Commit graph

18781 commits

Author SHA1 Message Date
Takashi Sakamoto
a6975f2af8 ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data
According to AM824 in IEC 61883-6:2002, 2 bits in LSB of label for Raw Audio
data means Valid Length Code (VBL). Ths value is:
- b00 for 24 bits sample (label is 0x40)
- b01 for 20 bits sample (label is 0x41)
- b10 for 16 bits sample (label is 0x42)

But current firewire-lib apply 24 bits label for both of 16/24 bits samples.

As long as developers investigate BeBoB/Fireworks/OXFW/Dice, all of them
have a behaviour to ignore the label. They can generate correct sound even
if firewire-lib gives wrong label (i.e. 0xff). On BeBoB, this is not only
for Raw Audio data channel, but also for IEC 60958 Conformant data channel.

So there is little possibility of regression.

Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-02 08:46:48 +02:00
Dan Carpenter
33a5f989de ALSA: bebob: sizeof() vs ARRAY_SIZE() typo
ARRAY_SIZE() was intended here instead of sizeof().  The
"bridgeco_freq_table" array holds integers so the original condition is
never true.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-01 18:16:04 +02:00
Rickard Strandqvist
14577c2516 ALSA: synth: emux: soundfont.c: Cleaning up memory leak
There is a risk for memory leak in when something unexpected happens
and the function returns.

This was largely found by using a static code analysis program called cppcheck.

[fixed a typo of kfree() by tiwai]

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-01 14:33:09 +02:00
Takashi Iwai
112cddcada ALSA: firewire: Fix dependency on PCM and rawmidi
Now snd-firewire-lib supports rawmidi in addition to PCM, thus we need
to give a proper dependency.  For fixing and simplification, move the
selections of SND_PCM and SND_RAWMIDI into SND_FIREWIRE_LIB section.
Then each driver doesn't have to select them but only
SND_FIREWIRE_LIB.

Reported-by: Jim Davis <jim.epost@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-30 15:22:06 +02:00
Paul Bolle
66470c973c ALSA: gus: remove checks for CONFIG_SND_DEBUG_ROM
Checks for CONFIG_SND_DEBUG_ROM were added in v2.5.5 but a Kconfig
symbol SND_DEBUG_ROM was never added. These checks have always
evaluated to false. Remove them and the printk()s they hide.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-30 10:12:10 +02:00
Paul Bolle
55d0cc2998 sound: remove checks for CONFIG_BCM_CS4297A_CSWARM
Checks for CONFIG_BCM_CS4297A_CSWARM were added in v2.6.11. The related
Kconfig symbol was never added so these checks always evaluated to true.
Remove them.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-30 10:11:55 +02:00
Hui Wang
532895c58c ALSA: hda - move some alc662 family machines to hda_pin_quirk table
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-29 15:59:43 +02:00
Hui Wang
d91a4c1be0 ALSA: hda - move some alc269 family machines to hda_pin_quirk table
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-29 15:59:35 +02:00
Hui Wang
37df09492c Revert "ALSA: hda - drop def association and sequence from pinconf comparing"
This reverts commit c687200b9d.

Dropping the def association and sequence from pinconf comparing is a
bit risky, It will introduce a greater risk of catching unwanted
machines.

And in addition, so far no BIOS experts give us an explicit answer
whether it makes senses to compare these two fields or not.

For safety reason, we revert this commit.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-29 15:59:28 +02:00
Dan Carpenter
396178370b ALSA: fireworks: small leak on error path
There was a typo here so we return directly instead of freeing "hwinfo".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-29 15:56:18 +02:00
Dan Carpenter
aeebbddda7 ALSA: fireworks: remove some stray checks
We checked "err" earlier.  These things seem to be left over code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-29 15:56:02 +02:00
Benoit Taine
82285f254c ALSA: au1x00: Use resource_size instead of computation
This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/resource_size.cocci

Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-28 17:50:57 +02:00
Takashi Iwai
a58bdba749 Merge branch 'topic/firewire' into for-next
This is a merge of big firewire audio stack updates by Takashi Sakamoto.
2014-05-27 17:38:08 +02:00
Takashi Sakamoto
51fa31d462 ALSA: bebob: Improve comments about stream format
Currently bebob driver apply Raw Audio Data channel (in IEC 61883-1:2002,
Multi Bit Linear Audio Data channel in IEC 61883-6:20005) to IEC 60958
Conformant Data channel because both fireworks and bebob based devices
can handle it by ignoring each label.

