Switch shdma to using devm_* managed functions for allocation of memory,
requesting IRQs, mapping IO resources etc.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
On newer r-car SoCs the CHCLR register only contains one bit per channel,
to which a 1 has to be written to reset the channel. Older SoC versions had
one CHCLR register per channel, to which a 0 must be written to reset the
channel and clear its buffers. This patch adds support for the newer
layout.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This adds the ROM script addresses for i.MX25, i.MX5x and i.MX6 to the
SDMA driver needed for the driver to work without additional firmware.
The ROM script addresses are SoC specific and in some cases even tapeout
specific. This patch adds the ROM script addresses only for SoCs which
do not have a tapeout specific SDMA ROM, because currently it's unclear
how this case should be handled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Use a struct type instead of an enum type for distinguishing between
different versions. This makes it simpler to handle multiple differences
without cluttering the code with comparisons for certain devtypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
As the driver now has its own xlate function and makes use of the
dma_get_slave_channel(), we need to manually set the DMA_PRIVATE flags.
Drivers which rely on of_dma_simple_xlate() do implicitly the same by
going through __dma_request_channel().
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Provide a callback to prepare cyclic DMA transfers.
This is for instance needed for audio channel transport.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In order to fully support multiple transactions per channel, we need to
assure we get an interrupt for each completed transaction. That flags
bit is also our only way to tell at which descriptor a transaction ends.
So, remove the manual clearing of that bit, and then inline the only
remaining command that is left in append_pending_queue() for better
readability.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Currently, when an interrupt has occured for a channel, the tasklet
worker code will only look at the very last entry in the running list
and complete its cookie, and then dispose the entire running chain.
Hence, the first transaction's cookie will never complete.
In fact, the interrupt we should handle will be the one related to the
first descriptor in the chain with the ENDIRQEN bit set, so complete
the second transaction that is in fact still running.
As a result, the driver can't currently handle multiple transactions on
one chanel, and it's likely that no drivers exist that rely on this
feature.
Fix this by walking the running_chain and look for the first
descriptor that has the interrupt-enable bit set. Only queue
descriptors up to that point for completion handling, while leaving
the rest intact. Also, only make the channel idle if the list is
completely empty after such a cycle.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In case of big endian CPU we have to convert either all fields in the structure
or leave this job to ACPICA. The second choice seems the best.
So, let's remove the ugly conversion that is not fully comprehensive anyway.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
If "num_disabled" is equal to STEDMA40_MAX_PHYS (32) then we would write
one space beyond the end of the pdata->disable_channels[] array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
When CONFIG_ARM_LPAE=y the following build warning are generated:
drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat]
drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat]
drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat]
drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat]
According to Documentation/printk-formats.txt '%pa' can be used to properly
print 'resource_size_t'.
Also, for printing memory region the '%pr' is more convenient.
Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Fix:
arch/arm/common/built-in.o: undefined reference to `edma_filter_fn'
seen with "make ARCH=arm allmodconfig"
Commit 6cba4355 (ARM: edma: Add DT and runtime PM support to the private EDMA
API) adds a dependency on edma_filter_fn() into arch/arm/common/edma.c. Since
this file is always built into the kernel, edma_filter_fn() must be built into
the kernel as well.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In the shdma driver __iomem pointers are used to point to hardware
registers. Using typed pointers like "u32 __iomem *" in this case is
inconvenient, because then offsets, added to such pointers, have to be
devided by sizeof(u32) or similar. Switch the driver to use void
pointers, which avoids this clumsiness.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
struct sh_dmae_device::chan_reg is a pointer to u32, therefore when adding
offsets to it care should be taken to add offsets in sizeof(u32) units, not
in bytes. This patch corrects such a bug. While at it we also remove the
redundant parameter of the affected function.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Building dma_v3.o triggers a GCC warning:
drivers/dma/ioat/dma_v3.c: In function ‘__ioat3_prep_pq16_lock’:
drivers/dma/ioat/dma_v3.c:264:11: warning: array subscript is below array bounds [-Warray-bounds]
drivers/dma/ioat/dma_v3.c:264:11: warning: array subscript is below array bounds [-Warray-bounds]
This warning is caused by pq16_set_src(). It uses "int idx" as an index
to an eight element array. Changing "idx" to "unsigned" silences this
warning. Apparently GCC can then determine that "idx" will never be
negative.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <djbw@fb.com>
dma_channel_rebalance() currently distributes channels by processor ID.
These IDs often change with the BIOS, and the order isn't related to
the DMA channel list (related to PCI bus ids).
