Commit graph

14 commits

Author SHA1 Message Date
Rusty Russell
2a57ff1a70 [PATCH] i386: Rename cpu_gdt_descr and remove extern declaration from smpboot.c
When I implemented the DECLARE_PER_CPU(var) macros, I was careful that
people couldn't use "var" in a non-percpu context, by prepending
percpu__.  I never considered that this would allow them to overload
the same name for a per-cpu and a non-percpu variable.

It is only one of many horrors in the i386 boot code, but let's rename
the non-perpcu cpu_gdt_descr to early_gdt_descr (not boot_gdt_descr,
that's something else...)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>

===================================================================
2007-02-13 13:26:26 +01:00
Rusty Russell
139ec7c416 [PATCH] paravirt: Patch inline replacements for paravirt intercepts
It turns out that the most called ops, by several orders of magnitude,
are the interrupt manipulation ops.  These are obvious candidates for
patching, so mark them up and create infrastructure for it.

The method used is that the ops structure has a patch function, which
is called for each place which needs to be patched: this returns a
number of instructions (the rest are NOP-padded).

Usually we can spare a register (%eax) for the binary patched code to
use, but in a couple of critical places in entry.S we can't: we make
the clobbers explicit at the call site, and manually clobber the
allowed registers in debug mode as an extra check.

And:

Don't abuse CONFIG_DEBUG_KERNEL, add CONFIG_DEBUG_PARAVIRT.

And:

AK:  Fix warnings in x86-64 alternative.c build

And:

AK: Fix compilation with defconfig

And:

^From: Andrew Morton <akpm@osdl.org>

Some binutlises still like to emit references to __stop_parainstructions and
__start_parainstructions.

And:

AK: Fix warnings about unused variables when PARAVIRT is disabled.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07 02:14:08 +01:00
Rusty Russell
d3561b7fa0 [PATCH] paravirt: header and stubs for paravirtualisation
Create a paravirt.h header for all the critical operations which need to be
replaced with hypervisor calls, and include that instead of defining native
operations, when CONFIG_PARAVIRT.

This patch does the dumbest possible replacement of paravirtualized
instructions: calls through a "paravirt_ops" structure.  Currently these are
function implementations of native hardware: hypervisors will override the ops
structure with their own variants.

All the pv-ops functions are declared "fastcall" so that a specific
register-based ABI is used, to make inlining assember easier.

And:

+From: Andy Whitcroft <apw@shadowen.org>

The paravirt ops introduce a 'weak' attribute onto memory_setup().
Code ordering leads to the following warnings on x86:

    arch/i386/kernel/setup.c:651: warning: weak declaration of
                `memory_setup' after first use results in unspecified behavior

Move memory_setup() to avoid this.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
2006-12-07 02:14:07 +01:00
Stas Sergeev
be44d2aabc [PATCH] i386: espfix cleanup
Clean up the espfix code:

- Introduced PER_CPU() macro to be used from asm
- Introduced GET_DESC_BASE() macro to be used from asm
- Rewrote the fixup code in asm, as calling a C code with the altered %ss
  appeared to be unsafe
- No longer altering the stack from a .fixup section
- 16bit per-cpu stack is no longer used, instead the stack segment base
  is patched the way so that the high word of the kernel and user %esp
  are the same.
- Added the limit-patching for the espfix segment. (Chuck Ebbert)

[jeremy@goop.org: use the x86 scaling addressing mode rather than shifting]
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Zachary Amsden <zach@vmware.com>
Acked-by: Chuck Ebbert <76306.1226@compuserve.com>
Acked-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07 02:14:01 +01:00
Jeremy Fitzhardinge
e5e3a04289 [PATCH] i386: remove default_ldt, and simplify ldt-setting.
This patch removes the default_ldt[] array, as it has been unused since
iBCS stopped being supported.  This means it is now possible to actually
set an empty LDT segment.

In order to deal with this, the set_ldt_desc/load_LDT pair has been
replaced with a single set_ldt() operation which is responsible for both
setting up the LDT descriptor in the GDT, and reloading the LDT register.
If there are no LDT entries, the LDT register is loaded with a NULL
descriptor.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Acked-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07 02:14:01 +01:00
Jeremy Fitzhardinge
2817716ace [PATCH] i386: Fix pack_descriptor()
Fix pack_descriptor:
 1. flags are bits 20-23 in the high word
 2. limit's 4 msb are bits 16-19 in the high word

These haven't mattered so far, because all users have had small limits
and a flags setting of 0.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>

