Both flush functions have the same error handling routine. Pull
it out as a function.
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ignoring the return value from nfs_pageio_add_request can cause deadlocks.
In read path:
call nfs_pageio_add_request from readpage_async_filler
assume at this point that there are requests already in desc, that
can't be merged with the current request.
so nfs_pageio_doio is fired up to clear out desc.
assume something goes wrong in setting up the io, so desc->pg_error is set.
This causes nfs_pageio_add_request to return 0, *WITHOUT* adding the original
request.
BUT, since return code is ignored, readpage_async_filler assumes it has
been added, and does nothing further, leaving page locked.
do_generic_mapping_read will eventually call lock_page, resulting in deadlock
In write path:
page is marked dirty by generic_perform_write
nfs_writepages is called
call nfs_pageio_add_request from nfs_page_async_flush
assume at this point that there are requests already in desc, that
can't be merged with the current request.
so nfs_pageio_doio is fired up to clear out desc.
assume something goes wrong in setting up the io, so desc->pg_error is set.
This causes nfs_page_async_flush to return 0, *WITHOUT* adding the original
request, yet marking the request as locked (PG_BUSY) and in writeback,
clearing dirty marks.
The next time a write is done to the page, deadlock will result as
nfs_write_end calls nfs_update_request
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The previous value was not taking into account space for bitmap array size.
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFSv4 protocol allows clients to negotiate security protocols on the
fly in the case where an administrator on the server changes the export
settings and/or in the case where we may have a filesystem migration event.
Instead of having the NFS client code cache credentials that are tied to a
particular AUTH method it is therefore preferable to have a generic credential
that can be converted into whatever AUTH is in use by the RPC client when
the read/write/sillyrename/... is put on the wire.
We do this by means of the new "generic" credential, which basically just
caches the minimal information that is needed to look up an RPCSEC_GSS,
AUTH_SYS, or AUTH_NULL credential.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Fix dentry revalidation for NFSv4 referrals and mountpoint crossings
NFS: Fix the fsid revalidation in nfs_update_inode()
SUNRPC: Fix a nfs4 over rdma transport oops
NFS: Fix an f_mode/f_flags confusion in fs/nfs/write.c
As long as the directory contents haven't changed, we should just let the
path walk proceed to cross the mountpoint. Apart from being an optimisation
in the case of 'nohide' mountpoint traversals, it also fixes an issue with
referrals: referral inodes don't have valid filehandles, so calling
nfs_revalidate_inode() on them is a bug.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When we detect that we've crossed a mountpoint on the remote server, we
must take care not to use that inode to revalidate the fsid on our
current superblock. To do so, we label the inode as a remote mountpoint,
and check for that in nfs_update_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS and SELinux worked together previously because SELinux had NFS
specific knowledge built in. This design was approved by both groups
back in 2004 but the recent NFS changes to use nfs_parsed_mount_data and
the usage of nfs_clone_mount_data showed this to be a poor fragile
solution. This patch fixes the NFS functionality regression by making
use of the new LSM interfaces to allow an FS to explicitly set its own
mount options.
The explicit setting of mount options is done in the nfs get_sb
functions which are called before the generic vfs hooks try to set mount
options for filesystems which use text mount data.
This does not currently support NFSv4 as that functionality did not
exist in previous kernels and thus there is no regression. I will be
adding the needed code, which I believe to be the exact same as the v3
code, in nfs4_get_sb for 2.6.26.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: James Morris <jmorris@namei.org>
Now that we've tightened up the locking rules for RPC queue wakeups, we can
remove the RCU-safe kfree calls...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
An audit of the current RPC timeout functions shows that they don't really
ever need to run in the softirq context. As long as the softirq is
able to signal that the wakeup is due to a timeout (which it can do by
setting task->tk_status to -ETIMEDOUT) then the callback functions can just
run as standard task->tk_callback functions (in the rpciod/process
context).
The only possible border-line case would be xprt_timer() for the case of
UDP, when the callback is used to reduce the size of the transport
congestion window. In testing, however, the effect of moving that update
to a callback would appear to be minor.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to ensure that rpc_call_ops that involve mntput() are run on nfsiod
rather than on rpciod, so that they don't deadlock when the resulting
umount calls rpc_shutdown_client(). Hence we specify that read, write and
commit calls must complete on nfsiod.
