Commit graph

99 commits

Author SHA1 Message Date
Mark Brown
626761ad02 Merge remote-tracking branches 'asoc/topic/jack', 'asoc/topic/jz4740' and 'asoc/topic/kirkwood' into asoc-next 2015-04-12 19:49:03 +01:00
Fabian Frederick
7f2c52afc0 ASoC: kirkwood: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-22 18:03:28 +00:00
Shawn Guo
aaa6d06282 ASoC: kirkwood: fix struct clk pointer comparing
Since commit 035a61c314 ("clk: Make clk API return per-user struct clk
instances"), clk API users can no longer check if two struct clk
pointers are pointing to the same hardware clock, i.e. struct clk_hw, by
simply comparing two pointers.  That's because with the per-user clk
change, a brand new struct clk is created whenever clients try to look
up the clock by calling clk_get() or sister functions like clk_get_sys()
and of_clk_get().  This changes the original behavior where the struct
clk is only created for once when clock driver registers the clock to
CCF in the first place.  The net change here is before commit
035a61c314 the struct clk pointer is unique for given hardware
clock, while after the commit the pointers returned by clk lookup calls
become different for the same hardware clock.

That said, the struct clk pointer comparing in the code doesn't work any
more.  Call helper function clk_is_match() instead to fix the problem.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-11 16:00:41 -07:00
Wolfram Sang
b4c1456f86 ASoC: kirkwood: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:22:10 +02:00
Andrew Lunn
6145dfc6d9 ASoC: kirkwood: Remove ARCH_KIRKWOOD dependency
mach-kirkwood has been removed, now that kirkwood lives in
mach-mvebu. Remove ARCH_KIRKWOOD since ARCH_MVEBU is sufficient.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-29 20:35:23 +01:00
Andrew Lunn
270a85c80c ASoC: kirkwood: Remove unused drivers
Both kirkwood-openrd and kirkwood-t5325 drivers have been replaced
with DT based simple-card equivelents. So remove these drivers.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-29 20:34:37 +01:00
Russell King
920ec4e595 ASoC: kirkwood: implement NO_PERIOD_WAKEUP support
Permit ALSA to run without hardware interrupts from the audio interface.
Instead, ALSA will use a kernel timer to decide when to check the buffer
state, resulting in a lighter workload for the CPU.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28 13:18:46 +01:00
Russell King
a622251c01 ASoC: kirkwood: allow smaller audio periods and smaller number of periods
There is no hardware restriction requiring a minimum of 8 periods, or
a minimum of 2048 bytes in a period.  Let's drop these values so that
userspace has more flexibility in choosing these parameters.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28 13:18:41 +01:00
Russell King
4d2097e517 ASoC: kirkwood-i2s: fix pause handling some more
We still see the occasional timeout waiting for busy to clear.  As the
spec is contradictory, and we know that the current implementation
doesn't work, try an alternative interpretation from the spec.  This
one appears to work - I have yet to find any issue with it during my
testing over several months.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28 13:18:33 +01:00
Russell King
2fbc38219c ASoC: kirkwood-i2s: fix mute handling
The spec requires that the mute bits must be set while the channel
is disabled.  Ensure that this is the case by providing a helper
which ensures that the appropriate mute bit is set while the enable
bit is clear.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28 13:18:28 +01:00
Russell King
6772190632 ASoC: kirkwood-i2s: fix RECCTL masking
Since we wish to disable capture inputs for some formats, we need to
ensure that we clear the enable bits in our cached record control
register.  This seems to have been missed, resulting in the register
only accumulating enable bits.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28 13:18:22 +01:00
Russell King
52b896cfef ASoC: kirkwood-i2s: provide helper KIRKWOOD_RECCTL_ENABLE_MASK definition
Add a KIRKWOOD_RECCTL_ENABLE_MASK definition to complement the existing
PLAYCTL definition, and make use of it where we wish to clear both
enable bits.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-28 13:18:17 +01:00
Jarkko Nikula
d77a14b579 ASoC: Remove needless snd_soc_dapm_enable_pin() from machine driver inits
ALSA SoC core marks widgets as connected by default when they are
initialized in snd_soc_dapm_new_control() so there is no need to call
snd_soc_dapm_enable_pin() from machine driver init functions.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-19 17:19:18 +01:00
Linus Torvalds
cbda94e039 ARM: SoC: driver changes
These changes are mostly for ARM specific device drivers that either
 don't have an upstream maintainer, or that had the maintainer ask
 us to pick up the changes to avoid conflicts. A large chunk of this
 are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from
 that, reset controllers for STi as well as a large rework of the
 Marvell Orion/EBU watchdog driver are notable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/1+GCrR//JCVInAQJmfg/9GyqHatDjjUPUBjUQRIEtKgGdmQwdbDqF
 x+OrS/q5B5zYbpIWkbkt1IUYJfU+89Z5ev9jxI4rV824Nu9Y92mHPDnv+N/ptkIh
 q2OVP3bQDpWs3aEVV2B1HBNcWrNUuwco9BJu05eegEePii/cto0/wKwWIgUmrmjy
 xOLthsnp2YmeplGs7ctC6Dz8XbmELebpawejTGylARXei/SwmzB/YYDgJbYjRL2I
 WSCVa8Vo+MZaGC/yxdKVTtvsKVQenxGoMO3ojikJeRdvuVRJds48Cw+UBdzWYNeJ
 3Ssvbdx6Xltf9jy/7H0btOUgxPetZuUV+2XpbWfGu0Zr9FcGDv3q9hrxA+UYKnkY
 GIGU0otSsmpHnX5Ms3E2xnHiV/fihxA3qohqts5kYRBDr5uc+IpW6SbDymQliCGG
 OO4XmIVM3pmsqAqP3Zuseemt9CeSW2yC0XlfXkzjO74yY39c+WLBbtGI40Z5W6i0
 mM1C8RD3QSNijYCEC8eqz06BQfRImsPs+jllsnJTZaHfbOsib718uvandjfG26lN
 616YMcqq0Sp51HIQ4qW7f2dQr7vOyNqbukdkrwF5JgkY/nVki5kdciRg/yeipRy6
 Ey80a+OTq0GQljM0F2dcH/A1eHH9KsuI1L6NdSMJsl0h6guIBORPTwTw3qJ13OkR
 wpJyM+Gm+Fk=
 =u/FI
 -----END PGP SIGNATURE-----

Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Arnd Bergmann:
 "These changes are mostly for ARM specific device drivers that either
  don't have an upstream maintainer, or that had the maintainer ask us
  to pick up the changes to avoid conflicts.

  A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
  shmobile), aside from that, reset controllers for STi as well as a
  large rework of the Marvell Orion/EBU watchdog driver are notable"

* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
  Revert "net: stmmac: Add SOCFPGA glue driver"
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
  ARM: STi: Add reset controller support to mach-sti Kconfig
  drivers: reset: stih416: add softreset controller
  drivers: reset: stih415: add softreset controller
  drivers: reset: Reset controller driver for STiH416
  drivers: reset: Reset controller driver for STiH415
  drivers: reset: STi SoC system configuration reset controller support
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  reset: Add optional resets and stubs
  ARM: shmobile: r7s72100: fix bus clock calculation
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
  drivers: cci: Export CCI PMU revision
  ...
2014-04-05 15:37:40 -07:00
Thomas Petazzoni
cece565690 ASoC: add S/PDIF support to Armada 370 DB ASoC driver
The Armada 370 DB board not only has analog audio input/output, but
also S/PDIF input/output. This commit adds support for S/PDIF in the
ASoC machine driver of the Armada 370 DB platform, and adjusts the
Device Tree bindings documentation accordingly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-18 18:38:05 +00:00
Andrew Lunn
ff1f0018cf drivers: Enable building of Kirkwood drivers for mach-mvebu
With the move of kirkwood into mach-mvebu, drivers Kconfig need
tweeking to allow the kirkwood specific drivers to be built.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-24 17:28:31 +00:00
Thomas Petazzoni
74d04c3efb sound: ASoC: add ASoC board driver for Armada 370 DB
This commit adds a simple ASoC board driver fo the Armada 370
Development Board, which connects the audio unit of the Armada 370 SoC
to the I2C-based CS42L51.

