
mem addr range [0x0000040082000000-0x000004008207ffff]: 0030:01:00.1
mem addr range [0x0000040082080000-0x00000400820fffff]: 0030:01:00.0
mem addr range [0x0000040082100000-0x000004008210ffff]: 0030:01:00.1
mem addr range [0x0000040082110000-0x000004008211ffff]: 0030:01:00.0
Above is the list of cached io address ranges of pci 0030:01:00.<fn>.
Before this patch:
Tracing 'arg1' of function eeh_addr_cache_get_dev() during error injection
clearly shows that 'addr=' contains wrong physical address:
kworker/u16:0-7 [001] .... 108.883775: eeh_addr_cache_get_dev:
(eeh_addr_cache_get_dev+0xc/0xf0) addr=0x80103000a510
dmesg shows no EEH recovery messages:
[ 108.563768] bnx2x: [bnx2x_timer:5801(eth2)]MFW seems hanged: drv_pulse (0x9ae) != mcp_pulse (0x7fff)
[ 108.563788] bnx2x: [bnx2x_hw_stats_update:870(eth2)]NIG timer max (4294967295)
[ 108.883788] bnx2x: [bnx2x_acquire_hw_lock:2013(eth1)]lock_status 0xffffffff resource_bit 0x1
[ 108.884407] bnx2x 0030:01:00.0 eth1: MDC/MDIO access timeout
[ 108.884976] bnx2x 0030:01:00.0 eth1: MDC/MDIO access timeout
<..>
After this patch:
eeh_addr_cache_get_dev() trace shows correct physical address:
<idle>-0 [001] ..s. 1043.123828: eeh_addr_cache_get_dev:
(eeh_addr_cache_get_dev+0xc/0xf0) addr=0x40080bc7cd8
dmesg logs shows EEH recovery getting triggerred:
[ 964.323980] bnx2x: [bnx2x_timer:5801(eth2)]MFW seems hanged: drv_pulse (0x746f) != mcp_pulse (0x7fff)
[ 964.323991] EEH: Recovering PHB#30-PE#10000
[ 964.324002] EEH: PE location: N/A, PHB location: N/A
[ 964.324006] EEH: Frozen PHB#30-PE#10000 detected
<..>
Fixes: 33439620680b ("powerpc/eeh: Handle hugepages in ioremap space")
Cc: stable@vger.kernel.org # v5.3+
Reported-by: Dominic DeMarco <ddemarc@us.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161821396263.48361.2796709239866588652.stgit@jupiter
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Thomas Gleixner <tglx@linutronix.de>
commit 6553896666433e7efec589838b400a2a652b3ffa upstream.
Some code pathes, especially the low level entry code, must be protected
against instrumentation for various reasons:
- Low level entry code can be a fragile beast, especially on x86.
- With NO_HZ_FULL RCU state needs to be established before using it.
Having a dedicated section for such code allows to validate with tooling
that no unsafe functions are invoked.
Add the .noinstr.text section and the noinstr attribute to mark
functions. noinstr implies notrace. Kprobes will gain a section check
later.
Provide also a set of markers: instrumentation_begin()/end()
These are used to mark code inside a noinstr function which calls
into regular instrumentable text section as safe.
The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is
enabled as the end marker emits a NOP to prevent the compiler from merging
the annotation points. This means the objtool verification requires a
kernel compiled with this option.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134100.075416272@linutronix.de
[Nicolas:
Guard noinstr macro in include/linux/compiler_types.h in __KERNEL__
&& !__ASSEMBLY__, otherwise noinstr is expanded in the linker
script construct.
Upstream does not have this problem as many macros were moved by
commit 71391bdd2e9a ("include/linux/compiler_types.h: don't pollute
userspace with macro definitions"). We take the minimal approach here
and just guard the new macro.
