Commit graph

1788 commits

Author SHA1 Message Date
Ingo Molnar
c3305257cd perf stat: Add more cache-miss percentage printouts
Print out the cache-miss percentage as well if the cache refs were
collected, for all the generic cache event types.

Before:

   11,103,723,230 dTLB-loads                #  622.471 M/sec                    ( +-  0.30% )
       87,065,337 dTLB-load-misses          #    4.881 M/sec                    ( +-  0.90% )

After:

   11,353,713,242 dTLB-loads                #  626.020 M/sec                    ( +-  0.35% )
      113,393,472 dTLB-load-misses          #    1.00% of all dTLB cache hits   ( +-  0.49% )

Also ASCII color highlight too high percentages, them when it's executed on the console.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-lkhwxsevdbd9a8nymx0vxc3y@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-19 14:30:50 +02:00
Ingo Molnar
2cba3ffb9a perf stat: Add -d -d and -d -d -d options to show more CPU events
Print even more detailed statistics if requested via perf stat -d:

       -d:          detailed events, L1 and LLC data cache
    -d -d:     more detailed events, dTLB and iTLB events
 -d -d -d:     very detailed events, adding prefetch events

Full output looks like this now:

 Performance counter stats for '/home/mingo/hackbench 10' (5 runs):

       1703.674707 task-clock                #    8.709 CPUs utilized            ( +-  4.19% )
            49,068 context-switches          #    0.029 M/sec                    ( +- 16.66% )
             8,303 CPU-migrations            #    0.005 M/sec                    ( +- 24.90% )
            17,397 page-faults               #    0.010 M/sec                    ( +-  0.46% )
     2,345,389,239 cycles                    #    1.377 GHz                      ( +-  4.61% ) [55.90%]
     1,884,503,527 stalled-cycles-frontend   #   80.35% frontend cycles idle     ( +-  5.67% ) [50.39%]
       743,919,737 stalled-cycles-backend    #   31.72% backend  cycles idle     ( +-  8.75% ) [49.91%]
     1,314,416,379 instructions              #    0.56  insns per cycle
                                             #    1.43  stalled cycles per insn  ( +-  2.53% ) [60.87%]
       272,592,567 branches                  #  160.003 M/sec                    ( +-  1.74% ) [56.56%]
         3,794,846 branch-misses             #    1.39% of all branches          ( +-  6.59% ) [58.50%]
       449,982,778 L1-dcache-loads           #  264.125 M/sec                    ( +-  2.47% ) [49.88%]
        22,404,961 L1-dcache-load-misses     #    4.98% of all L1-dcache hits    ( +-  6.08% ) [55.05%]
         6,204,750 LLC-loads                 #    3.642 M/sec                    ( +-  8.91% ) [43.75%]
         1,837,411 LLC-load-misses           #    1.078 M/sec                    ( +-  7.27% ) [12.07%]
       411,440,421 L1-icache-loads           #  241.502 M/sec                    ( +-  5.60% ) [36.52%]
        27,556,832 L1-icache-load-misses     #   16.175 M/sec                    ( +-  7.46% ) [46.72%]
       464,067,627 dTLB-loads                #  272.392 M/sec                    ( +-  4.46% ) [54.17%]
        10,765,648 dTLB-load-misses          #    6.319 M/sec                    ( +-  3.18% ) [48.68%]
     1,273,080,386 iTLB-loads                #  747.256 M/sec                    ( +-  3.38% ) [47.53%]
           117,481 iTLB-load-misses          #    0.069 M/sec                    ( +- 14.99% ) [47.01%]
         4,590,653 L1-dcache-prefetches      #    2.695 M/sec                    ( +-  4.49% ) [46.19%]
         1,712,660 L1-dcache-prefetch-misses #    1.005 M/sec                    ( +-  3.75% ) [44.82%]

        0.195622057  seconds time elapsed  ( +-  6.84% )

Also clean up the attribute construction code to be appending, and factor
it out into add_default_attributes().

Tweak the coverage percentage printout a bit, so that it's easier to view it
alongside the +- sttddev colum.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-to3kgu04449s64062val8b62@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-19 14:29:51 +02:00
Ingo Molnar
b313207286 perf bench, x86: Add alternatives-asm.h wrapper
perf bench needs this to build the kernel's memcpy routine:

In file included from bench/mem-memcpy-x86-64-asm.S:2:0:
bench/../../../arch/x86/lib/memcpy_64.S:7:33: fatal error: asm/alternative-asm.h: No such file or directory

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-c5d41xibgullk8h2280q4gv0@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-18 21:00:44 +02:00
Stephane Eranian
94692349c4 perf: Fix multi-event parsing bug
This patch fixes an issue with event parsing.
The following commit appears to have broken the
ability to specify a comma separated list of events:

   commit ceb53fbf6d
   Author: Ingo Molnar <mingo@elte.hu>
   Date:   Wed Apr 27 04:06:33 2011 +0200

       perf stat: Fail more clearly when an invalid modifier is specified

This patch fixes this while preserving the desired effect:

$ perf stat -e instructions:u,instructions:k ls /dev/null /dev/null

 Performance counter stats for 'ls /dev/null':

            365956 instructions:u           #    0.00  insns per cycle
            731806 instructions:k           #    0.00  insns per cycle

        0.001108862  seconds time elapsed

$ perf stat -e task-clock-msecs true
invalid event modifier: '-msecs'
Run 'perf list' for a list of valid events and modifiers

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: acme@redhat.com
Cc: peterz@infradead.org
Cc: fweisbec@gmail.com
Link: http://lkml.kernel.org/r/20110517133619.GA6999@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-17 20:45:36 +02:00
Ingo Molnar
52004ea7ca Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent 2011-05-15 19:41:00 +02:00
Arnaldo Carvalho de Melo
aece948f5d perf evlist: Fix per thread mmap setup
The PERF_EVENT_IOC_SET_OUTPUT ioctl was returning -EINVAL when using
--pid when monitoring multithreaded apps, as we can only share a ring
buffer for events on the same thread if not doing per cpu.

Fix it by using per thread ring buffers.

Tested with:

[root@felicio ~]# tuna -t 26131 -CP | nl
  1                      thread       ctxt_switches
  2    pid SCHED_ rtpri affinity voluntary nonvoluntary             cmd
  3 26131   OTHER     0      0,1  10814276      2397830 chromium-browse
  4  642    OTHER     0      0,1     14688            0 chromium-browse
  5  26148  OTHER     0      0,1    713602       115479 chromium-browse
  6  26149  OTHER     0      0,1    801958         2262 chromium-browse
  7  26150  OTHER     0      0,1   1271128          248 chromium-browse
  8  26151  OTHER     0      0,1         3            0 chromium-browse
  9  27049  OTHER     0      0,1     36796            9 chromium-browse
 10  618    OTHER     0      0,1     14711            0 chromium-browse
 11  661    OTHER     0      0,1     14593            0 chromium-browse
 12  29048  OTHER     0      0,1     28125            0 chromium-browse
 13  26143  OTHER     0      0,1   2202789          781 chromium-browse
[root@felicio ~]#

So 11 threads under pid 26131, then:

[root@felicio ~]# perf record -F 50000 --pid 26131

[root@felicio ~]# grep perf_event /proc/`pidof perf`/maps | nl
  1 7fa4a2538000-7fa4a25b9000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
  2 7fa4a25b9000-7fa4a263a000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
  3 7fa4a263a000-7fa4a26bb000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
  4 7fa4a26bb000-7fa4a273c000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
  5 7fa4a273c000-7fa4a27bd000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
  6 7fa4a27bd000-7fa4a283e000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
  7 7fa4a283e000-7fa4a28bf000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
  8 7fa4a28bf000-7fa4a2940000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
  9 7fa4a2940000-7fa4a29c1000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
 10 7fa4a29c1000-7fa4a2a42000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
 11 7fa4a2a42000-7fa4a2ac3000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
[root@felicio ~]#

11 mmaps, one per thread since we didn't specify any CPU list, so we need one
mmap per thread and:

[root@felicio ~]# perf record -F 50000 --pid 26131
^M
^C[ perf record: Woken up 79 times to write data ]
[ perf record: Captured and wrote 20.614 MB perf.data (~900639 samples) ]

[root@felicio ~]# perf report -D | grep PERF_RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort -n | uniq -c | sort -nr | nl
     1	 371310 26131
     2	  96516 26148
     3	  95694 26149
     4	  95203 26150
     5	   7291 26143
     6	     87 27049
     7	     76 661
     8	     60 29048
     9	     47 618
    10	     43 642
[root@felicio ~]#

Ok, one of the threads, 26151 was quiescent, so no samples there, but all the
others are there.