* On my SuperMicro dual E5 machine, first socket has processor IDs [0-7]
(and [16-23] for hyperthreads), second socket has [8-15]+[24-31]
=> channels are properly allocated to local CPUs.
* On Dells R720 with same processors, first socket has even processor IDs,
second socket has odd numbers
=> half the processors get channels on the remote socket, causing
cross-NUMA traffic and lower DMA performance.
Change nth_chan() to return the channel with min table_count and in the
NUMA node of the given CPU, if any. If none, the (non-local) channel with
min table_count is returned. nth_chan() is therefore renamed into min_chan()
since we don't iterate until the nth channel anymore. In practice, the
behavior is the same because first channels are taken first and are then
ignored because they got an additional reference.
The new code has a slightly higher complexity since we always scan the
entire list of channels for finding the minimal table_count (instead
of stopping after N chans), and because we check whether the CPU is in the
DMA device locality mask. Overall we still have time complexity =
number of chans x number of processors. This rebalance is rarely used,
so this won't hurt.
On the above SuperMicro machine, channels are still allocated the same.
On the Dells, there are no locality issue anymore (MEMCPY channel X goes
to processor X and to its hyperthread sibling).
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Dan Williams <djbw@fb.com>
Disable RAID on non-Atom platform and remove related fixups such as the
64-byte alignement restriction on legacy DMA operations (introduced in
commit f26df1a1 as a workaround for silicon errata).
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Dan Williams <djbw@fb.com>
The mv_xor driver had never been used in a big-endian context, and
therefore was not using the hardware features to support such an
execution environment. The hardware provides a "descriptor swap" bit
that automatically swaps the bytes of the DMA descriptors, within
blocks of 8 bytes. This requires a different DMA descriptor layout on
big-endian systems, as well as enabling this "descriptor swap" bit.
This mechanism is exactly identical to the one already used in the
mv643xx_eth network driver and the mvneta network driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dan Williams <djbw@fb.com>
In order to support big-endian execution, the mv_xor driver is changed
to use the readl_relaxed() and writel_relaxed() accessors that
properly convert from the CPU endianess to the device endianess (which
in the case of Marvell XOR hardware is always little-endian).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dan Williams <djbw@fb.com>
Let's move the behaviour of printing no error message back to the pre v3.10
times. It means we will use debug level in the described case, and a warning
level otherwise.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <djbw@fb.com>
There is a really little chance when we are able to create a directory and are
not able to create nodes under it. So, this patch just removes those checks.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dan Williams <djbw@fb.com>
The debugfs interface brought a copy of the test case parameters. This makes
different set of values under /sys/module/dmatest/parameters/ and
/sys/kernel/debug/dmatest/. The user might be confused by the divergence of
values.
The proposed solution in this patch is to make module parameters writable and
remove them from the debugfs. Though we're still using debugfs to control test
runner and getting results.
Documentation part is updated accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Dan Williams <djbw@fb.com>
Signed-off-by: Dan Williams <djbw@fb.com>
In Rob's recent pull request the patch
ARM: highbank: select ARCH_DMA_ADDR_T_64BIT for LPAE
promotes dma_addr_t to 64bit, so printk generates a warning about
an incorrect type. Fix this by casting it to u64 and using %llx.
Fixing long lines on the way.
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
When dma_addr_t is 64 bits long, compilation of the AMBA PL08x DMA
driver breaks due to a missing 64bit%8bit modulo operation.
Looking more closely the divisor in these operations can only be
1, 2 or 4, so the full featured '%' modulo operation is overkill and
can be replaced with simple bit masking.
Change from v1:
Replace open-coded function with existing IS_ALIGNED macro and use a
macro around that to avoid a line becoming too long.
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
With all mxs-dma clients moved to use generic DMA helper, the code
left from generic DMA binding conversion can be removed now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
After the patch: "2ccaef0 dma: imx-sdma: make channel0 operations atomic",
the "done" completion is not used any more.
Just remove it.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Remove unneeded error handling on the result of a call to
platform_get_resource when the value is passed to devm_ioremap_resource.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression pdev,res,n,e,e1;
expression ret != 0;
identifier l;
@@
- res = platform_get_resource(pdev, IORESOURCE_MEM, n);
... when != res
- if (res == NULL) { ... \(goto l;\|return ret;\) }
... when != res
+ res = platform_get_resource(pdev, IORESOURCE_MEM, n);
e = devm_ioremap_resource(e1, res);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The PXA DMA controller has a DALGN register which allows for
byte-aligned DMA transfers. Use it in case any of the transfer
descriptors is not aligned to a mask of ~0x7.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The DMA_SLAVE is currently set twice.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This patch makes the mmp_pdma controller able to provide DMA resources
in DT environments by providing an dma xlate function.
of_dma_simple_xlate() isn't used here, because if fails to handle
multiple different DMA engines or several instances of the same
controller. Instead, a private implementation is provided that makes use
of the newly introduced dma_get_slave_channel() call.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
PXA peripherals need to obtain specific DMA request ids which will
eventually be stored in the DRCMR register.
