Commit graph

284 commits

Author SHA1 Message Date
Yevgeny Petrilin
31dd272e8c mlx4_core: Add ConnectX-3 device IDs
...as already added to pci.ids.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28 15:24:55 -08:00
Aleksey Senin
da995a8aee IB/mlx4: Handle protocol field in multicast table
The newest device firmware stores IB vs. Ethernet protocol in two bits
in members_count field of multicast group table (0: Infiniband, 1:
Ethernet).  When changing the QP members count for a multicast group,
it important not to reset this information.  When calling multicast
attach first time, the protocol type should be specified.  In this
patch we always set it IB, but in the future we will handle Ethernet
too.  When looking for a QP, the protocol type shoud be checked too.

Signed-off-by: Aleksey Senin <alekseys@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12 14:49:17 -08:00
Roland Dreier
4979d18fe1 mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)
Some systems have PCI addresses that don't fit in unsigned long (eg some
32-bit PowerPC 440 systems have 36-bit bus addresses).  Fix up mlx4 drivers
by using phys_addr_t where appropriate, so we don't truncate any PCI
resource addresses before ioremapping them.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12 09:50:36 -08:00
Linus Torvalds
4162cf6497 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (67 commits)
  cxgb4vf: recover from failure in cxgb4vf_open()
  netfilter: ebtables: make broute table work again
  netfilter: fix race in conntrack between dump_table and destroy
  ah: reload pointers to skb data after calling skb_cow_data()
  ah: update maximum truncated ICV length
  xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC
  ehea: Increase the skb array usage
  net/fec: remove config FEC2 as it's used nowhere
  pcnet_cs: add new_id
  tcp: disallow bind() to reuse addr/port
  net/r8169: Update the function of parsing firmware
  net: ppp: use {get,put}_unaligned_be{16,32}
  CAIF: Fix IPv6 support in receive path for GPRS/3G
  arp: allow to invalidate specific ARP entries
  net_sched: factorize qdisc stats handling
  mlx4: Call alloc_etherdev to allocate RX and TX queues
  net: Add alloc_netdev_mqs function
  caif: don't set connection request param size before copying data
  cxgb4vf: fix mailbox data/control coherency domain race
  qlcnic: change module parameter permissions
  ...
2011-01-11 16:32:41 -08:00
Ali Ayoub
030b4b3309 mlx4_core: Avoid vunmap() of invalid pointer if allocation fails
Signed-off-by: Ali Ayoub <ali@mellanox.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:06 -08:00
Roland Dreier
f5a49539a6 mlx4_core: Remove warning message about firmware bug
The kernel warning message added in commit 58d74bb1d9 ("mlx4_core:
Workaround firmware bug in query dev cap") about mlx4 reporting the
wrong number of "blue flame registers" doesn't really help anyone, since
the firmware bug is known and fixed and the bug is pretty much harmless
to users.  So just get rid of the warning.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10 17:42:05 -08:00
Tom Herbert
f1593d2298 mlx4: Call alloc_etherdev to allocate RX and TX queues
Changed driver to call alloc_etherdev_mqs so that the number of TX
and RX queues can be set to correct values in the netdev device.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10 16:05:31 -08:00
Linus Torvalds
75318ec327 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB: Fix information leak in marshalling code
  IB/pack: Remove some unused code added by the IBoE patches
  IB/mlx4: Fix IBoE link state
  IB/mlx4: Fix IBoE reported link rate
  mlx4_core: Workaround firmware bug in query dev cap
  IB/mlx4: Fix memory ordering of VLAN insertion control bits
  MAINTAINERS: Update NetEffect entry
2010-12-02 12:10:56 -08:00
Eli Cohen
58d74bb1d9 mlx4_core: Workaround firmware bug in query dev cap
ConnectX firmware is supposed to report the number blue flame
registers per page as log2 of the value.  However, due to a firmware
bug, it reports actual number.  This patch works around this by
checking if the number of registers calculated fits within a page.  If
it does not, we use 8 registers per page.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-12-01 16:08:47 -08:00
Linus Torvalds
22cdbd1d57 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits)
  ehea: Fixing statistics
  bonding: Fix lockdep warning after bond_vlan_rx_register()
  tunnels: Fix tunnels change rcu protection
  caif-u5500: Build config for CAIF shared mem driver
  caif-u5500: CAIF shared memory mailbox interface
  caif-u5500: CAIF shared memory transport protocol
  caif-u5500: Adding shared memory include
  drivers/isdn: delete double assignment
  drivers/net/typhoon.c: delete double assignment
  drivers/net/sb1000.c: delete double assignment
  qlcnic: define valid vlan id range
  qlcnic: reduce rx ring size
  qlcnic: fix mac learning
  ehea: fix use after free
  inetpeer: __rcu annotations
  fib_rules: __rcu annotates ctarget
  tunnels: add __rcu annotations
  net: add __rcu annotations to protocol
  ipv4: add __rcu annotations to routes.c
  qlge: bugfix: Restoring the vlan setting.
  ...
2010-10-27 18:28:00 -07:00
Linus Torvalds
9e5fca251f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits)
  IB/qib: clean up properly if pci_set_consistent_dma_mask() fails
  IB/qib: Allow driver to load if PCIe AER fails
  IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set
  IB/qib: Fix extra log level in qib_early_err()
  RDMA/cxgb4: Remove unnecessary KERN_<level> use
  RDMA/cxgb3: Remove unnecessary KERN_<level> use
  IB/core: Add link layer type information to sysfs
  IB/mlx4: Add VLAN support for IBoE
  IB/core: Add VLAN support for IBoE
  IB/mlx4: Add support for IBoE
  mlx4_en: Change multicast promiscuous mode to support IBoE
  mlx4_core: Update data structures and constants for IBoE
  mlx4_core: Allow protocol drivers to find corresponding interfaces
  IB/uverbs: Return link layer type to userspace for query port operation
  IB/srp: Sync buffer before posting send
  IB/srp: Use list_first_entry()
  IB/srp: Reduce number of BUSY conditions
  IB/srp: Eliminate two forward declarations
  IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144
  IB: Replace EXTRA_CFLAGS with ccflags-y
  ...
2010-10-26 17:54:22 -07:00
Roland Dreier
116e9535fe Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iboe', 'ipoib', 'misc', 'mlx4', 'nes', 'qib' and 'srp' into for-next 2010-10-26 16:09:11 -07:00
Eli Cohen
0926f91083 mlx4_en: Fix out of bounds array access
When searching for a free entry in either mlx4_register_vlan() or
mlx4_register_mac(), and there is no free entry, the loop terminates without
updating the local variable free thus causing out of array bounds access. Fix
this by adding a proper check outside the loop.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25 12:14:11 -07:00
Eli Cohen
4c3eb3ca13 IB/mlx4: Add VLAN support for IBoE
This patch allows IBoE traffic to be encapsulated in 802.1Q tagged
VLAN frames.  The VLAN tag is encoded in the GID and derived from it
by a simple computation.