Then, if I specify one CPU:

[root@felicio ~]# perf record -F 50000 --pid 26131 --cpu 1
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.680 MB perf.data (~29730 samples) ]

[root@felicio ~]# perf report -D | grep PERF_RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort -n | uniq -c | sort -nr | nl
     1	   8444 26131
     2	   2584 26149
     3	   2518 26148
     4	   2324 26150
     5	    123 26143
     6	      9 661
     7	      9 29048
[root@felicio ~]#

This machine has two cores, so fewer threads appeared on the radar, and:

[root@felicio ~]# grep perf_event /proc/`pidof perf`/maps | nl
 1 7f484b922000-7f484b9a3000 rwxs 00000000 00:09 4064 anon_inode:[perf_event]
[root@felicio ~]#

Just one mmap, as now we can use just one per-cpu buffer instead of the
per-thread needed in the previous case.

For global profiling:

[root@felicio ~]# perf record -F 50000 -a
^C[ perf record: Woken up 26 times to write data ]
[ perf record: Captured and wrote 7.128 MB perf.data (~311412 samples) ]

[root@felicio ~]# grep perf_event /proc/`pidof perf`/maps | nl
     1	7fb49b435000-7fb49b4b6000 rwxs 00000000 00:09 4064                       anon_inode:[perf_event]
     2	7fb49b4b6000-7fb49b537000 rwxs 00000000 00:09 4064                       anon_inode:[perf_event]
[root@felicio ~]#

It uses per-cpu buffers.

For just one thread:

[root@felicio ~]# perf record -F 50000 --tid 26148
^C[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.330 MB perf.data (~14426 samples) ]

[root@felicio ~]# perf report -D | grep PERF_RECORD_SAMPLE | cut -d/ -f2 | cut -d: -f1 | sort -n | uniq -c | sort -nr | nl
     1	   9969 26148
[root@felicio ~]#

[root@felicio ~]# grep perf_event /proc/`pidof perf`/maps | nl
     1	7f286a51b000-7f286a59c000 rwxs 00000000 00:09 4064                       anon_inode:[perf_event]
[root@felicio ~]#

Tested-by: David Ahern <dsahern@gmail.com>
Tested-by: Lin Ming <ming.m.lin@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20110426204401.GB1746@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-15 10:02:14 -03:00
Arnaldo Carvalho de Melo
b901941819 perf tools: Honour the cpu list parameter when also monitoring a thread list
The perf_evlist__create_maps was discarding the --cpu parameter when a
--pid or --tid was specified, fix that.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20110426204401.GB1746@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-05-15 09:32:52 -03:00
Ingo Molnar
9cb5baba5e Merge commit 'v2.6.39-rc7' into sched/core 2011-05-12 09:36:18 +02:00
Lin Ming
2b348a7798 perf probe: Fix the missed parameter initialization
pubname_callback_param::found should be initialized to 0 in
fastpath lookup, the structure is on the stack and
uninitialized otherwise.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Link: http://lkml.kernel.org/r/1304066518-30420-2-git-send-email-ming.m.lin@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-10 17:06:23 +02:00
Ingo Molnar
932fed4e2e Merge commit 'v2.6.39-rc7' into perf/core
Merge reason: pull in the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-10 17:05:45 +02:00
Jesper Juhl
2d9ff66da6 perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
Including "../../annotate.h" once in
tools/perf/util/ui/browsers/annotate.c is enough. No need to do it twice.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-10 10:20:07 +02:00
Lin Ming
174a7b1f96 perf tools: Makefile: Use gcc to determine ARCH
The original Makefile uses "uname -m" to determine ARCH.
This causes problem on x86 when compile perf tool on 32 bit
userspace with a 64 bit kernel.

 bench/../../../arch/x86/lib/memcpy_64.S: Assembler messages:
 bench/../../../arch/x86/lib/memcpy_64.S:28: Error: bad register name `%rdi'

This is because "uname -m" returns x86_64 and memcpy_64.S is
included in 32 bit build.

Reported-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Link: http://lkml.kernel.org/r/1304743274.3132.17.camel@localhost
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-07 11:40:59 +02:00
Paul E. McKenney
a26ac2455f rcu: move TREE_RCU from softirq to kthread
If RCU priority boosting is to be meaningful, callback invocation must
be boosted in addition to preempted RCU readers.  Otherwise, in presence
of CPU real-time threads, the grace period ends, but the callbacks don't
get invoked.  If the callbacks don't get invoked, the associated memory
doesn't get freed, so the system is still subject to OOM.

But it is not reasonable to priority-boost RCU_SOFTIRQ, so this commit
moves the callback invocations to a kthread, which can be boosted easily.

Also add comments and properly synchronized all accesses to
rcu_cpu_kthread_task, as suggested by Lai Jiangshan.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05 23:16:54 -07:00
David Ahern
c63ca0c01d perf stat: Tell user about unsupported events in the list
Similar to perf-record, tell user about unsupported events
that will not be counted if invoked in verbose mode.

e.g.,

 $ perf stat -e dTLB-prefetch-misses -v -- sleep 1
 dTLB-prefetch-misses event is not supported by the kernel.
 dTLB-prefetch-misses: 0 0 0

 Performance counter stats for 'sleep 1':

     <not counted> dTLB-prefetch-misses

        1.001884783  seconds time elapsed

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1304114655-10600-1-git-send-email-dsahern@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-30 00:18:14 +02:00
Ingo Molnar
947b4ad1d1 perf list: Fix max event string size
Recent stalled-cycles event names were larger than the 40 chars printout
used by perf list.

Extend that, make it robust for future extensions and also adjust alignments
in face of wider event names.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n009io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-29 22:52:54 +02:00
Ingo Molnar
370faf1dd0 perf stat: Fail softly on unsupported events
David Ahern reported this perf stat failure:

> # /tmp/build-perf/perf stat -- sleep 1
>   Error: stalled-cycles-frontend event is not supported.
>   Fatal: Not all events could be opened.
>
> This is a Dell R410 with an E5620 processor.

Fail in a softer fashion on unknown/unsupported events.

Reported-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n006io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-29 16:22:33 +02:00
Ingo Molnar
fce3c786d3 perf stat: Leave more room for percentages
Triple digit percentages do not fit otherwise.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n005io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-29 16:06:09 +02:00
Ingo Molnar
2b427e14b7 perf stat: Adjust stall cycles warning percentages
Adjust to color thresholds to better match the percentages seen in
real workloads. Both are now a bit more sensitive.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n004io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-29 14:35:57 +02:00
Ingo Molnar
d3d1e86da0 perf stat: Analyze front-end and back-end stall counts
Sample output:

 Performance counter stats for './loop_1b':

        873.691065 task-clock               #    1.000 CPUs utilized
                 1 context-switches         #    0.000 M/sec
                 1 CPU-migrations           #    0.000 M/sec
                96 page-faults              #    0.000 M/sec
     2,012,637,222 cycles                   #    2.304 GHz                      (66.58%)
     1,001,397,911 stalled-cycles-frontend  #   49.76% frontend cycles idle     (66.58%)
         7,523,398 stalled-cycles-backend   #    0.37%  backend cycles idle     (66.76%)
     2,004,551,046 instructions             #    1.00  insns per cycle
                                            #    0.50  stalled cycles per insn  (66.80%)
     1,001,304,992 branches                 # 1146.063 M/sec                    (66.76%)
            39,453 branch-misses            #    0.00% of all branches          (66.64%)

        0.874046121  seconds time elapsed

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n003io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-29 14:35:55 +02:00
Ingo Molnar
129c04cb8c perf tools: Add front-end and back-end stalled cycles support
Update perf tooling to deal with front-end and back-end stalled cycles events.

