The vendor_compatible and device_compatible fields in struct pci_dev aren't
used anywhere, and are somewhat pointless. Assuming that these are
historical artifacts, remove them.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
PCIE has a mechanism to wait for Non-Posted request to complete. I think
pci_disable_device is a good place to do this.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch #if 0's the following unused global functions:
- rom.c: pci_map_rom_copy()
- rom.c: pci_remove_rom()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch makes the needlessly global pci_restore_bars() static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (100 commits)
ide: move hwif_register() call out of ide_probe_port()
ide: factor out code for tuning devices from ide_probe_port()
ide: move handling of I/O resources out of ide_probe_port()
ide: make probe_hwif() return an error value
ide: use ide_remove_port_from_hwgroup in init_irq()
ide: prepare init_irq() for using ide_remove_port_from_hwgroup()
ide: factor out code removing port from hwgroup from ide_unregister()
ide: I/O resources are released too early in ide_unregister()
ide: cleanup ide_system_bus_speed()
ide: remove needless zeroing of hwgroup fields from init_irq()
ide: remove unused ide_hwgroup_t fields
ide_platform: remove struct hwif_prop
ide: remove hwif->present manipulations from hwif_init()
ide: move wait_hwif_ready() documentation in the right place
ide: fix handling of busy I/O resources in probe_hwif()
<linux/hdsmart.h> is not used by kernel code
ide: don't include <linux/hdsmart.h>
ide-floppy: cleanup header
ide: update/add my Copyrights
ide: delete filenames/versions from comments
...
This fixes a problem where the mos7720 driver will make io to a device from
which it has been logically disconnected. It does so by introducing a flag by
which the generic usb serial code can signal the subdrivers their
disconnection and appropriate locking.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch exports two statistics to userspace:
/sys/bus/usb/device/.../power/connected_duration
/sys/bus/usb/device/.../power/active_duration
connected_duration is the total time (in msec) that the device has
been connected. active_duration is the total time the device has not
been suspended. With these two statistics, tools like PowerTOP can
calculate the percentage time that a device is active, i.e. not
suspended or auto-suspended.
Users can also use the active_duration to check if a device is actually
autosuspended. Currently, they can set power/level to auto and
power/autosuspend to a positive timeout, but there's no way to know from
userspace if a device was actually autosuspended without looking at the
dmesg output. These statistics will be useful in creating an automated
userspace script to test autosuspend for USB devices.
Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Given that none of the referenced header files test the proprocessor
conditional __KERNEL__, there's no point "unifdef"fing them.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When a usb serial adapter is used as console, the usb serial console
driver bumps the open_count on the port struct used but doesn't attach
a real tty to it (only a fake one temporaly). If this port is opened later
using the regular character device interface, the open method won't
initialize the port, which is the expected, and will receive a brand new
tty struct created by tty layer, which will be stored in port->tty.
When the last close is issued, open_count won't be 0 because of the
console usage and the port->tty will still contain the old tty value. This
is the last ttyUSB<n> close so the allocated tty will be freed by the
tty layer. The usb_serial and usb_serial_port are still in use by the
console, so port_free() won't be called (serial_close() ->
usb_serial_put() -> destroy_serial() -> port_free()), so the scheduled
work (port->work, usb_serial_port_work()) will still run. And
usb_serial_port_work() does:
(...)