This patch improves a comment about this.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:36:24 +02:00
Takashi Sakamoto
7862126a4f ALSA: bebob: Remove meaningless mutex_unlock()
Currently mutex_unlock() is called in module's cleanup function. But after
cleaned up, this mutex is automatically released. So this function call
is meaningless.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:36:11 +02:00
Takashi Sakamoto
9fb01cdb38 ALSA: bebob: Add static specifier to identifier with file scope
Some variables were declared without static even if they're not referred
to from external files. This commit make them local symbols for better
information-hiding by file unit.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:36:01 +02:00
Takashi Sakamoto
791c67b427 ALSA: bebob: Use different names for identifiers in the same file
To suppress 'sparse' warning.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:35:48 +02:00
Takashi Sakamoto
73616c4eec ALSA: fireworks/bebob: Improve indentation
According to coding rule.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:35:38 +02:00
Takashi Sakamoto
9b5f0edfd2 ALSA: fireworks/bebob: Add suffix for long long integer literal
This commit adds suffix to register values of each device, to supress 'sparse'
warnings. Additionally, this commit changes offset values with integer literal.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:35:30 +02:00
Takashi Sakamoto
a6b598bf4b ALSA: fireworks/bebob: Use the same type of variables as function parameters
The second argument of snd_efw_command_get_sampling_rate() means sampling
rate and its type is 'unsigned int'. But 'int' variable is passed as parameter.
It's better to apply the same type for the variable as its argument.

Similally, the type of variable for snd_efw_command_get_clock_source() and
avc_bridgeco_get_plug_type() should be the same type as each argument.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:35:22 +02:00
Takashi Sakamoto
4a286d5528 ALSA: fireworks/bebob: Change type of argument for sampling rate
Originally, I intent to this argument given with 'struct snd_pcm_runtime.rate'
or params_rate(). They return value of 'unsigned int'. So 'unsigned int' is
better for the type of this argument.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:35:13 +02:00
Takashi Sakamoto
93219d0649 ALSA: fireworks: Use the same prototype for functions as actual declaration
There are two modes for Fireworks, IEC 61883 compliant or Windows.
So it's better to use enum type instead of int to express the intension,
even if C language specification defines to handle enum variables as usual
integer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:35:04 +02:00
Takashi Sakamoto
ba06b2cbad ALSA: fireworks: Fix wrong value as argument for PTR_ERR()
The return value of memdup_user() should be passed to return correct error.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:34:52 +02:00
Takashi Sakamoto
51212eea4f ALSA: firewire-lib: Fix sparse warning of incorrect type in assignment
__be32 value should not be assigned directly to bool value.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:34:37 +02:00
Takashi Sakamoto
f9503a68fb ALSA: firewire-lib: Use ARRAY_SIZE() instead of sizeof() for correct loop limit
This commit fixes a big for loop count with array. The limitation of loop
count should be calcurated with the number of elements in the array, not
with the number of bytes.