===================================================================
2006-09-26 10:52:40 +02:00
Rusty Russell
522e93e3fc [PATCH] i386: Descriptor and trap table cleanups.
The implementation comes from Zach's [RFC, PATCH 10/24] i386 Vmi
descriptor changes:

Descriptor and trap table cleanups.  Add cleanly written accessors for
IDT and GDT gates so the subarch may override them.  Note that this
allows the hypervisor to transparently tweak the DPL of the descriptors
as well as the RPL of segments in those descriptors, with no unnecessary
kernel code modification.  It also allows the hypervisor implementation
of the VMI to tweak the gates, allowing for custom exception frames or
extra layers of indirection above the guest fault / IRQ handlers.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26 10:52:35 +02:00
James Bottomley
2b932f6cf0 [PATCH] x86: fix broken SMP boot sequence
Recent GDT changes broke the SMP boot sequence if the booting CPU is
numbered anything other than zero.  There's also a subtle source of error
in that the boot time CPU now uses cpu_gdt_table (which is actually the GDT
for booting CPUs in head.S).  This patch fixes both problems by making GDT
descriptors themselves allocated from a per_cpu area and switching to them
in cpu_init(), which now means that cpu_gdt_table is exclusively used for
booting CPUs again.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Matt Tolentino <metolent@snoqualmie.dp.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-24 14:31:38 -08:00
Zachary Amsden
7c4cb60e5b [PATCH] x86: GDT alignment fix
Make GDT page aligned and page padded to support running inside of a
hypervisor.  This prevents false sharing of the GDT page with other hot
data, which is not allowed in Xen, and causes performance problems in
VMware.

Rather than go back to the old method of statically allocating the GDT
(which wastes unneded space for non-present CPUs), the GDT for APs is
allocated dynamically.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: "Seth, Rohit" <rohit.seth@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:33 -08:00
Zachary Amsden
251e6912df [PATCH] x86: add an accessor function for getting the per-CPU gdt
Add an accessor function for getting the per-CPU gdt.  Callee must already
have the CPU.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:12 -08:00
Zachary Amsden
f2f30ebca6 [PATCH] x86: introduce a write acessor for updating the current LDT
Introduce a write acessor for updating the current LDT.  This is required
for hypervisors like Xen that do not allow LDT pages to be directly
written.

Testing - here's a fun little LDT test that can be trivially modified to
test limits as well.

/*
 * Copyright (c) 2005, Zachary Amsden (zach@vmware.com)
 * This is licensed under the GPL.
 */

#include <stdio.h>
#include <signal.h>
#include <asm/ldt.h>
#include <asm/segment.h>
#include <sys/types.h>
#include <unistd.h>
#include <sys/mman.h>
#define __KERNEL__
#include <asm/page.h>

void main(void)
{
        struct user_desc desc;
        char *code;
        unsigned long long tsc;

        code = (char *)mmap(0, 8192, PROT_EXEC|PROT_READ|PROT_WRITE,
                                 MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
        desc.entry_number = 0;
        desc.base_addr = code;
        desc.limit = 1;
        desc.seg_32bit = 1;
        desc.contents = MODIFY_LDT_CONTENTS_CODE;
        desc.read_exec_only = 0;
        desc.limit_in_pages = 1;
        desc.seg_not_present = 0;
        desc.useable = 1;
        if (modify_ldt(1, &desc, sizeof(desc)) != 0) {
                perror("modify_ldt");
        }
        printf("code base is 0x%08x\n", (unsigned)code);
        code[0x0ffe] = 0x0f;  /* rdtsc */
        code[0x0fff] = 0x31;
        code[0x1000] = 0xcb;  /* lret */
        __asm__ __volatile("lcall $7,$0xffe" : "=A" (tsc));
        printf("TSC is 0x%016llx\n", tsc);
}

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:13 -07:00
Zachary Amsden
2f2984eb4a [PATCH] i386: generate better code around descriptor update and access functions
GCC can generate better code around descriptor update and access functions
when there is not an explicit "eax" register constraint.

Testing: You won't boot if this is messed up, since the TSS descriptor will be
corrupted.  Verified the assembler and booted.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:11 -07:00
Zachary Amsden
4d37e7e3fd [PATCH] i386: inline assembler: cleanup and encapsulate descriptor and task register management
i386 inline assembler cleanup.

This change encapsulates descriptor and task register management.  Also,
it is possible to improve assembler generation in two cases; savesegment
may store the value in a register instead of a memory location, which
allows GCC to optimize stack variables into registers, and MOV MEM, SEG
is always a 16-bit write to memory, making the casting in math-emu
unnecessary.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:11 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00