tty = port->tty;
if (!tty)
return;
tty_wakeup(tty);
which causes (manually copied):
Faulting instruction address: 0x6b6b6b68
Oops: Kernel access of bad area, sig: 11 [#1]
PREEMPT PowerMac
Modules linked in: binfmt_misc ipv6 nfs lockd nfs_acl sunrpc dm_snapshot dm_mirror dm_mod hfsplus uinput ams input_polldev genrtc cpufreq_powersave i2c_powermac therm_adt746x snd_aoa_codec_tas snd_aoa_fabric_layout snd_aoa joydev snd_aoa_i2sbus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc pmac_zilog serial_core evdev ide_cd cdrom snd appletouch soundcore snd_aoa_soundbus bcm43xx firmware_class usbhid ieee80211softmac ff_memless firewire_ohci firewire_core ieee80211 ieee80211_crypt crc_itu_t sungem sungem_phy uninorth_agp agpart ssb
NIP: 6b6b6b68 LR: c01b2108 CTR: 6b6b6b6b
REGS: c106de80 TRAP: 0400 Not tainted (2.6.24-rc2)
MSR: 40009032 <EE,ME,IR,DR> CR: 82004024 XER: 00000000
TASK = c106b4c0[5] 'events/0' THREAD: c106c000
GPR00: 6b6b6b6b c106df30 c106b4c0 c2d613a0 00009032 00000001 00001a00 00000001
GPR08: 00000008 00000000 00000000 c106c000 42004028 00000000 016ffbe0 0171a724
GPR16: 016ffcf4 00240e24 00240e70 016fee68 016ff9a4 c03046c4 c0327f50 c03046fc
GPR24: c106b6b9 c106b4c0 c101d610 c106c000 c02160fc c1eac1dc c2d613ac c2d613a0
NIP [6b6b6b68] 0x6b6b6b68
LR [c01b2108] tty_wakeup+0x6c/0x9c
Call Trace:
[c106df30] [c01b20e8] tty_wakeup+0x4c/0x9c (unreliable)
[c106df40] [c0216138] usb_serial_port_work+0x3c/0x78
[c106df50] [c00432e8] run_workqueue+0xc4/0x15c
[c106df90] [c0043798] worker_thread+0xa0/0x124
[c106dfd0] [c0048224] kthread+0x48/0x84
[c106dff0] [c00129bc] kernel_thread+0x44/0x60
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
Slab corruption: size-2048 start=c2d613a0, len=2048
Redzone: 0x9f911029d74e35b/0x9f911029d74e35b.
Last user: [<c01b16d8>](release_one_tty+0xbc/0xf4)
050: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Prev obj: start=c2d60b88, len=2048
Redzone: 0x9f911029d74e35b/0x9f911029d74e35b.
Last user: [<c00f30ec>](show_stat+0x410/0x428)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
This patch avoids this, clearing port->tty considering if the port is
used as serial console or not
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
G_PRINTER: Adds a USB printer gadget driver for use in printer firmware.
This adds a USB printer gadget driver for use in printer firmware.
The printer gadget channels data between the USB host and a userspace
program driving the print engine. The user space program reads and
writes the device file /dev/g_printer to receive or send printer data.
It can use ioctl calls to the device file to get or set printer status.
Signed-off-by: Craig W. Nadler <craig@nadler.us>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch (as1011) adds a #define for the newly-created Lockable
(i.e., password-protected) subclass 0x07 for USB mass-storage devices.
The private ISD200 entry (which had been mapped to subclass 0x07) is
moved to 0xf0, which is unlikely to conflict with any official
subclass designation.
The US_SC_MIN and US_SC_MAX constants aren't used anywhere, so the
patch removes them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert from class_device to device for drivers/usb/core.
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Make ide_build_sglist() and ide_destroy_dmatable() available also when
CONFIG_BLK_DEV_IDEDMA_PCI=n.
* Use ide_build_sglist() and ide_destroy_dmatable() in {ics,au1xxx-}ide.c
and remove no longer needed {ics,au}ide_build_sglist().
There should be no functionality changes caused by this patch.
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Keep pointer to struct device instead of struct pci_dev in ide_hwif_t.
While on it:
* Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce().
There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Add IDE_HFLAG_NO_DSC host flag for hosts that doesn't support DSC overlap.
* Set it in aec62xx (for ATP850UF only) and hpt34x host drivers.
* Convert ide-tape device driver to check for IDE_HFLAG_NO_DSC flag.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Rename 'simplex_stat' variable to 'dma_stat' in ide_get_or_set_dma_base().
