Commit graph

460 commits

Author SHA1 Message Date
Qinglin Ye
cec28a5428 USB: usb-storage: unusual_devs entry for Kingston DT 101 G2
Kingston DT 101 G2 replies a wrong tag while transporting, add an
unusal_devs entry to ignore the tag validation.

Signed-off-by: Qinglin Ye <yestyle@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 19:56:47 -08:00
Felipe Balbi
bc985c10f3 USB: storage: ene_ub6250: fix compile warnings
Fix the following compile warning:

| drivers/usb/storage/ene_ub6250.c: In function ‘ms_scsi_write’:
| drivers/usb/storage/ene_ub6250.c:1728:6: warning: ‘result’ may \
|	be used uninitialized in this function [-Wuninitialized]
| drivers/usb/storage/ene_ub6250.c:1795:77: warning: ‘offset’ may \
|	be used uninitialized in this function [-Wuninitialized]

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15 10:06:16 -08:00
Alan Stern
2f640bf4c9 usb-storage: Accept 8020i-protocol commands longer than 12 bytes
The 8020i protocol (also 8070i and QIC-157) uses 12-byte commands;
shorter commands must be padded.  Simon Detheridge reports that his
3-TB USB disk drive claims to use the 8020i protocol (which is
normally meant for ATAPI devices like CD drives), and because of its
large size, the disk drive requires the use of 16-byte commands.
However the usb_stor_pad12_command() routine in usb-storage always
sets the command length to 12, making the drive impossible to use.

Since the SFF-8020i specification allows for 16-byte commands in
future extensions, we may as well accept them.  This patch (as1490)
changes usb_stor_pad12_command() to leave commands larger than 12
bytes alone rather than truncating them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Simon Detheridge <simon@widgit.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14 17:05:03 -08:00
Paul Gortmaker
f940fcd8ea usb: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed
With module.h being implicitly everywhere via device.h, the absence
of explicitly including something for EXPORT_SYMBOL went unnoticed.
Since we are heading to fix things up and clean module.h from the
device.h file, we need to explicitly include these files now.

Use the lightweight version of the header that has just THIS_MODULE
and EXPORT_SYMBOL variants.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:25 -04:00
Paul Gortmaker
6eb0de8270 usb: Add module.h to drivers/usb consumers who really use it.
The situation up to this point meant that module.h was pretty
much everywhere, regardless of whether you asked for it or not.
We are fixing that, so give the USB folks who want it an actual
include of it.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:25 -04:00
Linus Torvalds
1be025d3cb Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits)
  usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push()
  usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB.
  USB: gadget: midi: memory leak in f_midi_bind_config()
  USB: gadget: midi: fix range check in f_midi_out_open()
  QE/FHCI: fixed the CONTROL bug
  usb: renesas_usbhs: tidyup for smatch warnings
  USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms
  EHCI: workaround for MosChip controller bug
  usb: gadget: file_storage: fix race on unloading
  USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers
  USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio
  usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF .
  USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board
  USB: Fix runtime wakeup on OHCI
  xHCI/USB: Make xHCI driver have a BOS descriptor.
  usb: gadget: add new usb gadget for ACM and mass storage
  ...
2011-10-25 12:23:15 +02:00
edwin_rong
45e1892e70 USB: Realtek cr: Fix driver freeze issue
After auto-delink command is triggered, the CSW won't be sent back
to host side, in which scenario, the USB Mass Storage driver will
wait for the completion of the URB for MAX_SCHEDULE_TIMEOUT.

Signed-off-by: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-18 01:51:34 -07:00
Vincent Palatin
839f245f8f usb-storage: fix realtek cr configuration
A typo in the configuration variable name prevents from activating the
USB autosuspend on the device.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-18 01:33:07 -07:00
Jiri Kosina
e060c38434 Merge branch 'master' into for-next
Fast-forward merge with Linus to be able to merge patches
based on more recent version of the tree.
2011-09-15 15:08:18 +02:00
Jesper Juhl
255f5e062b Remove unneeded version.h includes (and add where needed) for drivers/usb/
It was pointed out by 'make versioncheck' that linux/version.h was not
always being included where needed and sometimes included needlessly
in drivers/usb/.
This patch fixes up the includes.

