Commit graph

446 commits

Author SHA1 Message Date
Greg Kroah-Hartman
c60b717879 kset: convert ocfs2 to use kset_create
Dynamically create the kset instead of declaring it statically.

Also use the new kobj_attribute which cleans up this file a _lot_.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:23 -08:00
Greg Kroah-Hartman
3514faca19 kobject: remove struct kobj_type from struct kset
We don't need a "default" ktype for a kset.  We should set this
explicitly every time for each kset.  This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.

This patch is based on a lot of help from Kay Sievers.

Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:10 -08:00
Mark Fasheh
e8aed3450c ocfs2: Re-journal buffers after transaction extend
ocfs2_extend_trans() might call journal_restart() which will commit dirty
buffers and then restart the transaction. This means that any buffers which
still need changes should be passed to journal_access() again. Some paths
during extend weren't doing this right.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-17 10:51:23 -08:00
Mark Fasheh
0879c584ff ocfs2: Allow for debugging of transaction extends
The nastiest cases of transaction extends are also the rarest. We can expose
them more quickly at the expense of performance by going straight to the
journal_restart() in ocfs2_extend_trans(). Wrap things in OCFS2_DEBUG_FS so
that we only do this when "expensive debugging" is turned on.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-17 10:51:14 -08:00
Mark Fasheh
92295d8054 ocfs2: Don't panic when truncating an empty extent
This BUG_ON() was unintentionally left in after the sparse file support was
written.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-17 10:51:04 -08:00
Mark Fasheh
a86370fbb6 ocfs2: fix exit-while-locked bug in ocfs2_queue_orphans()
We're holding the cluster lock when a failure might happen in
ocfs2_dir_foreach() so it needs to be released.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-12-17 10:49:43 -08:00
Al Viro
97bd7919e2 remove nonsense force-casts from ocfs2
endianness annotations in networking code had been in place for quite a
while; in particular, sin_port and s_addr are annotated as big-endian.

Code in ocfs2 had __force casts added apparently to shut the sparse
warnings up; of course, these days they only serve to *produce* warnings
for no reason whatsoever...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:25:20 -08:00
Mark Fasheh
b1967d0edd ocfs2: reverse inline-data truncate args
ocfs2_truncate() and ocfs2_remove_inode_range() had reversed their "set
i_size" arguments to ocfs2_truncate_inline(). Fix things so that truncate
sets i_size, and punching a hole ignores it.

This exposed a problem where punching a hole in an inline-data file wasn't
updating the page cache, so fix that too.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27 16:47:03 -08:00
Mark Fasheh
0d8a4e0cd6 ocfs2: Fix comparison in ocfs2_size_fits_inline_data()
This was causing us to prematurely push out inline data by one byte.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27 16:47:03 -08:00
Mark Fasheh
bccb9dad89 ocfs2: Remove bug statement in ocfs2_dentry_iput()
The existing bug statement didn't take into account unhashed dentries which
might not have a cluster lock on them. This could happen if a node exporting
the file system via NFS is rebooted, re-exported to nfs clients and then
unmounted. It's fine in this case to not have a dentry cluster lock.

Just remove the bug statement and replace it with an error print, which
does the proper checks. Though we want to know if something has happened
which might have prevented a cluster lock from being created, it's
definitely not necessary to panic the machine for this.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27 16:47:02 -08:00
Jan Kara
5a58c3ef22 [PATCH] ocfs2: Remove expensive bitmap scanning
Enable expensive bitmap scanning only if DEBUG option is enabled.
The bitmap scanning quite loads the CPU and on my machine the write
throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync
improves from 37 MB/s to 45.4 MB/s in local mode...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27 16:47:02 -08:00
Mark Fasheh
a46043e08f ocfs2: log valid inode # on bad inode
If the inode block isn't valid then we don't want to print the value from
that, instead print the block number which was passed in (which should
always be correct). Also, turn this into a debug print for now - folks who
hit an actual problem always have other logs indicating what the source is.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27 16:47:02 -08:00
Mark Fasheh
ef9f86ceb6 ocfs2: Filter -ENOSPC in mlog_errno()
It's almost never worth printing in that situation and we keep forgetting to
manually filter it out.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27 16:47:01 -08:00
Joe Perches
2759236f84 [PATCH] fs/ocfs2: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27 16:47:01 -08:00
Mark Fasheh
e001e796e4 ocfs2: Reset journal parameters after s_mount_opt update
Right now we're just setting them from the existing parameters, not the
new ones that a remount specified.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27 16:47:01 -08:00
Trond Myklebust
91cf45f02a [NET]: Add the helper kernel_sock_shutdown()
...and fix a couple of bugs in the NBD, CIFS and OCFS2 socket handlers.

