Allocating PDA and GDT at boot is a pain. Using simple per-cpu variables adds
happiness (although we need the GDT page-aligned for Xen, which we do in a
followup patch).
[akpm@linux-foundation.org: build fix]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Because the command line is increased to 2048 characters after 2.6.21, it's
not possible for boot loaders and userspace tools to determine the length
of the command line the kernel can understand. The benefit of knowing the
length is that users can be warned if the command line size is too long
which prevents surprise if things don't work after bootup.
This patch updates the boot protocol to contain a field called
"cmdline_size" that contain the length of the command line (excluding the
terminating zero).
The patch also adds missing fields (of protocol version 2.05) to the x86_64
setup code.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The specific case I am encountering is kdump under Xen with a 64 bit
hypervisor and 32 bit kernel/userspace. The dump created is 64 bit due to
the hypervisor but the dump kernel is 32 bit for maximum compatibility.
It's possibly less likely to be useful in a purely native scenario but I
see no reason to disallow it.
[akpm@linux-foundation.org: build fix]
Signed-off-by: Ian Campbell <ian.campbell@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Horms <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
GCC (4.1 at least) unrolls it anyway, but I can't believe this code
was ever justifiable. (I've also submitted a patch which cleans up
i386, which is even uglier).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Whenever we schedule, __switch_to calls load_esp0 which does:
tss->esp0 = thread->esp0;
This is never initialized for the initial thread (ie "swapper"), so when we're
scheduling that, we end up setting esp0 to 0. This is fine: the swapper never
leaves ring 0, so this field is never used.
lguest, however, gets upset that we're trying to used an unmapped page as our
kernel stack. Rather than work around it there, let's initialize it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The lguest patches somehow managed to trigger this:
In file included from arch/i386/lguest/lguest.c:38:
include/asm/asm-offsets.h:67:1: warning: "VDSO_PRELINK" redefined
In file included from include/linux/elf.h:7,
from include/linux/module.h:15,
from include/linux/device.h:21,
from include/linux/interrupt.h:15,
from arch/i386/lguest/lguest.c:27:
include/asm/elf.h:140:1: warning: this is the location of the previous definition
I assume that using the same identifier twice was a bad idea..
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Create a document to explain how to use numa=fake in conjunction with cpusets
for coarse memory resource management.
An attempt to get more awareness and testing for this feature.
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
remove the reporting of the constant_tsc flag from the "power management"
field in /proc/cpuinfo. The NULL value there was replaced by "" because
the former would result in a printout of [8] if the flag is set.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Extends the numa=fake x86_64 command-line option to split the remaining system
memory into nodes of fixed size. Any leftover memory is allocated to a final
node unless the command-line ends with a comma.
For example:
numa=fake=2*512,*128 gives two 512M nodes and the remaining system
memory is split into nodes of 128M each.
This is beneficial for systems where the exact size of RAM is unknown or not
necessarily relevant, but the size of the remaining nodes to be allocated is
known based on their capacity for resource management.
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extends the numa=fake x86_64 command-line option to split the remaining
system memory into equal-sized nodes.
For example:
numa=fake=2*512,4* gives two 512M nodes and the remaining system
memory is split into four approximately equal
chunks.
This is beneficial for systems where the exact size of RAM is unknown or not
necessarily relevant, but the granularity with which nodes shall be allocated
is known.
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extends the numa=fake x86_64 command-line option to allow for configurable
node sizes. These nodes can be used in conjunction with cpusets for coarse
memory resource management.
The old command-line option is still supported:
numa=fake=32 gives 32 fake NUMA nodes, ignoring the NUMA setup of the
actual machine.
But now you may configure your system for the node sizes of your choice:
numa=fake=2*512,1024,2*256
gives two 512M nodes, one 1024M node, two 256M nodes, and
the rest of system memory to a sixth node.
The existing hash function is maintained to support the various node sizes
that are possible with this implementation.
Each node of the same size receives roughly the same amount of available
pages, regardless of any reserved memory with its address range. The total
available pages on the system is calculated and divided by the number of equal
nodes to allocate. These nodes are then dynamically allocated and their
borders extended until such time as their number of available pages reaches
the required size.