Minor context conflicts in:
arch/powerpc/kernel/vmlinux.lds.S
include/asm-generic/vmlinux.lds.h
include/linux/compiler.h]
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 11cb0a25f71818ca7ab4856548ecfd83c169aa4d ]
If an unrecoverable system reset hits in process context, the system
does not have to panic. Similar to machine check, call nmi_exit()
before die().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-26-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5537fcb319d016ce387f818dd774179bc03217f5 ]
On many powerpc platforms the discovery and initalisation of
pci_controllers (PHBs) happens inside of setup_arch(). This is very early
in boot (pre-initcalls) and means that we're initialising the PHB long
before many basic kernel services (slab allocator, debugfs, a real ioremap)
are available.
On PowerNV this causes an additional problem since we map the PHB registers
with ioremap(). As of commit d538aadc2718 ("powerpc/ioremap: warn on early
use of ioremap()") a warning is printed because we're using the "incorrect"
API to setup and MMIO mapping in searly boot. The kernel does provide
early_ioremap(), but that is not intended to create long-lived MMIO
mappings and a seperate warning is printed by generic code if
early_ioremap() mappings are "leaked."
This is all fixable with dumb hacks like using early_ioremap() to setup
the initial mapping then replacing it with a real ioremap later on in
boot, but it does raise the question: Why the hell are we setting up the
PHB's this early in boot?
The old and wise claim it's due to "hysterical rasins." Aside from amused
grapes there doesn't appear to be any real reason to maintain the current
behaviour. Already most of the newer embedded platforms perform PHB
discovery in an arch_initcall and between the end of setup_arch() and the
start of initcalls none of the generic kernel code does anything PCI
related. On powerpc scanning PHBs occurs in a subsys_initcall so it should
be possible to move the PHB discovery to a core, postcore or arch initcall.
This patch adds the ppc_md.discover_phbs hook and a core_initcall stub that
calls it. The core_initcalls are the earliest to be called so this will
any possibly issues with dependency between initcalls. This isn't just an
academic issue either since on pseries and PowerNV EEH init occurs in an
arch_initcall and depends on the pci_controllers being available, similarly
the creation of pci_dns occurs at core_initcall_sync (i.e. between core and
postcore initcalls). These problems need to be addressed seperately.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Make discover_phbs() static]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201103043523.916109-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 903178d0ce6bb30ef80a3604ab9ee2b57869fbc9 ]
For unimplemented instructions or unimplemented SPRs, the 8xx triggers
a "Software Emulation Exception" (0x1000). That interrupt doesn't set
reason bits in SRR1 as the "Program Check Exception" does.
Go through emulation_assist_interrupt() to set REASON_ILLEGAL.
Fixes: fbbcc3bb13 ("powerpc/8xx: Remove SoftwareEmulation()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ad782af87a222efc79cfb06079b0fd23d4224eaf.1612515180.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f10881a46f8914428110d110140a455c66bdf27b upstream.
Commit bd59380c5ba4 ("powerpc/rtas: Restrict RTAS requests from userspace")
introduced the following error when invoking the errinjct userspace
tool:
[root@ltcalpine2-lp5 librtas]# errinjct open
[327884.071171] sys_rtas: RTAS call blocked - exploit attempt?
[327884.071186] sys_rtas: token=0x26, nargs=0 (called by errinjct)
errinjct: Could not open RTAS error injection facility
errinjct: librtas: open: Unexpected I/O error
The entry for ibm,open-errinjct in rtas_filter array has a typo where
the "j" is omitted in the rtas call name. After fixing this typo the
errinjct tool functions again as expected.