* Factor out code for forcing host out of "simplex" mode from
ide_get_or_set_dma_base() to ide_pci_clear_simplex() helper.
* Add IDE_HFLAG_CLEAR_SIMPLEX host flag and set it in alim15x3 (for M5229),
amd74xx (for AMD 7409), cmd64x (for CMD643), generic (for Netcell) and
serverworks (for CSB5) host drivers.
* Make ide_get_or_set_dma_base() test for IDE_HFLAG_CLEAR_SIMPLEX host flag
instead of checking dev->device (BTW the code was buggy because it didn't
check for dev->vendor, luckily none of these PCI Device IDs was used by
some other vendor for PCI IDE controller).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
According to http://marc.info/?l=linux-ide&m=114346138611631, the drivers must
always register 8 DMA ports with ide_setup_dma(), so its last argument is not
needed. While at it, kill some useless parens in that function...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Add ide_dump_identify() debug helper for dumping raw identify data in
the hdparm friendly format (== the identify data can be extracted from
dmesg output and passed to hdparm --Istdin).
* Dump identify data in ide-probe.c::do_identify() if DEBUG is enabled.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Move lba_to_msf() and msf_to_lba() to <linux/cdrom.h>
(use 'u8' type instead of 'byte' while at it).
* Remove msf_to_lba() copy from drivers/cdrom/cdrom.c.
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
After commit 7267c33774
wait_drive_not_busy() can become static again.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
- ide_scan_pcibus() can become static
- instead of ide_scan_pci() we can use ide_scan_pcibus() directly
in module_init()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Move the initialzation in __svc_create_thread that happens prior to
thread creation to a new function. Export the function to allow
services to have better control over the svc_rqst structs.
Also rearrange the rqstp initialization to prevent NULL pointer
dereferences in svc_exit_thread in case allocations fail.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This file defines the data types used by the SVCRDMA transport module.
The principle data structure is the transport specific extension to
the svcxprt structure.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Create a transport independent version of the svc_sock_names function.
The toclose capability of the svc_sock_names service can be implemented
using the svc_xprt_find and svc_xprt_close services.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Add a new svc function that allows a service to query whether a
transport instance has already been created. This is used in lockd
to determine whether or not a transport needs to be created when
a lockd instance is brought up.
Specifying 0 for the address family or port is effectively a wild-card,
and will result in matching the first transport in the service's list
that has a matching class name.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Add a file that when read lists the set of registered svc
transports.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Some transports have a header in front of the RPC header. The current
defer/revisit processing considers only the iov_len and arg_len to
determine how much to back up when saving the original request
to revisit. Add a field to the rqstp structure to save the size
of the transport header so svc_defer can correctly compute
the start of a request.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This functionally trivial patch moves all of the transport independent
functions from the svcsock.c file to the transport independent svc_xprt.c
file.
In addition the following formatting changes were made:
- White space cleanup
- Function signatures on single line
- The inline directive was removed
- Lines over 80 columns were reformatted
- The term 'socket' was changed to 'transport' in comments
- The SMP comment was moved and updated.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This functionally empty patch removes rq_sock and unamed union
from rqstp structure.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch moves the transport sockaddr to the svc_xprt
structure. Convenience functions are added to set and
get the local and remote addresses of a transport from
the transport provider as well as determine the length
of a sockaddr.
A transport is responsible for setting the xpt_local
and xpt_remote addresses in the svc_xprt structure as
part of transport creation and xpo_accept processing. This
cannot be done in a generic way and in fact varies
between TCP, UDP and RDMA. A set of xpo_ functions
(e.g. getlocalname, getremotename) could have been
added but this would have resulted in additional
caching and copying of the addresses around. Note that
the xpt_local address should also be set on listening
endpoints; for TCP/RDMA this is done as part of
endpoint creation.