For the UVC gadget driver bits, this was ACK'ed by Laurent Pinchart.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-15 14:57:07 +02:00
Luben Tuikov
e16da02fcd USB: storage: Use normalized sense when emulating autosense
This patch solves two things:
1) Enables autosense emulation code to correctly
interpret descriptor format sense data, and
2) Fixes a bug whereby the autosense emulation
code would overwrite descriptor format sense data
with SENSE KEY HARDWARE ERROR in fixed format, to
incorrectly look like this:

Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc]  Sense Key : Recovered Error [current] [descriptor]
Oct 21 14:11:07 localhost kernel: Descriptor sense data with sense descriptors (in hex):
Oct 21 14:11:07 localhost kernel:        72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
Oct 21 14:11:07 localhost kernel:        00 4f 00 c2 00 50
Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc]  ASC=0x4 ASCQ=0x1d

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 15:55:03 -07:00
Adam Cozzette
065e60964e ums_realtek: do not use stack memory for DMA
This patch changes rts51x_read_mem, rts51x_write_mem, and rts51x_read_status to
allocate temporary buffers with kmalloc. This way stack addresses are not used
for DMA when these functions call rts51x_bulk_transport.

Signed-off-by: Adam Cozzette <acozzette@cs.hmc.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-24 15:06:54 -07:00
Seth Forshee
f02fe890ec usb_storage: Don't freeze in usb-stor-scan
Scanning cannot be run during suspend or hibernation, but if
usb-stor-scan freezes another thread waiting on scanning to
complete may fail to freeze.

However, if usb-stor-scan is left freezable without ever actually
freezing then the freezer will wait on it to exit, and threads
waiting for scanning to finish will no longer be blocked. One
problem with this approach is that usb-stor-scan has a delay to
wait for devices to settle (which is currently the only point where
it can freeze). To work around this we can request that the freezer
send a fake signal when freezing, then use interruptible sleep to
wake the thread early when freezing happens.

To make this happen, the following changes are made to
usb-stor-scan:

 * Use set_freezable_with_signal() instead of set_freezable() to
   request a fake signal when freezing

 * Use wait_event_interruptible_timeout() instead of
   wait_event_freezable_timeout() to avoid freezing

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22 15:21:15 -07:00
Nick Bowler
a871e4f551 USB: usb-storage: unusual_devs entry for ARM V2M motherboard.
Connecting the V2M to a Linux host results in a constant stream of
errors spammed to the console, all of the form

  sd 1:0:0:0: ioctl_internal_command return code = 8070000
     : Sense Key : 0x4 [current]
     : ASC=0x0 ASCQ=0x0

The errors appear to be otherwise harmless.  Add an unusual_devs entry
which eliminates all of the error messages.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08 12:34:46 -07:00
Linus Torvalds
1380516599 Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits)
  staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register.
  staging:iio:kfifo_buf fix double initialization of the ring device structure.
  staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata.
  staging:iio:imu fix missing register table index for some channels
  spectra: enable device before poking it
  staging: rts_pstor: Fix a miswriting
  staging/lirc_bt829: Return -ENODEV when no hardware is found.
  staging/lirc_parallel: remove pointless prototypes.
  staging/lirc_parallel: fix panic on rmmod
  staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata.
  Staging: zram: Fix kunmapping order
  Revert "gma500: Fix dependencies"
  gma500: Add medfield header
  gma500: wire up the mrst i2c bus from chip_info
  gma500: Fix DPU build
  gma500: Clean up the DPU config and make it runtime
  gma500: resync with Medfield progress
  gma500: Use the mrst helpers and power control for mode commit
  gma500@ Fix backlight range error
  gma500: More Moorestown muddle meddling means MM maybe might modeset
  ...

