Instead of each subarch doing its own thing, add an API for queuing an
injection, and manage failed exception injection centerally (i.e., if
an inject failed due to a shadow page fault, we need to requeue it).
Signed-off-by: Avi Kivity <avi@qumranet.com>
The state of SECONDARY_VM_EXEC_CONTROL shouldn't depend on in-kernel IRQ chip,
this patch fix this.
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Ensure that segment.base == segment.selector << 4 when entering the real
mode on Intel so that the CPU will not bark at us. This fixes some old
protected mode demo from http://www.x86.org/articles/pmbasics/tspec_a1_doc.htm.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instead of having each architecture do it individually, we
do this in the arch-independent code (just x86 as of now).
[avi: add svm to the mix, which was added to mainline during the
2.6.24-rc process]
Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This is a little more accurate (since it counts actual reloads, not potential
reloads), and reverses the sense of the statistic to measure a bad event like
most of the other stats (e.g. we want to minimize all counters).
Signed-off-by: Avi Kivity <avi@qumranet.com>
We pass vcpu, vmx->fail, and vmx->launched to assembly code, but all three
are fields within vmx. Consolidate by only passing in vmx and offsets for
the rest.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Will be called once arch module registers itself.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Add wbinvd VM Exit support to prepare for pass-through
device cache emulation and also enhance real time
responsiveness.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
If vmx fails to inject a real-mode interrupt while fetching the interrupt
redirection table, it fails to record this in the vectoring information
field. So we detect this condition and do it ourselves.
Signed-off-by: Avi Kivity <avi@qumranet.com>
We'll want to write to it in order to fix real-mode irq injection problems,
but it is a read-only field. Storing it in a variable solves that issue.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instead of injecting real-mode interrupts by writing the interrupt frame into
guest memory, abuse vmx by injecting a software interrupt. We need to
pretend the software interrupt instruction had a length > 0, so we have to
adjust rip backward.
This lets us not to mess with writing guest memory, which is complex and also
sleeps.
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch based on CR8/TPR patch, and enable the TPR shadow (FlexPriority)
for 32bit Windows. Since TPR is accessed very frequently by 32bit
Windows, especially SMP guest, with FlexPriority enabled, we saw significant
performance gain.
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The code that dispatches the page fault and emulates if we failed to map
is duplicated across vmx and svm. Merge it to simplify further bugfixing.
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of intel i386.
* Original code saves following registers:
eax, ebx, ecx, edx, edi, esi, ebp (using popa)
* Patched code:
- informs GCC that we modify following registers
using the clobber description:
ebx, edi, rsi
- doesn't save eax because it is an output operand (vmx->fail)
- cannot put ecx in clobber description because it is an input operand,
but as we modify it and we want to keep its value (vcpu), we must
save it (pop/push)
- ebp is saved (pop/push) because GCC seems to ignore its use the clobber
description.
- edx is saved (pop/push) because it is reserved by GCC (REGPARM) and
cannot be put in the clobber description.
- line "mov (%%esp), %3 \n\t" has been removed because %3
is ecx and ecx is restored just after.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of intel x86_64.
* Original code saves following registers:
rax, rbx, rcx, rdx, rsi, rdi, rbp,
r8, r9, r10, r11, r12, r13, r14, r15
* Patched code:
- informs GCC that we modify following registers
using the clobber description:
rbx, rdi, rsi,
r8, r9, r10, r11, r12, r13, r14, r15
- doesn't save rax because it is an output operand (vmx->fail)
- cannot put rcx in clobber description because it is an input operand,
but as we modify it and we want to keep its value (vcpu), we must
save it (pop/push)
- rbp is saved (pop/push) because GCC seems to ignore its use in the clobber
description.
- rdx is saved (pop/push) because it is reserved by GCC (REGPARM) and
cannot be put in the clobber description.
- line "mov (%%rsp), %3 \n\t" has been removed because %3
is rcx and rcx is restored just after.
- line ASM_VMX_VMWRITE_RSP_RDX() is moved out of the ifdef/else/endif
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Currently kvm has a wart in that it requires three extra pages for use
as a tss when emulating real mode on Intel. This patch moves the allocation
internally, only requiring userspace to tell us where in the physical address
space we can place the tss.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Split guest reset code out of vmx_vcpu_setup(). Besides being cleaner, this
moves the realmode tss setup (which can sleep) outside vmx_vcpu_setup()
(which is executed with preemption enabled).
[izik: remove unused variable]
Signed-off-by: Avi Kivity <avi@qumranet.com>
First step to split kvm_vcpu. Currently, we just use an macro to define
the common fields in kvm_vcpu for all archs, and all archs need to define
its own kvm_vcpu struct.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Beside the obvious goodness of making code more common, this prevents
a livelock with the next patch which moves interrupt injection out of the
critical section.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Move kvm_create_lapic() into kvm_vcpu_init(), rather than having svm
and vmx do it. And make it return the error rather than a fairly
random -ENOMEM.
This also solves the problem that neither svm.c nor vmx.c actually
handles the error path properly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Now that smp_call_function_single() knows how to call a function on the
current cpu, there's no need to check explicitly.