Configurable node sizes are recommended when used in conjunction with cpusets
for memory control because it eliminates the overhead associated with scanning
the zonelists of many smaller full nodes on page_alloc().
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix comments to represent the true number of quadwords in GDT.
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch makes the needlessly global vmi_pmd_clear() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change mark_tsc_unstable() so it takes a string argument, which holds the
reason the TSC was marked unstable.
This is then displayed the first time mark_tsc_unstable is called.
This should help us better debug why the TSC was marked unstable on certain
systems and allow us to make sure we're not being overly paranoid when
throwing out this troublesome clocksource.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Work around a warning with -Wmissing-prototypes in
arch/i386/kernel/asm-offsets.c
The warning isn't gcc's fault - asm-offsets.c is simply a special file.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
clean up unneeded type cast by properly declare data type.
Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
o Modpost generates warnings for i386 if compiled with CONFIG_RELOCATABLE=y
WARNING: vmlinux - Section mismatch: reference to .init.text:find_unisys_acpi_oem_table from .text between 'acpi_madt_oem_check' (at offset 0xc0101eda) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:acpi_get_table_header_early from .text between 'acpi_madt_oem_check' (at offset 0xc0101ef0) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'acpi_madt_oem_check' (at offset 0xc0101f2e) and 'enable_apic_mode'
WARNING: vmlinux - Section mismatch: reference to .init.text:setup_unisys from .text between 'acpi_madt_oem_check' (at offset 0xc0101f37) and 'enable_apic_mode'WARNING: vmlinux - Section mismatch: reference to .init.text:parse_unisys_oem from .text between 'mps_oem_check' (at offset 0xc0101ec7) and 'acpi_madt_oem_check'
WARNING: vmlinux - Section mismatch: reference to .init.text:es7000_sw_apic from .text between 'enable_apic_mode' (at offset 0xc0101f48) and 'check_apicid_present'
o Some functions which are inline (acpi_madt_oem_check) are not inlined by
compiler as these functions are accessed using function pointer. These
functions are put in .text section and they in-turn access __init type
functions hence modpost generates warnings.
o Do not iniline acpi_madt_oem_check, instead make it __init.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enable system hashtable memory to be distributed among nodes on x86_64 NUMA
Forcing the kernel to use node interleaved vmalloc instead of bootmem for
the system hashtable memory (alloc_large_system_hash) reduces the memory
imbalance on node 0 by around 40MB on a 8 node x86_64 NUMA box:
Before the following patch, on bootup of a 8 node box:
Node 0 MemTotal: 3407488 kB
Node 0 MemFree: 3206296 kB
Node 0 MemUsed: 201192 kB
Node 0 Active: 7012 kB
Node 0 Inactive: 512 kB
Node 0 Dirty: 0 kB
Node 0 Writeback: 0 kB
Node 0 FilePages: 1912 kB
Node 0 Mapped: 420 kB
Node 0 AnonPages: 5612 kB
Node 0 PageTables: 468 kB
Node 0 NFS_Unstable: 0 kB
Node 0 Bounce: 0 kB
Node 0 Slab: 5408 kB
Node 0 SReclaimable: 644 kB
Node 0 SUnreclaim: 4764 kB
After the patch (or using hashdist=1 on the kernel command line):
Node 0 MemTotal: 3407488 kB
Node 0 MemFree: 3247608 kB
Node 0 MemUsed: 159880 kB
Node 0 Active: 3012 kB
Node 0 Inactive: 616 kB
Node 0 Dirty: 0 kB
Node 0 Writeback: 0 kB
Node 0 FilePages: 2424 kB
Node 0 Mapped: 380 kB
Node 0 AnonPages: 1200 kB
Node 0 PageTables: 396 kB
Node 0 NFS_Unstable: 0 kB
Node 0 Bounce: 0 kB
Node 0 Slab: 6304 kB
Node 0 SReclaimable: 1596 kB
Node 0 SUnreclaim: 4708 kB
I guess it is a good idea to keep HASHDIST_DEFAULT "on" for x86_64 NUMA
since x86_64 has no dearth of vmalloc space? Or maybe enable hash
distribution for all 64bit NUMA arches? The following patch does it only
for x86_64.
I ran a HPC MPI benchmark -- 'Ansys wingsolid', which takes up quite a bit of
memory and uses up tlb entries. This was on a 4 way, 2 socket
Tyan AMD box (non vsmp), with 8G total memory (4G pernode).
