New drivers / supported parts
* rockchip - rk3066-tsadc variant
* si7020 humidity and temperature sensor
* mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
* bmp280 pressure and temperature sensor
* Qualcomm SPMI PMIC current ADC driver
* Exynos_adc - support exynos7
New features
* vf610-adc - add temperature sensor support
* Documentation of current attributes, scaled pressure, offset and
scaled humidity, RGBC intensity gain factor and scale applied to
differential voltage channels.
* Bring iio_event_monitor up to date with newer modifiers.
* Add of_xlate function to allow for complex channel mappings from the
device tree.
* Add -g parameter to generic_buffer example to allow for devices with
directly fed (no trigger) buffers.
* Move exynos driver over to syscon for PMU register access.
Cleanups, fixes for new drivers
* lis3l02dq drop an unneeded else.
* st sensors - renam st_sensors to st_sensor_settings (for clarity)
* st sensors - drop an unused parameter from all the probe utility
functions.
* vf610 better error handling and tidy up.
* si7020 - cleanups following merge
* as3935 - drop some unnecessary semicolons.
* bmp280 - fix the pressure calculation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=BDOo
-----END PGP SIGNATURE-----
Merge tag 'iio-for-3.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new drivers, features and cleanups for IIO in the 3.19 cycle.
New drivers / supported parts
* rockchip - rk3066-tsadc variant
* si7020 humidity and temperature sensor
* mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
* bmp280 pressure and temperature sensor
* Qualcomm SPMI PMIC current ADC driver
* Exynos_adc - support exynos7
New features
* vf610-adc - add temperature sensor support
* Documentation of current attributes, scaled pressure, offset and
scaled humidity, RGBC intensity gain factor and scale applied to
differential voltage channels.
* Bring iio_event_monitor up to date with newer modifiers.
* Add of_xlate function to allow for complex channel mappings from the
device tree.
* Add -g parameter to generic_buffer example to allow for devices with
directly fed (no trigger) buffers.
* Move exynos driver over to syscon for PMU register access.
Cleanups, fixes for new drivers
* lis3l02dq drop an unneeded else.
* st sensors - renam st_sensors to st_sensor_settings (for clarity)
* st sensors - drop an unused parameter from all the probe utility
functions.
* vf610 better error handling and tidy up.
* si7020 - cleanups following merge
* as3935 - drop some unnecessary semicolons.
* bmp280 - fix the pressure calculation.
This patch adds an entry in ABI documentation for in_voltage-voltage_scale.
It has at least one user driver, adis16220, in accel driver.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
According to the datasheet and as defined in struct bmp280_comp_press, dig_p1 is
of type u16, while dig_p2 to dig_p9 are of type s16. In
bmp280_read_compensation_press(), values read from the device were treated as
the wrong type.
In bmp280_read_press() the fractional part of the measured pressure is
calculated wrong. A better way is to use *val for the raw pressure and *val2 for
the quotient and let the core do the proper conversion using IIO_VAL_FRACTIONAL.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The ADC on exynos7 is quite similar to ADCv2. The differences are as
follows:
- exynos7-adc has 8 input channels (as against 10 in ADCv2).
- exynos7 does not include an ADC PHY control register.
- Some ADC_CON2 register bits being used in ADCv2 are listed as
reserved in exynos7-adc. This results in a different init_hw
function for exynos7.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Instead of using the ADC_PHY register base address, use sysreg phandle
in ADC node to control ADC_PHY configuration register.
This patch adds syscon node for Exynos3250, Exynos4x12, Exynos5250,
and Exynos5420, Exynos5800.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch updates the DT bindings for ADC in exynos-adc.txt with the
syscon phandle to the ADC nodes.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: devicetree@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch updates the IIO based ADC driver to use syscon and regmap
APIs to access and use PMU registers instead of remapping the PMU
registers in the driver.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-iio@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Some IIO devices do not use the triggers. This patch makes trigger setting
conditional so generic_buffer can be used when triggers are disabled.