Aditionally, this commit apply the same declaration as a prototype in header
for the array.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 17:34:27 +02:00
Fabian Frederick
00a6d7b676 ALSA: sound/aoa/codecs/onyx.c: use static const for texts
'texts' is only used as source in strcpy

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 11:58:55 +02:00
Arnd Bergmann
16c2395203 ALSA: hda: fix tegra build
When CONFIG_PM is disabled, the CONFIG_SND_HDA_POWER_SAVE_DEFAULT symbol
does not get defined, which causes a build error for the hda-tegra driver:

hda/hda_tegra.c:80:25: error: 'CONFIG_SND_HDA_POWER_SAVE_DEFAULT' undeclared here (not in a function)
 static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
                         ^
/git/arm-soc/sound/pci/hda/hda_tegra.c:235:13: warning: 'hda_tegra_disable_clocks' defined but not used [-Wunused-function]
 static void hda_tegra_disable_clocks(struct hda_tegra *data)
             ^

This works around the problem by not referencing that macro
when CONFIG_PM is disabled. Instead, we assume that it's disabled
unconditionally and cannot be enabled at runtime.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Dylan Reid <dgreid@chromium.org>
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-27 07:36:18 +02:00
Gabriele Mazzotta
033b0a7ca9 ALSA: hda - Pop noises fix for XPS13 9333
When headphones are plugged in, force AFG and node 0x02
("Headphone Playback Volume") to D0 to avoid pop noises.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=76611
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 17:47:12 +02:00
Takashi Sakamoto
9b1ee0b2cb ALSA: firewire/bebob: Add a workaround for M-Audio special Firewire series
In post commit, a quirk of this firmware about transactions is reported.
This commit apply a workaround for this quirk.

They often fail transactions due to gap_count mismatch. This state is changed
by generating bus reset.

The fw_schedule_bus_reset() is an exported symbol in firewire-core. But there
are no header for public. This commit moves its prototype from
drivers/firewire/core.h to include/linux/firewire.h.

This mismatch still affects bus management before generating this bus reset.
It still takes a time to call driver's probe() because transactions are still
often failed.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:33:10 +02:00
Takashi Sakamoto
a2b2a7798f ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series
Just powering on, these devices below wait to download firmware.
 - Firewire Audiophile
 - Firewire 410
 - Firewire 1814
 - ProjectMix I/O

But firmware version 5058 or later, flash memory in the device stores the
firmware. So this driver can enable these devices by sending a certain cue to
load the firmware.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:32:58 +02:00
Takashi Sakamoto
c495a4a36e ALSA: bebob: Add a quirk of data blocks for MIDI messages for some M-Audio devices
The firmwares for M-Audio Firewire 410/1814 and ProjectMix I/O has a quirk to
ignore MIDI messages in data blocks more than 8. This commit uses a flag which
Fireworks uses for a similar quirk.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:32:46 +02:00
Takashi Sakamoto
9d59124cac ALSA: bebob/firewire-lib: Add a quirk of wrong dbc in empty packet for M-Audio special Firewire series
M-Audio Firewire 1814 has a quirk, ProjectMix I/O also has. They transmit
empty packet with wrong value of dbc incremented by 8 at high sampling rate.
According to IEC 61883-1, this value should be the same as the one in
previous packet.

This commit adds a flag named as CIP_EMPTY_HAS_WRONG_DBC. With flag, the value
of dbc in empty packet is overwittern by an expected value.

This is an example of this quirk:
CIP Header 0	CIP Header 1	Payload size
010D0000	9004F759	210
010D0010	90040B59	210
010D0020	90042359	210
01020028	9004FFFF	2  <-
010D0030	90043759	210
010D0040	90044B59	210
010D0050	90046359	210
01020058	9004FFFF	2  <-
010D0060	90047759	210
010D0070	90048B59	210
010D0080	9004A359	210
01020088	9004FFFF	2  <-
010D0090	9004B759	210
010D00A0	9004CB59	210
010D00B0	9004E359	210
010200B8	9004FFFF	2  <-
010D00C0	9004F759	210
010D00D0	90040B59	210
010D00E0	90042359	210

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:32:33 +02:00
Takashi Sakamoto
3149ac489f ALSA: bebob: Add support for M-Audio special Firewire series
This commit allows this driver to support some models which M-Audio produces
with DM1000 but its firmware is special. They are:
 - Firewire 1814
 - ProjectMix I/O

They have heavily customized firmware. The usual operations can't be applied to
them. For this reason, this commit adds a model specific member to 'struct
snd_bebob' and some model specific functions. Some parameters are write-only so
this commit also adds control interface for applications to set them.