Add both the default 'perf stat' output.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n002io7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-29 14:35:49 +02:00
Ingo Molnar
ede7029004 perf stat: Fix compatibility behavior
Instead of failing on an unknown event, when new perf stat is run on
older kernels:

  $ ./perf stat true
  Error: open_counter returned with 22 (Invalid argument). /bin/dmesg
  may provide additional information.

  Fatal: Not all events could be opened.

Just ignore EINVAL and ENOSYS, we'll print the results as not counted:

 Performance counter stats for 'true':

          0.239483 task-clock               #    0.493 CPUs utilized
                 0 context-switches         #    0.000 M/sec
                 0 CPU-migrations           #    0.000 M/sec
                86 page-faults              #    0.359 M/sec
           704,766 cycles                   #    2.943 GHz
     <not counted> stalled-cycles
           381,961 instructions             #    0.54  insns per cycle
            69,626 branches                 #  290.735 M/sec
             4,594 branch-misses            #    6.60% of all branches

        0.000485883  seconds time elapsed

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n1eqio5hjpn3dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-28 08:48:42 +02:00
Ingo Molnar
f9cef0a90c perf stat: Add --sync/-S option
--sync will tell perf stat to run sync() before starting a command.

This allows IO-heavy tests to be used with --repeat, without one
iteration impacting the other.

Elapsed time will stabilize for example:

  before:        3.971525714  seconds time elapsed  ( +-  8.56% )
  after:         3.211098537  seconds time elapsed  ( +-  1.52% )

So measurements will be more accurate.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n1eqio7hjpn1dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-28 08:39:39 +02:00
Ingo Molnar
9ceb1c3d1f perf stat: Fix printout vertical alignment
Before:

 |
 | Performance counter stats for '/home/mingo/hackbench 20' (5 runs):
 |
 |        71,321,607 instructions:u           #    0.42  insns per cycle  ( +-  0.00% )
 |       168,040,009 cycles:u                 #    0.000 GHz                      ( +-  0.81% )
 |
 |        1.468002368  seconds time elapsed  ( +-  1.33% )
 |

After:

 |
 | Performance counter stats for '/home/mingo/hackbench 20' (5 runs):
 |
 |        71,321,607 instructions:u           #    0.42  insns per cycle          ( +-  0.00% )
 |       168,040,009 cycles:u                 #    0.000 GHz                      ( +-  0.81% )
 |
 |        1.468002368  seconds time elapsed  ( +-  1.33% )
 |

The last column (stddev noise) is properly aligned, vertically.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-7y40wib8n1eqio7hjpn0dsrm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-27 17:48:55 +02:00
Ingo Molnar
c6264deff7 perf stat: Add -d/--detailed flag to run with a lot of events
Add the new -d/--detailed flag, which generates a pretty detailed event list:

 Performance counter stats for './hackbench 10' (10 runs):

       1514.287888 task-clock               #   10.897 CPUs utilized            ( +-  3.05% )
            39,698 context-switches         #    0.026 M/sec                    ( +- 12.19% )
             8,147 CPU-migrations           #    0.005 M/sec                    ( +- 16.55% )
            17,918 page-faults              #    0.012 M/sec                    ( +-  0.37% )
     2,944,504,050 cycles                   #    1.944 GHz                      ( +-  3.89% )  (32.60%)
     1,043,971,283 stalled-cycles           #   35.45% of all cycles are idle   ( +-  5.22% )  (44.48%)
     1,655,906,768 instructions             #    0.56  insns per cycle
                                            #    0.63  stalled cycles per insn  ( +-  1.95% )  (55.09%)
       338,832,373 branches                 #  223.757 M/sec                    ( +-  1.96% )  (64.47%)
         3,892,416 branch-misses            #    1.15% of all branches          ( +-  5.49% )  (73.12%)
       606,410,482 L1-dcache-loads          #  400.459 M/sec                    ( +-  1.29% )  (71.21%)
        31,204,395 L1-dcache-load-misses    #    5.15% of all L1-dcache hits    ( +-  3.04% )  (60.43%)
         3,922,751 LLC-loads                #    2.590 M/sec                    ( +-  6.80% )  (46.87%)
         5,037,288 LLC-load-misses          #    3.327 M/sec                    ( +-  3.56% )  (13.00%)

        0.138966828  seconds time elapsed  ( +-  4.11% )

This can be used "at a glance" for narrower analysis.

-d can also be used in addition to other -e events, to further expand an event list.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-cxs98quixs3qyvdqx3goojc4@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 21:03:16 +02:00
Ingo Molnar
8bb6c79f24 perf stat: Print out miss/hit ratio for L1 data-cache events
Print out this kind of l1-dcache-misses percentage:

 Performance counter stats for './bw_tcp localhost':

    29,956,262,201 cycles                   #    3.002 GHz                      (scaled from 85.14%)
     8,255,209,558 stalled-cycles           #   27.56% of all cycles are idle   (scaled from 86.56%)
     1,206,130,308 l1-dcache-misses         #   40.49% of all L1-dcache hits    (scaled from 86.30%)
     2,978,756,779 l1-dcache-refs           #  298.512 M/sec                    (scaled from 70.02%)
     8,861,956,159 instructions             #    0.30  insns per cycle
                                            #    0.93  stalled cycles per insn  (scaled from 84.27%)
     1,644,306,068 branches                 #  164.782 M/sec                    (scaled from 86.43%)
        74,778,443 branch-misses            #    4.55% of all branches          (scaled from 70.69%)
       9978.695711 task-clock               #    0.693 CPUs utilized

       14.404347983  seconds time elapsed

And color the result depending on the severity of cache-trashing.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-54gmz0zymaid84zcs7joq02p@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:32:24 +02:00
Ingo Molnar
c78df6c1d4 perf stat: Print branch misses warning colors
Print the missed-branches percentage with different warning level ASCII colors,
as the percentage passes the 5%/10%/20% thresholds.

These thresholds are set to relatively low levels, because on most CPUs even a
moderate percentage of branch-misses already shows up as a slowdown.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-ybqukg7p86leiup7gl03ecgk@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:58 +02:00
Ingo Molnar
a5d243d04a perf stat: Print stalled cycles warning colors
Print the stalled-cycles percentage with different warning level ASCII colors,
as the percentage passes the 25%/50%/75% thresholds.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-e25zz44rcms7mu9az4fu5zp0@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:58 +02:00
Ingo Molnar
f99844cb76 perf stat: Fix -nan% output in perf stat noise printouts
Before:

                 0 CPU-migrations           #    0.000 M/sec                    ( +-  -nan% )

After:

                 0 CPU-migrations           #    0.000 M/sec                    ( +-  0.00% )

Also factor out the noise printing function.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-z89h2v1bk1mikcbsf7e6v34q@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:57 +02:00
Ingo Molnar
1fc570ad89 perf stat: Add stalled cycles to the default output
The new default output looks like this:

 Performance counter stats for './loop_1b_instructions':

        236.010686 task-clock               #    0.996 CPUs utilized
                 0 context-switches         #    0.000 M/sec
                 0 CPU-migrations           #    0.000 M/sec
                99 page-faults              #    0.000 M/sec
       756,487,646 cycles                   #    3.205 GHz
       354,938,996 stalled-cycles           #   46.92% of all cycles are idle
     1,001,403,797 instructions             #    1.32  insns per cycle
                                            #    0.35  stalled cycles per insn
       100,279,773 branches                 #  424.895 M/sec
            12,646 branch-misses            #    0.013 % of all branches

        0.236902540  seconds time elapsed

We dropped cache-refs and cache-misses and added stalled-cycles - this is a
more generic "how well utilized is the CPU" metric.

If the stalled-cycles ratio is too high then more specific measurements can be
taken to figure out the source of the inefficiency.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-pbpl2l4mn797s69bclfpwkwn@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:57 +02:00
Ingo Molnar
481f988a01 perf stat: Add stalled cycles accounting, prettify the resulting output
Add stalled cycles accounting and use it to print the "cycles stalled per
instruction" value.