For connected transports like TCP and RDMA, the addresses
never change and can be set once and copied into the
rqstp structure for each request. For UDP, however, the
local and remote addresses may change for each request. In
this case, the address information is obtained from the
UDP recvmsg info and copied into the rqstp structure from
there.
A svc_xprt_local_port function was also added that returns
the local port given a transport. This is used by
svc_create_xprt when returning the port associated with
a newly created transport, and later when creating a
generic find transport service to check if a service is
already listening on a given port.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch moves the transport independent sk_deferred list to the svc_xprt
structure and updates the svc_deferred_req structure to keep pointers to
svc_xprt's directly. The deferral processing code is also moved out of the
transport dependent recvfrom functions and into the generic svc_recv path.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Move the authinfo cache to svc_xprt. This allows both the TCP and RDMA
transports to share this logic. A flag bit is used to determine if
auth information is to be cached or not. Previously, this code looked
at the transport protocol.
I've also changed the spin_lock/unlock logic so that a lock is not taken for
transports that are not caching auth info.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
With the implementation of the new mark and sweep algorithm for shutting
down old connections, the sk_lastrecv field is no longer needed.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
All fields touched by svc_sock_received are now transport independent.
Change it to use svc_xprt directly. This function is called from
transport dependent code, so export it.
Update the comment to clearly state the rules for calling this function.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Move the sk_mutex field to the transport independent svc_xprt structure.
Now all the fields that svc_send touches are transport neutral. Change the
svc_send function to use the transport independent svc_xprt directly instead
of the transport dependent svc_sock structure.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This functionally trivial patch moves the sk_reserved field to the
transport independent svc_xprt structure.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Move sk_list and sk_ready to svc_xprt. This involves close because these
lists are walked by svcs when closing all their transports. So I combined
the moving of these lists to svc_xprt with making close transport independent.
The svc_force_sock_close has been changed to svc_close_all and takes a list
as an argument. This removes some svc internals knowledge from the svcs.
This code races with module removal and transport addition.
Thanks to Simon Holm Thøgersen for a compile fix.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Simon Holm Thøgersen <odie@cs.aau.dk>
This is another incremental change that moves transport independent
fields from svc_sock to the svc_xprt structure. The changes
should be functionally null.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This functionally trivial change moves the transport independent sk_flags
field to the transport independent svc_xprt structure.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Change the atomic_t reference count to a kref and move it to the
transport indepenent svc_xprt structure. Change the reference count
wrapper names to be generic.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Modify the various kernel RPC svcs to use the svc_create_xprt service.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The svc_create_xprt function is a transport independent version
of the svc_makesock function.
Since transport instance creation contains transport dependent and
independent components, add an xpo_create transport function. The
transport implementation of this function allocates the memory for the
endpoint, implements the transport dependent initialization logic, and
calls svc_xprt_init to initialize the transport independent field (svc_xprt)
in it's data structure.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Previously, the accept logic looked into the socket state to determine
whether to call accept or recv when data-ready was indicated on an endpoint.
Since some transports don't use sockets, this logic now uses a flag
bit (SK_LISTENER) to identify listening endpoints. A transport function
(xpo_accept) allows each transport to define its own accept processing.
A transport's initialization logic is reponsible for setting the
SK_LISTENER bit. I didn't see any way to do this in transport independent
logic since the passive side of a UDP connection doesn't listen and
always recv's.
In the svc_recv function, if the SK_LISTENER bit is set, the transport
xpo_accept function is called to handle accept processing.
Note that all functions are defined even if they don't make sense
for a given transport. For example, accept doesn't mean anything for
UDP. The function is defined anyway and bug checks if called. The
UDP transport should never set the SK_LISTENER bit.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In order to avoid blocking a service thread, the receive side checks
to see if there is sufficient write space to reply to the request.
Each transport has a different mechanism for determining if there is
enough write space to reply.
