Commit graph

163766 commits

Author SHA1 Message Date
Paul Fertser
ed52e62ebe mfd: use a dedicated workqueue for pcf50633 irq processing
Using the default kernel "events" workqueue causes problems with
synchronous adc readings if initiated from some task on the same
workqueue.

I had a deadlock trying to use pcf50633_adc_sync_read from a
power_supply class driver because the reading was initiated from the
workqueue and it waited for the irq processing to complete (to get the
result) and that was put on the same workqueue.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:53 +02:00
Felipe Balbi
9c3664ddce mfd: Add twl4030-pwrbutton as a twl4030 child
Make that twl4030-pwrbutton.c driver probe with current
child creation api for twl4030.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:52 +02:00
Mark Brown
fb6c023a2b hwmon: Add WM835x PMIC hardware monitoring driver
This driver provides reporting of the status supply voltage rails
of the WM835x series of PMICs via the hwmon API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:51 +02:00
Daniel Ribeiro
39b1772a24 regulator: add pcap driver
Add (partial) support for the voltage regulators on the PCAP2 PMIC.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:49 +02:00
Mark Brown
b75ea16ae7 MAINTAINERS: Add entry for Wolfson PMIC drivers
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:49 +02:00
Joe Perches
df10d6465f mfd: remove unnecessary semicolons from twl4030
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:48 +02:00
Daniel Ribeiro
e9a22635b0 mfd: add ezx_pcap_setbits
Provides an atomic set_bits functions, as needed by the pcap-regulator
driver.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:47 +02:00
Daniel Ribeiro
b1148fd46c mfd: fix pcap irq bottom handler
Mask interrupts before servicing them and loop while pcap asserts the interrupt
line.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:47 +02:00
Daniel Ribeiro
ecd78cbdb9 mfd: add set_ts_bits for pcap
Some TS controller bits are on the same register as the ADC control, save
TS specific bits and export a set_ts_bits function so the TS driver can set
it with the adc_mutex lock held.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:46 +02:00
Daniel Ribeiro
9f7b07d6cc mfd: Introduce irq_to_pcap()
Export an irq_to_pcap function to get pcap irq number, for the keypad driver.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:45 +02:00
Samuel Ortiz
dfc3aa7221 mfd: fix ab3100 warning on x86_64
The file_operations write prototype should return a ssize_t.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17 09:46:42 +02:00
Kuninori Morimoto
064a16dc41 sh: mach-ecovec24: Add user debug switch support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-17 15:07:00 +09:00
Chen Liqin
9973affe9b score: add TIF_NOTIFY_RESUME define in asm/thread_info.h 2009-09-17 12:05:56 +08:00
Hendrik Brueckner
bf95d20fdb af_iucv: fix race when queueing skbs on the backlog queue
iucv_sock_recvmsg() and iucv_process_message()/iucv_fragment_skb race
for dequeuing an skb from the backlog queue.

If iucv_sock_recvmsg() dequeues first, iucv_process_message() calls
sock_queue_rcv_skb() with an skb that is NULL.

This results in the following kernel panic:

<1>Unable to handle kernel pointer dereference at virtual kernel address (null)
<4>Oops: 0004 [#1] PREEMPT SMP DEBUG_PAGEALLOC
<4>Modules linked in: af_iucv sunrpc qeth_l3 dm_multipath dm_mod vmur qeth ccwgroup
<4>CPU: 0 Not tainted 2.6.30 #4
<4>Process client-iucv (pid: 4787, task: 0000000034e75940, ksp: 00000000353e3710)
<4>Krnl PSW : 0704000180000000 000000000043ebca (sock_queue_rcv_skb+0x7a/0x138)
<4>           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 EA:3
<4>Krnl GPRS: 0052900000000000 000003e0016e0fe8 0000000000000000 0000000000000000
<4>           000000000043eba8 0000000000000002 0000000000000001 00000000341aa7f0
<4>           0000000000000000 0000000000007800 0000000000000000 0000000000000000
<4>           00000000341aa7f0 0000000000594650 000000000043eba8 000000003fc2fb28
<4>Krnl Code: 000000000043ebbe: a7840006            brc     8,43ebca
<4>           000000000043ebc2: 5930c23c            c       %r3,572(%r12)
<4>           000000000043ebc6: a724004c            brc     2,43ec5e
<4>          >000000000043ebca: e3c0b0100024        stg     %r12,16(%r11)
<4>           000000000043ebd0: a7190000            lghi    %r1,0
<4>           000000000043ebd4: e310b0200024        stg     %r1,32(%r11)
<4>           000000000043ebda: c010ffffdce9        larl    %r1,43a5ac
<4>           000000000043ebe0: e310b0800024        stg     %r1,128(%r11)
<4>Call Trace:
<4>([<000000000043eba8>] sock_queue_rcv_skb+0x58/0x138)
<4> [<000003e0016bcf2a>] iucv_process_message+0x112/0x3cc [af_iucv]
<4> [<000003e0016bd3d4>] iucv_callback_rx+0x1f0/0x274 [af_iucv]
<4> [<000000000053a21a>] iucv_message_pending+0xa2/0x120
<4> [<000000000053b5a6>] iucv_tasklet_fn+0x176/0x1b8
<4> [<000000000014fa82>] tasklet_action+0xfe/0x1f4
<4> [<0000000000150a56>] __do_softirq+0x116/0x284
<4> [<0000000000111058>] do_softirq+0xe4/0xe8
<4> [<00000000001504ba>] irq_exit+0xba/0xd8
<4> [<000000000010e0b2>] do_extint+0x146/0x190
<4> [<00000000001184b6>] ext_no_vtime+0x1e/0x22
<4> [<00000000001fbf4e>] kfree+0x202/0x28c
<4>([<00000000001fbf44>] kfree+0x1f8/0x28c)
<4> [<000000000044205a>] __kfree_skb+0x32/0x124
<4> [<000003e0016bd8b2>] iucv_sock_recvmsg+0x236/0x41c [af_iucv]
<4> [<0000000000437042>] sock_aio_read+0x136/0x160
<4> [<0000000000205e50>] do_sync_read+0xe4/0x13c
<4> [<0000000000206dce>] vfs_read+0x152/0x15c
<4> [<0000000000206ed0>] SyS_read+0x54/0xac
<4> [<0000000000117c8e>] sysc_noemu+0x10/0x16
<4> [<00000042ff8def3c>] 0x42ff8def3c

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 20:57:39 -07:00
Hendrik Brueckner
7514bab04e af_iucv: do not call iucv_sock_kill() twice
For non-accepted sockets on the accept queue, iucv_sock_kill()
is called twice (in iucv_sock_close() and iucv_sock_cleanup_listen()).
This typically results in a kernel oops as shown below.

Remove the duplicate call to iucv_sock_kill() and set the SOCK_ZAPPED
flag in iucv_sock_close() only.

The iucv_sock_kill() function frees a socket only if the socket is zapped
and orphaned (sk->sk_socket == NULL):
  - Non-accepted sockets are always orphaned and, thus, iucv_sock_kill()
    frees the socket twice.
  - For accepted sockets or sockets created with iucv_sock_create(),
    sk->sk_socket is initialized. This caused the first call to
    iucv_sock_kill() to return immediately. To free these sockets,
    iucv_sock_release() uses sock_orphan() before calling iucv_sock_kill().