Signed-off-by: Avi Kivity <avi@qumranet.com>
There are two classes of page faults trapped by kvm:
- host page faults, where the fault is needed to allow kvm to install
the shadow pte or update the guest accessed and dirty bits
- guest page faults, where the guest has faulted and kvm simply injects
the fault back into the guest to handle
The second class, guest page faults, is pure overhead. We can eliminate
some of it on vmx using the following evil trick:
- when we set up a shadow page table entry, if the corresponding guest pte
is not present, set up the shadow pte as not present
- if the guest pte _is_ present, mark the shadow pte as present but also
set one of the reserved bits in the shadow pte
- tell the vmx hardware not to trap faults which have the present bit clear
With this, normal page-not-present faults go directly to the guest,
bypassing kvm entirely.
Unfortunately, this trick only works on Intel hardware, as AMD lacks a
way to discriminate among page faults based on error code. It is also
a little risky since it uses reserved bits which might become unreserved
in the future, so a module parameter is provided to disable it.
Signed-off-by: Avi Kivity <avi@qumranet.com>
KVM avoids reloading the efer msr when the difference between the guest
and host values consist of the long mode bits (which are switched by
hardware) and the NX bit (which is emulated by the KVM MMU).
This patch also allows KVM to ignore SCE (syscall enable) when the guest
is running in 32-bit mode. This is because the syscall instruction is
not available in 32-bit mode on Intel processors, so the SCE bit is
effectively meaningless.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Move emulate_ctxt to kvm_vcpu to keep emulate context when we exit from kvm
module. Call x86_decode_insn() only when needed. Modify x86_emulate_insn() to
not modify the context if it must be re-entered.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch refactors the current hypercall infrastructure to better
support live migration and SMP. It eliminates the hypercall page by
trapping the UD exception that would occur if you used the wrong hypercall
instruction for the underlying architecture and replacing it with the right
one lazily.
A fall-out of this patch is that the unhandled hypercalls no longer trap to
userspace. There is very little reason though to use a hypercall to
communicate with userspace as PIO or MMIO can be used. There is no code
in tree that uses userspace hypercalls.
[avi: fix #ud injection on vmx]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
There's no need for the *_MASK flags (TF_MASK, IF_MASK, etc), found in
processor.h (both _32 and _64). They have a one-to-one mapping with the
EFLAGS value. This patch removes the definitions, and use the already
existent X86_EFLAGS_ version when applicable.
[ roland@redhat.com: KVM build fixes. ]
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Resetting an SMP guest will force AP enter real mode (RESET) with
paging enabled in protected mode. While current enter_rmode() can
only handle mode switch from nonpaging mode to real mode which leads
to SMP reboot failure.
Fix by reloading the mmu context on entering real mode.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This makes sure we handle NMI on the current cpu, and that we don't service
maskable interrupts before non-maskable ones.
Signed-off-by: Avi Kivity <avi@qumranet.com>
According to Intel Software Developer's Manual, Vol. 3B, Appendix H.4.2,
exit qualification should be of natural width. However, current code
uses u64 as the data type for this register, which occasionally
introduces invalid value to VMExit handling logics. This patch fixes
this bug.
I have tested Windows and Linux guest on i386 host, and they can boot
successfully with this patch.
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch just renames the current (misnamed) _arch namings to _x86 to
ensure better readability when a real arch layer takes place.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch enables INIT/SIPI handling using in-kernel APIC by
introducing a ->mp_state field to emulate the SMP state transition.
[avi: remove smp_processor_id() warning]
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Xin Li <xin.b.li@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This reduces overhead by accessing cachelines from the wrong node, as well
as simplifying locking.
[Qing: fix for inactive or expired one-shot timer]
Signed-off-by: Yaozu (Eddie) Dong <Eddie.Dong@intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
APIC timer IRQ is set every time when a certain period
expires at host time, but the guest may be descheduled
at that time and thus the irq be overwritten by later fire.
This patch keep track of firing irq numbers and decrease
only when the IRQ is injected to guest or buffered in
APIC.
Signed-off-by: Yaozu (Eddie) Dong <Eddie.Dong@intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch enables TPR shadow of VMX on CR8 access. 64bit Windows using
CR8 access TPR frequently. The TPR shadow can improve the performance of
access TPR by not causing vmexit.
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
By sleeping in the kernel when hlt is executed, we simplify the in-kernel
guest interrupt path considerably.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Because lightweight exits (exits which don't involve userspace) are many
times faster than heavyweight exits, it makes sense to emulate high usage
devices in the kernel. The local APIC is one such device, especially for
Windows and for SMP, so we add an APIC model to kvm.
It also allows in-kernel host-side drivers to inject interrupts without
going through userspace.
[compile fix on i386 from Jindrich Makovicka]
Signed-off-by: Yaozu (Eddie) Dong <Eddie.Dong@intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch is to wrap APIC base register and CR8 operation which can
provide a unique API for user level irqchip and kernel irqchip.
This is a preparation of merging lapic/ioapic patch.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
vmx_load_host_state() bundles fs, gs, ldt, and tss reloading into
one in the hope that it is infrequent. With smp guests, fs reloading is
frequent due to fs being used by threads.
Unbundle the reloads so reduce expensive gs reloads.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