Also change the unit of the cycles output from M/sec to GHz - this is more
intuitive.

Prettify the output to:

 Performance counter stats for './loop_1b_instructions':

        239.775036 task-clock               #    0.997 CPUs utilized
       761,903,912 cycles                   #    3.178 GHz
       356,620,620 stalled-cycles           #   46.81% of all cycles are idle
     1,001,578,351 instructions             #    1.31  insns per cycle
                                            #    0.36  stalled cycles per insn
            14,782 cache-references         #    0.062 M/sec
             5,694 cache-misses             #   38.520 % of all cache refs

        0.240493656  seconds time elapsed

Also adjust the --repeat output to make the percentages align vertically:

 Performance counter stats for './loop_1b_instructions' (10 runs):

        236.096793 task-clock               #    0.997 CPUs utilized             ( +-   0.011% )
       756,553,086 cycles                   #    3.204 GHz                       ( +-   0.002% )
       354,942,692 stalled-cycles           #   46.92% of all cycles are idle    ( +-   0.008% )
     1,001,389,700 instructions             #    1.32  insns per cycle
                                            #    0.35  stalled cycles per insn   ( +-   0.000% )
            10,166 cache-references         #    0.043 M/sec                     ( +-   0.742% )
               468 cache-misses             #    4.608 % of all cache refs       ( +-  13.385% )

        0.236874136  seconds time elapsed   ( +- 0.01% )

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-uapziqny39601apdmmhoz7hk@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:56 +02:00
Ingo Molnar
dcd9936a5a perf stat: Factor our shadow stats
Create update_shadow_stats() which is then used in both read_counter_aggr()
and read_counter().

This not only simplifies the code but also fixes a bug: HW_CACHE_REFERENCES
was not updated in read_counter().

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-9uc55z3g88r47exde7zxjm6p@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:56 +02:00
Ingo Molnar
749141d926 perf stat: Make all displayed event names parseable as well
Right now we display this by default:

          0.202204 task-clock-msecs         #      0.282 CPUs
                 0 context-switches         #      0.000 M/sec
                 0 CPU-migrations           #      0.000 M/sec
                85 page-faults              #      0.420 M/sec

The task-clock-msecs event cannot actually be passed back as an
event name, the event name we recognize is 'task-clock'.

So change the output of the cpu-clock and task-clock events
to be idempotent.

( Units should be printed out in the right-side column, if needed. )

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-lexrnbzy09asscgd4f7oac4i@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:55 +02:00
Ingo Molnar
ceb53fbf6d perf stat: Fail more clearly when an invalid modifier is specified
Currently we fail without printing any error message on "perf stat -e task-clock-msecs".

The reason is that the task-clock event is matched and the "-msecs" postfix is assumed
to be an event modifier - but is not recognized.

This patch changes the code to be more informative:

 $ perf stat -e task-clock-msecs true
 invalid event modifier: '-msecs'
 Run 'perf list' for a list of valid events and modifiers

And restructures the return value of parse_event_modifier() to allow
the printing of all variants of invalid event modifiers.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-wlaw3dvz1ly6wple8l52cfca@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:55 +02:00
Ingo Molnar
b908debd4e perf tools: Accept case-insensitive symbolic event variants
We currently fail on something like '-e CPU-migrations', with:

  invalid or unsupported event: 'CPU-migrations'

While 'CPU-migrations' is how we actually print out the event
in the default perf stat output:

 Performance counter stats for 'true':

          0.202204 task-clock-msecs         #      0.282 CPUs
                 0 context-switches         #      0.000 M/sec
                 0 CPU-migrations           #      0.000 M/sec

So change the matching to be case-insensitive.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-omcm3edjjtx83a4kh2e244se@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:55 +02:00
Ingo Molnar
d58f4c82fe perf stat: Print cache misses as percentage
Before:

       113,393,041 cache-references         #     83.636 M/sec
         7,052,454 cache-misses             #      5.202 M/sec

After:

       112,589,441 cache-references         #     87.925 M/sec
         6,556,354 cache-misses             #      5.823 %

misses/hits percentages are more expressive than absolute numbers
or rates.

(Also prettify the CPUs printout line to not have a trailing whitespace.)

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-axm28f43x439bl41zkvfzd63@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:54 +02:00
Ingo Molnar
11ba2b85f5 perf stat: Print stalled cycles percentage
Print:

           611,527 cycles
           400,553 instructions             # (  0.71 instructions per cycle )
            77,809 stalled-cycles           # ( 12.71% of all cycles )

        0.000610987  seconds time elapsed

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/n/tip-fd6x8r1cpyb6zhlrc4ix8m45@git.kernel.org
2011-04-26 20:04:54 +02:00
Ingo Molnar
94403f8863 perf events: Add stalled cycles generic event - PERF_COUNT_HW_STALLED_CYCLES
The new PERF_COUNT_HW_STALLED_CYCLES event tries to approximate
cycles the CPU does nothing useful, because it is stalled on a
cache-miss or some other condition.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-fue11vymwqsoo5to72jxxjyl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26 20:04:53 +02:00
Jiri Kosina
07f9479a40 Merge branch 'master' into for-next
Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.
2011-04-26 10:22:59 +02:00
Jonathan Corbet
625f2a378e sched: Get rid of lock_depth
Neil Brown pointed out that lock_depth somehow escaped the BKL
removal work.  Let's get rid of it now.

Note that the perf scripting utilities still have a bunch of
code for dealing with common_lock_depth in tracepoints; I have
left that in place in case anybody wants to use that code with
older kernels.

Suggested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110422111910.456c0e84@bike.lwn.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-24 13:18:38 +02:00
David Ahern
9cbdb70209 perf script: improve validation of sample attributes for output fields
Check for required sample attributes using evsel rather than sample_type
in the session header. If the attribute for a default field is not
present for the event type (e.g., new command operating on file from
older kernel) the field is removed from the output list.

Expected event types must exist. For example, if a user specifies

  -f trace:time,trace -f sw:time,cpu,sym

the perf.data file must contain both tracepoints and software events
(ie., it is an error if either does not exist in the file).

Attribute checking is done once at the beginning of perf-script rather
than for each sample.

v1 -> v2:
- addressed comments from acme

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1302148460-570-1-git-send-email-daahern@cisco.com
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-20 07:27:52 -03:00
Arun Sharma
0817a6a3a4 perf script: Add support for PERF_TYPE_RAW
Useful for getting stack traces for hardware events not handled by
PERF_TYPE_HARDWARE.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arun Sharma <asharma@fb.com>
Link: http://lkml.kernel.org/n/tip-qimdcdpekjqxuyqovy4kjusx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-19 11:08:58 -03:00
Michael Witten
f18568aae5 perf tools: git mv tools/perf/{features-tests.mak,config/}
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Link: http://lkml.kernel.org/n/tip-a6zhefjayuounko1tk5sjji2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-19 08:18:36 -03:00
Michael Witten
7fbd065f5a perf tools: Move `try-cc'
The `try-cc' user-defined function was in tools/perf/feature-tests.mak;
this commit moves it to tools/perf/config/utilities.mak.

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Link: http://lkml.kernel.org/n/tip-bqhwcuxsrve0iodn6q4ejaoi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-19 08:18:36 -03:00
Michael Witten
ced465c400 perf tools: Makefile: PYTHON{,_CONFIG} to bandage Python 3 incompatibility
Currently, Python 3 is not supported by perf's code; this
can cause the build to fail for systems that have Python 3
installed as the default python:

  python{,-config}

The Correct Solution is to write compatibility code so that
Python 3 works out-of-the-box.

However, users often have an ancillary Python 2 installed:

  python2{,-config}

Therefore, a quick fix is to allow the user to specify those
ancillary paths as the python binaries that Makefile should
use, thereby avoiding Python 3 altogether; as an added benefit,
the Python binaries may be installed in non-standard locations
without the need for updating any PATH variable.

