We were freeing an offset into the slab object instead of the
start. This patch fixes it by calling crypto_destroy_tfm which
allows the correct address to be given.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Geert Uytterhoeven pointed out that we're not zeroing all the
memory when freeing a transform. This patch fixes it by calling
ksize to ensure that we zero everything in sight.
Reported-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Module reference counting for shash is incorrect: when
a new shash transformation is created the refcount is not
increased as it should.
Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the PM core always attempts to manage devices with drivers
that use the new PM framework. In particular, it attempts to disable
the devices (which is unnecessary), to save their state (which may be
undesirable if the driver has done that already) and to put them into
low power states (again, this may be undesirable if the driver has
already put the device into a low power state). That need not be
the right thing to do, so make the core be more careful in this
respect.
Generally, there are the following categories of devices to consider:
* bridge devices without drivers
* non-bridge devices without drivers
* bridge devices with drivers
* non-bridge devices with drivers
and each of them should be handled differently.
For bridge devices without drivers the PCI PM core will save their
state on suspend and restore it (early) during resume, after putting
them into D0 if necessary. It will not attempt to do anything else
to these devices.
For non-bridge devices without drivers the PCI PM core will disable
them and save their state on suspend. During resume, it will put
them into D0, if necessary, restore their state (early) and reenable
them.
For bridge devices with drivers the PCI PM core will only save
their state on suspend if the driver hasn't done that already.
Still, the core will restore their state (early) during resume,
after putting them into D0, if necessary.
For non-bridge devices with drivers the PCI PM core will only save
their state on suspend if the driver hasn't done that already. Also,
if the state of the device hasn't been saved by the driver, the core
will attempt to put the device into a low power state. During
resume the core will restore the state of the device (early), after
putting it into D0, if necessary.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
pci_restore_standard_config() unconditionally changes current_state
to PCI_D0 after attempting to change the device's power state, but
it should rather read the actual current power state from the
device.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
It is a mistake to disable and enable PCI bridges and PCI Express
ports during suspend-resume, at least at the time when it is
currently done. Disabling them may lead to problems with accessing
devices behind them and they should be automatically enabled when
their standard config spaces are restored. Fix this by not attempting
to disable bridges during suspend and enable them during resume.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Simplify suspend and resume of the PCI Express port driver. It no
longer needs to save and restore the standard configuration space of the
device; this is now done by the PCI PM core layer.
This patch is reported to fix the regression tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12598
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Parag Warudkar <parag.lkml@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Make pci_legacy_suspend() save the state of the device if it is
in PCI_UNKNOWN after its suspend callback has run and warn only if
the power state of the device has been changed by its suspend
callback.
Also, use WARN_ONCE(), which is more useful, in pci_legacy_suspend(),
so that the name of the offending function is printed.
Additionally, remove the unnecessary line of code setting
pci_dev->state_saved.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Check if the standard configuration registers of a PCI device have
been saved during suspend before trying to restore them during
resume.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-By: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Suspend to RAM is reported to break on some machines as a result of
attempting to put one of driverless PCI devices into a low power
state. Avoid that by not attepmting to power manage driverless
devices during suspend.
Fix up pci_pm_poweroff() after a previous incomplete fix for the same
thing during hibernation.
This patch is reported to fix the regression from 2.6.28 tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12605
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch makes the ROM reading code return an error to user space if
the size of the ROM read is equal to 0.
The patch also emits a warnings if the contents of the ROM are invalid,
and documents the effects of the "enable" file on ROM reading.
Signed-off-by: Timothy S. Nelson <wayland@wayland.id.au>
Acked-by: Alex Villacis-Lasso <a_villacis@palosanto.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We only want to disable ASPM when the last function is removed from
the parent's device list. We determine this by checking to see if
the parent's device list is completely empty.
Unfortunately, we never hit that code because the parent is considered
an upstream port, and never had an ASPM link_state associated with it.
The early check for !link_state causes us to return early, we never
discover that our device list is empty, and thus we never remove the
downstream ports' link_state nodes.
Instead of checking to see if the parent's device list is empty, we can
check to see if we are the last device on the list, and if so, then we
know that we can clean up properly.
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
SOFT_RESET must be asserted for at least 3 TX clocks in order for it to work
properly. The syncs in the gfar_write() commands have been hiding this, but
we need to guarantee it.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BD_LENGTH_MASK is supposed to catch the low 16-bits of the status field, not
the low byte. The old way, we would never be able to clean up tx packets with
sizes divisible by 256.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The LRO switch is always set to 1 in the rx processing loop.
It breaks the accelerated iSCSI receive traffic.
Fix its computation.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: APIC: enable workaround on AMD Fam10h CPUs
xen: disable interrupts before saving in percpu
x86: add x86@kernel.org to MAINTAINERS
x86: push old stack address on irqstack for unwinder
irq, x86: fix lock status with numa_migrate_irq_desc
x86: add cache descriptors for Intel Core i7
x86/Voyager: make it build and boot
Cleans uCode key table bit map iwl_clear_stations_table
since all stations are cleared also the key table must be.