Looking at the sock->op->shutdown() handlers, it looks as if all of them
take a SHUT_RD/SHUT_WR/SHUT_RDWR argument instead of the
RCV_SHUTDOWN/SEND_SHUTDOWN arguments.
Add a helper, and then define the SHUT_* enum to ensure that kernel users
of shutdown() don't get confused.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Mark Fasheh <mark.fasheh@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 18:10:39 -08:00
Srinivas Eeda
e325a88f17 ocfs2: fix rename vs unlink race
If another node unlinks the destination while ocfs2_rename() is waiting on a
cluster lock, ocfs2_rename() simply logs an error and continues. This causes
a crash because the renaming node is now trying to delete a non-existent
inode. The correct solution is to return -ENOENT.

Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-06 15:35:40 -08:00
Jan Kara
bc7e97cbdd [PATCH] Fix possibly too long write in o2hb_setup_one_bio()
We should subtract start of our IO from PAGE_CACHE_SIZE to get the right
length of the write we want to perform.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-06 15:35:35 -08:00
Mark Fasheh
4e9563fd55 ocfs2: fix write() performance regression
On file systems which don't support sparse files, Ocfs2_map_page_blocks()
was reading blocks on appending writes. This caused write performance to
suffer dramatically. Fix this by detecting an appending write on a nonsparse
fs and skipping the read.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-06 15:35:29 -08:00
Mark Fasheh
9ea2d32f40 ocfs2: Commit journal on sync writes
We're missing a meta data commit for extending sync writes. In thoery, write
could return with the meta data required to read the data uncommitted to
disk. Fix that by detecting an allocating write and forcing a journal commit
in the sync case.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-06 15:32:00 -08:00
Mark Fasheh
9f70968af3 ocfs2: Re-order iput in ocfs2_drop_dentry_lock
Do this to avoid a theoretical (I haven't seen this in practice) race where
the downconvert thread might drop the dentry lock, allowing a remote unlink
to proceed before dropping the inode locks. This could bounce access to the
orphan dir between nodes.

There doesn't seem to be a need to do the same in ocfs2_dentry_iput() as
that's never called for the last ref drop from the downconvert thread.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-06 15:31:52 -08:00
Mark Fasheh
019d1b2247 ocfs2: Create locks at initially requested level
If we have not yet created a cluster lock, ocfs2_cluster_lock() will
first create it at NLMODE, and then convert the lock to either PRMODE or
EXMODE (whichever is requested).

Change ocfs2_cluster_lock() to just create the lock at the initially
requested level. ocfs2_locking_ast() handles this case fine, so the only
update required was in setup of locking state. This should reduce the number
of network messages required for a new lock by one, providing an incremental
performance enhancement.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-06 15:31:45 -08:00
Roel Kluin
3cf0c507dd [PATCH] Fix priority mistakes in fs/ocfs2/{alloc.c, dlmglue.c}
Fixes priority mistakes similar to '!x & y'

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-06 15:31:39 -08:00
Adrian Bunk
0af4bd3887 [2.6 patch] make ocfs2_find_entry_el() static
ocfs2_find_entry_el() can become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-06 15:31:06 -08:00
Christoph Hellwig
3965516440 exportfs: make struct export_operations const
Now that nfsd has stopped writing to the find_exported_dentry member we an
mark the export_operations const

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: David Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:21 -07:00
Christoph Hellwig
644f9ab3b0 ocfs2: new export ops
OCFS2 has it's own 64bit-firendly filehandle format so we can't use the
generic helpers here.  I'll add a struct for the types later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:20 -07:00
Robert P. J. Day
3a4fa0a25d Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:10:43 +02:00
Pavel Emelyanov
ba25f9dcc4 Use helpers to obtain task pid in printks
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Mathieu Desnoyers
2b47c3611d Fix f_version type: should be u64 instead of unsigned long
Fix f_version type: should be u64 instead of long

There is a type inconsistency between struct inode i_version and struct file
f_version.

fs.h:

struct inode
  u64                     i_version;

and

struct file
  unsigned long           f_version;

Users do:

fs/ext3/dir.c:

if (filp->f_version != inode->i_version) {

So why isn't f_version a u64 ? It becomes a problem if versions gets
higher than 2^32 and we are on an architecture where longs are 32 bits.