Currently, clients are expected to store that number inside the slave
config block as slave_id, which is unfortunately incompatible with the
way DMA resources are handled in DT environments.
This patch adds a filter function which stores the filter parameter
passed in by of-dma.c into the channel's drcmr register.
For backward compatability, cfg->slave_id is still used if set to
a non-zero value.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
There's no reason for limiting the maximum transfer length to 0x1000.
Take the actual bit mask instead; the PDMA is able to transfer chunks of
up to SZ_8K - 1.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
As suggested by Ezequiel García, release the spinlock at the end of the
function only, and use a goto for the control flow.
Just a minor cleanup.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The exact same calculation is done twice, so let's factor it out to a
macro.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
All patches here have been pending on linux-usb
and sitting in linux-next for a while now.
The biggest things in this tag are:
DWC3 learned proper usage of threaded IRQ
handlers and now we spend very little time
in hardirq context.
MUSB now has proper support for BeagleBone and
Beaglebone Black.
Tegra's USB support also got quite a bit of love
and is learning to use PHY layer and generic DT
attributes.
Other than that, the usual pack of cleanups and
non-critical fixes follow.
Signed-of-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=3NS9
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: patches for v3.12 merge window
All patches here have been pending on linux-usb
and sitting in linux-next for a while now.
The biggest things in this tag are:
DWC3 learned proper usage of threaded IRQ
handlers and now we spend very little time
in hardirq context.
MUSB now has proper support for BeagleBone and
Beaglebone Black.
Tegra's USB support also got quite a bit of love
and is learning to use PHY layer and generic DT
attributes.
Other than that, the usual pack of cleanups and
non-critical fixes follow.
Signed-of-by: Felipe Balbi <balbi@ti.com>
Conflicts:
drivers/usb/gadget/udc-core.c
drivers/usb/host/ehci-tegra.c
drivers/usb/musb/omap2430.c
drivers/usb/musb/tusb6010.c
This patch adds __pl330_giveback_descs which give back descriptors when fails
allocating descriptors. It requires to eliminate duplication for
pl330_prep_dma_sg which will be added later.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Acked-by : Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
this patch adds PM ops entries in sirf-dma drivers, so that this
driver can support suspend/resume, hibernation and runtime PM.
while suspending, sirf-dma will lose all registers, so we save
them at suspend and restore in resume for active channels.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
sirfsoc_dma_prep_cyclic() returns pointer, thus NULL should be
used instead of 0 in order to fix the following sparse warning:
drivers/dma/sirf-dma.c:598:24: warning: Using plain integer as NULL pointer
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
%p is used, thus NULL should be used instead of 0
in order to fix the following sparse warning:
drivers/dma/mv_xor.c:648:9: warning: Using plain integer as NULL pointer
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
mmp_pdma_alloc_descriptor() is used only in this file.
Fix the following sparse warning:
drivers/dma/mmp_pdma.c:359:25: warning: symbol 'mmp_pdma_alloc_descriptor' was not declared. Should it be static?
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This driver is currently used by musb' cppi41 couter part. I may merge
both dma engine user of musb at some point but not just yet.
The driver seems to work in RX/TX mode in host mode, tested on mass
storage. I increaed the size of the TX / RX transfers and waited for the
core code to cancel a transfers and it seems to recover.
v2..3:
- use mall transfers on RX side and check data toggle.
- use rndis mode on tx side so we haveon interrupt for 4096 transfers.
- remove custom "transferred" hack and use dmaengine_tx_status() to
compute the total amount of data that has been transferred.
- cancel transfers and reclaim descriptors
v1..v2:
- RX path added
- dma mode 0 & 1 is working
- device tree nodes re-created.
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <djbw@fb.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
In mmp pdma, phy channels are allocated/freed dynamically.
The mapping from DMA request to DMA channel number in DRCMR
should be cleared when a phy channel is freed. Otherwise
conflicts will happen when:
1. A is using channel 2 and free it after finished, but A
still maps to channel 2 in DRCMR of A.
2. Now another one B gets channel 2. So B maps to channel 2
too in DRCMR of B.
In the datasheet, it is described that "Do not map two active
requests to the same channel since it produces unpredictable
results" and we can observe that during test.