For now, only the analog audio input and output through the CS42L51
are supported, but a followup patch adds S/PDIF support to this
driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-14 20:36:34 +00:00
Thomas Petazzoni
9a0d5113ac ASoC: kirkwood: enable Kirkwood driver for mvebu platforms
The audio unit found in the Armada 370 SoC is similar to the one used
in the Marvell Kirkwood and Marvell Dove SoCs. Therefore, this commit
allows the Kirkwood audio driver to be built on mvebu platforms, and
adds an additional compatible string to identify the Armada 370
variant of the audio unit.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-11 12:37:52 +00:00
Mark Brown
701caa51a2 Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/atmel', 'asoc/topic/bcm2835', 'asoc/topic/docs', 'asoc/topic/fsl', 'asoc/topic/generic', 'asoc/topic/kirkwood', 'asoc/topic/mc13783', 'asoc/topic/mxs', 'asoc/topic/nuc900', 'asoc/topic/sai', 'asoc/topic/sh', 'asoc/topic/ssm2602', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl4030', 'asoc/topic/ux500', 'asoc/topic/width' and 'asoc/topic/x86' into for-tiwai 2014-01-16 12:44:01 +00:00
Lars-Peter Clausen
3317208c88 ASoC: kirkwood: Don't set unused struct snd_pcm_hardware fields
The ASoC core assumes that the PCM component of the ASoC card transparently
moves data around and does not impose any restrictions on the memory layout or
the transfer speed. It ignores all fields from the snd_pcm_hardware struct for
the PCM driver that are related to this. Setting these fields in the PCM driver
might suggest otherwise though, so rather not set them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-09 14:28:22 +00:00
Jean-Francois Moine
02fc17c102 ASoC: kirkwood: Fix the CPU DAI rates
This patch fixes the rates declared in the CPU DAI parameters:
- SNDRV_PCM_RATE_KNOT and the discrete rates SNDRV_PCM_RATE_xxx should
  not be used with SNDRV_PCM_RATE_CONTINUOUS,
- SNDRV_PCM_RATE_CONTINUOUS asks for rate_min and rate_max,
- the device may do streaming down to 5512Hz.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-17 14:10:17 +00:00
Jean-Francois Moine
4f6f1478c1 ASoC: kirkwood: Fix erroneous double output while playing
This patch fixes the setting of the register KIRKWOOD_PLAYCTL which did
always streaming on both I2S and SPDIF, ignoring the DAI ID.

The bug was introduced by the commit 75b9b65ee5
 "ASoC: kirkwood: add S/PDIF support"

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27 17:16:21 +00:00
Jean-Francois Moine
1c195ddb1d ASoC: kirkwood: Fix invalid S/PDIF format
This patch removes the 32 bits format which is not supported by S/PDIF
output.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27 16:48:24 +00:00
Linus Torvalds
8ceafbfa91 Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm
Pull DMA mask updates from Russell King:
 "This series cleans up the handling of DMA masks in a lot of drivers,
  fixing some bugs as we go.

  Some of the more serious errors include:
   - drivers which only set their coherent DMA mask if the attempt to
     set the streaming mask fails.
   - drivers which test for a NULL dma mask pointer, and then set the
     dma mask pointer to a location in their module .data section -
     which will cause problems if the module is reloaded.

  To counter these, I have introduced two helper functions:
   - dma_set_mask_and_coherent() takes care of setting both the
     streaming and coherent masks at the same time, with the correct
     error handling as specified by the API.
   - dma_coerce_mask_and_coherent() which resolves the problem of
     drivers forcefully setting DMA masks.  This is more a marker for
     future work to further clean these locations up - the code which
     creates the devices really should be initialising these, but to fix
     that in one go along with this change could potentially be very
     disruptive.

  The last thing this series does is prise away some of Linux's addition
  to "DMA addresses are physical addresses and RAM always starts at
  zero".  We have ARM LPAE systems where all system memory is above 4GB
  physical, hence having DMA masks interpreted by (eg) the block layers
  as describing physical addresses in the range 0..DMAMASK fails on
  these platforms.  Santosh Shilimkar addresses this in this series; the
  patches were copied to the appropriate people multiple times but were
  ignored.

  Fixing this also gets rid of some ARM weirdness in the setup of the
  max*pfn variables, and brings ARM into line with every other Linux
  architecture as far as those go"

* 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits)
  ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
  ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
  ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
  ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
  ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
  ARM: DMA-API: better handing of DMA masks for coherent allocations
  ARM: 7857/1: dma: imx-sdma: setup dma mask
  DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
  DMA-API: dcdbas: update DMA mask handing
  DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
  DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
  DMA-API: crypto: remove last references to 'static struct device *dev'
  DMA-API: crypto: fix ixp4xx crypto platform device support
  DMA-API: others: use dma_set_coherent_mask()
  DMA-API: staging: use dma_set_coherent_mask()
  DMA-API: usb: use new dma_coerce_mask_and_coherent()
  DMA-API: usb: use dma_set_coherent_mask()
  DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()
  DMA-API: net: octeon: use dma_coerce_mask_and_coherent()
  DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()
  ...
2013-11-14 07:55:21 +09:00
Russell King
c9bd5e690a DMA-API: sound: fix dma mask handling in a lot of drivers
This code sequence is unsafe in modules:

static u64 mask = DMA_BIT_MASK(something);
...
	if (!dev->dma_mask)
		dev->dma_mask = &mask;

as if a module is reloaded, the mask will be pointing at the original
module's mask address, and this can lead to oopses.  Moreover, they
all follow this with:

	if (!dev->coherent_dma_mask)
		dev->coherent_dma_mask = mask;

where 'mask' is the same value as the statically defined mask, and this
bypasses the architecture's check on whether the DMA mask is possible.