M-Audio special firmware quirks:
 - Just after powering on, they wait to download firmware. This state is
   changed when receiving cue. Then bus reset is generated and the device is
   recognized as a different model with the uploaded firmware.
 - They don't respond against BridgeCo AV/C extension commands. So drivers
   can't get their stream formations and so on.
 - They do not start to transmit packets only by establishing connection but
   also by receiving SIGNAL FORMAT command.
 - After booting up, they often fail to send response against driver's request
   due to mismatch of gap_count.

This module don't support to upload firmware.

Tested-by: Darren Anderson <darrena092@gmail.com> (ProjectMix I/O)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:32:21 +02:00
Takashi Sakamoto
9076c22ddd ALSA: bebob: Add support for M-Audio usual Firewire series
This commit allows this driver to support some models which M-Audio produces
with DM1000/DM1000E with usual firmware. They are:
 - Firewire 410
 - Firewire AudioPhile
 - Firewire Solo
 - Ozonic
 - NRV10
 - FirewireLightBridge

According to a person who worked in BridgeCo, some models are produced with
'Pre-BeBoB'. This means that these products were released before BeBoB was
officially produced, and later BeBoB specification was formed. So these models
have some quirks.

M-Audio usual firmware quirks:
 - Just after powering on, 'Firewire 410' waits to download firmware. This
   state is changed when receiving cue. Then bus reset is generated and the
   device is recognized as a different model with the uploaded firmware.
 - 'Firewire Audiophile' also waits to download firmware but its
   vendor id/model id is the same as the one after loading firmware.
 - The information of channel mapping for MIDI conformant data channel is
   invalid against BridgeCo specification.

This commit adds some codes for these quirks but don't support to upload
firmware.

This commit also adds specific operations to get metering information. The
metering information also includes status of clock synchronization if the model
supports to switch source of clock.

The specification of FirewireLightBridge is unknown. So in this time, normal
operations are applied for this model.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:32:03 +02:00
Takashi Sakamoto
25784ec2d0 ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series
This commit allows this driver to support all of models which Focusrite
produces with DM1000/BeBoB. They are:
 - Saffire
 - Saffire LE
 - SaffirePro 10 I/O
 - SaffirePro 26 I/O

This commit adds Focusrite specific operations:
1. Get source of clock
2. Get/Set sampling frequency
3. Get metering information

The driver uses these functionalities to read/write specific address by async
transaction.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:31:50 +02:00
Takashi Sakamoto
8ac98a3585 ALSA: bebob: Add support for Yamaha GO series
This commit allows this driver to support all of models which Yamaha produced
with DM1000/BeBoB. They are:
 - GO44
 - GO46

This commit adds Yamaha specific operations. To get source of clock, AV/C Audio
Subunit command is used.

I note that their appearances are similar to some models of TerraTec; 'Go44' is
similar to 'PHASE 24 FW' and 'GO46' is similar to 'PHASE X24 FW'. But their
combination of Audio/Music subunits is a bit different.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:31:38 +02:00
Takashi Sakamoto
326b9cacf4 ALSA: bebob: Add support for Terratec PHASE, EWS series and Aureon
This commit allows this driver to support all of models which Terratec produced
with DM1000/BeBoB. They are:
 - PHASE 24 FW
 - PHASE X24 FW
 - PHASE 88 Rack FW
 - EWS MIC2
 - EWS MIC4
 - Aureon 7.1 Firewire

For Phase series, this commit adds a Terratec specific operation. To get source
of clock. AV/C Audio Subunit command is used.

For EWS series and Aureon, this module uses normal operations.

Tested-by: Maximilian Engelhardt <maxi@daemonizer.de> (PHASE 24 FW)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:31:25 +02:00
Takashi Sakamoto
1fc9522a08 ALSA: bebob: Prepare for device specific operations
This commit is for some devices which have its own operations or quirks.