The netdev notifier callback is modified to catch VLAN device
addition/removal and the port's GID table is updated to reflect the
change, so that for each netdevice there is an entry in the GID table.
When the port's GID table is exhausted, GID entries will not be added.
Only children of the main interfaces can add to the GID table; if a
VLAN interface is added on another VLAN interface (e.g. "vconfig add
eth2.6 8"), then that interfaces will not add an entry to the GID
table.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen
7ac870ed7d mlx4_en: Change multicast promiscuous mode to support IBoE
Change multicast promiscuous mode to pass packets through the multicast group distribution table
before sending packets that miss to the default multicast QP.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen
96dfa684c8 mlx4_core: Update data structures and constants for IBoE
Add fields to hardware data structures and add new constants required for IBoE
support.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
Eli Cohen
33c87f0af6 mlx4_core: Allow protocol drivers to find corresponding interfaces
Add a mechanism for mlx4 protocol drivers to get a pointer to other
drivers's device objects.  For this, an exported function,
mlx4_get_protocol_dev() is added, which allows a driver to get some
other driver's device based on the protocol that the driver
implements.  Two protocols are added: MLX4_PROTOCOL_IB and
MLX4_PROTOCOL_EN.

This will be used in mlx4 IBoE support so that mlx4_ib can find the
corresponding mlx4_en netdev.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>

[ Clean up and rename a few things.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25 10:20:39 -07:00
stephen hemminger
9740d78604 mlx4: make functions local and remove dead code.
Make the following function static: mlx4_UNMAP_ICM
Remove the following unused function:  mlx4_MAP_ICM_page

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 14:55:47 -07:00
Jesse Gross
eab6d18d20 vlan: Don't check for vlan group before vlan_tx_tag_present.
Many (but not all) drivers check to see whether there is a vlan
group configured before using a tag stored in the skb.  There's
not much point in this check since it just throws away data that
should only be present in the expected circumstances.  However,
it will soon be legal and expected to get a vlan tag when no
vlan group is configured, so remove this check from all drivers
to avoid dropping the tags.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 01:26:52 -07:00
Eli Cohen
0498628f97 mlx4_core: Allow log_mtts_per_seg up to 7
As there are now machines with a lot more physical memory, we need to
be able to register more memory. This patch lifts the upper limit of
log_mtts_per_seg from 5 to 7, increasing the amount of memory that can
be registered.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 20:48:49 -07:00
Ben Hutchings
1eb63a2814 mlx4_en: Use netif_set_real_num_{rx, tx}_queues()
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27 22:09:54 -07:00
Eric Dumazet
807540baae drivers/net: return operator cleanup
Change "return (EXPR);" to "return EXPR;"

return is not a function, parentheses are not required.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26 18:34:29 -07:00
Yevgeny Petrilin
d61702f127 mlx4_en: Fixed Ethtool statistics report
The values didn't match the title after removing the LRO
statistics in commit fa37a9586f