This commit adds the ability to set PYTHON and/or PYTHON_CONFIG
either as environment variables or as make variables on the
command line; the paths may be relative, and usually only PYTHON
is necessary in order for PYTHON_CONFIG to be defined implicitly.
Some rudimentary error checking is performed when the user
explicitly specifies a value for any of these variables.

In addition, this commit introduces significantly robust makefile
infrastructure for working with paths and communicating with the
shell; it's currently only used for handling Python, but I hope
it will prove useful in refactoring the makefiles.

Thanks to:

  Raghavendra D Prabhu <rprabhu@wnohang.net>

for motivating this patch.

Acked-by: Raghavendra D Prabhu <rprabhu@wnohang.net>
Link: http://lkml.kernel.org/r/e987828e-87ec-4973-95e7-47f10f5d9bab-mfwitten@gmail.com
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-19 08:18:36 -03:00
Michael Witten
3643b133f2 perf tools: Makefile: Clean up `python/perf.so' rule
There is no need for a subshell or an explicit `export';
as per the POSIX Shell Command Language specification:

  http://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_09_01
  http://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_10_02

It is only necessary to include the environment variable
assignment just before the command to be run.

Also, it is better to use single-quotes, because GNU make
might expand `$(BASIC_CFLAGS)' into something that the shell
could interpret within double-quotes.

Acked-by: Raghavendra D Prabhu <rprabhu@wnohang.net>
Link: http://lkml.kernel.org/n/tip-58n38o02ocuzrm9qh096hsf5@git.kernel.org
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-19 08:18:36 -03:00
Arnaldo Carvalho de Melo
aeafcbaf4f perf symbols: Give more useful names to 'self' parameters
One more installment on an area that is mostly dormant.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-19 08:18:35 -03:00
Ingo Molnar
68d2cf25d3 Merge branch 'perf/urgent' into perf/core
Merge reason: we'll be queueing up dependent changes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-19 07:56:17 +02:00
Arnaldo Carvalho de Melo
5d2cd90922 perf evsel: Fix use of inherit
perf stat doesn't mmap and its perfectly fine for it to use task-bound
counters with inheritance.

So set the attr.inherit on the caller and leave the syscall itself to
validate it.

When the mmap fails perf_evlist__mmap will just emit a warning if this
is the failure reason.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20110414170121.GC3229@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-15 12:52:28 -03:00
Lin Ming
db9a9cbc81 perf hists browser: Fix seg fault when annotate null symbol
In hists browser, press hotkey 'a' to annotate current symbol.

Now it causes segment fault if 'a' is pressed on a null symbol.

Here are 2 small bugs:
- In perf_evsel__hists_browse, the condition check after 'a' is pressed
  is not correct, we should check ->sym instead of ->map.
- In symbol__tui_annotate we must check whether sym is NULL or not
  before getting annotation structure.

This patch fixes above 2 small bugs.

Link: http://lkml.kernel.org/r/1302244286.4106.36.camel@minggr.sh.intel.com
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-15 12:51:49 -03:00
Justin P. Mattock
6eab04a876 treewide: remove extra semicolons
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-10 17:01:05 +02:00
Eric Dumazet
621d26567f perf: Fix a build error with some GCC versions
Fix this:

 util/cgroup.c: In function ‘open_cgroup’:
 util/cgroup.c:16:16: error: ‘saved_ptr’ may be used uninitialized in this function
 util/cgroup.c:16:16: note: ‘saved_ptr’ was declared here

Apparently newer GCC (4.6) can figure out that this variable is properly
initialized - but some versions of GCC (such as 4.5.2) need help.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-08 17:40:21 +02:00
Linus Torvalds
8b9686ff4d Merge branches 'x86-fixes-for-linus', 'sched-fixes-for-linus', 'timers-fixes-for-linus', 'irq-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, fpu: Fix FPU exception handling on non-SSE systems
  x86, hibernate: Initialize mmu_cr4_features during boot
  x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
  x86: visws: Fixup irq overhaul fallout

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Clean up rebalance_domains() load-balance interval calculation

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
  rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix cpumask leak in __setup_irq()

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf probe: Fix listing incorrect line number with inline function
  perf probe: Fix to find recursively inlined function
  perf probe: Fix multiple --vars options behavior
  perf probe: Fix to remove redundant close
  perf probe: Fix to ensure function declared file
2011-04-07 12:12:58 -07:00
Linus Torvalds
42933bac11 Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings
2011-04-07 11:14:49 -07:00
Masami Hiramatsu
1d46ea2a6a perf probe: Fix listing incorrect line number with inline function
Fix a bug showing incorrect line number when a probe is put on the head of an
inline function. This patch updates find_perf_probe_point() and introduces new
rules to get correct line number.

 - If debuginfo doesn't have a correct file name, we shouldn't return line
   number too, because, without file name, line number is meaningless.

 - If the address is in a function, it stores the function name and the offset
   from the function entry.

   - If the address is on a line, it tries to get the relative line number from
     the function entry line, except for the address is same as the entry
     address of the function (in this case, the relative line number should
     be 0).

     - If the address is in an inline function entry (call-site), it uses the
       inline function call line number as the line on which the address is.

   - If the address is in an inline function body, it stores the inline
     function name and offset from the inline function call site instead of the
     (non-inlined) function.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092605.2132.11629.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-05 15:38:12 -03:00
Masami Hiramatsu
1d878083c2 perf probe: Fix to find recursively inlined function
Fix die_find_inlinefunc() to return correct innermost inlined function
at given address. Without this fix, it returns the outermost inlined
function.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092559.2132.78634.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-05 15:36:47 -03:00
Masami Hiramatsu
cc446446ff perf probe: Fix multiple --vars options behavior
Fix a bug that perf-probe fails to initialize libdwfl and shows incorrect error
when user gives multiple --vars options.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092553.2132.42691.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-05 15:36:04 -03:00
Masami Hiramatsu
f0c4801a17 perf probe: Fix to remove redundant close
Since dwfl_end() closes given fd with dwfl, caller doesn't need to close its fd
when finishing process.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092547.2132.93728.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-05 15:35:16 -03:00
Masami Hiramatsu
7d21635ac5 perf probe: Fix to ensure function declared file
Fix to ensure function declared file matches given file name. This fixes
a potential bug.

As I've commented on Lin Ming's fastpath enhancement, decl_file should
be checked on each probe point if user gives a probe point as func@file.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110330092541.2132.3584.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-04-05 15:34:53 -03:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Frederic Weisbecker
800cd25c12 perf: mmap 512 kiB by default
The default setting of perf record is to mmap 128 pages if the user
did not override with -m.

However the page size may vary accross different architecture
settings, giving different default size between each.

Moreover the kernel side still has a default max number of mlocked
pages of 512 kiB + 1 page for unprivileged users. 128 + 1 pages
with page size > 4096 overlaps this threshold.

Thus, better adapt to this limitation and set the default number of
pages to fit those 512 kiB + 1 page.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1301535324-9735-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-31 13:02:55 +02:00
Arnaldo Carvalho de Melo
176fcc5c5f perf script: Add more documentation about the -f/--fields parameters
Using the commit log for 2c9e45f.

Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-30 15:30:43 -03:00
David Ahern
2c9e45f7a2 perf script: If type not given fields apply to all event types
Allow:
  perf script -f <fields>

to be equivalent to:
  perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>

i.e., the specified fields apply to all event types if the type string
is not given.

The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,

  -f trace: -f comm,tid,time,sym

The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:

  "Overriding previous field request for all events."

Alternativey, consider the order:

  -f comm,tid,time,sym -f trace:

The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.

For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:

  perf script -f comm,tid,trace 2>&1 | less
  'trace' not valid for hardware events. Ignoring.
  'trace' not valid for software events. Ignoring.

Alternatively, if the type is given an invalid field is specified it is an
error. For example:

    perf script -v -f sw:comm,tid,trace 2>&1 | less
    'trace' not valid for software events.

At this point usage is displayed, and perf-script exits.

Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-30 14:43:11 -03:00
Ingo Molnar
652d78fd7a Merge commits 'ca6a42586fae' and 'c286c419c784' into perf/urgent
Pick up these two commits from Arnaldo's perf/core tree:

  ca6a42586f: perf tools: Emit clearer message for sys_perf_event_open ENOENT return
  c286c419c7: perf tools: Fixup exit path when not able to open events

As they are really fixes we want to have sooner than laer.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-30 09:08:39 +02:00
Robert Richter
1b7155f7de perf tools: Fix NO_NEWT=1 python build error
Fix the following build error:

     GEN python/perf.so
 In file included from util/evsel.h:10,
                  from util/python.c:6:
 util/hist.h:106:18: error: newt.h: No such file or directory
 error: command 'x86_64-pc-linux-gnu-gcc' failed with exit status 1
 make: *** [python/perf.so] Error 1

by passing BASIC_CFLAGS to setup.py. BASIC_CFLAGS variable contains
the -DNO_NEWT_SUPPORT switch which prevents building python c
extension with newt.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20110329180236.GA19366@erda.amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-29 16:46:57 -03:00
David S. Miller
4d43951756 perf symbols: Properly align symbol_conf.priv_size
If symbol_conf.priv_size is not a multiple of "sizeof(u64)" we'll bus
error on sparc64 in symbol__new because the "struct symbol *" pointer
is computed by adding symbol_conf.priv_size to the memory allocated.

We cannot isolate the fix to symbol__new and symbol__delete since the
private area is computed by subtracting the priv_size value from a
"struct symbol" pointer, so then the private area can still be
potentially unaligned.

So, simply align the symbol_conf.priv_size value in symbol__init()

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110328.175849.112593455.davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-29 14:18:39 -03:00
David Ahern
ca6a42586f perf tools: Emit clearer message for sys_perf_event_open ENOENT return
Resend of patch sent back in January 2011 in light of recent confusion around
unsupported events for a given platform.

Improve sys_perf_event_open ENOENT return handling in top and record, just
like 5a3446b does for stat.

Retry of Arnaldo's patch using ui_warning instead of die which allows the
fallback from hardware cycles to software clock.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
LKML-Reference: <1301080271-20945-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
[ committer note: Some adjustments to make it apply to newer codebase ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-29 13:40:27 -03:00
Lin Ming
cd25f8bc26 perf probe: Add fastpath to do lookup by function name
v3 -> v2:
- Make pubname_search_cb more generic
- Add fastpath to find_probes also

v2 -> v1:
- Don't compare file names with cu_find_realpath(...), instead, compare
  them with the name returned by dwarf_decl_file(sp_die)

The vmlinux file may have thousands of CUs.
We can lookup function name from .debug_pubnames section
to avoid the slow loop on CUs.

1. Improvement data for find_line_range

./perf stat -e cycles -r 10 -- ./perf probe -k /home/mlin/vmlinux \
        -s /home/mlin/linux-2.6 \
        --line csum_partial_copy_to_user > tmp.log

before patch applied
=====================
       847,988,276 cycles

        0.355075856  seconds time elapsed

after patch applied
=====================
       206,102,622 cycles

        0.086883555  seconds time elapsed

2. Improvement data for find_probes

./perf stat -e cycles -r 10 -- ./perf probe -k /home/mlin/vmlinux \
        -s /home/mlin/linux-2.6 \
        --vars csum_partial_copy_to_user > tmp.log

before patch applied
=====================
       848,490,844 cycles

        0.355307901  seconds time elapsed

after patch applied
=====================
       205,684,469 cycles

        0.086694010  seconds time elapsed

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
LKML-Reference: <1301041668.14111.52.camel@minggr.sh.intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-29 13:40:27 -03:00
Arnaldo Carvalho de Melo
c286c419c7 perf tools: Fixup exit path when not able to open events
We have to deal with the TUI mode in perf top, so that we don't end up
with a garbled screen when, say, a non root user on a machine with a
paranoid setting (the default) tries to use 'perf top'.

Introduce a ui__warning_paranoid() routine shared by top and record that
tells the user the valid values for /proc/sys/kernel/perf_event_paranoid.

Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-29 13:40:27 -03:00
Andrew Lutomirski
6c6804fb2c perf symbols: Fix vsyscall symbol lookup
Perf can't currently trace into the vsyscall page.  It looks like it was
meant to work.

Tested on 2.6.38 and today's -git.

The bug is easy to reproduce.  Compile this:

int main()
{
	int i;
	struct timespec t;
	for(i = 0; i < 10000000; i++)
		clock_gettime(CLOCK_MONOTONIC, &t);
	return 0;
}

and run it through perf record; perf report.  The top entry shows
"[unknown]" and you can't zoom in.

It looks like there are two issues.  The first is a that a test for user
mode executing in kernel space is backwards.  (That's the first hunk
below).  The second (I think) is that something's wrong with the code
that generates lots of little struct dso objects for different sections
-- when it runs on vmlinux it results in bogus long_name values which
cause objdump to fail.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LPU-Reference: <AANLkTikxSw5+wJZUWNz++nL7mgivCh_Zf=2Kq6=f9Ce_@mail.gmail.com>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-28 14:44:15 -03:00
Linus Torvalds
2a20b02c05 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue
  perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows
  perf symbols: Look at .dynsym again if .symtab not found
  perf build-id: Add quirk to deal with perf.data file format breakage
  perf session: Pass evsel in event_ops->sample()
  perf: Better fit max unprivileged mlock pages for tools needs
  perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()
  perf top: Fix uninitialized 'counter' variable
  tracing: Fix set_ftrace_filter probe function display
  perf, x86: Fix Intel fixed counters base initialization
2011-03-25 17:53:09 -07:00
Arnaldo Carvalho de Melo
60e4b10c5a perf symbols: Look at .dynsym again if .symtab not found
The original intent of the code was to repeat the search with
want_symtab = 0. But as the code stands now, we never hit the "default"
case of the switch statement. Which means we never repeat the search.

Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Arun Sharma <asharma@fb.com>
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Dave Martin <dave.martin@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-23 19:29:46 -03:00
Arnaldo Carvalho de Melo
b25114817a perf build-id: Add quirk to deal with perf.data file format breakage
The a1645ce1 changeset:

"perf: 'perf kvm' tool for monitoring guest performance from host"

Added a field to struct build_id_event that broke the file format.

Since the kernel build-id is the first entry, process the table using
the old format if the well known '[kernel.kallsyms]' string for the
kernel build-id has the first 4 characters chopped off (where the pid_t
sits).

Reported-by: Han Pingtian <phan@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Cc: stable@kernel.org
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-23 19:29:40 -03:00
Arnaldo Carvalho de Melo
9e69c21082 perf session: Pass evsel in event_ops->sample()
Resolving the sample->id to an evsel since the most advanced tools,
report and annotate, and the others will too when they evolve to
properly support multi-event perf.data files.

Good also because it does an extra validation, checking that the ID is
valid when present. When that is not the case, the overhead is just a
branch + function call (perf_evlist__id2evsel).

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-23 19:28:58 -03:00
Akihiro Nagai
ce2d17ca7f perf top: Fix uninitialized 'counter' variable
builtin-top.c has an uninitialized variable.
gcc(version 4.5.1) warns about it and it results in build failure:

 builtin-top.c: In function 'display_thread':
 builtin-top.c:518:9: error: 'counter' may be used uninitialized

This situation can indeed trigger, if the getline() call in
prompt_integer() fails.

