Commit graph

21 commits

Author SHA1 Message Date
Thiemo Seufer
719b6f29fc BCM1480 serial build fix
Restores serial functionality for the BCM1480.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11 17:21:19 -07:00
Maciej W. Rozycki
b45d527974 sb1250-duart.c: SB1250 DUART serial support
This is a driver for the SB1250 DUART, a dual serial port implementation
included in the Broadcom family of SOCs descending from the SiByte SB1250
MIPS64 chip multiprocessor.  It is a new implementation replacing the
old-fashioned driver currently present in the linux-mips.org tree.  It
supports all the usual features one would expect from a(n asynchronous)
serial driver, including modem line control (as far as hardware supports it
-- there is edge detection logic missing from the DCD and RI lines and the
driver does not implement polling of these lines at the moment), the serial
console, BREAK transmission and reception, including the magic SysRq.  The
receive FIFO threshold is not maintained though.

The driver was tested with a SWARM board which uses a BCM1250 SOC (which is
dual MIPS64 CMP) and has both ports of the single DUART implemented wired
externally.  Both were tested.  Testing included using the ports as
terminal lines at 1200bps (which is the ports minimum), 115200bps and a
couple of random speeds inbetween.  The modem lines were verified to
operate correctly.  No testing was performed with a use as a network
interface, like with SLIP or PPP.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:03 -07:00
Mark Mason
8deab1144b [MIPS] Updated Sibyte headers
This is an update to the earlier patch for the sibyte headers, and superceeds
the previous patch.  Changes were necessary to get the tbprof driver working
on the bcm1480.

Patch to update Sibyte header files to match master versions maintained
at Broadcom.  This patch also corrects some whitespace problems, and
(hopefully) shouldn't introduce any new ones.

Signed-off-by: Mark Mason <mason@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-27 16:20:24 +01:00
Mark Mason
9a9943575a [MIPS] Add missing silicon revisions for BCM112x
Recent versions of the BCM112X processors aren't recognized by Linux
(preventing Linux from booting on those processors).  This patch adds
support for those that are missing.

Signed-off-by: Mark Mason <mason@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-20 14:58:37 +01:00
Ralf Baechle
8fb303c7f1 [MIPS] SB1250: Fix bugs/warnings by creative use of volatile.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-24 17:01:50 +00:00
Ralf Baechle
bb9b813bb6 [MIPS] Sibyte: Fix ZBbus profiler
o Fix build error.
 o Handle error returns.
 o Deal with signals received while sleeping.
 o Don't allow to be selected when we're not building the directory with
   the driver anyway.
 o Coding style cleanups.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-09 20:27:31 +00:00
Ralf Baechle
36a885306f [MIPS] Fix and cleanup the mess that a dozen prom_printf variants are.
early_printk is a so much saner thing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04 19:02:37 +00:00
Atsushi Nemoto
16b7b2ac01 [MIPS] Fixup migration to GENERIC_TIME
Since we already moved to GENERIC_TIME, we should implement alternatives
of old do_gettimeoffset routines to get sub-jiffies resolution from
gettimeofday().  This patch includes:

 * MIPS clocksource support (based on works by Manish Lachwani).
 * remove unused gettimeoffset routines and related codes.
 * remove unised 64bit do_div64_32().
 * simplify mips_hpt_init. (no argument needed, __init tag)
 * simplify c0_hpt_timer_init. (no need to write to c0_count)
 * remove some hpt_init routines.
 * mips_hpt_mask variable to specify bitmask of hpt value.
 * convert jmr3927_do_gettimeoffset to jmr3927_hpt_read.
 * convert ip27_do_gettimeoffset to ip27_hpt_read.
 * convert bcm1480_do_gettimeoffset to bcm1480_hpt_read.
 * simplify sb1250 hpt functions. (no need to subtract and shift)
    
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-31 20:13:23 +00:00
Ralf Baechle
36396f3c36 [MIPS] s/__ASSEMBLER__/__ASSEMBLY__/ for clarity sake.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-27 13:37:57 +01:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Ralf Baechle
a904f74785 [MIPS] Sibyte: Fix race in sb1250_gettimeoffset().
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>:
    
sb1250_gettimeoffset() simply reads the current cpu 0 timer remaining
value, however once this counter reaches 0 and the interrupt is raised,
it immediately resets and begins to count down again.
    
If sb1250_gettimeoffset() is called on cpu 1 via do_gettimeofday() after
the timer has reset but prior to cpu 0 processing the interrupt and
taking write_seqlock() in timer_interrupt() it will return a full value
(or close to it) causing time to jump backwards 1ms. Once cpu 0 handles
the interrupt and timer_interrupt() gets far enough along it will jump
forward 1ms.
    
Fix this problem by implementing mips_hpt_*() on sb1250 using a spare
timer unrelated to the existing periodic interrupt timers. It runs at
1Mhz with a full 23bit counter.  This eliminated the custom
do_gettimeoffset() for sb1250 and allowed use of the generic
fixed_rate_gettimeoffset() using mips_hpt_*() and timerhi/timerlo.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18 16:59:30 +00:00
Ralf Baechle
a77f124294 [MIPS] Sibyte: Fix M_SCD_TIMER_INIT and M_SCD_TIMER_CNT wrong field width.
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>:
    
Field width should be 23 bits not 20 bits.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18 16:59:29 +00:00
Andrew Isaacson
9a6dcea103 Support for BigSur board.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:47 +01:00
Andrew Isaacson
4f19f99047 Sibyte header cleanup
Update sibyte headers to match Broadcom internal copies:
 - comment cleanup and updates
 - fix LittleSur part number to match the board silkscreen
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:46 +01:00
Andrew Isaacson
4cbf2beac2 BCM1480 headers
Add header files for BCM1480/1280/1455/1255 family of chips, and
update sb1250 headers which are shared by BCM1480 family.
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/include/asm-mips/sibyte/bcm1480_int.h b/include/asm-mips/sibyte/bcm1480_int.h
new file mode 100644
2005-10-29 19:32:45 +01:00
Ralf Baechle
3cd9b6802d Cleanup Sibyte Kconfig a bit further.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:39 +01:00
Ralf Baechle
fe00f943e0 Sparseify MIPS.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:50 +01:00
Maciej W. Rozycki
65bda1a95d Switch SiByte drivers back to __raw_*() functions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:44 +01:00
Maciej W. Rozycki
6b12397954 Fix compilation; by Manish Lachwani.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:20 +01:00
Ralf Baechle
42a3b4f25a [PATCH] mips: nuke trailing whitespace
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:07 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00