Add digital support for the Pinnacle PCTV HD Pro 801e (usb id 2304:023a)
Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new
firmware fixing the issue with the i2c that prevented the xc5000 from working.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch introduces support for dvb-t for the following dibcom based
cards: Asus My Cinema U3000 Hybrid (USB-ID: 0b05:1736)
Signed-off-by: Albert Comerma <albert.comerma@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch extends the dib0700 driver to support the DVB-part of the Asus notebook M51Sn tv-tunner (USB-ID 1164:1f08).
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As reported by BOUWSMA Barry the readout of the signal status doesn't work
on dec3000-s models. Since we don't know how to do it better, revert back
to the old behaviour and always report a signal lock.
Reported by Barry Bouwsma
Signed-off-by: Peter Beutner <p.beutner@gmx.net>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The Pinnacle PCTV HD Pro has an xc5000, which exposed a bug in the dib0700's
i2c implementation where it did not properly support a single i2c read request
(sending it as an i2c write request instead). Version 1.20 of the firmware
added support for a new i2c API which supported such requests.
This change defaults to fw 1.20 for all devices, but does not default to using
the new i2c API (since initial testing suggests problems interacting with the
mt2060). Maintainers can enable the use of the new i2c API by putting
the following into their frontend initialization:
struct dib0700_state *st = adap->dev->priv;
st->fw_use_new_i2c_api = 1;
Also note that the code expects i2c repeated start to be supported. If the
i2c slave does not support repeated start, i2c messsages should have the
I2C_M_NOSTART flag set.
Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new
firmware fixing the issue as well as example i2c code utilizing the interface.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Thanks to Ilia Penev for the tip-off that this device is much the same as
(identical to?) a Terratec Cinergy HT USB XE, and for the firmware hints:
http://linuxtv.org/pipermail/linux-dvb/2008-August/028108.html
DVB functionality tested OK with xine using the usual dib0700 firmware.
This diff is based on the latest latest linuxtv.org v4l-dvb mercurial
repo.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Auto-update controls are never marked is loaded to prevent uvc_get_ctrl from
loading the control value from the cache. When setting a composite (mapped to
several V4L2 controls) auto-update UVC control, the driver updates the control
cache value before processing each V4L2 control, overwriting the previously
set V4L2 control.
This fixes the problem by marking all controls as loaded in uvc_set_ctrl
regardless of their type and resetting the loaded flag in uvc_commit_ctrl for
auto-update controls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This declares all missing UVC camera and processing unit controls. V4L2
mappings are not supported yet for those controls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
instead of register_chrdev", the internal reference count is no longer
necessary in order to free the internal stk_webcam struct. This patch
removes the reference counter from the stk_webcam struct and frees the
struct via the video_device release callback. It also fixes an
associated bug in stk_camera_probe which could result from
video_unregister_device being called before video_register_device.
Lastly, it simplifies access to the stk_webcam struct in several
places. This patch should apply cleanly against the "working" branch
of the v4l-dvb git repository.
This patch is identical to the patch I sent a couple of months back
titled "stk-webcam: Fix video_device handling" except that it has been
rebased against current modifications to stk-webcam and it no longer
depends on any other outstanding patches.
Acked-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: David Ellingsworth <david@identd.dyndns.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/tda9840.c: In function 'tda9840_command':
drivers/media/video/tda9840.c:152: warning: 'result' is used uninitialized in this function
[mchehab@redhat.com: Fix conflict with another patch that were meant to solve the warning]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The status[] is part of uvc_device structure. We can't make sure
the address of status is at a cache-line boundary in all archs,so
status[] might share a cache-line with some fields in uvc_structure.
This can lead to some cache coherence issues(http://lwn.net/Articles/2265/).
Use dynamically allocated buffer instead.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When streaming in a fixed size format the driver sets a flag in the uvc_queue
structure to drop incomplete incoming frames. The flag wasn't cleared when
switching to a variable size format, which resulted in a broken
'MJPEG after YUV'.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for ST STV0288 demodulator and cards with it,
such as TeVii S420.
Patch is co-authored with Georg Acher <acher@baycom.de>
Signed-off-by: Georg Acher <acher@baycom.de>
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We don't want to push the ISDB-T definitions into the kernel until
we have a high level of confidence in the ISDB-T API. More testing
is required before this code is released.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Added support for TBS 8920 DVB-S/S2 card. The card
based on cx24116 demodulator.