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06 18:48:44 -07:00
Yevgeny Petrilin
ebc872c7bd mlx4_en: Consider napi_get_frags() failure.
If failed to get skb frags using napi_get_frags(),
the packet is dropped.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06 18:48:44 -07:00
Akinobu Mita
e27cd4f8ca mlx4: use bitmap library
Replace loops calling set_bit() and clear_bit() with bitmap_set() and
bitmap_clear().

Unlike loops calling set_bit() and clear_bit(), bitmap_set() and
bitmap_clear() are not atomic. But this is ok.
Because the bitmap operations are protected by bitmap->lock
except for initialization of the bitmap in mlx4_bitmap_init().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-28 15:37:04 -07:00
David S. Miller
4562487a00 mlx4_en: Fix build warning in mlx4_en_create_rx_ring.
drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_create_rx_ring’:
drivers/net/mlx4/en_rx.c:305: warning: label ‘err_map’ defined but not used

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 15:06:27 -07:00
Yevgeny Petrilin
04714a16db mlx4_en: updated driver version
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 15:00:42 -07:00
Yevgeny Petrilin
fa37a9586f mlx4_en: Moving to work with GRO
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 15:00:42 -07:00
Yevgeny Petrilin
0533943c5c mlx4_en: UDP RSS support
Adding capability for RSS for UDP traffic, hashing is done based on
IP addresses and UDP port number.
The support depends on HW/FW capabilities.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:57:09 -07:00
Yevgeny Petrilin
d7e1a487d3 mlx4_en: reconfiguring mac address.
When Mac address is removed from one port of the CX2 device, the other device
should reconfigure its Mac.
This fixes an issue with failover, when both ports have the same Mac address,
and one of the ports, is closed, the second one stops receiving traffic.
(bugzilla #1965 at bugs.openfabrics.org)

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:53 -07:00
Yevgeny Petrilin
bc081cecf3 mlx4_en: get/set ringsize uses actual ring size
In case that the rings were not fully filled, the report in Ethtool
should be according to the actual size that was filled.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:52 -07:00
Yevgeny Petrilin
7699517db4 mlx4_en: Fixing report in Ethtool get_settings
The report now based on query from FW, giving the correct tranciever type
and link speed.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:51 -07:00
Yevgeny Petrilin
e7c1c2c462 mlx4_en: Added self diagnostics test implementation
The selftest includes 5 features:
1. Interrupt test: Executing commands and receiving command completion
   on all our interrupt vectors.
2. Link test: Verifying we are connected to valid link partner.
3. Speed test: Check that we negotiated link speed correctly.
4. Registers test: Activate HW health check command.
5. Loopback test: Send a packet on loopback interface and catch it on RX side.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:51 -07:00
Yevgeny Petrilin
3005ad40b9 mlx4_en: Validate port up prior to transmitting
We might try to use resources which were not activated.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:50 -07:00
Yevgeny Petrilin
e5cc44b2eb mlx4_en: Reporting link state with KERN_INFO
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:49 -07:00
Yevgeny Petrilin
a0b4e6e09c mlx4_en: Fixed MAX_TX_RINGS definition
Defined as sum of default number of TX rings and number of
rings used for priority flow control mode.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:49 -07:00
Yevgeny Petrilin
7c2873809d mlx4_en: performing CLOSE_PORT at the end of tear-down process
All port's resources should be closed before we give the
CLOSE_PORT command to the firmware.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:48 -07:00
Yevgeny Petrilin
8bf2e58f8b mlx4_en: Setting dev->perm_addr field
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:48 -07:00
Yevgeny Petrilin
00d7d7bc6e mlx4_en: Setting actual RX ring size
When configuring HW resources, the RX ring size that is passed should be the actual
size that depends on number of buffers that we succeeded to allocate.
The mask for ring size should also be configured accordingly

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:47 -07:00
Yevgeny Petrilin
69351a2933 mlx4_en: Fixed incorrect unmapping on RX flow.
When allocating new fragments to replace the ones that would be passed to the stack,
The fragments that should be replaced, are the ones that were already used.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24 14:54:47 -07:00
Amerigo Wang
f3c58aceaa mlx4: remove num_lro parameter
As suggested by David, this parameter can die, we can use ethtool
to turn LRO on/off. Compile tests only.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22 21:43:58 -07:00
Joe Perches
baeb2ffab4 drivers/net: Convert unbounded kzalloc calls to kcalloc
These changes may be slightly safer in some instances.