Fix up fairly trivial conflicts all over, mostly due to header file
cleanup conflicts, but some deleted files and some just context changes:
 - Documentation/feature-removal-schedule.txt
 - drivers/staging/bcm/headers.h
 - drivers/staging/brcm80211/brcmfmac/dhd_linux.c
 - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
 - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
 - drivers/staging/brcm80211/brcmfmac/wl_iw.c
 - drivers/staging/et131x/et131x_netdev.c
 - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
 - drivers/staging/rtl8192e/r8192E.h
 - drivers/staging/usbip/userspace/src/utils.h
2011-07-25 23:26:34 -07:00
Cho, Yu-Chen
33842cedfc Staging: Merge ENE UB6250 MS card codes from keucr to drivers/usb/storage/ene_ub6250.c
Merge ENE UB6250 MS card codes from keucr to drivers/usb/storage/ene_ub6250.c.

Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-08 14:12:52 -07:00
edwin_rong
e931830bb8 Realtek cr: Add autosuspend function.
The autosuspend function can be disabled by unchecking the Macro
CONFIG_REALTEK_AUTOPM in kernel config file, by default, this macro is
turned on.

Signed-off-by: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:53:42 -07:00
edwin_rong
b6507df482 Realtek cr: Remove unused Macros
Remove Macros wait_timeout() and wait_timeout_x().

Signed-off-by: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:53:41 -07:00
edwin_rong
151d9fad6e Realtek cr: clean up unnecessary whitespaces.
Signed-off-by: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:53:41 -07:00
Alan Stern
21c13a4f7b usb-storage: redo incorrect reads
Some USB mass-storage devices have bugs that cause them not to handle
the first READ(10) command they receive correctly.  The Corsair
Padlock v2 returns completely bogus data for its first read (possibly
it returns the data in encrypted form even though the device is
supposed to be unlocked).  The Feiya SD/SDHC card reader fails to
complete the first READ(10) command after it is plugged in or after a
new card is inserted, returning a status code that indicates it thinks
the command was invalid, which prevents the kernel from retrying the
read.

Since the first read of a new device or a new medium is for the
partition sector, the kernel is unable to retrieve the device's
partition table.  Users have to manually issue an "hdparm -z" or
"blockdev --rereadpt" command before they can access the device.

This patch (as1470) works around the problem.  It adds a new quirk
flag, US_FL_INVALID_READ10, indicating that the first READ(10) should
always be retried immediately, as should any failing READ(10) commands
(provided the preceding READ(10) command succeeded, to avoid getting
stuck in a loop).  The patch also adds appropriate unusual_devs
entries containing the new flag.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Sven Geggus <sven-usbst@geggus.net>
Tested-by: Paul Hartman <paul.hartman+linux@gmail.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
CC: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:05:42 -07:00
Linus Torvalds
c44dead70a Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits)
  USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h
  USB: UHCI: Support big endian GRUSBHC HC
  sparc: add {read,write}*_be routines
  USB: UHCI: Add support for big endian descriptors
  USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier
  USB: UHCI: Add support for big endian mmio
  usb-storage: Correct adjust_quirks to include latest flags
  usb/isp1760: Fix possible unlink problems
  usb/isp1760: Move function isp1760_endpoint_disable() within file.
  USB: remove remaining usages of hcd->state from usbcore and fix regression
  usb: musb: ux500: add configuration and build options for ux500 dma
  usb: musb: ux500: add dma glue layer for ux500
  usb: musb: ux500: add dma name for ux500
  usb: musb: ux500: add ux500 specific code for gadget side
  usb: musb: fix compile error
  usb-storage: fix up the unusual_realtek device list
  USB: gadget: f_audio: Fix invalid dereference of initdata
  EHCI: don't rescan interrupt QHs needlessly
  OHCI: fix regression caused by nVidia shutdown workaround
  USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage
  ...
2011-05-23 12:33:02 -07:00
Linus Torvalds
57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
Karl Relton
5116901d85 usb-storage: Correct adjust_quirks to include latest flags
Commits ae38c78a03
and 00914025cc added quirk flags
US_FL_NO_READ_DISC_INFO and US_FL_NO_READ_CAPACITY_16 to
the usb-storage driver. However they did not add the corresponding flags
to adjust_quirks() in usb.c, so there was no facility for a user
to over-ride/add them via the quirks module parameter.

Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-19 16:34:05 -07:00
Alan Stern
a8e62dd6d9 usb-storage: fix up the unusual_realtek device list
This patch (as1461) fixes the unusual_devs entries for the Realtek USB
card reader.  They should be ordered by PID, and they should not
override the Subclass and Protocol values provided by the device.
Otherwise a notification about unnecessary entries gets printed in the
kernel log during probing.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-By: Tony Vroon <tony@linx.net>
CC: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-17 11:56:28 -07:00
Christoph Hellwig
05d1091fd9 [SCSI] usb-storage: do not increment cmd->serial_number
The isd200 sub-driver increments the command serial number despite not
using it at all in it's routine for sending internal scsi commands.
Remove the increment to prepare for removing the serial_number field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-01 10:23:09 -05:00
Joe Perches
85ee7a1d39 treewide: cleanup continuations and remove logging message whitespace
Using C line continuation inside format strings is error prone.
Clean up the unintended whitespace introduced by misuse of \.
Neaten correctly used line continations as well for consistency.

drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well,
but arcmsr needs a lot more work and the driver should likely be
moved to staging instead.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-26 10:24:37 +02:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds
6445ced867 Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (961 commits)
  staging: hv: fix memory leaks
  staging: hv: Remove NULL check before kfree
  Staging: hv: Get rid of vmbus_child_dev_add()
  Staging: hv: Change the signature for vmbus_child_device_register()
  Staging: hv: Get rid of vmbus_cleanup() function
  Staging: hv: Get rid of vmbus_dev_rm() function
  Staging: hv: Change the signature for vmbus_on_isr()
  Staging: hv: Eliminate vmbus_event_dpc()
  Staging: hv: Get rid of the function vmbus_msg_dpc()
  Staging: hv: Change the signature for vmbus_cleanup()
  Staging: hv: Simplify root device management
  staging: rtl8192e: Don't copy dev pointer to skb
  staging: rtl8192e: Pass priv to cmdpkt functions
  staging: rtl8192e: Pass priv to firmware download functions
  staging: rtl8192e: Pass priv to rtl8192_interrupt
  staging: rtl8192e: Pass rtl8192_priv to dm functions
  staging: rtl8192e: Pass ieee80211_device to callbacks
  staging: rtl8192e: Pass ieee80211_device to callbacks
  staging: rtl8192e: Pass ieee80211_device to callbacks
  staging: rtl8192e: Pass ieee80211_device to callbacks
  ...
2011-03-16 15:19:35 -07:00
Randy Dunlap
e49c459c33 usb-storage: fix menu ordering
Move the USB_STORAGE_ENE_UB6250 entry so that it stays under the
USB_STORAGE menu.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-11 14:26:09 -08:00
Randy Dunlap
0074f59b51 usb-storage: ene_ub6250 depends on USB_STORAGE
Fix ene_ub6250 build: it uses usb_storage driver interfaces, so it
should depend on USB_STORAGE.