The results with and without hash distribution are:
1. Vanilla - runtime of 1188.000s
2. With hashdist=1 runtime of 1154.000s
Oprofile output for the duration of run is:
1. Vanilla:
PU: AMD64 processors, speed 2411.16 MHz (estimated)
Counted L1_AND_L2_DTLB_MISSES events (L1 and L2 DTLB misses) with a unit
mask of 0x00 (No unit mask) count 500
samples % app name symbol name
163054 6.5513 libansys1.so MultiFront::decompose(int, int,
Elemset *, int *, int, int, int)
162061 6.5114 libansys3.so blockSaxpy6L_fd
162042 6.5107 libansys3.so blockInnerProduct6L_fd
156286 6.2794 libansys3.so maxb33_
87879 3.5309 libansys1.so elmatrixmultpcg_
84857 3.4095 libansys4.so saxpy_pcg
58637 2.3560 libansys4.so .st4560
46612 1.8728 libansys4.so .st4282
43043 1.7294 vmlinux-t copy_user_generic_string
41326 1.6604 libansys3.so blockSaxpyBackSolve6L_fd
41288 1.6589 libansys3.so blockInnerProductBackSolve6L_fd
2. With hashdist=1
CPU: AMD64 processors, speed 2411.13 MHz (estimated)
Counted L1_AND_L2_DTLB_MISSES events (L1 and L2 DTLB misses) with a unit
mask of 0x00 (No unit mask) count 500
samples % app name symbol name
162993 6.9814 libansys1.so MultiFront::decompose(int, int,
Elemset *, int *, int, int, int)
160799 6.8874 libansys3.so blockInnerProduct6L_fd
160459 6.8729 libansys3.so blockSaxpy6L_fd
156018 6.6826 libansys3.so maxb33_
84700 3.6279 libansys4.so saxpy_pcg
83434 3.5737 libansys1.so elmatrixmultpcg_
58074 2.4875 libansys4.so .st4560
46000 1.9703 libansys4.so .st4282
41166 1.7632 libansys3.so blockSaxpyBackSolve6L_fd
41033 1.7575 libansys3.so blockInnerProductBackSolve6L_fd
35762 1.5318 libansys1.so inner_product_sub
35591 1.5245 libansys1.so inner_product_sub2
28259 1.2104 libansys4.so addVectors
Signed-off-by: Pravin B. Shelar <pravin.shelar@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Christoph Lameter <clameter@engr.sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When compiling with -Os (which is default) the compiler defaults to it
anyways. And with -O2 it probably generates somewhat better (although
also larger) code.
Signed-off-by: Andi Kleen <ak@suse.de>
Fix for the following patch. Provide dummy cpufreq functions when
CPUFREQ is not compiled in.
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
o This patch moves the code to verify long mode and SSE to a common file.
This code is now shared by trampoline.S, wakeup.S, boot/setup.S and
boot/compressed/head.S
o So far we used to do very limited check in trampoline.S, wakeup.S and
in 32bit entry point. Now all the entry paths are forced to do the
exhaustive check, including SSE because verify_cpu is shared.
o I am keeping this patch as last in the x86 relocatable series because
previous patches have got quite some amount of testing done and don't want
to distrub that. So that if there is problem introduced by this patch, at
least it can be easily isolated.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
o Extend the bzImage protocol (same as i386) to allow bzImage loaders to
load the protected mode kernel at non-1MB address. Now protected mode
component is relocatable and can be loaded at non-1MB addresses.
o As of today kdump uses it to run a second kernel from a reserved memory
area.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
o X86_64 kernel should run from 2MB aligned address for two reasons.
- Performance.
- For relocatable kernels, page tables are updated based on difference
between compile time address and load time physical address.
This difference should be multiple of 2MB as kernel text and data
is mapped using 2MB pages and PMD should be pointing to a 2MB
aligned address. Life is simpler if both compile time and load time
kernel addresses are 2MB aligned.
o Flag the error at compile time if one is trying to build a kernel which
does not meet alignment restrictions.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch modifies the x86_64 kernel so that it can be loaded and run
at any 2M aligned address, below 512G. The technique used is to
compile the decompressor with -fPIC and modify it so the decompressor
is fully relocatable. For the main kernel the page tables are
modified so the kernel remains at the same virtual address. In
addition a variable phys_base is kept that holds the physical address
the kernel is loaded at. __pa_symbol is modified to add that when
we take the address of a kernel symbol.