Signed-off-by: Oleg Roitburd <oroitburd@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Added support for Omicom SS4 DVB-S/S2 card. The card
based on cx24116 demodulator.
Signed-off-by: Oleg Roitburd <oroitburd@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for USB card modification with SI2109/2110 demodulator.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for Silicon Laboratories SI2109/2110 demodulator
and cards with it, such as DvbWorld PCI2002.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
From the author:
This patch-set fixes remote control issues I have experienced
with hauppauge drivers in Linux since the PVR-350 and now
with both a NOVA-S+ and HVR-4000. It has also been confirmed
to work with an HVR-1300 user who had exactly the same issue.
Hauppage remote controls use RC5. RC5 has a bit-field which
represents the target device. The hauppauge windows drivers
have a registry key which can enable filtering, but the linux
drivers will accept any target device in this bit field for
internal processing.
This causes problems with setups such as mythtv where remote
control key presses destined for the TV (target = 0) are
interpreted by the kernel and subsequenctly LIRC then mythtv.
Of the remote controls I have to hand (wintv black, pvr/hvr
silver) the hauppauge remotes send one of two device targets
ids, these are interpreted by the patch which then filters
out any non hauppauge addresses.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
From the author:
Here is a simple patch detailing some reverse engineered
register detail lost in my latest merge. The comments
in the code refer to this register but it is never
defined. This corrects this.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adjust MPEG initialization in cx24116 in order to accomodate different
MPEG CLK position and polarity in different cards. For example, HVR4000
uses 0x02 value, but DvbWorld & TeVii USB cards uses 0x01. Without it MPEG
stream was broken on that cards for symbol rates > 30000 kSyms/s.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove the debugging sysctls.
Rolloff was broken, not it works as expected and has been tested in kaffeine.
Power related changes for the isl6421 are not implemented on the HVR4000/4000LITE.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for DvbWorld 2004 DVB-S2 PCI adapter.
The card contains dm1105 PCI chip and cx24116 demodulator
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
I was given these changes by Darron Broad and Igor Liplianin and represent a series
of patches they've been making to the cx24116 driver over the last two years.
Changes for handling symbolrates >30Ksps
Tone handling changes.
Diseqc support.
Sleep support, shutting down the clocks correctly.
Cleanup on ROLL_OFF and PILOT support.
*** ST - We need to cleanup the sysclt control, this is abnormal
in a demod driver. We should work towards understanding the missing
API's and ensure we have them in S2API. ***
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for SDMC DM1105 PCI chip. There is a lot of
cards based on it, like DvbWorld 2002 DVB-S , 2004 DVB-S2
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Many thanks to Darron Broad for pointing out the obvious.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Also added some compat code for the older API.
Added more ISDB message/command suggestions, current not connected in dvb-core.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The frontends will be notified (if they chose) of all _get and _set commands
so they can help determine result or action. Results are now returned
to userspace correctly.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The API now assumes that ioctl calls for FE_SET_PROPERTY and all
set commands, and FE_GET_PROPERTY are get commands.
Simplification.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This helps complex demods which support different modulation types
be better informed.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
For demod drivers, we want a single tuning function (set_frontend) to have
access to the properly constructed dvb_frontend_parameters structure, or
the cache values - regardless of whether the legacy or new API is being used.
This cuts down on redundant code in the demod drivers and ensures the
tuning parameters are consistent regardless of the API entry type.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
After discussion the following changes were made:
1. Removed the typedefs in frontend.h, use structures.
2. In the frontend.h, remove the 16 command limit on the API and
switch to a flexible variable length API. For practical reasons
a #define limits this to 64, this should be discussed.
3. Changed dvb-core ioctl handing to deal with variable sequences
of commands.
tune-v0.0.3.c is required to use this API, it contains the interface changes.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The group preferred dtv_ over tv_, this implements it.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adjust MPEG initialization in cx24116 in order to accomodate different
MPEG CLK position and polarity in different cards.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cx24116: Fix lock for high (above 30000 kSyms) symbol rates
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Change menu item in Kconfig for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Added support for DVBWorld 2104 and TeVii S650 USB DVB-S2 cards
This cards based on cx24116 demodulator.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