Since the keys are not removed properly on suspend by mac80211
this may result in exhausting key table on resume leading
to memory corruption during removal
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This reverts commit 0e0333429a.
I committed this by accident - Joel and Louis are working with the lockdep
maintainer to provide a better solution than just turning lockdep off.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: <Joel Becker <joel.becker@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: pcm_oss: AFMT_S24_LE is set twice in return value
ALSA: ASoC: email - update email addresses.
OMAP: ASoC: Fix spinlock misuse in omap-pcm.c
ALSA: hda - No widget selection for volume knob widgets in proc output
ALSA: hda - Add support of iMac 24 Aluminium
ALSA: alsa: time reaches -1, tested 0
ALSA: hda - Add quirk for another HP dv5 model
AFMT_S24_LE is set twice in return value
vi sound/core/oss/pcm_oss.c +640
#define AFMT_S24_LE 0x00008000
#define AFMT_S24_BE 0x00010000
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (40 commits)
Blackfin arch: Remove outdated code
Blackfin arch: Fix udelay implementation
Blackfin arch: Update Copyright information
Blackfin arch: Add BF561 PPI POLS, POLC Masks
Blackfin arch: Update CM-BF527 kernel config
Blackfin arch: define bfin_memmap as static since it is only used here
Blackfin arch: cplb mananger: use a do...while loop rather than a for loop
Blackfin arch: fix bug - traps test case 19 for exception 0x2d fails
Blackfin arch: add platform device bfin_mii-bus and KSZ8893M switch driver platform resources to board files
Blackfin arch: build jtag tty driver as a module by default
Blackfin arch: fix 2 bugs related to debug
Blackfin arch: Add ANOMALY_05000380 to BF54x to kill the compile warning
Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2
Blackfin arch: base SIC_IWR# programming on whether the MMR exists
Blackfin arch: read SYSCR on newer parts that mirror the bits of SWRST in it
Blackfin arch: fixup board init function name
Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefs
Blackfin arch: bfin_reset->_bfin_reset redirection no longer needed
Blackfin arch: sync reboot handler with version in u-boot
Blackfin arch: Faster Implementation of csum_tcpudp_nofold()
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc64: Kill bogus TPC/address truncation during 32-bit faults.
sparc: fixup for sparseirq changes
sparc64: Validate kernel generated fault addresses on sparc64.
sparc64: On non-Niagara, need to touch NMI watchdog in NOHZ mode.
sparc64: Implement NMI watchdog on capable cpus.
sparc: Probe PMU type and record in sparc_pmu_type.
sparc64: Move generic PCR support code to seperate file.
On fast devices that go from congested to uncongested very quickly, pdflush
is waiting too often in congestion_wait, and the FS is backing off to
easily in write_cache_pages.
For now, fix this on the btrfs side by only checking congestion after
some bios have already gone down. Longer term a real fix is needed
for pdflush, but that is a larger project.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Whenever an item deletion is done, we need to balance all the nodes
in the tree to make sure we don't end up with an empty node if a pointer
is deleted. This balance prep happens from the root of the tree down
so we can drop our locks as we go.
reada_for_balance was triggering read-ahead on neighboring nodes even
when no balancing was required. This adds an extra check to avoid
calling balance_level() and avoid reada_for_balance() when a balance
won't be required.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_unlock_up_safe would break out at the first NULL node entry or
unlocked node it found in the path.
Some of the callers have missing nodes at the lower levels of the path, so this
commit fixes things to check all the nodes in the path before returning.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_del_leaf does two things. First it removes the pointer in the
parent, and then it frees the block that has the leaf. It has the
parent node locked for both operations.
But, it only needs the parent locked while it is deleting the pointer.
After that it can safely free the block without the parent locked.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_truncate_inode_items is setup to stop doing btree searches when
it has finished removing the items for the inode. It used to detect the
end of the inode by looking for an objectid that didn't match the
one we were searching for.
But, this would result in an extra search through the btree, which
adds extra balancing and cow costs to the operation.
This commit adds a check to see if we found the inode item, which means
we can stop searching early.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The compression code had some checks to make sure we were only
compressing bytes inside of i_size, but it wasn't catching every
case. To make things worse, some incorrect math about the number
of bytes remaining would make it try to compress more pages than the
file really had.
The fix used here is to fall back to the non-compression code in this
case, which does all the proper cleanup of delalloc and other accounting.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
With selinux on we end up calling __btrfs_setxattr when we create an inode,
which calls btrfs_start_transaction(). The problem is we've already called
that in btrfs_new_inode, and in btrfs_start_transaction we end up doing a
wait_current_trans(). If btrfs-transaction has started committing it will wait
for all handles to finish, while the other process is waiting for the
transaction to commit. This is fixed by using btrfs_join_transaction, which
won't wait for the transaction to commit. Thanks,
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Before this patch, new files/dirs would ignore the SGID bit on their
parent directory and always be owned by the creating user's uid/gid.