Ditto for NFSv4 open, lock, locku and close asynchronous calls.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS post-rpciod cleanups often involve tasks that cannot be safely
performed within the rpciod context (due to deadlock concerns). We
therefore add a dedicated NFS workqueue that can perform tasks like
cleaning up state after an interrupted NFSv4 open() call, or calling
put_nfs_open_context() after an asynchronous read or write call.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We can't allow rpc callback functions like task->tk_ops->rpc_call_prepare()
and task->tk_ops->rpc_call_done() to call mntput() in any way, since
that will cause a deadlock when the call to rpc_shutdown_client() attempts
to wait on 'task' to complete.
We can avoid the above deadlock by moving calls to mntput to
task->tk_ops->rpc_release() callback, since at that time the task will be
marked as completed, and so rpc_shutdown_client won't attempt to wait on
it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Sorry for the noise, but here's the v3 of this compilation fix :)
There are some places, which declare the char buf[...] on the stack
to push it later into dprintk(). Since the dprintk sometimes (if the
CONFIG_SYSCTL=n) becomes an empty do { } while (0) stub, these buffers
cause gcc to produce appropriate warnings.
Wrap these buffers with RPC_IFDEBUG macro, as Trond proposed, to
compile them out when not needed.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
fs/nfs/nfs4state.c:788:34: warning: Using plain integer as NULL pointer
fs/nfs/delegation.c:52:34: warning: Using plain integer as NULL pointer
fs/nfs/idmap.c:312:12: warning: Using plain integer as NULL pointer
fs/nfs/callback_xdr.c:257:6: warning: Using plain integer as NULL pointer
fs/nfs/callback_xdr.c:270:6: warning: Using plain integer as NULL pointer
fs/nfs/callback_xdr.c:281:6: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that the reference counting on the callback thread is working as
expected, it uncovers another problem. Peter Staubach noticed while
testing that patch on an older kernel that he would occasionally see
this printk in rpc_register fire:
"RPC: failed to contact portmap (errno -512).
The NFSv4 callback thread is signaled by nfs_callback_down(), but never
flushes that signal. All of the shutdown processing is done with that
signal pending. This makes it fail the call to unregister the port with
the portmapper.
In actuality, this rpc_register call isn't necessary at all since the
port isn't actually registered with the portmapper anymore. Regardless,
there doesn't seem to be any reason to leave the signal pending while
the thread is being shut down and flushing it should generally silence
that printk.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* Add path_put() functions for releasing a reference to the dentry and
vfsmount of a struct path in the right order
* Switch from path_release(nd) to path_put(&nd->path)
* Rename dput_path() to path_put_conditional()
[akpm@linux-foundation.org: fix cifs]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.
Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
<dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
struct path in every place where the stack can be traversed
- it reduces the overall code size:
without patch series:
text data bss dec hex filename
5321639 858418 715768 6895825 6938d1 vmlinux
with patch series:
text data bss dec hex filename
5320026 858418 715768 6894212 693284 vmlinux
This patch:
Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NFS should use GFP_NOFS mode radix tree preloads rather than GFP_ATOMIC
allocations at radix-tree insertion-time. This is important to reduce the
atomic memory requirement.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The error field in nfs_readdir_descriptor_t is never used outside of the
function in which it is set. Remove the field and change the place that
does use it to use an existing local variable.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The warning message for a v4 server returning various bad sequence-ids is
missing spaces.
Signed-off-by: Dan Muntz <dmuntz@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The reference counting for the NFSv4 callback thread stays artificially
high. When this thread comes down, it doesn't properly tear down the
svc_serv, causing a memory leak. In my testing on an older kernel on
x86_64, memory would leak out of the 8k kmalloc slab. So, we're leaking
at least a page of memory every time the thread comes down.
svc_create() creates the svc_serv with a sv_nrthreads count of 1, and
then svc_create_thread() increments that count. Whenever the callback
thread is started it has a sv_nrthreads count of 2. When coming down, it
calls svc_exit_thread() which decrements that count and if it hits 0, it
tears everything down. That never happens here since the count is always
at 2 when the thread exits.
