Commit graph

2674 commits

Author SHA1 Message Date
Linus Torvalds
dc50eddb2f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix test of uninitialized netdev
2011-03-25 21:06:37 -07:00
Linus Torvalds
00a2470546 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
  route: Take the right src and dst addresses in ip_route_newports
  ipv4: Fix nexthop caching wrt. scoping.
  ipv4: Invalidate nexthop cache nh_saddr more correctly.
  net: fix pch_gbe section mismatch warning
  ipv4: fix fib metrics
  mlx4_en: Removing HW info from ethtool -i report.
  net_sched: fix THROTTLED/RUNNING race
  drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region
  drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region
  bonding: fix rx_handler locking
  myri10ge: fix rmmod crash
  mlx4_en: updated driver version to 1.5.4.1
  mlx4_en: Using blue flame support
  mlx4_core: reserve UARs for userspace consumers
  mlx4_core: maintain available field in bitmap allocator
  mlx4: Add blue flame support for kernel consumers
  mlx4_en: Enabling new steering
  mlx4: Add support for promiscuous mode in the new steering model.
  mlx4: generalization of multicast steering.
  mlx4_en: Reporting HW revision in ethtool -i
  ...
2011-03-25 21:02:22 -07:00
Roland Dreier
cf55bb2439 RDMA/nes: Fix test of uninitialized netdev
Commit 1765a57533 ("net: make dev->master general") introduced a
test of an uninitialized netdev.  Fix the code so the intended netdev
is tested.

Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-24 17:18:30 -07:00
Linus Torvalds
0625bef606 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB: Increase DMA max_segment_size on Mellanox hardware
  IB/mad: Improve an error message so error code is included
  RDMA/nes: Don't print success message at level KERN_ERR
  RDMA/addr: Fix return of uninitialized ret value
  IB/srp: try to use larger FMR sizes to cover our mappings
  IB/srp: add support for indirect tables that don't fit in SRP_CMD
  IB/srp: rework mapping engine to use multiple FMR entries
  IB/srp: allow sg_tablesize to be set for each target
  IB/srp: move IB CM setup completion into its own function
  IB/srp: always avoid non-zero offsets into an FMR
2011-03-24 07:59:46 -07:00
Yevgeny Petrilin
0345584e0b mlx4: generalization of multicast steering.
The same packet steering mechanism would be used both for IB and Ethernet,
Both multicasts and unicasts.
This commit prepares the general infrastructure for this.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23 12:24:21 -07:00
Yevgeny Petrilin
725c89997e mlx4_en: Reporting HW revision in ethtool -i
HW revision is derived from device ID and rev id.

Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23 12:24:20 -07:00
Roland Dreier
ba82638247 Merge branches 'misc', 'nes' and 'srp' into for-next 2011-03-23 11:13:37 -07:00
David Dillow
7f9e5c48c1 IB: Increase DMA max_segment_size on Mellanox hardware
By default, each device is assumed to be able only handle 64 KB chunks
during DMA. By giving the segment size a larger value, the block layer
will coalesce more S/G entries together for SRP, allowing larger
requests with the same sg_tablesize setting.  The block layer is the
only direct user of it, though a few IOMMU drivers reference it as
well for their *_map_sg coalescing code. pci-gart_64 on x86, and a
smattering on on sparc, powerpc, and ia64.

Since other IB protocols could potentially see larger segments with
this, let's check those:

 - iSER is fine, because you limit your maximum request size to 512
   KB, so we'll never overrun the page vector in struct iser_page_vec
   (128 entries currently). It is independent of the DMA segment size,
   and handles multi-page segments already.

 - IPoIB is fine, as it maps each page individually, and doesn't use
   ib_dma_map_sg().

 - RDS appears to do the right thing and has no dependencies on DMA
   segment size, but I don't claim to have done a complete audit.

 - NFSoRDMA and 9p are OK -- they do not use ib_dma_map_sg(), so they
   doesn't care about the coalescing.

 - Lustre's ko2iblnd does not care about coalescing -- it properly
   walks the returned sg list.

This patch ups the value on Mellanox hardware to 1 GB, which matches
reported firmware limits on mlx4.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-22 09:39:18 -07:00
Roland Dreier
071c778347 Merge branch 'external-indirect' of git://git.kernel.org/pub/scm/linux/kernel/git/dad/srp-initiator into srp 2011-03-21 11:52:00 -07:00
Michael Heinz
1eba843dd7 IB/mad: Improve an error message so error code is included
Signed-off-by: Michael Heinz <michael.heinz@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-18 09:42:20 -07:00
Roland Dreier
748bfd9c1d RDMA/nes: Don't print success message at level KERN_ERR
There's no reason to print "NetEffect RNIC driver successfully loaded" 
at level KERN_ERR (where it will uglify the console on a quiet boot).
Change it to KERN_INFO.

Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-18 08:52:30 -07:00
Linus Torvalds
ec0afc9311 Merge branch 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (55 commits)
  KVM: unbreak userspace that does not sets tss address
  KVM: MMU: cleanup pte write path
  KVM: MMU: introduce a common function to get no-dirty-logged slot
  KVM: fix rcu usage in init_rmode_* functions
  KVM: fix kvmclock regression due to missing clock update
  KVM: emulator: Fix permission checking in io permission bitmap
  KVM: emulator: Fix io permission checking for 64bit guest
  KVM: SVM: Load %gs earlier if CONFIG_X86_32_LAZY_GS=n
  KVM: x86: Remove useless regs_page pointer from kvm_lapic
  KVM: improve comment on rcu use in irqfd_deassign
  KVM: MMU: remove unused macros
  KVM: MMU: cleanup page alloc and free
  KVM: MMU: do not record gfn in kvm_mmu_pte_write
  KVM: MMU: move mmu pages calculated out of mmu lock
  KVM: MMU: set spte accessed bit properly
  KVM: MMU: fix kvm_mmu_slot_remove_write_access dropping intermediate W bits
  KVM: Start lock documentation
  KVM: better readability of efer_reserved_bits
  KVM: Clear async page fault hash after switching to real mode
  KVM: VMX: Initialize vm86 TSS only once.
  ...
2011-03-17 18:40:35 -07:00
Linus Torvalds
c55d267de2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits)
  [SCSI] scsi_dh_rdac: Add MD36xxf into device list
  [SCSI] scsi_debug: add consecutive medium errors
  [SCSI] libsas: fix ata list corruption issue
  [SCSI] hpsa: export resettable host attribute
  [SCSI] hpsa: move device attributes to avoid forward declarations
  [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26)
  [SCSI] sd: Logical Block Provisioning update
  [SCSI] Include protection operation in SCSI command trace
  [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)
  [SCSI] target: Fix volume size misreporting for volumes > 2TB
  [SCSI] bnx2fc: Broadcom FCoE offload driver
  [SCSI] fcoe: fix broken fcoe interface reset
  [SCSI] fcoe: precedence bug in fcoe_filter_frames()
  [SCSI] libfcoe: Remove stale fcoe-netdev entries
  [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h
  [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument
  [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs
  [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out"
  [SCSI] libfc: Fixing a memory leak when destroying an interface
  [SCSI] megaraid_sas: Version and Changelog update
  ...

Fix up trivial conflicts due to whitespace differences in
drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
2011-03-17 17:54:40 -07:00
Sean Hefty
1bdd6384c2 RDMA/addr: Fix return of uninitialized ret value
Commit b23dd4fe42 ("ipv4: Make output route lookup return rtable
directly") resulted in leaving ret uninitialized, where it may later
be returned.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-17 17:00:19 -07:00
Huang Ying
0014bd990e mm: export __get_user_pages
In most cases, get_user_pages and get_user_pages_fast should be used
to pin user pages in memory.  But sometimes, some special flags except
FOLL_GET, FOLL_WRITE and FOLL_FORCE are needed, for example in
following patch, KVM needs FOLL_HWPOISON.  To support these users,
__get_user_pages is exported directly.

There are some symbol name conflicts in infiniband driver, fixed them too.

Signed-off-by: Huang Ying <ying.huang@intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Michel Lespinasse <walken@google.com>
CC: Roland Dreier <roland@kernel.org>
CC: Ralph Campbell <infinipath@qlogic.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-17 13:08:27 -03:00
Linus Torvalds
7a6362800c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
  bonding: enable netpoll without checking link status
  xfrm: Refcount destination entry on xfrm_lookup
  net: introduce rx_handler results and logic around that
  bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
  bonding: wrap slave state work
  net: get rid of multiple bond-related netdevice->priv_flags
  bonding: register slave pointer for rx_handler
  be2net: Bump up the version number
  be2net: Copyright notice change. Update to Emulex instead of ServerEngines
  e1000e: fix kconfig for crc32 dependency
  netfilter ebtables: fix xt_AUDIT to work with ebtables
  xen network backend driver
  bonding: Improve syslog message at device creation time
  bonding: Call netif_carrier_off after register_netdevice
  bonding: Incorrect TX queue offset
  net_sched: fix ip_tos2prio
  xfrm: fix __xfrm_route_forward()
  be2net: Fix UDP packet detected status in RX compl
  Phonet: fix aligned-mode pipe socket buffer header reserve
  netxen: support for GbE port settings
  ...

Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.
2011-03-16 16:29:25 -07:00
David Dillow
be8b981453 IB/srp: try to use larger FMR sizes to cover our mappings
Now that we can get larger SG lists, we can take advantage of HCAs that
allow us to use larger FMR sizes. In many cases, we can use up to 512
entries, so start there and work our way down.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:41:30 -04:00
David Dillow
c07d424d61 IB/srp: add support for indirect tables that don't fit in SRP_CMD
This allows us to guarantee the ability to submit up to 8 MB requests
based on the current value of SCSI_MAX_SG_CHAIN_SEGMENTS. While FMR will
usually condense the requests into 8 SG entries, it is imperative that
the target support external tables in case the FMR mapping fails or is
not supported.

We add a safety valve to allow targets without the needed support to
reap the benefits of the large tables, but fail in a manner that lets
the user know that the data didn't make it to the device. The user must
add "allow_ext_sg=1" to the target parameters to indicate that the
target has the needed support.

If indirect_sg_entries is not specified in the modules options, then
the sg_tablesize for the target will default to cmd_sg_entries unless
overridden by the target options.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:37:23 -04:00
David Dillow
8f26c9ff9c IB/srp: rework mapping engine to use multiple FMR entries
Instead of forcing all of the S/G entries to fit in one FMR, and falling
back to indirect descriptors if that fails, allow the use of as many
FMRs as needed to map the request. This lays the groundwork for allowing
indirect descriptor tables that are larger than can fit in the command
IU, but should marginally improve performance now by reducing the number
of indirect descriptors needed.

We increase the minimum page size for the FMR pool to 4K, as larger
pages help increase the coverage of each FMR, and it is rare that the
kernel would send down a request with scattered 512 byte fragments.

This patch also move some of the target initialization code afte the
parsing of options, to keep it together with the new code that needs to
allocate memory based on the options given.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:35:16 -04:00
David Dillow
4924864404 IB/srp: allow sg_tablesize to be set for each target
Different configurations of target software allow differing max sizes of
the command IU. Allowing this to be changed per-target allows all
targets on an initiator to get an optimal setting.

We deprecate srp_sg_tablesize and replace it with cmd_sg_entries in
preparation for allowing more indirect descriptors than can fit in the
IU.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:35:05 -04:00
David Dillow
961e0be89a IB/srp: move IB CM setup completion into its own function
This is to clean up prior to further changes.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:34:48 -04:00
David Dillow
8c4037b501 IB/srp: always avoid non-zero offsets into an FMR
It is unclear exactly how this code works around Mellanox SRP targets,
or if the problem is on the target side or in the HCA itself. In an
abundance of caution, we should always enable the workaround.

Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15 19:34:28 -04:00
Roland Dreier
043332cf28 Merge branches 'cma', 'cxgb4', 'ipath' and 'qib' into for-next 2011-03-15 10:58:04 -07:00
Sean Hefty
a396d43a35 RDMA/cma: Replace global lock in rdma_destroy_id() with id-specific one
rdma_destroy_id currently uses the global rdma cm 'lock' to test if an
rdma_cm_id has been bound to a device.  This prevents an active
address resolution callback handler from assigning a device to the
rdma_cm_id after rdma_destroy_id checks for one.

Instead, we can replace the use of the global lock around the check to
the rdma_cm_id device pointer by setting the id state to destroying,
then flushing all active callbacks.  The latter is accomplished by
acquiring and releasing the handler_mutex.  Any active handler will
complete first, and any newly scheduled handlers will find the
rdma_cm_id in an invalid state.

In addition to optimizing the current locking scheme, the use of the
rdma_cm_id mutex is a more intuitive synchronization mechanism than
that of the global lock.  These changes are based on feedback from
Doug Ledford <dledford@redhat.com> while he was trying to debug a
crash in the rdma cm destroy path.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:57:34 -07:00
Sean Hefty
8d8ac86564 IB/cm: Cancel pending LAP message when exiting IB_CM_ESTABLISH state
This problem was reported by Moni Shoua <monis@mellanox.com> and Amir
Vadai <amirv@mellanox.com>:

	When destroying a cm_id from a context of a work queue and if
	the lap_state of this cm_id is IB_CM_LAP_SENT, we need to
	release the reference of this id that was taken upon the send
	of the LAP message.  Otherwise, if the expected APR message
	gets lost, it is only after a long time that the reference
	will be released, while during that the work handler thread is
	not available to process other things.