There are other kzalloc calls with a multiply, but those
calls are typically "small fixed #" * sizeof(some pointer)"
and those are not converted.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17 17:45:14 -07:00
Joe Perches
0a645e8097 drivers/net/mlx4: Use %pV, pr_<level>, printk_once
Remove near duplication of format string constants by using the newly
introduced vsprintf extention %pV to reduce text by 20k or so.

$ size drivers/net/mlx4/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 161367	   1866	  48784	 212017	  33c31	drivers/net/mlx4/built-in.o
 142621	   1866	  46248	 190735	  2e90f	drivers/net/mlx4/built-in.o.new

Use printk_once as appropriate.
Convert printks to pr_<level>, some bare printks now use pr_cont.
Remove now unused #define PFX.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15 19:05:17 -07:00
Amerigo Wang
d2ef859034 mlx4: add dynamic LRO disable support
This patch adds dynamic LRO diable support for mlx4 net driver.
It also fixes a bug of mlx4, which checks NETIF_F_LRO flag in rx
path without rtnl lock.

(I don't have mlx4 card, so only did compiling test. Anyone who wants
to test this is more than welcome.)

This is based on Neil's initial work too, and heavily modified based
on Stanislaw's suggestions.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Neil Horman <nhorman@redhat.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28 23:04:10 -07:00
Eric Dumazet
ba2d358791 drivers/net: use __packed annotation
cleanup patch.

Use new __packed annotation in drivers/net/

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03 03:18:23 -07:00
Eli Cohen
741a00be1f mlx4_en: use net_device dev_id to indicate port number
Today, there are no means to know which port of a hardware device a netdev
interface uses. struct net_device conatins a field, dev_id, that can be used
for that. Use this field to save the port number in ConnectX that is being used
by the net device; port numbers are zero based.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31 00:27:45 -07:00
Linus Torvalds
8e9815a0f8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix incorrect unlock in nes_process_mac_intr()
  RDMA/nes: Async event for closed QP causes crash
  RDMA/nes: Have ethtool read hardware registers for rx/tx stats
  RDMA/cxgb4: Only insert sq qid in lookup table
  RDMA/cxgb4: Support IB_WR_READ_WITH_INV opcode
  RDMA/cxgb4: Set fence flag for inv-local-stag work requests
  RDMA/cxgb4: Update some HW limits
  RDMA/cxgb4: Don't limit fastreg page list depth
  RDMA/cxgb4: Return proper errors in fastreg mr/pbl allocation
  RDMA/cxgb4: Fix overflow bug in CQ arm
  RDMA/cxgb4: Optimize CQ overflow detection
  RDMA/cxgb4: CQ size must be IQ size - 2
  RDMA/cxgb4: Register RDMA provider based on LLD state_change events
  RDMA/cxgb4: Detach from the LLD after unregistering RDMA device
  IB/ipath: Remove support for QLogic PCIe QLE devices
  IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters
  IB/mad: Make needlessly global mad_sendq_size/mad_recvq_size static
  IB/core: Allow device-specific per-port sysfs files
  mlx4_core: Clean up mlx4_alloc_icm() a bit
  mlx4_core: Fix possible chunk sg list overflow in mlx4_alloc_icm()
2010-05-25 12:05:17 -07:00
Thomas Gleixner
3142788b79 drivers/base: Convert dev->sem to mutex
The semaphore is semantically a mutex. Convert it to a real mutex and
fix up a few places where code was relying on semaphore.h to be included
by device.h, as well as the users of the trylock function, as that value
is now reversed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Roland Dreier
c050def076 mlx4_core: Clean up mlx4_alloc_icm() a bit
Handle the allocation error case first, so that we don't have further
nested if for handling the common case of success.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-20 15:58:22 -07:00
Sebastien Dugue
c0dc72bad9 mlx4_core: Fix possible chunk sg list overflow in mlx4_alloc_icm()
If the number of sg entries in the ICM chunk reaches MLX4_ICM_CHUNK_LEN,
we must set chunk to NULL even for coherent mappings so that the next
time through the loop will allocate another chunk.  Otherwise we'll
overflow the sg list the next time through the loop.  This will lead to
memory corruption if this case is hit.

mthca does not have this bug.

Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-20 15:58:22 -07:00