Signed-off-by: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110323072939.11638.50173.stgit@localhost6.localdomain6>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-23 10:38:32 +01:00
Linus Torvalds
b52307ca14 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest:
  ktest: Add STOP_TEST_AFTER to stop the test after a period of time
  ktest: Monitor kernel while running of user tests
  ktest: Fix bug where the test would not end after failure
  ktest: Add BISECT_FILES to run git bisect on paths
  ktest: Add BISECT_SKIP
  ktest: Add manual bisect
  ktest: Handle kernels before make oldnoconfig
  ktest: Start failure timeout on panic too
  ktest: Print logfile name on failure
2011-03-21 14:13:48 -07:00
Linus Torvalds
619297855a Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  trace, filters: Initialize the match variable in process_ops() properly
  trace, documentation: Fix branch profiling location in debugfs
  oprofile, s390: Cleanups
  oprofile, s390: Remove hwsampler_files.c and merge it into init.c
  perf: Fix tear-down of inherited group events
  perf: Reorder & optimize perf_event_context to remove alignment padding on 64 bit builds
  perf: Handle stopped state with tracepoints
  perf: Fix the software events state check
  perf, powerpc: Handle events that raise an exception without overflowing
  perf, x86: Use INTEL_*_CONSTRAINT() for all PEBS event constraints
  perf, x86: Clean up SandyBridge PEBS events
  perf lock: Fix sorting by wait_min
  perf tools: Version incorrect with some versions of grep
  perf evlist: New command to list the names of events present in a perf.data file
  perf script: Add support for H/W and S/W events
  perf script: Add support for dumping symbols
  perf script: Support custom field selection for output
  perf script: Move printing of 'common' data from print_event and rename
  perf tracing: Remove print_graph_cpu and print_graph_proc from trace-event-parse
  perf script: Change process_event prototype
  ...
2011-03-18 10:38:34 -07:00
Linus Torvalds
971f115a50 Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
  USB: Add support for SuperSpeed isoc endpoints
  xhci: Clean up cycle bit math used during stalls.
  xhci: Fix cycle bit calculation during stall handling.
  xhci: Update internal dequeue pointers after stalls.
  USB: Disable auto-suspend for USB 3.0 hubs.
  USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
  xhci: Return canceled URBs immediately when host is halted.
  xhci: Fixes for suspend/resume of shared HCDs.
  xhci: Fix re-init on power loss after resume.
  xhci: Make roothub functions deal with device removal.
  xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
  xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
  xhci: Register second xHCI roothub.
  xhci: Change xhci_find_slot_id_by_port() API.
  xhci: Refactor bus suspend state into a struct.
  xhci: Index with a port array instead of PORTSC addresses.
  USB: Set usb_hcd->state and flags for shared roothubs.
  usb: Make core allocate resources per PCI-device.
  usb: Store bus type in usb_hcd, not in driver flags.
  usb: Change usb_hcd->bandwidth_mutex to a pointer.
  ...
2011-03-16 15:04:26 -07:00
Marcin Slusarz
9df03abeda perf lock: Fix sorting by wait_min
If lock was uncontended, wait_time_min == ULLONG_MAX, so we need to
handle this case differently to show high wait times first

Acked-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110222174715.GC9687@joi.lan>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-16 09:05:58 -03:00
Josh Hunt
58d406ed6a perf tools: Version incorrect with some versions of grep
Some versions of grep don't treat '\s' properly. When building perf on such
systems and using a kernel tarball the perf version is unable to be determined
from the main kernel Makefile and the user is left with a version of '..'.
Replacing the use of '\s' with '[[:space:]]', which should work in all grep
versions, gives a usable version number.

Reported-by: Tapan Dhimant <tdhimant@akamai.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tapan Dhimant <tdhimant@akamai.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@kernel.org
LKML-Reference: <1300241800-30281-1-git-send-email-johunt@akamai.com>
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-16 08:59:50 -03:00
Ingo Molnar
8b7cdd08fe Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent 2011-03-16 13:44:06 +01:00
Linus Torvalds
a926021cb1 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (184 commits)
  perf probe: Clean up probe_point_lazy_walker() return value
  tracing: Fix irqoff selftest expanding max buffer
  tracing: Align 4 byte ints together in struct tracer
  tracing: Export trace_set_clr_event()
  tracing: Explain about unstable clock on resume with ring buffer warning
  ftrace/graph: Trace function entry before updating index
  ftrace: Add .ref.text as one of the safe areas to trace
  tracing: Adjust conditional expression latency formatting.
  tracing: Fix event alignment: skb:kfree_skb
  tracing: Fix event alignment: mce:mce_record
  tracing: Fix event alignment: kvm:kvm_hv_hypercall
  tracing: Fix event alignment: module:module_request
  tracing: Fix event alignment: ftrace:context_switch and ftrace:wakeup
  tracing: Remove lock_depth from event entry
  perf header: Stop using 'self'
  perf session: Use evlist/evsel for managing perf.data attributes
  perf top: Don't let events to eat up whole header line
  perf top: Fix events overflow in top command
  ring-buffer: Remove unused #include <linux/trace_irq.h>
  tracing: Add an 'overwrite' trace_option.
  ...
2011-03-15 18:31:30 -07:00
Ingo Molnar
5e814dd597 perf probe: Clean up probe_point_lazy_walker() return value
Newer compilers (gcc 4.6) complains about:

        return ret < 0 ?: 0;

For the following reason:

  util/probe-finder.c: In function ‘probe_point_lazy_walker’:
  util/probe-finder.c:1331:18: error: the omitted middle operand in ?: will always be ‘true’, suggest explicit middle operand [-Werror=parentheses]

And indeed the return value is a somewhat obscure (but correct) value
of 'true', so return 'ret' instead - this is cleaner and unconfuses
GCC as well.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-15 20:51:09 +01:00
Arnaldo Carvalho de Melo
43adec955e perf evlist: New command to list the names of events present in a perf.data file
[root@emilia ~]# perf record -a -e sched:* -e timer:timer* sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.172 MB perf.data (~7530 samples) ]
[root@emilia ~]# perf evlist
sched:sched_kthread_stop
sched:sched_kthread_stop_ret
sched:sched_wakeup
sched:sched_wakeup_new
sched:sched_switch
sched:sched_migrate_task
sched:sched_process_free
sched:sched_process_exit
sched:sched_wait_task
sched:sched_process_wait
sched:sched_process_fork
sched:sched_stat_wait
sched:sched_stat_sleep
sched:sched_stat_iowait
sched:sched_stat_runtime
sched:sched_pi_setprio
timer:timer_init
timer:timer_start
timer:timer_expire_entry
timer:timer_expire_exit
timer:timer_cancel
[root@emilia ~]#

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-15 11:10:48 -03:00
David Ahern
1424dc9680 perf script: Add support for H/W and S/W events
Custom fields set for each type by prepending field argument with type.
For file with multiple event types (e.g., trace and S/W) display of an
event type suppressed by setting output fields to "".

e.g.,
perf record -ga -e sched:sched_switch -e cpu-clock -c 10000000 -R -- sleep 1
perf script

openssl 11496 [000]  9711.807107: cpu-clock-msecs:
        ffffffff810c22dc arch_local_irq_restore ([kernel.kallsyms])
        ffffffff810c518c __alloc_pages_nodemask ([kernel.kallsyms])
        ffffffff810297b2 pte_alloc_one ([kernel.kallsyms])
        ffffffff810d8b98 __pte_alloc ([kernel.kallsyms])
        ffffffff810daf07 handle_mm_fault ([kernel.kallsyms])
        ffffffff8138763a do_page_fault ([kernel.kallsyms])
        ffffffff81384a65 page_fault ([kernel.kallsyms])
            7f6130507d70 asn1_check_tlen (/lib64/libcrypto.so.1.0.0c)
                       0  ()

         openssl 11496 [000]  9711.808042: sched_switch: prev_comm=openssl ...
     kworker/0:0     4 [000]  9711.808067: sched_switch: prev_comm=kworker/...
         swapper     0 [001]  9711.808090: sched_switch: prev_comm=kworker/...
            sshd 11451 [001]  9711.808185: sched_switch: prev_comm=sshd pre...
swapper     0 [001]  9711.816155: cpu-clock-msecs:
        ffffffff81023609 native_safe_halt ([kernel.kallsyms])
        ffffffff8100132a cpu_idle ([kernel.kallsyms])
        ffffffff8137cf9b start_secondary ([kernel.kallsyms])

openssl 11496 [000]  9711.817104: cpu-clock-msecs:
            7f61304ad723 AES_cbc_encrypt (/lib64/libcrypto.so.1.0.0c)
            7fff3402f950  ()
        12f0debc9a785634  ()

swapper     0 [001]  9711.826155: cpu-clock-msecs:
        ffffffff81023609 native_safe_halt ([kernel.kallsyms])
        ffffffff8100132a cpu_idle ([kernel.kallsyms])
        ffffffff8137cf9b start_secondary ([kernel.kallsyms])