ene_ub6250.c:(.text+0x14ff19): undefined reference to `usb_stor_reset_resume'
ene_ub6250.c:(.text+0x14ffb1): undefined reference to `usb_stor_bulk_transfer_buf'
ene_ub6250.c:(.text+0x14ffdd): undefined reference to `usb_stor_bulk_srb'
ene_ub6250.c:(.text+0x14fff1): undefined reference to `usb_stor_bulk_transfer_sg'
ene_ub6250.c:(.text+0x1503dd): undefined reference to `usb_stor_set_xfer_buf'
ene_ub6250.c:(.text+0x15048e): undefined reference to `usb_stor_access_xfer_buf'
ene_ub6250.c:(.text+0x150723): undefined reference to `usb_stor_probe1'
ene_ub6250.c:(.text+0x150795): undefined reference to `usb_stor_probe2'
ene_ub6250.c:(.text+0x1507af): undefined reference to `usb_stor_disconnect'
drivers/built-in.o:(.data+0x10224): undefined reference to `usb_stor_suspend'
drivers/built-in.o:(.data+0x10230): undefined reference to `usb_stor_pre_reset'
drivers/built-in.o:(.data+0x10234): undefined reference to `usb_stor_post_reset'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-11 14:26:08 -08:00
Dan Carpenter
8b0fb6f872 USB: ene_ub6250: fix memory leak in ene_load_bincode()
"buf" gets allocated twice in a row.  It's the second allocation which
is correct.  The first one should be removed.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: huajun li <huajun.li.lee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-11 14:26:08 -08:00
huajun li
41e568d14e Staging: Merge ENE UB6250 SD card codes from keucr to drivers/usb/storage
The usb portion of this driver can now go into drivers/usb/storage.
This leaves the non-usb portion of the code still in staging.

Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 13:40:59 -08:00
Huzaifa Sidhpurwala
5af9a6eb37 USB: Remove delay_t unused variable from sierra_ms.c driver initialisation code
trivial patch to remove unused delay_t varible

Signed-off-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-02 19:52:29 -05:00
wwang
8a9e658ad3 usb_storage: realtek_cr patch: add const modifier
Add const modifier before global variable realtek_cr_ids.

Signed-off-by: wwang <wei_wang@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 10:53:26 -08:00
wwang
9812f748a1 usb_storage: realtek_cr patch: fix sparse warning
Fix some sparse warning for realtek_cr patch

Signed-off-by: wwang <wei_wang@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 10:53:26 -08:00
Greg Kroah-Hartman
66b0835e2b Merge 2.6.38-rc5 into usb-next
This is needed to resolve some merge conflicts that were found
in the USB host controller patches, and reported by Stephen Rothwell.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 09:56:55 -08:00
Alan Stern
3ea3c9b5a8 USB: usb-storage: unusual_devs entry for Coby MP3 player
This patch (as1444) adds an unusual_devs entry for an MP3 player from
Coby electronics.  The device has two nasty bugs.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Jasper Mackenzie <scarletpimpernal@hotmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 16:51:05 -08:00
Nick Holloway
c25f6b1591 USB: Storage: Add unusual_devs entry for VTech Kidizoom
This device suffers from the off-by-one error when reporting the capacity,
so add entry with US_FL_FIX_CAPACITY.

Signed-off-by: Nick Holloway <Nick.Holloway@pyrites.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 16:42:49 -08:00
wwang
50a6cb932d USB: usb_storage: add ums-realtek driver
ums_realtek is used to support the power-saving function
for Realtek RTS51xx USB card readers.

Signed-off-by: wwang <wei_wang@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22 19:40:10 -08:00
Alan Stern
12f68c480c USB: usb-storage: unusual_devs entry for CamSport Evo
This patch (as1438) adds an unusual_devs entry for the MagicPixel
FW_Omega2 chip, used in the CamSport Evo camera.  The firmware
incorrectly reports a vendor-specific bDeviceClass.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: <ttkspam@free.fr>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22 18:32:17 -08:00
Richard Schütz
7e1e7bd9db USB: usb-storage: unusual_devs update for TrekStor DataStation maxi g.u external hard drive enclosure
The TrekStor DataStation maxi g.u external hard drive enclosure uses a
JMicron USB to SATA chip which needs the US_FL_IGNORE_RESIDUE flag to work
properly.