The problem is that nfs_callback_up() should be calling svc_destroy() on
the svc_serv on both success and failure. This is how lockd_up_proto()
handles the reference counting, and doing that here fixes the leak.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the inode is flagged as having an invalid mapping, then we can't rely on
the PageUptodate() flag. Ensure that we don't use the "anti-fragmentation"
write optimisation in nfs_updatepage(), since that will cause NFS to write
out areas of the page that are no longer guaranteed to be up to date.
A potential corruption could occur in the following scenario:
client 1 client 2
=============== ===============
fd=open("f",O_CREAT|O_WRONLY,0644);
write(fd,"fubar\n",6); // cache last page
close(fd);
fd=open("f",O_WRONLY|O_APPEND);
write(fd,"foo\n",4);
close(fd);
fd=open("f",O_WRONLY|O_APPEND);
write(fd,"bar\n",4);
close(fd);
-----
The bug may lead to the file "f" reading 'fubar\n\0\0\0\nbar\n' because
client 2 does not update the cached page after re-opening the file for
write. Instead it keeps it marked as PageUptodate() until someone calls
invaldate_inode_pages2() (typically by calling read()).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Simplify page cache zeroing of segments of pages through 3 functions
zero_user_segments(page, start1, end1, start2, end2)
Zeros two segments of the page. It takes the position where to
start and end the zeroing which avoids length calculations and
makes code clearer.
zero_user_segment(page, start, end)
Same for a single segment.
zero_user(page, start, length)
Length variant for the case where we know the length.
We remove the zero_user_page macro. Issues:
1. Its a macro. Inline functions are preferable.
2. The KM_USER0 macro is only defined for HIGHMEM.
Having to treat this special case everywhere makes the
code needlessly complex. The parameter for zeroing is always
KM_USER0 except in one single case that we open code.
Avoiding KM_USER0 makes a lot of code not having to be dealing
with the special casing for HIGHMEM anymore. Dealing with
kmap is only necessary for HIGHMEM configurations. In those
configurations we use KM_USER0 like we do for a series of other
functions defined in highmem.h.
Since KM_USER0 is depends on HIGHMEM the existing zero_user_page
function could not be a macro. zero_user_* functions introduced
here can be be inline because that constant is not used when these
functions are called.
Also extract the flushing of the caches to be outside of the kmap.
[akpm@linux-foundation.org: fix nfs and ntfs build]
[akpm@linux-foundation.org: fix ntfs build some more]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modify the various kernel RPC svcs to use the svc_create_xprt service.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
Remove commented-out code copied from NFS
NFS: Switch from intr mount option to TASK_KILLABLE
Add wait_for_completion_killable
Add wait_event_killable
Add schedule_timeout_killable
Use mutex_lock_killable in vfs_readdir
Add mutex_lock_killable
Use lock_page_killable
Add lock_page_killable
Add fatal_signal_pending
Add TASK_WAKEKILL
exit: Use task_is_*
signal: Use task_is_*
sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
ptrace: Use task_is_*
power: Use task_is_*
wait: Use TASK_NORMAL
proc/base.c: Use task_is_*
proc/array.c: Use TASK_REPORT
perfmon: Use task_is_*
...
Fixed up conflicts in NFS/sunrpc manually..
The same delegation may have been handed out to more than one nfs_client.
Ensure that if a recall occurs, we return all instances.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If a (broken?) server hands out two different delegations for the same
file, then we should return one of them.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Otherwise, there is a potential deadlock if the last dput() from an NFSv4
close() or other asynchronous operation leads to nfs_clear_inode calling
the synchronous delegreturn.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
David Howells noticed that repeating the same mount option twice during an
NFS mount request can result in orphaned memory in certain cases.
Only the client_address and mount_server.hostname strings are initialized
in the mount parsing loop, so those appear to be the only two pointers that
might be written over by repeating a mount option. The strings in the
nfs_server section of the nfs_parsed_mount_data structure are set only once
after the options are parsed, thus these are not susceptible to being
overwritten.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The rfc doesn't give any reason it shouldn't be possible to set an
attribute on a non-regular file. And if the server supports it, then it
shouldn't be up to us to prevent it.
Thanks to Erez for the report and Trond for further analysis.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Tested-by: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There are no interruptible waits for asynchronous RPC tasks, so we don't
need to wrap calls to rpc_run_task() with an
rpc_clnt_sigmask/rpc_clnt_unsigmask pair.