It turns out that we need to cancel any pending LAP messages whenever
we transition out of the IB_CM_ESTABLISH state.  This occurs when
disconnecting - either sending or receiving a DREQ.  It can also
happen in a corner case where we receive a REJ message after sending
an RTU, followed by a LAP.  Add checks and cancel any outstanding LAP
messages in these three cases.

Canceling the LAP when sending a DREQ fixes the destroy problem
reported by Moni.  When a cm_id is destroyed in the IB_CM_ESTABLISHED
state, it sends a DREQ to the remote side to notify the peer that the
connection is going away.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:56:12 -07:00
Sean Hefty
29963437a4 IB/cm: Bump reference count on cm_id before invoking callback
When processing a SIDR REQ, the ib_cm allocates a new cm_id.  The
refcount of the cm_id is initialized to 1.  However, cm_process_work
will decrement the refcount after invoking all callbacks.  The result
is that the cm_id will end up with refcount set to 0 by the end of the
sidr req handler.

If a user tries to destroy the cm_id, the destruction will proceed,
under the incorrect assumption that no other threads are referencing
the cm_id.  This can lead to a crash when the cm callback thread tries
to access the cm_id.

This problem was noticed as part of a larger investigation with kernel
crashes in the rdma_cm when running on a real time OS.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:56:12 -07:00
Sean Hefty
25ae21a101 RDMA/cma: Fix crash in request handlers
Doug Ledford and Red Hat reported a crash when running the rdma_cm on
a real-time OS.  The crash has the following call trace:

    cm_process_work
       cma_req_handler
          cma_disable_callback
          rdma_create_id
             kzalloc
             init_completion
          cma_get_net_info
          cma_save_net_info
          cma_any_addr
             cma_zero_addr
          rdma_translate_ip
             rdma_copy_addr
          cma_acquire_dev
             rdma_addr_get_sgid
             ib_find_cached_gid
             cma_attach_to_dev
          ucma_event_handler
             kzalloc
             ib_copy_ah_attr_to_user
          cma_comp

[ preempted ]

    cma_write
        copy_from_user
        ucma_destroy_id
           copy_from_user
           _ucma_find_context
           ucma_put_ctx
           ucma_free_ctx
              rdma_destroy_id
                 cma_exch
                 cma_cancel_operation
                 rdma_node_get_transport

        rt_mutex_slowunlock
        bad_area_nosemaphore
        oops_enter

They were able to reproduce the crash multiple times with the
following details:

    Crash seems to always happen on the:
            mutex_unlock(&conn_id->handler_mutex);
    as conn_id looks to have been freed during this code path.

An examination of the code shows that a race exists in the request
handlers.  When a new connection request is received, the rdma_cm
allocates a new connection identifier.  This identifier has a single
reference count on it.  If a user calls rdma_destroy_id() from another
thread after receiving a callback, rdma_destroy_id will proceed to
destroy the id and free the associated memory.  However, the request
handlers may still be in the process of running.  When control returns
to the request handlers, they can attempt to access the newly created
identifiers.

Fix this by holding a reference on the newly created rdma_cm_id until
the request handler is through accessing it.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15 10:00:28 -07:00
Nicolas Kaiser
2a543904dd IB/ipath: Don't reset disabled devices
The comment some lines above states that disabled devices must not reset.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
2011-03-14 14:25:59 -07:00
Mitko Haralanov
36b87b419c IB/qib: Fix M_Key field in SubnGet and SubnGetResp MADs
Set the M_Key field in SubnGet and SugnGetResp MADs based on correctly
interpreting the protection level specified in the M_KeyProtBits field.

Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:11:51 -07:00
Mitko Haralanov
4634b7945c IB/qib: Set default LE2 value for active cables to 0
For active and far-EQ cables use an LE2 value of 0 for improved SI.

Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:10:34 -07:00
Steve Wise
db5d040d7b RDMA/cxgb4: Debugfs dump_qp() updates
- Show whether the SQ is in onchip memory or not.
- Dump both SQ and RQ QIDs.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:14 -07:00
Steve Wise
767fbe8151 RDMA/cxgb4: Dispatch FATAL event on EEH errors
This at least kicks the user mode applications that are watching for
device events.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:13 -07:00
Steve Wise
b48f3b9c10 RDMA/cxgb4: Use ULP_MODE_TCPDDP
Set the ULP mode for initial RDMA connection setup to the proper DDP
mode.  This avoids wasting some HW resources while in streaming mode.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:12 -07:00
Steve Wise
a9c7719800 RDMA/cxgb4: Enable on-chip SQ support by default
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:12 -07:00
Steve Wise
ffc3f7487f RDMA/cxgb4: Do CIDX_INC updates every 1/16 CQ depth CQE reaps
This avoids the CIDX_INC overflow issue with T4A2 when running
kernel RDMA applications.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:11 -07:00
Steve Wise
2942813739 RDMA/cxgb4: Remove db_drop_task
Unloading iw_cxgb4 can crash due to the unload code trying to use
db_drop_task, which is uninitialized.  So remove this dead code.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:10 -07:00
Steve Wise
b52fe09e33 RDMA/cxgb4: Turn on delayed ACK
Set the default to on.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14 12:09:09 -07:00
David S. Miller
4c9483b2fb ipv6: Convert to use flowi6 where applicable.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:54 -08:00
David S. Miller
1d28f42c1b net: Put flowi_* prefix on AF independent members of struct flowi
I intend to turn struct flowi into a union of AF specific flowi
structs.  There will be a common structure that each variant includes
first, much like struct sock_common.

This is the first step to move in that direction.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:44 -08:00
David S. Miller
78fbfd8a65 ipv4: Create and use route lookup helpers.
The idea here is this minimizes the number of places one has to edit
in order to make changes to how flows are defined and used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:42 -08:00
David S. Miller
b23dd4fe42 ipv4: Make output route lookup return rtable directly.
Instead of on the stack.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 14:31:35 -08:00
David S. Miller
273447b352 ipv4: Kill can_sleep arg to ip_route_output_flow()
This boolean state is now available in the flow flags.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01 14:27:04 -08:00
David S. Miller
420d44daa7 ipv4: Make final arg to ip_route_output_flow to be boolean "can_sleep"
Since that is what the current vague "flags" argument means.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01 14:19:23 -08:00
Mike Christie
7c53c6f89d [SCSI] iser: export addr and port
This pactch has iser export the address and port
of the endpoint.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-24 12:41:23 -05:00
Mitko Haralanov
cc7fb05946 IB/qib: Return correct MAD when setting link width to 255
Fix a bug which causes the driver to return incorrect MADs as a
response to Set(PortInfo) which sets the link width to 0xFF or link
speed to 0xF.

Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-22 16:56:37 -08:00
David S. Miller
da935c66ba Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/e1000e/netdev.c
	net/xfrm/xfrm_policy.c
2011-02-19 19:17:35 -08:00
Roland Dreier
814b0a6120 Merge branches 'nes' and 'qib' into for-next 2011-02-17 14:04:59 -08:00
Mike Marciniszyn
c0af2c057d IB/qib: Prevent double completions after a timeout or RNR error
There is a double completion associated with error handling for RC QPs.

The sequence is:

 - The do_rc_ack() routine fields an RNR nack and there are 0
   rnr_retries configured on the QP.
 - qib_error_qp() stops the pending timer
 - qib_rc_send_complete() is called from sdma_complete()
 - qib_rc_send_complete() starts the timer because the msb of the psn
   just completed says an ack is needed.
 - a bunch of flushes occur as ipoib posts WQEs to an error'ed QP
 - rc_timeout() calls qib_restart_rc()
 - qib_restart_rc() calls qib_send_complete() with a
   IB_WC_RETRY_EXC_ERR on a wqe that has already been completed in the
   past

The fix avoids starting the timer since another packet will never
arrive.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-17 14:04:50 -08:00
Jiri Pirko
1765a57533 net: make dev->master general
dev->master is now tightly connected to bonding driver. This patch makes
this pointer more general and ready to be used by others.

 - netdev_set_master() - bond specifics moved to new function
   netdev_set_bond_master()
 - introduced netif_is_bond_slave() to check if device is a bonding slave

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13 10:42:07 -08:00
Mike Marciniszyn
414ed90cee IB/qib: Fix double add_timer()
The following panic BUG_ON occurs during qib testing:

    Kernel BUG at include/linux/timer.h:82

    RIP  [<ffffffff881f7109>] :ib_qib:start_timer+0x73/0x89
     RSP <ffffffff80425bd0>
     <0>Kernel panic - not syncing: Fatal exception
     <0>Dumping qib trace buffer from panic
    qib_set_lid INFO: IB0:1 got a lid: 0xf8
    Done dumping qib trace buffer
    BUG: warning at kernel/panic.c:137/panic() (Tainted: G

The flaw is due to a missing state test when processing responses that
results in an add_timer() call when the same timer is already queued.
This code was executing in parallel with a QP destroy on another CPU
that had changed the state to reset, but the missing test caused to
response handling code to run on into the panic.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-10 11:24:08 -08:00