When loaded with a normal bootloader the decompressor will decompress
the kernel to 2M and it will run there. This both ensures the
relocation code is always working, and makes it easier to use 2M
pages for the kernel and the cpu.
AK: changed to not make RELOCATABLE default in Kconfig
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Currently __pa_symbol is for use with symbols in the kernel address
map and __pa is for use with pointers into the physical memory map.
But the code is implemented so you can usually interchange the two.
__pa which is much more common can be implemented much more cheaply
if it is it doesn't have to worry about any other kernel address
spaces. This is especially true with a relocatable kernel as
__pa_symbol needs to peform an extra variable read to resolve
the address.
There is a third macro that is added for the vsyscall data
__pa_vsymbol for finding the physical addesses of vsyscall pages.
Most of this patch is simply sorting through the references to
__pa or __pa_symbol and using the proper one. A little of
it is continuing to use a physical address when we have it
instead of recalculating it several times.
swapper_pgd is now NULL. leave_mm now uses init_mm.pgd
and init_mm.pgd is initialized at boot (instead of compile time)
to the physmem virtual mapping of init_level4_pgd. The
physical address changed.
Except for the for EMPTY_ZERO page all of the remaining references
to __pa_symbol appear to be during kernel initialization. So this
should reduce the cost of __pa in the common case, even on a relocated
kernel.
As this is technically a semantic change we need to be on the lookout
for anything I missed. But it works for me (tm).
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
o virt_to_page() call should be used on kernel linear addresses and not
on kernel text and data addresses. Swsusp code uses it on kernel data
(statically allocated swsusp_header).
o Allocate swsusp_header dynamically so that virt_to_page() can be used
safely.
o I am changing this because in next few patches, __pa() on x86_64 will
no longer support kernel text and data addresses and hibernation breaks.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
o __pa() should be used only on kernel linearly mapped virtual addresses
and not on kernel text and data addresses.
o Hibernation code needs to determine the physical address associated
with kernel symbol to mark a section boundary which contains pages which
don't have to be saved and restored during hibernate/resume operation.
o Move this piece of code in arch dependent section. So that architectures
which don't have kernel text/data mapped into kernel linearly mapped
region can come up with their own ways of determining physical addresses
associated with a kernel text.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
With the rewrite of the SMP trampoline and the early page
allocator there is nothing that needs identity mapped pages,
once we start executing C code.
So add zap_identity_mappings into head64.c and remove
zap_low_mappings() from much later in the code. The functions
are subtly different thus the name change.
This also kills boot_level4_pgt which was from an earlier
attempt to move the identity mappings as early as possible,
and is now no longer needed. Essentially I have replaced
boot_level4_pgt with trampoline_level4_pgt in trampoline.S
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
o Moved wakeup_level4_pgt into the wakeup routine so we can
run the kernel above 4G.
o Now we first go to 64bit mode and continue to run from trampoline and
then then start accessing kernel symbols and restore processor context.
This enables us to resume even in relocatable kernel context when
kernel might not be loaded at physical addr it has been compiled for.
o Removed the need for modifying any existing kernel page table.
o Increased the size of the wakeup routine to 8K. This is required as
wake page tables are on trampoline itself and they got to be at 4K
boundary, hence one page is not sufficient.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
o Various cleanups. One of the main purpose of cleanups is that make
wakeup.S as close as possible to trampoline.S.
o Following are the changes
- Indentations for comments.
- Changed the gdt table to compact form and to resemble the
one in trampoline.S
- Take the jump to 32bit from real mode using ljmpl. Makes code
more readable.
- After enabling long mode, directly take a long jump for 64bit
mode. No need to take an extra jump to "reach_comaptibility_mode"
- Stack is not used after real mode. So don't load stack in
32 bit mode.
- No need to enable PGE here.
- No need to do extra EFER read, anyway we trash the read contents.
- No need to enable system call (EFER_SCE). Anyway it will be
enabled when original EFER is restored.