Instead we can wrap the wait_for_completion_interruptible() in
nfs_direct_wait(). This means that we completely optimise away sigmask
setting for the case of non-blocking aio/dio.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: pass 5 arguments to nlmclnt_init() in a structure similar to the
new nfs_client_initdata structure.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that each NFS mount point caches its own nlm_host structure, it can be
passed to nlmclnt_proc() for each lock request. By pinning an nlm_host for
each mount point, we trade the overhead of looking up or creating a fresh
nlm_host struct during every NLM procedure call for a little extra memory.
We also restrict the nlmclnt_proc symbol to limit the use of this call to
in-tree modules.
Note that nlm_lookup_host() (just removed from the client's per-request
NLM processing) could also trigger an nlm_host garbage collection. Now
client-side nlm_host garbage collection occurs only during NFS mount
processing. Since the NFS client now holds a reference on these nlm_host
structures, they wouldn't have been affected by garbage collection
anyway.
Given that nlm_lookup_host() reorders the global nlm_host chain after
every successful lookup, and that a garbage collection could be triggered
during the call, we've removed a significant amount of per-NLM-request
CPU processing overhead.
Sidebar: there are only a few remaining references to the internals of
NFS inodes in the client-side NLM code. The only references I found are
related to extracting or comparing the inode's file handle via NFS_FH().
One is in nlmclnt_grant(); the other is in nlmclnt_setlockargs().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cache an appropriate nlm_host structure in the NFS client's mount point
metadata for later use.
Note that there is no need to set NFS_MOUNT_NONLM in the error case -- if
nfs_start_lockd() returns a non-zero value, its callers ensure that the
mount request fails outright.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: commit 4899f9c8 added nfs_write_end(), which introduces a
conditional expression that returns an unsigned integer in one arm and
a signed integer in the other.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: PAGE_CACHE_SIZE is unsigned, and nfs_pageio_init() takes a size_t.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: always use the same type when handling buffer lengths. As a
bonus, this prevents a mixed sign comparison in idmap_lookup_name.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The idmap_pipe_upcall() function expects the copy_to_user() function to
return a negative error value if the call fails, but copy_to_user()
returns an unsigned long number of bytes that couldn't be copied.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up white space damage and use standard kernel coding conventions for
return statements.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, if you have a server mounted using networking protocol, you
cannot specify a different value using the 'proto=' option on another
mountpoint.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that the needed IPv6 infrastructure is in place, allow the NFS client's
IP address parser to generate AF_INET6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace the nfs_server and mount_server address fields in the
nfs_parsed_mount_data structure with a "struct sockaddr_storage"
instead of a "struct sockaddr_in".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Refactor the logic to parse incoming text-based IP addresses. Use the
in4_pton() function instead of the older in_aton(), following the lead
of the in-kernel CIFS client.
Later we'll add IPv6 address parsing using the matching in6_pton()
function. For now we can't allow IPv6 address parsing: we must expand
the size of the address storage fields in the nfs_parsed_mount_options
struct before we can parse and store IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In the name of address family compatibility, we can't have the NIP_FMT and
NIPQUAD macros in nfs_try_mount(). Instead, we can make use of an unused
mount option to display the mount server's hostname.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Change the addr field in the nfs_clone_mount structure to store a "struct
sockaddr *" to support non-IPv4 addresses in the NFS client.
Note this is mostly a cosmetic change, and does not actually allow
referrals using IPv6 addresses. The existing referral code assumes that
the server returns a string that represents an IPv4 address. This code
needs to support hostnames and IPv6 addresses as well as IPv4 addresses,
thus it will need to be reorganized completely (to handle DNS resolution
in user space).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adjust the arguments and callers of nfs4_set_client() to pass a "struct
sockaddr *" instead of a "struct sockaddr_in *" to support non-IPv4
addresses in the NFS client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adjust arguments and callers of nfs_get_client() to pass a
"struct sockaddr *" instead of "struct sockaddr_in *" to support
non-IPv4 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adjust arguments and callers of nfs_find_client() to pass a
"struct sockaddr *" instead of "struct sockaddr_in *" to support non-IPv4
addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Trond: Also fix up protocol version number argument in nfs_find_client() to
use the correct u32 type.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Change the addr field in the cb_recallargs struct to a "struct sockaddr *"
to support non-IPv4 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Change the addr field in the cb_getattrargs struct to a "struct sockaddr *"
to support non-IPv4 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prepare for managing larger addresses in the NFS client by widening the
nfs_client struct's cl_addr field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
(Modified to work with the new parameters for nfs_alloc_client)
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Create a helper function to set the default NFS port for NFSv4 mount
points. The helper supports both AF_INET and AF_INET6 family addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We'll need to set the port number of an AF_INET or AF_INET6 address in
several places in fs/nfs/super.c, so introduce a helper that can manage
this for us. We put this helper to immediate use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add support to nfs_verify_server_address for recognizing AF_INET6
addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Refactor nfs_compare_super() and add AF_INET6 support.