Signed-off-by: Karol Wrona <k.wrona@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This fixes space related ERROR reports by checkpatch.pl
Generated by $ git ls-files "drivers/staging/rtl8188eu/*.[ch]" | \
xargs ./scripts/checkpatch.pl -f --fix-inplace --strict --types=SPACING
Already checked by text comparasion
$git diff -w
and binary comparasion of r8188eu.ko
$objdiff diff <old_commit> <new_commit>
Signed-off-by: Jia He <hejianet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a more common logging style.
o Convert DEBUG macros to pr_debug
o Add pr_fmt
o Remove embedded function names from pr_debug
o Convert printks to pr_<level>
o Coalesce formats and align arguments
o Add missing terminating newlines
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use normal kernel style, indentation and alignment.
git diff -w shows no difference
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unneeded #define. This was previously included in a patch set
two but patchset one was taken by mistake.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the recently added sample manipulation helpers to remove the hardcoded
assumption of the sample size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This inline helper function has been replaced with comedi_bytes_per_sample().
The same commit (bf33eb4b4f) introduced a couple other related helper
functions a manipulate the sample size.
Use the new helper functions to remove the use of 'bytes_per_sample()' and
remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This member of the private data is replicating what the comedi_async
'cur_chan' member is used for. Use that instead and remove the private
data member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commedi_async 'cur_chan' member is used to track the current position
in the chanlist for a scan. Currently only a couple comedi drivers use
this member.
For aeshtetics, move the 'cur_chan' tracking into the core for non-SDF_PACKED
subdevices. The 'cur_chan' will be updated after reading or writing samples
to the async buffer by comedi_inc_scan_progress(). All non-SDF_PACKED subdevices
will then automatiaclly track the 'cur_chan'.
Some of the drivers use the 'cur_chan' to detect the end of scan event when
counting scans. The COMEDI_CB_EOS event is automatically added by the core
when the end of scan is detected. The drivers just need to check if the
'cur_chan' is 0 to count the number of scans completed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local variable 'range' is set but never used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some unfathomable reason, the Comedi `insn_bits` handler for the
digital output subdevice (`icp_multi_insn_bits_do()`) writes the digital
output register and reads back the unrelated digital input register.
Read back the current state of the outputs (held in `s->state`) instead.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently this driver uses a bitmap in the private data to keep track of
the unipolar/bipolar range for each channel. This is needed to determine
if the data needs to be munged for bipolar samples.
Remove this member from the private data and use the comedi core helper
function comedi_range_is_bipolar() to determine if the data needs to be
munged.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This functions uses the async->cur_chan to determine if the current channel
is using a bipolar range and the sample needs to be munged. The cur_chan is
never incremented so all the samples are munged based on the fist channel
in the cmd->chanlist.
Bump the cur_chan after writing each sample. This fixes the code so that
the munging will be done correctly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core calls comedi_buf_reset() before starting an async command
(*do_cmd) and after returning a subdevice to an idle state (*cancel).
The drivers do not need to reset the async->cur_chan in those functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SDF_READABLE flag is not necessary for digital output subdevices. For
consistency, remove this flag from the comedi drivers that set it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SDF_GROUND, SDF_COMMON, SDF_DIFF, and SDF_OTHER flags are only useful
with the analog input and output subdevices.
Remove these flags from the other subdevice types in the comedi drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As indicated in the comedi.h uapi header, SDF_WRITEABLE was a spelling
error in the API, SDF_WRITABLE is prefered.
For aesthetics, replace all the SDF_WRITEABLE uses with SDF_WRITABLE.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`do_bufinfo_ioctl()` handled the `COMEDI_BUFINFO` ioctl. It is supposed
to update the read or write positions in the buffer depending on the
direction of data transfer set up by the asynchronous command.