<1>Unable to handle kernel pointer dereference at virtual kernel address 000000003edd3000
<4>Oops: 0011 [#1] PREEMPT SMP DEBUG_PAGEALLOC
<4>Modules linked in: af_iucv sunrpc qeth_l3 dm_multipath dm_mod qeth vmur ccwgroup
<4>CPU: 0 Not tainted 2.6.30 #4
<4>Process iucv_sock_close (pid: 2486, task: 000000003aea4340, ksp: 000000003b75bc68)
<4>Krnl PSW : 0704200180000000 000003e00168e23a (iucv_sock_kill+0x2e/0xcc [af_iucv])
<4>           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
<4>Krnl GPRS: 0000000000000000 000000003b75c000 000000003edd37f0 0000000000000001
<4>           000003e00168ec62 000000003988d960 0000000000000000 000003e0016b0608
<4>           000000003fe81b20 000000003839bb58 00000000399977f0 000000003edd37f0
<4>           000003e00168b000 000003e00168f138 000000003b75bcd0 000000003b75bc98
<4>Krnl Code: 000003e00168e22a: c0c0ffffe6eb	larl	%r12,3e00168b000
<4>           000003e00168e230: b90400b2		lgr	%r11,%r2
<4>           000003e00168e234: e3e0f0980024	stg	%r14,152(%r15)
<4>          >000003e00168e23a: e310225e0090	llgc	%r1,606(%r2)
<4>           000003e00168e240: a7110001		tmll	%r1,1
<4>           000003e00168e244: a7840007		brc	8,3e00168e252
<4>           000003e00168e248: d507d00023c8	clc	0(8,%r13),968(%r2)
<4>           000003e00168e24e: a7840009		brc	8,3e00168e260
<4>Call Trace:
<4>([<000003e0016b0608>] afiucv_dbf+0x0/0xfffffffffffdea20 [af_iucv])
<4> [<000003e00168ec6c>] iucv_sock_close+0x130/0x368 [af_iucv]
<4> [<000003e00168ef02>] iucv_sock_release+0x5e/0xe4 [af_iucv]
<4> [<0000000000438e6c>] sock_release+0x44/0x104
<4> [<0000000000438f5e>] sock_close+0x32/0x50
<4> [<0000000000207898>] __fput+0xf4/0x250
<4> [<00000000002038aa>] filp_close+0x7a/0xa8
<4> [<00000000002039ba>] SyS_close+0xe2/0x148
<4> [<0000000000117c8e>] sysc_noemu+0x10/0x16
<4> [<00000042ff8deeac>] 0x42ff8deeac

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 20:57:38 -07:00
Hendrik Brueckner
56a73de388 af_iucv: handle non-accepted sockets after resuming from suspend
After resuming from suspend, all af_iucv sockets are disconnected.
Ensure that iucv_accept_dequeue() can handle disconnected sockets
which are not yet accepted.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 20:57:36 -07:00
Hendrik Brueckner
d9973179ae af_iucv: fix race in __iucv_sock_wait()
Moving prepare_to_wait before the condition to avoid a race between
schedule_timeout and wake up.
The race can appear during iucv_sock_connect() and iucv_callback_connack().

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 20:57:35 -07:00
Hendrik Brueckner
b29e4da41e iucv: use correct output register in iucv_query_maxconn()
The iucv_query_maxconn() function uses the wrong output register and
stores the size of the interrupt buffer instead of the maximum number
of connections.

According to the QUERY IUCV function, general register 1 contains the
maximum number of connections.

If the maximum number of connections is not set properly, the following
warning is displayed:

Badness at /usr/src/kernel-source/2.6.30-39.x.20090806/net/iucv/iucv.c:1808
Modules linked in: netiucv fsm af_iucv sunrpc qeth_l3 dm_multipath dm_mod vmur qeth ccwgroup
CPU: 0 Tainted: G        W  2.6.30 #4
Process seq (pid: 16925, task: 0000000030e24a40, ksp: 000000003033bd98)
Krnl PSW : 0404200180000000 000000000053b270 (iucv_external_interrupt+0x64/0x224)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
Krnl GPRS: 00000000011279c2 00000000014bdb70 0029000000000000 0000000000000029
           000000000053b236 000000000001dba4 0000000000000000 0000000000859210
           0000000000a67f68 00000000008a6100 000000003f83fb90 0000000000004000
           000000003f8c7bc8 00000000005a2250 000000000053b236 000000003fc2fe08
Krnl Code: 000000000053b262: e33010000021	clg	%r3,0(%r1)
           000000000053b268: a7440010		brc	4,53b288
           000000000053b26c: a7f40001		brc	15,53b26e
          >000000000053b270: c03000184134	larl	%r3,8434d8
           000000000053b276: eb220030000c	srlg	%r2,%r2,48
           000000000053b27c: eb6ff0a00004	lmg	%r6,%r15,160(%r15)
           000000000053b282: c0f4fffff6a7	brcl	15,539fd0
           000000000053b288: 4310a003		ic	%r1,3(%r10)
Call Trace:
([<000000000053b236>] iucv_external_interrupt+0x2a/0x224)
 [<000000000010e09e>] do_extint+0x132/0x190
 [<00000000001184b6>] ext_no_vtime+0x1e/0x22
 [<0000000000549f7a>] _spin_unlock_irqrestore+0x96/0xa4
([<0000000000549f70>] _spin_unlock_irqrestore+0x8c/0xa4)
 [<00000000002101d6>] pipe_write+0x3da/0x5bc
 [<0000000000205d14>] do_sync_write+0xe4/0x13c
 [<0000000000206a7e>] vfs_write+0xae/0x15c
 [<0000000000206c24>] SyS_write+0x54/0xac
 [<0000000000117c8e>] sysc_noemu+0x10/0x16
 [<00000042ff8defcc>] 0x42ff8defcc

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 20:57:33 -07:00
Hendrik Brueckner
d28ecab0c4 iucv: fix iucv_buffer_cpumask check when calling IUCV functions
Prior to calling IUCV functions, the DECLARE BUFFER function must have been
called for at least one CPU to receive IUCV interrupts.