Many functionality should be implemented in user land. Then this commit adds
functionality related to stream such as sampling frequency or clock source. For
help to debug, this commit adds the functionality to get metering information
if it's available.

To help these functionalities, this commit adds some AV/C commands defined in
'AV/C Audio Subunit Specification (1394TA).

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:31:15 +02:00
Takashi Sakamoto
618eabeae7 ALSA: bebob: Add hwdep interface
This interface is designed for mixer/control application. By using hwdep
interface, the application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:31:03 +02:00
Takashi Sakamoto
fbbebd2c40 ALSA: bebob: Add PCM interface
This commit adds a functionality to capture/playback PCM samples.

When AMDTP stream is already running for PCM or the source of clock is not
internal, available sampling rate is limited at current one.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:30:46 +02:00
Takashi Sakamoto
248b78027d ALSA: bebob: Add MIDI interface
This commit adds a functionality to capture/playback MIDI messages.

When no AMDTP streams are running, this module starts AMDTP stream at current
sampling rate for MIDI substream.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:30:16 +02:00
Takashi Sakamoto
ad9697bad7 ALSA: bebob: Add proc interface for debugging purpose
This commit adds proc interface to get these information for debugging:
 - firmware information
 - stream formation
 - current clock source and sampling rate

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:30:00 +02:00
Takashi Sakamoto
b6bc812327 ALSA: bebob/firewire-lib: Add a quirk for discontinuity at bus reset
Normal BeBoB firmware has a quirk. When receiving bus reset, it transmits
packets with discontinuous value in dbc field.

This causes two situation, one is to abort streaming by firewire-lib as a
result of detecting the discontinuity. Another is to call driver's .update()
because of bus reset. These two is generated independently. (The former
depends on isochronous stream and the latter depends on IEEE1394 bus driver.)

When BeBoB driver works with XRUN-recoverable applications, this situation
looks like stream_start_duplex() call followed by stream_update_duplex() call
because applications will call snd_pcm_prepare() immediately at XRUN.

To update connections and streams at first, this commit use completion. When
queueing error occurs, stream_start_duplex() is forced to wait maximum
1000msec. During this, when .update() is called, the completion is waken and
stream_start_duplex() is processed without breaking connections.

At bus reset, stream_start_duplex() shouldn't break/establish connections and
stream_update_duplex() should update connections because a caller of
fw_iso_resources_allocate() is responsible for calling
fw_iso_resources_update() on bus reset.

This commit also adds a flag, which has an effect to skip checking continuity
for first packet. This flag is useful for BeBoB quirk to start handling packets
during streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:29:44 +02:00
Takashi Sakamoto
eb7b3a056c ALSA: bebob: Add commands and connections/streams management
This commit adds management functionality for connections and streams.
BeBoB uses CMP to manage connections and uses AMDTP for streams.

This commit also adds some BridgeCo's AV/C extension commands. There are some
BridgeCo's AV/C extension commands but this commit just uses below commands
to get device's capability and status:

 1.Extended Plug Info commands
  - Plug Channel Position Specific Data
  - Plug Type Specific Data
  - Cluster(Section) Info Specific Data
  - Plug Input Specific Data
 2.Extended Stream Format Information commands
  - Extended Stream Format Information Command - List Request

For Extended Plug Info commands for Cluster Info Specific Data, I pick up
'section' instead of 'cluster' from document to prevent from misunderstanding
because 'cluster' is also used in IEC 61883-6.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:29:29 +02:00
Takashi Sakamoto
fd6f4b0dc1 ALSA: bebob: Add skelton for BeBoB based devices
This commit adds a new driver for BeBoB based devices with no specific
operations. Currently this driver just create/remove card instance according
to callbacks.

BeBoB is 'BridgeCo enhanced Breakout Box'. This is installed to firewire
devices with DM1000/DM1100/DM1500 chipset. It gives common way for host
system to handle BeBoB based devices.