Fix these issues by using the new dma_coerce_coherent_and_mask()
function.

Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-31 14:48:47 +00:00
Jean-Francois Moine
99d8d3ba51 ASoC: kirkwood: Fix compile error due to patch 'add S/PDIF support'
This patch fixes the compilation error of kirkwood-i2s.c introduced
by the commit 75b9b65ee5 'ASoC: kirkwood: add S/PDIF support'.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-25 09:12:39 +01:00
Jean-Francois Moine
75b9b65ee5 ASoC: kirkwood: add S/PDIF support
This patch adds S/PDIF input/output for mvebu DT boards.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-22 11:18:30 +01:00
Jean-Francois Moine
1f1b65796e ASoC: kirkwood: prefer external clock over internal clock
When there is an external clock, always use this one.
This prevents the two Dove audio devices to use the same DCO clock
at different rates.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-20 17:29:27 +01:00
Vladimir Murzin
e2c9917bfa ASoC: kirkwood: fix compilation warning in kirkwood_dma_open
writel() supposes the first argument of type unsigned int. This fix the
warning:

sound/soc/kirkwood/kirkwood-dma.c: In function 'kirkwood_dma_open':
sound/soc/kirkwood/kirkwood-dma.c:164:3: warning: large integer implicitly
truncated to unsigned type [-Woverflow]

Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-01 11:49:35 +01:00
Jean-Francois Moine
ce3d060990 ASoc: kirkwood: Extend the min and max number of bytes per period
This patch extends the min and max number of bytes per period.
It mainly permits to reduce the sound delay in MIDI real-time playing.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-26 11:18:36 +01:00
Jean-Francois Moine
84aac6c79b ASoC: kirkwood: fix loss of external clock at probe time
At probe time, when the clock driver is not yet initialized, the
external clock of the kirkwood sound device will not be usable.

This patch fixes this problem defering the device probe.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-21 14:31:10 +01:00
Russell King
b51600c019 ASoC: kirkwood-dma: remove IEC958_SUBFRAME formats
The Audio block does not support IEC958 subframes as formatted by
ALSA: they're very close, but not close enough.  The formats differ
by:

3  2   2   2   1   1
1  8   4   0   6   2   8   4   0
PCUVDDDDDDDDDDDDDDDD....AAAATTTT - IEC958 subframe
PCUV0000........DDDDDDDDDDDDDDDD - Audio block format

Where P = parity, C = channel status, U = user data, V = validity,
D = sample data, A = aux, T = preamble.  As can be seen, the
position of the sample is in a different position, and the audio
block does not have the aux or preamble bits.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17 00:39:29 +01:00
Thomas Petazzoni
d098b2f0cf ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver
The compatible string of the kirkwood-i2s driver was chosen as
"marvell,mvebu-audio". Using such a compatible string is not a good
idea, since "mvebu" is the name of a large family of SOCs, in which
new, unknown SOCs will be coming in the future. It is therefore
impossible to know what will be evolutions of this hardware block in
the next generations of the SOCs. For this reason, the recommandation
for compatible strings of on-SOCs devices has always been to use the
name of the oldest SOC that has the hardware block. New SOCs that have
an exactly compatible hardware block can reference it using the same
compatible string. See [1], [2] and [3] for various cases were this
suggestion was made, including from Rob Herring, a Device Tree binding
maintainer.

As an example, there are already small differences between current
generations:

 * On Kirkwood, only one interrupt is used for audio.
 * On Dove, two interrupts are used, one for audio data and one for
   error reporting.

In the near future, I'll be adding audio support to Armada 370, which
allows has the same hardware block (but maybe with minor variants).

Therefore, this patch changes the driver to accept
"marvell,kirkwood-audio" and "marvell,dove-audio" as compatible
strings instead of the too-generic "marvell,mvebu-audio". The reason
for the two different compatible strings is the difference in the
number of interrupts used by the two SOCs for audio.