To suppress trace events within the file and use default output for S/W events:
perf script -f trace:

or to suppress S/W events and do default display for trace events:
perf script -f sw:

Custom field selections:
perf script -f sw:comm,tid,time -f trace:time,trace

         openssl 11496  9711.797162:
         swapper     0  9711.807071:
         openssl 11496  9711.807107:
 9711.808042: prev_comm=openssl prev_pid=11496 prev_prio=120 prev_state=R ...
 9711.808067: prev_comm=kworker/0:0 prev_pid=4 prev_prio=120 prev_state=S ...
 9711.808090: prev_comm=kworker/0:0 prev_pid=0 prev_prio=120 prev_state=R ...
 9711.808185: prev_comm=sshd prev_pid=11451 prev_prio=120 prev_state=S ==>...
         swapper     0  9711.816155:
         openssl 11496  9711.817104:
         swapper     0  9711.826155:

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-7-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-14 17:07:20 -03:00
David Ahern
c0230b2bfb perf script: Add support for dumping symbols
Add option to dump symbols found in events.

e.g., perf script -f comm,pid,tid,time,trace,sym

swapper     0/0       537.037184: prev_comm=swapper prev_pid=0 prev_prio=120...
        ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms])
        ffffffff81382ac5 schedule ([kernel.kallsyms])
        ffffffff8100134a cpu_idle ([kernel.kallsyms])
        ffffffff81370b39 rest_init ([kernel.kallsyms])
        ffffffff81696c23 start_kernel ([kernel.kallsyms].init.text)
        ffffffff816962af x86_64_start_reservations ([kernel.kallsyms].init.text)
        ffffffff816963b9 x86_64_start_kernel ([kernel.kallsyms].init.text)

sshd  1675/1675    537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120...
        ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms])
        ffffffff81382ac5 schedule ([kernel.kallsyms])
        ffffffff813837aa schedule_hrtimeout_range_clock ([kernel.kallsyms])
        ffffffff81383886 schedule_hrtimeout_range ([kernel.kallsyms])
        ffffffff8110c4f9 poll_schedule_timeout ([kernel.kallsyms])
        ffffffff8110cd20 do_select ([kernel.kallsyms])
        ffffffff8110ced8 core_sys_select ([kernel.kallsyms])
        ffffffff8110d00d sys_select ([kernel.kallsyms])
        ffffffff81002bc2 system_call ([kernel.kallsyms])
            7f1647e56e93 __GI_select (/lib64/libc-2.12.90.so)

netstat  1692/1692    537.038664: prev_comm=netstat prev_pid=1692 prev_prio=...
        ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms])
        ffffffff81382ac5 schedule ([kernel.kallsyms])
        ffffffff81002c3a sysret_careful ([kernel.kallsyms])
            7f7a6cd1b210 __GI___libc_read (/lib64/libc-2.12.90.so)

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-6-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-14 17:06:50 -03:00
David Ahern
745f43e343 perf script: Support custom field selection for output
Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).

Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.

Thanks to Frederic Weisbecker for detailed suggestions on this approach.

Examples (output compressed)

1. trace, default format

perf record -ga -e sched:sched_switch
perf script

swapper    0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
   sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...

2. trace, custom format

perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace     <--- omitting cpu and event name

swapper    0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
   sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-14 17:06:16 -03:00
David Ahern
c70c94b474 perf script: Move printing of 'common' data from print_event and rename
This change does impact output: latency data is trace specific and is
now printed after the common data - comm, tid, cpu, time and event name.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-4-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-14 17:05:55 -03:00
David Ahern
2ee7a49f93 perf tracing: Remove print_graph_cpu and print_graph_proc from trace-event-parse
Next patch moves printing of 'common' data into perf-script which
removes the need for these functions.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-3-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-14 17:05:51 -03:00
David Ahern
be6d842a65 perf script: Change process_event prototype
Prepare for handling of samples for any event type.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-2-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-14 17:05:50 -03:00
Frederic Weisbecker
cfd748ae06 perf stat: Provide support for filters
Now the --filter option is usable with perf stat too.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1300117230-8404-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-14 13:37:52 -03:00
Arnaldo Carvalho de Melo
171b3be9c4 perf symbol: Move sym_entry->skip to symbol->ignore
While going thru each of the sym_entry fields looking to reduce it to
the set of entries needed when in an active symbols list, 'skip' should
really be in symbol, as we set it when loading the symtab.

And the space used by the basic symbol allocation remains the same as
we had 5 bytes of padding.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-11 13:36:01 -03:00
Arnaldo Carvalho de Melo
878b439dcc perf symbols: Rename dso->origin to dso->symtab_type
And the DSO__ORIG_ enum to SYMTAB__, to clarify that this is about from
where the symtab was obtained.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-11 13:28:45 -03:00
Arnaldo Carvalho de Melo
8b8ba4a9a5 perf top: Remove redundant syme->origin field
We can get it from syme->map->dso->kernel (that should be renamed to
origin, but leave this for another patch).

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-11 13:28:45 -03:00
Arnaldo Carvalho de Melo
ec52d9765a perf top: Remove redundant perf_top->sym_counter
We can get that counter index from perf_top->sym_evsel->idx instead.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-11 13:28:45 -03:00
Arnaldo Carvalho de Melo
1c0b04d10b perf header: Stop using 'self'
Stop using this python/OOP convention, doesn't really helps. Will do
more from time to time till we get it cleaned up in all of tools/perf.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 11:16:28 -03:00
Arnaldo Carvalho de Melo
a91e5431d5 perf session: Use evlist/evsel for managing perf.data attributes
So that we can reuse things like the id to attr lookup routine
(perf_evlist__id2evsel) that uses a hash table instead of the linear
lookup done in the older perf_header_attr routines, etc.

Also to make evsels/evlist more pervasive an API, simplyfing using the
emerging perf lib.

cc: Arun Sharma <arun@sharma-home.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 11:15:54 -03:00
Jiri Olsa
6547250381 perf top: Don't let events to eat up whole header line
Passing multiple events might force out information about pid/tid/cpu.
Attached patch leaves 30 characters for this info at the expense of the
events' names.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Han Pingtian <phan@redhat.com>
LKML-Reference: <1299528821-17521-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 10:55:00 -03:00
Jiri Olsa
b9a46bba88 perf top: Fix events overflow in top command
The snprintf function returns number of printed characters even if it
cross the size parameter. So passing enough events via '-e' parameter
will cause segmentation fault.

It's reproduced by following command:

perf top -e `perf list | grep Tracepoint | awk -F'[' '\
{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];\
for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'`

Attached patch is adding SNPRINTF macro that provides the overflow check
and returns actuall number of printed characters.

Reported-by: Han Pingtian <phan@redhat.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1299528821-17521-2-git-send-email-jolsa@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 10:54:13 -03:00
Lin Ming
7ee235efe5 perf symbols: Avoid resolving [kernel.kallsyms] to real path for buildid cache
kallsyms has a virtual file name [kernel.kallsyms].  Currently, it can't
be added to buildid cache successfully because the code
(build_id_cache__add_s) tries to resolve [kernel.kallsyms] to a real
absolute pathname and that fails.

Fixes it by not resolving it and just use the name [kernel.kallsyms].
So dir ~/.debug/[kernel.kallsyms] is created.

Original bug report at:
https://lkml.org/lkml/2011/3/1/524

Tested-by: Han Pingtian <phan@redhat.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1299165837-27817-1-git-send-email-ming.m.lin@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-09 13:44:10 -03:00
Steven Rostedt
2d01b26a1b ktest: Add STOP_TEST_AFTER to stop the test after a period of time
Currently, if a test causes constant output but never reaches a
boot prompt, or crashes, the test will never stop. Add STOP_TEST_AFTER
to create a variable that will stop (and fail) the test after it has run
for this amount of time. The default is 10 minutes. Setting this
variable to -1 will disable it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-08 09:52:59 -05:00