With commit "iucv: establish reboot notifier" (6c005961), a check has been
introduced to avoid calling IUCV functions if the current CPU does not have
an interrupt buffer declared.
Because one interrupt buffer is sufficient, change the condition to ensure
that one interrupt buffer is available.

In addition, checking the buffer on the current CPU creates a race with
CPU up/down notifications: before checking the buffer, the IUCV function
might be interrupted by an smp_call_function() that retrieves the interrupt
buffer for the current CPU.
When the IUCV function continues, the check fails and -EIO is returned. If a
buffer is available on any other CPU, the IUCV function call must be invoked
(instead of failing with -EIO).

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 20:57:31 -07:00
Ursula Braun
4c89d86b4d iucv: suspend/resume error msg for left over pathes
During suspend IUCV exploiters have to close their IUCV connections.
When restoring an image, it can be checked if all IUCV pathes had
been closed before the Linux instance was suspended. If not, an
error message is issued to indicate a problem in one of the
used programs exploiting IUCV communication.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 20:57:29 -07:00
David S. Miller
12cbcfd386 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan 2009-09-16 20:55:28 -07:00
Jean-Christophe PLAGNIOL-VILLARD
0aad191c5f wl12xx: switch to %pM to print the mac address
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 20:51:24 -07:00
Dongdong Deng
e99b1f04d9 b44: the poll handler b44_poll must not enable IRQ unconditionally
net/core/netpoll.c::netpoll_send_skb() calls the poll handler when
it is available. As netconsole can be used from almost any context,
IRQ must not be enabled blindly in the NAPI handler of the driver
which supports netpoll.

Call trace:
netpoll_send_skb()
{
local_irq_save(flags)
  -> netpoll_poll()
    -> poll_napi()
      -> poll_one_napi()
        -> napi->poll()
            -> b44_poll()
local_irq_restore(flags)
}

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16 20:49:47 -07:00
Yi Li
5bf9cbef99 Blackfin: update ftrace for latest toolchain
The mcount support that was finally added to the Blackfin gcc port isn't
exactly the same as what ftrace was developed against.  Now that the final
gcc version is in place, update the ftrace code to match.

While updating this, fix the swapped arguments to the tracer (signature is
(ip, parent_ip) while we were passing (parent_ip, ip)).

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:52 -04:00
Mike Frysinger
3b67d91b3e Blackfin: fix elf_fpregset_t definition
The elf_fpregset_t type relied on an empty struct in the asm/user.h, but
the transition to asm-generic/user.h dropped that empty struct.  Rather
than restore this useless struct, define the only user (elf_fpregset_t)
as an empty struct itself.  This fixes building when ELF dump support is
enabled.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:51 -04:00
Mike Frysinger
ea426e6c62 Blackfin: unify cache init functions
The CPLB implementations (mpu/nompu) had exact copies of the cacheinit
code.  Even the i/d cache functions are largely the same.  So unify them
both in the common kernel cache code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:49 -04:00
Graf Yang
e78feaaeeb Blackfin: swap clocksource ratings for gptimer/cycles
The cycles clocksource is a higher resolution than the gptimer one, so
make sure the ratings field reflects this.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:48 -04:00
Mike Frysinger
3289651a97 Blackfin: update ftrace_push_return_trace() breakage
Commit 71e308a239 updated ftrace_push_return_trace() prototype but didn't
update the Blackfin ftrace code, so things broke.  Since we don't support
the new stuff yet, call it with stub values.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:47 -04:00
Harald Krapfenbauer
9c21453e37 Blackfin: update cm board resources
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:46 -04:00
Harald Krapfenbauer
6058434468 Blackfin: cm-bf537u: split board from cm-bf537e
The cm-bf537u module, while similar to the cm-bf537e, is different enough
to warrant its own resources.  It has a USB controller but no PHY.