This patch changes the f_version type to u64, and updates the users accordingly.

It applies to 2.6.23-rc2-mm2.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Martin Bligh <mbligh@google.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: <linux-ext4@vger.kernel.org>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:53 -07:00
Christoph Lameter
4ba9b9d0ba Slab API: remove useless ctor parameter and reorder parameters
Slab constructors currently have a flags parameter that is never used.  And
the order of the arguments is opposite to other slab functions.  The object
pointer is placed before the kmem_cache pointer.

Convert

        ctor(void *object, struct kmem_cache *s, unsigned long flags)

to

        ctor(struct kmem_cache *s, void *object)

throughout the kernel

[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
Peter Zijlstra
e0bf68ddec mm: bdi init hooks
provide BDI constructor/destructor hooks

[akpm@linux-foundation.org: compile fix]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
Nick Piggin
b6af1bcd87 ocfs2: convert to new aops
Plug ocfs2 into the ->write_begin and ->write_end aops.

A bunch of custom code is now gone - the iovec iteration stuff during write
and the ocfs2 splice write actor.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:58 -07:00
Linus Torvalds
efefc6eb38 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits)
  PM: merge device power-management source files
  sysfs: add copyrights
  kobject: update the copyrights
  kset: add some kerneldoc to help describe what these strange things are
  Driver core: rename ktype_edd and ktype_efivar
  Driver core: rename ktype_driver
  Driver core: rename ktype_device
  Driver core: rename ktype_class
  driver core: remove subsystem_init()
  sysfs: move sysfs file poll implementation to sysfs_open_dirent
  sysfs: implement sysfs_open_dirent
  sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir
  sysfs: make sysfs_root a regular directory dirent
  sysfs: open code sysfs_attach_dentry()
  sysfs: make s_elem an anonymous union
  sysfs: make bin attr open get active reference of parent too
  sysfs: kill unnecessary NULL pointer check in sysfs_release()
  sysfs: kill unnecessary sysfs_get() in open paths
  sysfs: reposition sysfs_dirent->s_mode.
  sysfs: kill sysfs_update_file()
  ...
2007-10-12 15:49:37 -07:00
Greg Kroah-Hartman
34980ca8fa Drivers: clean up direct setting of the name of a kset
A kset should not have its name set directly, so dynamically set the
name at runtime.

This is needed to remove the static array in the kobject structure which
will be changed in a future patch.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:02 -07:00
Mark Fasheh
e7b3401960 ocfs2: Optionally return filldir errors
Modify ocfs2_dir_foreach_blk() to optionally return any error from the
filldir callback. This way ocfs2_dirforeach() can terminate early, as
opposed to always passing through the entire directory. This fixes a bug
introduced during a previous code refactor where ocfs2_empty_dir() would
loop infinitely.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-10-12 11:54:41 -07:00
Mark Fasheh
5b6a3a2b4a ocfs2: Write support for directories with inline data
Create all new directories with OCFS2_INLINE_DATA_FL and the inline data
bytes formatted as an empty directory. Inode size field reflects the actual
amount of inline data available, which makes searching for dirent space
very similar to the regular directory search.

Inline-data directories are automatically pushed out to extents on any
insert request which is too large for the available space.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:41 -07:00
Mark Fasheh
23193e513d ocfs2: Read support for directories with inline data
This splits out extent based directory read support and implements
inline-data versions of those functions. All knowledge of inline-data versus
extent based directories is internalized. For lookups the code uses
ocfs2_find_entry_id(), full dir iterations make use of
ocfs2_dir_foreach_blk_id().

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:40 -07:00
Mark Fasheh
1afc32b952 ocfs2: Write support for inline data
This fixes up write, truncate, mmap, and RESVSP/UNRESVP to understand inline
inode data.

For the most part, the changes to the core write code can be relied on to do
the heavy lifting. Any code calling ocfs2_write_begin (including shared
writeable mmap) can count on it doing the right thing with respect to
growing inline data to an extent tree.