Signed-off-by: Xiang Wang <wangx@marvell.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In mmp pdma, phy channels are allocated/freed dynamically
and frequently. But no proper protection is added.
Conflict will happen when multi-users are requesting phy
channels at the same time. Use spinlock to protect.
Signed-off-by: Xiang Wang <wangx@marvell.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
To obey a usual practice let's return DMA_PAUSED status only if
dma_cookie_status returned DMA_IN_PROGRESS.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
There is no point to go throught the rest of the function if first call to
dma_cookie_status() returned DMA_SUCCESS.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In the PC world is quite possible that devices are sharing the same interrupt
line. The patch prepares dw_dmac driver to such cases.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In general ~0 does not fit some integer types. Let's do a helper to make a
comparison with that constant properly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In rare cases (mostly for the testing purposes) the dw_dmac driver might be
compiled as a module as well as the other LPSS device drivers (I2C, SPI,
HSUART). When udev handles the event of the devices appearing the dw_dmac
module is missing. This patch will fix that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This patch fixes sparse warning:
drivers/dma/acpi-dma.c:76:21: sparse: cast to restricted __le32
Since everything in all ACPI tables is little-endian, by definition, the used
types in practice are uXX. Thus, we have to enforce __leXX if we want to
convert them to CPU order.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
There is no point to go throught the rest of the function if first call to
dma_cookie_status() returned DMA_SUCCESS.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dma_set_residue() sets only residue value, so user can't rely on the returned
values of cookies. That patch standardize the behaviour.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
It's better to use generic dma_cookie_status() that allows user to get standard
possible return codes independently of the DMAC driver in charge.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Accordingly to dma_cookie_status() description locking is not required.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Accordingly to dma_cookie_status() description locking is not required.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Accordingly to dma_cookie_status() description locking is not required.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Accordingly to dma_cookie_status() description locking is not required.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Accordingly to dma_cookie_status() description locking is not required.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Zhang Wei <zw@zh-kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Accordingly to dma_cookie_status() description locking is not required.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Residue value is assigned to 0 by dma_cookie_status().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
last_used variable is applied only once, so, let's substitute it by its value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
last_used variable is applied only once, so, let's substitute it by its value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
sh_desc->hw.tcr is controlling real data size,
and, register TCR is controlling data transfer count
which was xmit_shifted value of hw.tcr.
Current sh_dmae_get_partial() is calculating in different unit.
This patch fixes it.
This bug has been present since c014906a87
("dmaengine: shdma: extend .device_terminate_all() to record partial
transfer"), which was added in 2.6.34-rc1.
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Allocate a descriptor for each period of a cyclic transfer, not just the first.
Also since the callback needs to be called for each finished period make sure to
initialize the callback and callback_param fields of each descriptor in a cyclic
transfer.
Cc: stable@vger.kernel.org
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The dev_attrs field of struct class is going away soon, dev_groups
should be used instead. This converts the dma dma_devclass code to use
the correct field.
Cc: Dan Williams <djbw@fb.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return -ENODEV when no proper base address found error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Implement the device_slave_caps() callback for the pl330 driver. This allows
dmaengine users like the generic ALSA dmaengine PCM driver to query the
capabilities of the driver. The PL330 supports all buswidths and both
mem-to-dev as well as dev-to-mem transfers. In theory there is no limit on the
number of segments that can be transferred (in practice you'll run out of memory
eventually) and the number of bytes per segment is limited by the size of the
PL330 program buffer. Due to the nature of the PL330 the maximum number of bytes
per segment depends on the burstsize, the driver sets it to the value for a
1-byte burstsize, since it is the smallest.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The recent "drivers/dma: remove unused support for MEMSET operations"
change has fallout from lack of build testing by the author. This
fixes:
drivers/dma/iop-adma.c:1020:13: warning: unused variable 'dma_addr' [-Wunused-variable]
drivers/dma/iop-adma.c:1519:2: warning: format '%s' expects a matching 'char *' argument [-Wformat=]
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull slave-dmaengine updates from Vinod Koul:
"Once you have some time from extended weekend celebrations please
consider pulling the following to get:
- Various fixes and PCI driver for dw_dmac by Andy
- DT binding for imx-dma by Markus & imx-sdma by Shawn
- DT fixes for dmaengine by Lars
- jz4740 dmac driver by Lars
- and various fixes across the drivers"
What "extended weekend celebrations"? I'm in the merge window, who has
time for extended celebrations..