Signed-off-by: Richard Schütz <r.schtz@t-online.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22 18:31:44 -08:00
Richard Schütz
cae41118f5 USB: usb-storage: unusual_devs update for Cypress ATACB
New device ID added for unusual Cypress ATACB device.

Signed-off-by: Richard Schütz <r.schtz@t-online.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22 18:31:26 -08:00
Greg Kroah-Hartman
2af10844eb USB: Merge 2.6.37-rc5 into usb-next
This is to resolve the conflict in the file,
drivers/usb/gadget/composite.c that was due to a revert in Linus's tree
needed for the 2.6.37 release.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22 12:25:34 -08:00
Vitaly Kuznetsov
d73a9b3001 USB: usb-storage: unusual_devs entry for the Samsung YP-CP3
Add an unusual_devs entry for the Samsung YP-CP3 MP4 player.

User was getting the following errors in dmesg:
 usb 2-6: reset high speed USB device using ehci_hcd and address 2
 usb 2-6: reset high speed USB device using ehci_hcd and address 2
 usb 2-6: reset high speed USB device using ehci_hcd and address 2
 usb 2-6: USB disconnect, address 2
 sd 3:0:0:0: [sdb] Assuming drive cache: write through
 sdb:<2>ldm_validate_partition_table(): Disk read failed.
 Dev sdb: unable to read RDB block 0
  unable to read partition table

Signed-off-by: Vitaly Kuznetsov <vitty@altlinux.ru>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
CC: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16 15:45:45 -08:00
Greg Kroah-Hartman
36facadd9e Merge branch 'usb-next' into musb-merge
* usb-next: (132 commits)
  USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path
  USB: uas: Ensure we only bind to a UAS interface
  USB: uas: Rename sense pipe and sense urb to status pipe and status urb
  USB: uas: Use kzalloc instead of kmalloc
  USB: uas: Fix up the Sense IU
  usb: musb: core: kill unneeded #include's
  DA8xx: assign name to MUSB IRQ resource
  usb: gadget: g_ncm added
  usb: gadget: f_ncm.c added
  usb: gadget: u_ether: prepare for NCM
  usb: pch_udc: Fix setup transfers with data out
  usb: pch_udc: Fix compile error, warnings and checkpatch warnings
  usb: add ab8500 usb transceiver driver
  USB: gadget: Implement runtime PM for MSM bus glue driver
  USB: gadget: Implement runtime PM for ci13xxx gadget
  USB: gadget: Add USB controller driver for MSM SoC
  USB: gadget: Introduce ci13xxx_udc_driver struct
  USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask
  USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc
  USB: gadget: Separate out PCI bus code from ci13xxx_udc
  ...
2010-12-16 10:05:06 -08:00
Matthew Wilcox
0b83ae960c USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path
If swap is on a UAS device, we could recurse into the driver by using
GFP_KERNEL.  Using GFP_NOIO ensures we won't.

Reported-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15 15:26:44 -08:00
Matthew Wilcox
89dc29051b USB: uas: Ensure we only bind to a UAS interface
While all existing UAS devices use alternate interface 1, this is not
guaranteed, and it has caused confusion with people trying to bind the
uas driver to non-uas devices.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15 15:26:44 -08:00
Matthew Wilcox
92a3f767f5 USB: uas: Rename sense pipe and sense urb to status pipe and status urb
The spec calls this the status pipe.  While it is used to receive sense IUs,
it is also used to receive other IUs, so this can be confusing.

Reported-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15 15:26:44 -08:00
Matthew Wilcox
ac563cfd52 USB: uas: Use kzalloc instead of kmalloc
The IUs are not being fully initialised by the driver (due to the reserved
space).  Since we should be zeroing reserved fields, use kzalloc to do
it for us.

Reported-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15 15:26:44 -08:00
Matthew Wilcox
4400ef311e USB: uas: Fix up the Sense IU
Add a comment to the Sense IU data structure that it's also used for Read
Ready and Write Ready.  Remove the 'service response' element since it's
gone from the current draft (04).

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-15 15:26:43 -08:00