Current supported devices:
 - Edirol FA-66/FA-101
 - PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
 - BridgeCo RDAudio1/Audio5
 - Mackie Onyx 1220/1620/1640 (Firewire I/O Card)
 - Mackie d.2 (Firewire Option)
 - Stanton FinalScratch 2 (ScratchAmp)
 - Tascam IF-FW DM
 - Behringer XENIX UFX 1204/1604
 - Behringer Digital Mixer X32 series (X-UF Card)
 - Apogee Rosetta 200/Rosetta 400 (X-FireWire card)
 - Apogee DA-16X/AD-16X/DD-16X (X-FireWire card)
 - Apogee Ensemble
 - ESI Quotafire610
 - AcousticReality eARMasterOne
 - CME MatrixKFW
 - Phonix Helix Board 12 MkII/18 MkII/24 MkII
 - Phonic Helix Board 12 Universal/18 Universal/24 Universal
 - Lynx Aurora 8/16 (LT-FW)
 - ICON FireXon
 - PrismSound Orpheus/ADA-8XR

Devices possible to be supported if identifying IDs:
 - Apogee Mini-Me Firewire/Mini-DAC Firewire
 - Behringer F-Control Audio 610/1616
 - Cakewalk Sonar Power Studio 66
 - CME UF400e
 - ESI Quotafire XL
 - Infrasonic DewX/Windy6
 - Mackie Digital X Bus x.200/400
 - Phonic Helix Board 12/18/24
 - Phonic FireFly 202/302
 - Rolf Spuler Firewire Guitar

Tested-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:29:12 +02:00
Takashi Sakamoto
555e8a8f7f ALSA: fireworks: Add command/response functionality into hwdep interface
This commit adds two functionality for hwdep interface, adds two parameters for
this driver, add a node for proc interface.

To receive responses from devices, this driver already allocate own callback
into initial memory space in host controller. This means no one can allocate
its own callback to the address. So this driver must give a way for user
applications to receive responses.

This commit adds a functionality to receive responses via hwdep interface. The
application can receive responses to read from this interface. To achieve this,
this commit adds a buffer to queue responses. The default size of this buffer is
1024 bytes. This size can be changed to give preferrable size to
'resp_buf_size' parameter for this driver. The application should notice rest
of space in this buffer because this driver don't push responses when this
buffer has no space.

Additionaly, this commit adds a functionality to transmit commands via hwdep
interface. The application can transmit commands to write into this interface.
I note that the application can transmit one command at once, but can receive
as many responses as possible untill the user-buffer is full.

When using these interfaces, the application must keep maximum number of
sequence number in command within the number in firewire.h because this driver
uses this number to distinguish the response is against the command by the
application or this driver.

Usually responses against commands which the application transmits are pushed
into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all
responses are pushed into the buffer. When using this mode, I reccomend to
expand the size of buffer.

Finally this commit adds a new node into proc interface to output status of the
buffer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:28:58 +02:00
Takashi Sakamoto
594ddced82 ALSA: fireworks: Add hwdep interface
This interface is designed for mixer/control application. To use hwdep
interface, the application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:28:41 +02:00
Takashi Sakamoto
aa02bb6e60 ALSA: fireworks: Add PCM interface
This commit adds a functionality to capture/playback PCM samples.

When AMDTP stream is already running for PCM or the source of clock is not
internal, available sampling rate is limited at current one.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:28:27 +02:00
Takashi Sakamoto
53111cdc53 ALSA: fireworks/firewire-lib: Add a quirk of data blocks for MIDI in out-stream
Fireworks has a quirk to ignore MIDI messages in data blocks more than 8.
This commit adds a flag for this quirk and codes to skip 8 or more data
blocks to transfer MIDI messages.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:28:14 +02:00
Takashi Sakamoto
a63d3ff105 ALSA: fireworks: Add MIDI interface
This commit adds a functionality to capture/playback MIDI messages.

When no AMDTP streams are running, this driver starts AMDTP stream for MIDI
stream at current sampling rate.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-26 14:28:01 +02:00