[root@ltcalpine2-lp5 linux]# errinjct open
RTAS error injection facility open, token = 1
Fixes: bd59380c5ba4 ("powerpc/rtas: Restrict RTAS requests from userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201208195434.8289-1-tyreld@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3c0b976bf20d236c57adcefa80f86a0a1d737727 ]
Currently in generic_secondary_smp_init(), cur_cpu_spec->cpu_restore()
is called before a stack has been set up in r1. This was previously fine
as the cpu_restore() functions were implemented in assembly and did not
use a stack. However commit 5a61ef74f2 ("powerpc/64s: Support new
device tree binding for discovering CPU features") used
__restore_cpu_cpufeatures() as the cpu_restore() function for a
device-tree features based cputable entry. This is a C function and
hence uses a stack in r1.
generic_secondary_smp_init() is entered on the secondary cpus via the
primary cpu using the OPAL call opal_start_cpu(). In OPAL, each hardware
thread has its own stack. The OPAL call is ran in the primary's hardware
thread. During the call, a job is scheduled on a secondary cpu that will
start executing at the address of generic_secondary_smp_init(). Hence
the value that will be left in r1 when the secondary cpu enters the
kernel is part of that secondary cpu's individual OPAL stack. This means
that __restore_cpu_cpufeatures() will write to that OPAL stack. This is
not horribly bad as each hardware thread has its own stack and the call
that enters the kernel from OPAL never returns, but it is still wrong
and should be corrected.
Create the temp kernel stack before calling cpu_restore().
As noted by mpe, for a kexec boot, the secondary CPUs are released from
the spin loop at address 0x60 by smp_release_cpus() and then jump to
generic_secondary_smp_init(). The call to smp_release_cpus() is in
setup_arch(), and it comes before the call to emergency_stack_init().
emergency_stack_init() allocates an emergency stack in the PACA for each
CPU. This address in the PACA is what is used to set up the temp kernel
stack in generic_secondary_smp_init(). Move releasing the secondary CPUs
to after the PACAs have been allocated an emergency stack, otherwise the
PACA stack pointer will contain garbage and hence the temp kernel stack
created from it will be broken.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201014072837.24539-1-jniethe5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 29daf869cbab69088fe1755d9dd224e99ba78b56 upstream.
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
This adds at least 3 instructions to the TLB miss exception
handlers fast path. Following patch will reduce this overhead.
Also update the rotation instruction to the correct number of bits
to reflect all changes done to _PAGE_ACCESSED over time.
Fixes: d069cb4373 ("powerpc/8xx: Don't touch ACCESSED when no SWAP.")
Fixes: 5f356497c3 ("powerpc/8xx: remove unused _PAGE_WRITETHRU")
Fixes: e0a8e0d90a ("powerpc/8xx: Handle PAGE_USER via APG bits")
Fixes: 5b2753fc3e ("powerpc/8xx: Implementation of PAGE_EXEC")
Fixes: a891c43b97d3 ("powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/af834e8a0f1fa97bfae65664950f0984a70c4750.1602492856.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a32a7e78bd0cd9a9b6332cbdc345ee5ffd0c5de upstream.
IBM Power9 processors can speculatively operate on data in the L1 cache before
it has been completely validated, via a way-prediction mechanism. It is not possible
for an attacker to determine the contents of impermissible memory using this method,
since these systems implement a combination of hardware and software security measures
to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that the
attacker controls. This can be used for example to speculatively bypass "kernel
user access prevention" techniques, as discovered by Anthony Steinhauser of
Google's Safeside Project. This is not an attack by itself, but there is a possibility
it could be used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege boundaries
of concern. This patch flushes the L1 cache after user accesses.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f79643787e0a0762d2409b7b8334e83f22d85695 upstream.
IBM Power9 processors can speculatively operate on data in the L1 cache before
it has been completely validated, via a way-prediction mechanism. It is not possible
for an attacker to determine the contents of impermissible memory using this method,
since these systems implement a combination of hardware and software security measures
to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that the
attacker controls. This can be used for example to speculatively bypass "kernel
user access prevention" techniques, as discovered by Anthony Steinhauser of
Google's Safeside Project. This is not an attack by itself, but there is a possibility
it could be used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege boundaries
of concern. This patch flushes the L1 cache on kernel entry.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>