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits)
DMA: shdma: add DT support
DMA: shdma: shdma_chan_filter() has to be in shdma-base.h
DMA: shdma: (cosmetic) don't re-calculate a pointer
dmaengine: at_hdmac: prepare clk before calling enable
dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions
dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()
dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding
ARM: at91: dt: add header to define at_hdmac configuration
MIPS: jz4740: Correct clock gate bit for DMA controller
MIPS: jz4740: Remove custom DMA API
MIPS: jz4740: Register jz4740 DMA device
dma: Add a jz4740 dmaengine driver
MIPS: jz4740: Acquire and enable DMA controller clock
dma: mmp_tdma: disable irq when disabling dma channel
dmaengine: PL08x: Avoid collisions with get_signal() macro
dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically
dma: dw: add PCI part of the driver
dma: dw: split driver to library part and platform code
dma: move dw_dmac driver to an own directory
dw_dmac: don't check resource with devm_ioremap_resource
...
This patch adds Device Tree support to the shdma driver. No special DT
properties are used, only standard DMA DT bindings are implemented. Since
shdma controllers reside on SoCs, their configuration is SoC-specific and
shall be passed to the driver from the SoC platform data, using the
auxdata procedure.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Use an existing pointer instead of retrieving it again.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to
avoid common clk framework warnings.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
[nicolas.ferre@atmel.com: remove return code checking in at_dma_resume_noirq()]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Correct coding style following the patch:
7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91:
Get residual bytes in dma buffer).
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Since patch 7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91:
Get residual bytes in dma buffer), the function
atc_cleanup_descriptors() is not used anymore. We remove it to prevent
warnings.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
For most devices the FIFO configuration is the same i.e. when half FIFO size is
available/filled, a source/destination request is serviced. But USART devices
have to do it when there is enough space/data available to perform a single
AHB access so the ASAP configuration.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Now that all users of the custom jz4740 DMA API have been converted to use
the dmaengine API instead we can remove the custom API and move all the code
talking to the hardware to the dmaengine driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This patch adds dmaengine support for the JZ4740 DMA controller. For now the
driver will be a wrapper around the custom JZ4740 DMA API. Once all users of the
custom JZ4740 DMA API have been converted to the dmaengine API the custom API
will be removed and direct hardware access will be added to the dmaengine
driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
mask dma irq when disabling dma channel, so that interrupt status
will not be set and interrupt won't come again.
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Acked-by: Zhangfei Gao <zhangfei.gao@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
As pointed out by Arnd Bergmann there is a get_signal macro definied in
linux/signal.h which can conflict with the platform data callback
function of the same name leading to confusing errors from the compiler
(especially if signal.h manages to get pulled into the driver itself due
to header dependencies). Avoid such errors by renaming get_signal and
put_signal in the platform data to get_xfer_signal and put_xfer_signal.
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This is the PCI part of the DesignWare DMAC driver. The controller is usually
used in the Intel hardware such as Intel Medfield.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
To simplify the driver development let's split driver to library and platform
code parts. It helps us to add PCI driver in future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[Fixed compile error and few checkpatch issues]
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The dw_dmac driver is going to be split into multiple files. To make this more
convenient move it to an own directory.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The microcode bus address (pl330_dmac.mcode_bus) is currently a u32,
which fails to compile when building on a system with 64-bit bus
addresses.
This patch uses dma_addr_t to represent the address instead.
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The PL330 driver probes the peripheral and primecell IDs of the device to
make sure that it is indeed an AMBA PL330. However, it does this by
making byte accesses to a device mapping of the word-aligned ID
registers, which is either UNPREDICTABLE or generates an alignment fault
(depending on the presence of the virtualisation extensions).
Rather than fix this code, we can actually rip most of it out and let
the AMBA bus driver correctly do the probing for us.
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Update imx-sdma driver to adopt generic DMA device tree bindings. It
calls of_dma_controller_register() with imx-sdma specific of_dma_xlate
to get the generic DMA device tree helper support. The #dma-cells for
imx-sdma must be 3, which includes request ID, peripheral type and
priority.
The existing way of requesting channel, clients directly call
dma_request_channel(), still work there, and will be removed after
all imx-sdma clients get converted to generic DMA device tree helper.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
read SIRFSOC_DMA_CH_ADDR register to get current dma transfer position, then
update dma residue so that things like ALSA drivers work as ALSA drivers need
the right residue value.
Signed-off-by: Rongjun Ying <Rongjun.Ying@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Lock scenario: Channel 1 was allocated and prepared as slave_sg, used and freed.
Now preparation of cyclic dma on channel 1 will fail with err "DMA configuration
conflict" because tdc->isr_handler still setted to handle_once_dma_done.
This happens because tegra_dma_abort_all() won't be called on channel freeing
if pending list is empty and channel not busy. We need to clear isr_handler
on channel freeing to avoid locking.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