Size reducing truncates, including UNRESVP can simply zero that portion of
the inode block being removed. Size increasing truncatesm, including RESVP
have to be a little bit smarter and grow the inode to an extent tree if
necessary.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:40 -07:00
Mark Fasheh
6798d35a31 ocfs2: Read support for inline data
This hooks up ocfs2_readpage() to populate a page with data from an inode
block. Direct IO reads from inline data are modified to fall back to
buffered I/O. Appropriate checks are also placed in the extent map code to
avoid reading an extent list when inline data might be stored.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:39 -07:00
Mark Fasheh
15b1e36bdb ocfs2: Structure updates for inline data
Add the disk, network and memory structures needed to support data in inode.

Struct ocfs2_inline_data is defined and embedded in ocfs2_dinode for storing
inline data.

A new inode field, i_dyn_features, is added to facilitate tracking of
dynamic inode state. Since it will be used often, we want to mirror it on
ocfs2_inode_info, and transfer it via the meta data lvb.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:39 -07:00
Mark Fasheh
8553cf4f36 ocfs2: Cleanup dirent size check
The check to see if a new dirent would fit in an old one is pretty ugly, and
it's done at least twice. Clean things up by putting this in it's own
easier-to-read function.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:39 -07:00
Mark Fasheh
38760e2432 ocfs2: Rename cleanups
ocfs2_rename() does direct manipulation of the dirent it's gotten back from
a directory search. Wrap this manipulation inside of a function so that we
can transparently change directory update behavior in the future. As an
added bonus, this gets rid of an ugly macro.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:38 -07:00
Mark Fasheh
be94d11704 ocfs2: Provide convenience function for ino lookup
A couple paths which needed to just match a parent dir + name pair to an
inode number were a bit messy because they had to deal with
ocfs2_find_files_on_disk() which returns a larger number of values. Provide
a convenience function, ocfs2_lookup_ino_from_name() which internalizes all
the extra accounting.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:38 -07:00
Mark Fasheh
0bfbbf62a8 ocfs2: Implement ocfs2_empty_dir() as a caller of ocfs2_dir_foreach()
We can preserve the behavior of ocfs2_empty_dir(), while getting rid of the
open coded directory walk by just providing a smart filldir callback. This
also automatically gets to use the dir readahead code, though in this case
any advantage is minor at best.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:37 -07:00
Mark Fasheh
5eae5b96fc ocfs2: Remove open coded readdir()
ocfs2_queue_orphans() has an open coded readdir loop which can easily just
use a directory accessor function.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:37 -07:00
Mark Fasheh
7e8536797d ocfs2: Pass raw u64 to filldir
filldir_t can take this, so don't turn de->inode into a 32 bit value. Right
now this doesn't make a difference since no ocfs2 inodes overflow that, but
it could be a nasty surprise later on if some kernel code is calling
ocfs2_dir_foreach_blk() and expecting real inode numbers back...

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:37 -07:00
Mark Fasheh
b8bc5f4fde ocfs2: Abstract out core dir listing functionality
Put this in it's own function so that the functionality can be overridden.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:36 -07:00
Mark Fasheh
316f4b9f98 ocfs2: Move directory manipulation code into dir.c
The code for adding, removing, deleting directory entries was splattered all
over namei.c. I'd rather have this all centralized, so that it's easier to
make changes for inline dir data, and eventually indexed directories.

None of the code in any of the functions was changed. I only removed the
static keyword from some prototypes so that they could be exported.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:36 -07:00
Mark Fasheh
1d410a6e33 ocfs2: Small refactor of truncate zeroing code
We'll want to reuse most of this when pushing inline data back out to an
extent. Keeping this part as a seperate patch helps to keep the upcoming
changes for write support uncluttered.

The core portion of ocfs2_zero_cluster_pages() responsible for making sure a
page is mapped and properly dirtied is abstracted out into it's own
function, ocfs2_map_and_dirty_page(). Actual functionality doesn't change,
though zeroing becomes optional.

We also turn part of ocfs2_free_write_ctxt() into  a common function for
unlocking and freeing a page array. This operation is very common (and
uniform) for Ocfs2 cluster sizes greater than page size, so it makes sense
to keep the code in one place.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:35 -07:00
Mark Fasheh
65ed39d6ca ocfs2: move nonsparse hole-filling into ocfs2_write_begin()
By doing this, we can remove any higher level logic which has to have
knowledge of btree functionality - any callers of ocfs2_write_begin() can
now expect it to do anything necessary to prepare the inode for new data.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-10-12 11:54:35 -07:00