Currently it checks the `SDF_CMD_READ` and `SDF_CMD_WRITE` subdevice
flags. That's fine for most subdevices - the ones that only support one
direction, but is incorrect for those subdevices that allow the command
to be set up in either direction. Since we now set the `CMDF_WRITE`
flag according to the data transfer direction of the current command
running on the subdevice, check that flag instead.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`comedi_poll()` handles the poll() file operation for comedi devices.
If no asynchronous command has been set up on the current "read"
subdevice, it sets the `POLLIN` and `POLLRDNORM` bits in the return
value to indicate that the read() file operation would not block as it
would return an error. Add a check so it also does that if the
asynchronous command has been set up in the "write" direction as that
also causes the read() file operation to return an error.
Similarly, if no asynchronous command has need set up on the current
"write" subdevice, it sets the `POLLOUT` and `POLLWRNORM` bits in the
return value to indicate that the write() file operation would not block
as it would return an error. Add a check so it also does that if the
asynchronous command has been set up in the "read" direction as that
also causes the write() file operation to return an error.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a Comedi asynchronous command has been set up for data transfer in
the "read" direction on the current "write" subdevice (for those
subdevices that support both directions), don't allow the "write" file
operation as that would mess with the data in the comedi data buffer
that is written by the low-level comedi hardware driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a Comedi asynchronous command has been set up for data transfer in
the "write" direction on the current "read" subdevice (for those
subdevices that support both directions), don't allow the "read" file
operation as that would mess with the data in the comedi data buffer
that is read by the low-level comedi hardware driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need for `ni_ai_cmdtest()` or `ni_ao_cmdtest()` to set the
`CMDF_WRITE` flag to the correct state as it has already been done by
the core comedi module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The low-level Comedi drivers shouldn't change the `flags` member of
`struct comedi_cmd` as the Comedi core also uses some of those flags.
They should just ignore the flags they don't understand.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most comedi subdevices that support asynchronous commands only support
data transfer in either the "read" or "write" direction, as indicated by
the `SDF_CMD_READ` and `SDF_CMD_WRITE` subdevice flags, although a few
support both directions on the same subdevice (though not
simultaneously). The `struct comedi_cmd` structure passed via ioctl
call to set up the command contains a `CMDF_WRITE` flag that can be used
to choose the direction if the subdevice supports both directions, but
the flag is optional if the subdevice only supports data transfer in one
direction.
If the subdevice only supports asynchronous data transfer in a sing
direction, set the `CMDF_WRITE` flag to the correct state so that Comedi
can make use of it later. In the case of the `COMEDI_CMDTEST` ioctl,
the updated flag will be written back to the `struct comedi_cmd` in
user-space. In the case of the `COMEDI_CMD` ioctl, the flag only gets
written back if an error is detected while testing the command, or if
the `CMDF_BOGUS` command flag is set. Since `__comedi_get_user_cmd()`
is called for both ioctls, that's a good place to set the flag.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) We can tighten up the code a little by returning directly and it
makes the code more future proof and easier to read.
2) "free" is a better name than "exit".
3) sizeof(priv_cmd) is shorter and more clear than sizeof(struct
android_wifi_priv_cmd).
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original code had two bugs:
1) It didn't check if the string was zero length so it could oops when
it tried to dereference the ZERO_SIZE_PTR.
2) It didn't enforce that the string was NUL terminated.
It was also messy as pants.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to forward declare 'struct imx_drm_crtc' because the
"imx-drm.h" header file already includes it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call drm_panel_enable/disable in reaction to encoder_commit
and encoder_disable callbacks.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As long as only IPUv3 is supported in imx-drm, hide the separate
DRM_IMX_IPUV3 option and make DRM_IMX depend on IMX_IPUV3_CORE.
Reported-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the DMA channel is running, it is not allowed to change anything
but the inactive (double) buffer base address, so resizing a plane or
changing to a frame buffer with different pixel format is not possible.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows to update the buffer base address while the DMA
channel is running. It is needed to flip the frame buffer of
an active plane.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