Replace the generic memcmp() to document explicitly what parts of the
addresses must match in this check, and make the comparison independent
of the lengths of both addresses.
A side benefit is both tests are more computationally efficient than a
memcmp().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: fix an outdated block comment, and address a comparison
between a signed and unsigned integer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: The client side peer address is available in callback_proc.c,
so move a dprintk out of fs/nfs/callback.c and into
fs/nfs/callback_proc.c.
This is more consistent with other debugging messages, and the proc
routines have more information about each request to display.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To ensure the NFS client displays IPv6 addresses properly, replace
address family-specific NIPQUAD() invocations with a call to the RPC
client to get a formatted string representing the remote peer's
address.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We recently added methods to RPC transports that provide string versions of
the remote peer address information. Convert the NFSv4 SETCLIENTID
procedure to use those methods instead of building the client ID out of
whole cloth.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that the RPC buffer size specified for NFSv4 SETCLIENTID procedures
matches what we are encoding into the buffer. See the definition of
struct nfs4_setclientid {} and the encode_setclientid() function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: The header tag length is unsigned, so checking that it is less
than zero is unnecessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The address comparison in the __nfs_find_client() function is deceptive.
It uses a memcmp() to check a pair of u32 fields for equality. Not only is
this inefficient, but usually memcmp() is used for comparing two *whole*
sockaddr_in's (which includes comparisons of the address family and port
number), so it's easy to mistake the comparison here for a whole sockaddr
comparison, which it isn't.
So for clarity and efficiency, we replace the memcmp() with a simple test
for equality between the two s_addr fields. This should have no
behavioral effect.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: mount option parsing uses kstrndup in several places, rather than
using kzalloc. Replace the few remaining uses of kzalloc with kstrndup,
for consistency.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove the mount option that allows users to specify an alternate mountd
program number. The client hasn't support setting an alternate mountd
program number for a very long time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove the mount option that allows users to specify an alternate NFS
program number. The client hasn't support setting an alternate NFS
program number for a very long time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Text-based mount option parsing introduced a minor regression in the
behavior of NFS version 4 mounts. NFS version 4 is not supposed to require
a running rpcbind service on the server in order for a mount to succeed.
In other words, if the mount options don't specify a port number, the port
number is supposed to default to 2049. For earlier versions of NFS, the
default port number was zero in order to cause the RPC client to autobind
to the server's NFS service.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
POSIX requires that ctime and mtime, as reported by the stat(2) call,
reflect the activity of the most recent write(2). To that end, nfs_getattr()
flushes pending dirty writes to a file before doing a GETATTR to allow the
NFS server to set the file's size, ctime, and mtime properly.
However, nfs_getattr() can be starved when a constant stream of application
writes to a file prevents nfs_wb_nocommit() from completing. This usually
results in hangs of programs doing a stat against an NFS file that is being
written. "ls -l" is a common victim of this behavior.
To prevent starvation, hold the file's i_mutex in nfs_getattr() to
freeze applications writes temporarily so the client can more quickly obtain
clean values for a file's size, mtime, and ctime.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The nfs_wcc_update_inode() function omits logic to convert the type of
the NFS on-the-wire value of a file's size (__u64) to the type of file
size value stored in struct inode (loff_t, which is signed).
Everywhere else in the NFS client I checked already correctly converts the
file size type.
This effects only very large files.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace use of rpc_call_setup() with rpc_init_task(), and in cases where we
need to initialise task->tk_action, with rpc_call_start().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the common code for setting up the nfs_write_data and nfs_read_data
structures into fs/nfs/read.c, fs/nfs/write.c and fs/nfs/direct.c.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