- No need to set MP, ET, NE, WP, AM bits in cr0. Very soon we will
reload the original cr0 while restroing the processor state.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
o Use appropriate names for 64bit regsiters.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
o Get rid of dead code in wakeup.S
o We never restore from saved_gdt, saved_idt, saved_ltd, saved_tss, saved_cr3,
saved_cr4, saved_cr0, real_save_gdt, saved_efer, saved_efer2. Get rid
of of associated code.
o Get rid of bogus_magic, bogus_31_magic and bogus_magic2. No longer being
used.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
This modifies the SMP trampoline and all of the associated code so
it can jump to a 64bit kernel loaded at an arbitrary address.
The dependencies on having an idenetity mapped page in the kernel
page tables for SMP bootup have all been removed.
In addition the trampoline has been modified to verify
that long mode is supported. Asking if long mode is implemented is
down right silly but we have traditionally had some of these checks,
and they can't hurt anything. So when the totally ludicrous happens
we just might handle it correctly.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
EFER varies like %cr4 depending on the cpu capabilities, and which cpu
capabilities we want to make use of. So save/restore it make certain
we have the same EFER value when we are done.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Move __KERNEL32_CS up into the unused gdt entry. __KERNEL32_CS is
used when entering the kernel so putting it first is useful when
trying to keep boot gdt sizes to a minimum.
Set the accessed bit on all gdt entries. We don't care
so there is no need for the cpu to burn the extra cycles,
and it potentially allows the pages to be immutable. Plus
it is confusing when debugging and your gdt entries mysteriously
change.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Use virtual addresses instead of physical addresses
in copy bootdata. In addition fix the implementation
of the old bootloader convention. Everything is
at real_mode_data always. It is just that sometimes
real_mode_data was relocated by setup.S to not sit at
0x90000.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
- Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge
is broken as soon as mm/init.c:init_memory_mapping is run.
- As physmem_pgt is gone don't export it in pgtable.h.
- Use defines from pgtable.h for page permissions.
- Fix the physical memory identity mapping so it is at the correct
address.
- Remove the physical memory mapping from wakeup_level4_pgt it
is at the wrong address so we can't possibly be usinging it.
- Simply NEXT_PAGE the work to calculate the phys_ alias
of the labels was very cool. Unfortuantely it was a brittle
special purpose hack that makes maitenance more difficult.
Instead just use label - __START_KERNEL_map like we do
everywhere else in assembly.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Early in the boot process we need the ability to set
up temporary mappings, before our normal mechanisms are
initialized. Currently this is used to map pages that
are part of the page tables we are building and pages
during the dmi scan.
The core problem is that we are using the user portion of
the page tables to implement this. Which means that while
this mechanism is active we cannot catch NULL pointer dereferences
and we deviate from the normal ways of handling things.
In this patch I modify early_ioremap to map pages into
the kernel portion of address space, roughly where
we will later put modules, and I make the discovery of
which addresses we can use dynamic which removes all
kinds of static limits and remove the dependencies
on implementation details between different parts of the code.
Now alloc_low_page() and unmap_low_page() use
early_iomap() and early_iounmap() to allocate/map and
unmap a page.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
This patch makes pgtable.h and page.h safe to include
in assembly files like head.S. Allowing us to use
symbolic constants instead of hard coded numbers when
refering to the page tables.
This patch copies asm-sparc64/const.h to asm-x86_64 to
get a definition of _AC() a very convinient macro that
allows us to force the type when we are compiling the
code in C and to drop all of the type information when
we are using the constant in assembly. Previously this
was done with multiple definition of the same constant.
const.h was modified slightly so that it works when given
CONFIG options as arguments.
This patch adds #ifndef __ASSEMBLY__ ... #endif
and _AC(1,UL) where appropriate so the assembler won't
choke on the header files. Otherwise nothing
should have changed.
AK: added const.h to exported headers to fix headers_check
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
The dma_ops structure can be const since it never changes
after boot.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
smp_call_function and smp_call_function_single are almost complete
duplicates of the same logic. This patch combines them by
implementing them in terms of the more general
smp_call_function_mask().
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Stephane Eranian <eranian@hpl.hp.com>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andi Kleen <ak@suse.de>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Ingo Molnar <mingo@elte.hu>