This Device Tree binding has never been part of a Linux kernel stable
release so far, so it can be changed now without breaking backward
compatibility.

[1] http://lists.infradead.org/pipermail/linux-mtd/2012-March/040417.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/161065.html
[3] http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/087702.html

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-06 10:29:58 +01:00
Jean-Francois Moine
446a3bd432 ASoc: kirkwood: Use the Kirkwood audio driver in Dove boards
This patch permits the generation of the Kirkwood audio driver which
may be used in the Dove boards.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-27 22:01:59 +01:00
Jean-Francois Moine
eb63231830 ASoc: kirkwood: add DT support to the mvebu audio subsystem
This patch adds DT support to the audio subsystem of the mvebu family
(Kirkwood, Dove, Armada 370).

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-22 19:58:14 +01:00
Russell King
e4065f3ff1 ASoC: kirkwood: move calculation of max buffer size to kirkwood.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 18:06:57 +01:00
Russell King
64ddf1f89c ASoC: kirkwood: combine kirkwood-i2s and kirkwood-dma drivers
These really should be a single driver because they're fully integrated
in hardware.  Make them so.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 18:06:30 +01:00
Russell King
db43b16fa0 ASoC: kirkwood: provide KIRKWOOD_PLAYCTL_ENABLE_MASK
Provide a helper macro which includes the sum of all enable bits in
the playback control register.  This simplifies the code a little.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 18:03:23 +01:00
Russell King
af64d7341a ASoC: kirkwood: Free external clock if it is a duplicate of internal
[Remaining patch from "ASoC: kirkwood: use devm_clk_get() for the
external clock" -- broonie]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:11:12 +01:00
Russell King
a7d0942979 ASoC: kirkwood: merge struct kirkwood_dma_priv with struct kirkwood_dma_data
Merge these two structures together; nothing other than the I2S and
DMA driver makes use of struct kirkwood_dma_data, and it's not like
struct kirkwood_dma_data is really just used to convey DMA specific
data to the backend; it's more a general shared structure between the
two halves.

This will later allow kirkwood-dma.c and kirkwood-i2s.c to be merged
together.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 15:49:20 +01:00
Jean-Francois Moine
8a537f85e9 ASoC: kirkwood-i2s: fix a compilation warning
In the function kirkwood_set_rate, when the rate cannot be satisfied
by the internal nor by an external clock, the clock source in undefined:

 warning: ‘clks_ctrl’ may be used uninitialized in this function

The ALSA subsystem should never gives such a rate because:
- the rates with the internal clock are limited to 44.1, 48 and 96 kHz
  as specified by the kirkwood_i2s_dai structure,
- the other rates are proposed in the structure kirkwood_i2s_dai_extclk
  only when the external clock is present.

In case of programming error (bad rate for internal clock and no
external clock), the function will simply cause a backtrace.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-16 11:14:24 +01:00
Mark Brown
9e12cbd932 ASoC: kirkwood-i2s: Inline KIRKWOOD_I2S_RATES
The addition of extclk support makes this misleading as it's only the
rates used when there is no extclk so put it in the specific DAI it
applies to.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-16 10:56:20 +01:00
Mark Brown
6ad74047f4 ASoC: kirkwood-i2s: Remove empty remove()
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-16 10:56:19 +01:00
Mark Brown
4734dc96ea ASoC: kirkwood-i2s: Use devm_clk_get() for extclk
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15 16:43:15 +01:00
Mark Brown
30d3924852 ASoC: kirkwood: Enable build on non-Kirkwood platforms
Improve build coverage by enabling build on other platforms if COMPILE_TEST
is enabled.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15 16:43:15 +01:00
Mark Brown
c50c2f7af1 ASoC: kirkwood: Remove unused headers
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15 16:43:14 +01:00
Mark Brown
6502737276 Merge remote-tracking branch 'asoc/topic/kirkwood' into asoc-next 2013-06-17 17:20:22 +01:00
Wolfram Sang
12716cd44d sound/soc/kirkwood: don't check resource with devm_ioremap_resource
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-18 11:59:45 +02:00
Lars-Peter Clausen
5d0c8a5874 ASoC: kirkwood-dma: Staticize non exported struct
The kirkwood_dma_ops struct is not used outside of kirkwood-dma.c, so make it
static.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15 08:47:37 +04:00
Kuninori Morimoto
83d85f53ad ASoC: switch over to use snd_soc_register_component() on kirkwood i2s
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26 21:57:19 +00:00