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:45 -04:00
Barry Song
769cfc0d08 Blackfin: bf538-ezkit: add SPI IRQ resources
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:43 -04:00
Sonic Zhang
88c28b2df9 Blackfin: increase default async timings for parallel flashes
The default async timings are a little too fast for the parallel flash
that is attached by default to the async banks.  So slow things down a bit
so accessing the hardware is stable.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:42 -04:00
Bernd Schmidt
4663f6ef25 Blackfin: add ICPLB coverage for async banks
When doing XIP, we need to execute out of the async banks, so we need
ICPLBs to allow this.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:42 -04:00
Mingquan Pan
4a3e53c1c4 Blackfin: use KERN_ALERT in all kgdb_test output
Most messages are already using KERN_ALERT, so be consistent to make
things easier to check with test scripts.

Signed-off-by: Mingquan Pan <grace.pan@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:40 -04:00
Yi Li
4e4d496ee3 Blackfin: fix BF54x SPI CS resources
The BF54x has three slave select signals for SPI0/SPI1, not eight.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:39 -04:00
Robin Getz
774b80229f Blackfin: fix typo in isram_write()
The DTEST write bit is 2, not 1.  Improve comments in the related macro
while we're here.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:38 -04:00
Michael Hennerich
ba877d4491 Blackfin: bf537-stamp: add adp5588 gpio resources
For the adp5588 GPIO daughter card.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:37 -04:00
Mike Frysinger
c40cdb2cbd Blackfin: add some isram-driver self tests
Make it easy to figure out if code changes here are correct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:36 -04:00
Robin Getz
dedfd5d7f2 Blackfin: workaround anomaly 05000283
Make sure our interrupt entry code with exact hardware errors handles
anomaly 05000283 (infinite stall in system MMR kill) so we don't stall
while under load.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:34 -04:00
Michael Hennerich
05d17dfaab Blackfin: fix spelling in a few comments
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:33 -04:00
Yi Li
b6dbde27dd Blackfin: use raw_smp_processor_id() in exception code
When preempt debugging is enabled, smp_processor_id() may utilize the
"current" structure.  This may not be safe to access under all exceptions
due to it being in dynamically allocated memory.  So in exception code,
make sure we use raw_smp_processor_id() instead to get at the real value
directly.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:32 -04:00
Michael Hennerich
00dd66d012 Blackfin: remove useless duplicated assignment in gpio code
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:31 -04:00
Ingo Molnar
8d7ac69ffa Blackfin: Fix link errors with binutils 2.19 and GCC 4.3
Not sure whether this has been reported/fixed before.

Today I built a Blackfin tool-chain from scratch for -tip testing,
and it triggers:

 arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.data_a_l1' referenced in expression

and:

 arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.text_data_l1'
referenced in expression

Now i dont have any way to test this linker script, but it now at
least builds fine after fixing what appears to be typos in those
assert statements.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:30 -04:00
Graf Yang
1794131471 Blackfin: handle the core timer interrupt with handle_percpu_irq on SMP
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:29 -04:00
Mike Frysinger
926494943b Blackfin: optimize fixed code handling for the most common case
The majority of the time we are returning to user space, it is not in the
fixed atomic code region.  So rather than branch to a function where we
check the PC and return, do the check inline and branch only when needed.

Also, tweak some of the fixed code handling based on assumptions we are
aware of but cannot be expressed in C.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:28 -04:00
Barry Song
dac981740f Blackfin: delete '-spi' suffix in ad1836/ad1938 driver name
The ASoC drivers have dropped the redundant "-spi" suffix in the driver
name, so update the board resources accordingly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:27 -04:00
Mike Frysinger
3aa670419a Blackfin: punt dead cache locking code
No one uses these functions, and some are duplicate of existing C code.  So
just punt the whole thing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:25 -04:00
Mike Frysinger
0198b3bcae Blackfin: drop board resources for dead devices (pbx/ad9960)
These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:24 -04:00
Yi Li
c4baebf268 Blackfin: do not trace the exception handler
Since the exception handler cannot cause exceptions, we cannot trace it
without easily causing double faults and crashing the system.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:23 -04:00
Mike Frysinger
7b06263bd7 Blackfin: fix BF522/BF523 max VCO mixup
The BF522 and BF523 had their real max VCO values swapped.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:22 -04:00