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Every transaction in btrfs creates a new snapshot, and then schedules the
snapshot from the last transaction for deletion. Snapshot deletion
works by walking down the btree and dropping the reference counts
on each btree block during the walk.
If if a given leaf or node has a reference count greater than one,
the reference count is decremented and the subtree pointed to by that
node is ignored.
If the reference count is one, walking continues down into that node
or leaf, and the references of everything it points to are decremented.
The old code would try to work in small pieces, walking down the tree
until it found the lowest leaf or node to free and then returning. This
was very friendly to the rest of the FS because it didn't have a huge
impact on other operations.
But it wouldn't always keep up with the rate that new commits added new
snapshots for deletion, and it wasn't very optimal for the extent
allocation tree because it wasn't finding leaves that were close together
on disk and processing them at the same time.
This changes things to walk down to a level 1 node and then process it
in bulk. All the leaf pointers are sorted and the leaves are dropped
in order based on their extent number.
The extent allocation tree and commit code are now fast enough for
this kind of bulk processing to work without slowing the rest of the FS
down. Overall it does less IO and is better able to keep up with
snapshot deletions under high load.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Most of the btrfs metadata operations can be protected by a spinlock,
but some operations still need to schedule.
So far, btrfs has been using a mutex along with a trylock loop,
most of the time it is able to avoid going for the full mutex, so
the trylock loop is a big performance gain.
This commit is step one for getting rid of the blocking locks entirely.
btrfs_tree_lock takes a spinlock, and the code explicitly switches
to a blocking lock when it starts an operation that can schedule.
We'll be able get rid of the blocking locks in smaller pieces over time.
Tracing allows us to find the most common cause of blocking, so we
can start with the hot spots first.
The basic idea is:
btrfs_tree_lock() returns with the spin lock held
btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in
the extent buffer flags, and then drops the spin lock. The buffer is
still considered locked by all of the btrfs code.
If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops
the spin lock and waits on a wait queue for the blocking bit to go away.
Much of the code that needs to set the blocking bit finishes without actually
blocking a good percentage of the time. So, an adaptive spin is still
used against the blocking bit to avoid very high context switch rates.
btrfs_clear_lock_blocking() clears the blocking bit and returns
with the spinlock held again.
btrfs_tree_unlock() can be called on either blocking or spinning locks,
it does the right thing based on the blocking bit.
ctree.c has a helper function to set/clear all the locked buffers in a
path as blocking.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Before metadata is written to disk, it is updated to reflect that writeout
has begun. Once this update is done, the block must be cow'd before it
can be modified again.
This update was originally synchronized by using a per-fs spinlock. Today
the buffers for the metadata blocks are locked before writeout begins,
and everyone that tests the flag has the buffer locked as well.
So, the per-fs spinlock (called hash_lock for no good reason) is no
longer required.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
extent_io.c has debugging code to report and free leaked extent_state
and extent_buffer objects at rmmod time. This helps track down
leaks and it saves you from rebooting just to properly remove the
kmem_cache object.
But, the code runs under a fairly expensive spinlock and the checks to
see if it is currently enabled are not entirely consistent. Some use
#ifdef and some #if.
This changes everything to #if and disables the leak checking.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When a block goes through cow, we update the reference counts of
everything that block points to. The internal pointers of the block
can be in just about any order, and it is likely to have clusters of
things that are close together and clusters of things that are not.
To help reduce the seeks that come with updating all of these reference
counts, sort them by byte number before actual updates are done.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Tracing shows the delay between when an async thread goes to sleep
and when more work is added is often very short. This commit adds
a little bit of delay and extra checking to the code right before
we schedule out.
It allows more work to be added to the worker
without requiring notifications from other procs.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Add call to LSM security initialization and save
resulting security xattr for new inodes.
Add xattr support to symlink inode ops.
Set inode->i_op for existing special files.
Signed-off-by: jim owens <jowens@hp.com>
This patch adds a menu entry to kconfig to enable acls for btrfs.
This allows you to enable FS_POSIX_ACL at kernel compile time.
(updated by Jeff Mahoney to make the changes in fs/btrfs/Kconfig instead)
Signed-off-by: Christian Hesse <mail@earthworm.de>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
The async bio submission thread was missing some bios that were
added after it had decided there was no work left to do.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The removed version with the loop registers saved on the stack was
originally intended to workaround the missing toolchain support for
LoopReg Clobbers.
Since our toolchain now supports these there is no point in keeping this
workaround. And since we don't touch LoopRegs anymore we're no longer
subject for ANOMALY_05000312.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Avoid possible overflow during 32*32->32 multiplies.
Reported-by: Marco Reppenhagen <marco.reppenhagen@auerswald.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