The code that checked for write space was coupled with code that
checked for CLOSE and CONN. These checks have been broken out into
separate statements to make the code easier to read.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Some transports add fields to the RPC header for replies, e.g. the TCP
record length. This function is called when preparing the reply header
to allow each transport to add whatever fields it requires.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Add transport specific xpo_detach and xpo_free functions. The xpo_detach
function causes the transport to stop delivering data-ready events
and enqueing the transport for I/O.
The xpo_free function frees all resources associated with the particular
transport instance.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The svc_sock_release function releases pages allocated to a thread. For
UDP this frees the receive skb. For RDMA it will post a receive WR
and bump the client credit count.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The sk_sendto and sk_recvfrom are function pointers that allow svc_sock
to be used for both UDP and TCP. Move these function pointers to the
svc_xprt_ops structure.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The svc_max_payload function currently looks at the socket type
to determine the max payload. Add a max payload value to svc_xprt_class
so it can be returned directly.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The rqstp structure contains a pointer to the transport for the
RPC request. This functionaly trivial patch adds an unamed union
with pointers to both svc_sock and svc_xprt. Ultimately the
union will be removed and only the rq_xprt field will remain. This
allows incrementally extracting transport independent interfaces without
one gigundo patch.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Make TCP and UDP svc_sock transports, and register them
with the svc transport core.
A transport type (svc_sock) has an svc_xprt as its first member,
and calls svc_xprt_init to initialize this field.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The transport class (svc_xprt_class) represents a type of transport, e.g.
udp, tcp, rdma. A transport class has a unique name and a set of transport
operations kept in the svc_xprt_ops structure.
A transport class can be dynamically registered and unregisterd. The
svc_xprt_class represents the module that implements the transport
type and keeps reference counts on the module to avoid unloading while
there are active users.
The endpoint (svc_xprt) is a generic, transport independent endpoint that can
be used to send and receive data for an RPC service. It inherits it's
operations from the transport class.
A transport driver module registers and unregisters itself with svc sunrpc
by calling svc_reg_xprt_class, and svc_unreg_xprt_class respectively.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch addresses a compatibility issue with a Linux NFS server and
AIX NFS client.
I have exported /export as fsid=0 with sec=krb5:krb5i
I have mount --bind /home onto /export/home
I have exported /export/home with sec=krb5i
The AIX client mounts / -o sec=krb5:krb5i onto /mnt
If I do an ls /mnt, the AIX client gets a permission error. Looking at
the network traceIwe see a READDIR looking for attributes
FATTR4_RDATTR_ERROR and FATTR4_MOUNTED_ON_FILEID. The response gives a
NFS4ERR_WRONGSEC which the AIX client is not expecting.
Since the AIX client is only asking for an attribute that is an
attribute of the parent file system (pseudo root in my example), it
seems reasonable that there should not be an error.
In discussing this issue with Bruce Fields, I initially proposed
ignoring the error in nfsd4_encode_dirent_fattr() if all that was being
asked for was FATTR4_RDATTR_ERROR and FATTR4_MOUNTED_ON_FILEID, however,
Bruce suggested that we avoid calling cross_mnt() if only these
attributes are requested.
The following patch implements bypassing cross_mnt() if only
FATTR4_RDATTR_ERROR and FATTR4_MOUNTED_ON_FILEID are called. Since there
is some complexity in the code in nfsd4_encode_fattr(), I didn't want to
duplicate code (and introduce a maintenance nightmare), so I added a
parameter to nfsd4_encode_fattr() that indicates whether it should
ignore cross mounts and simply fill in the attribute using the passed in
dentry as opposed to it's parent.
Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This header is used only in a few places in fs/nfsd, so there seems to
be little point to having it in include/. (Thanks to Robert Day for
pointing this out.)
Cc: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Newer server features such as nfsv4 and gss depend on proc to work, so a
failure to initialize the proc files they need should be treated as
fatal.
Thanks to Andrew Morton for style fix and compile fix in case where
CONFIG_NFSD_V4 is undefined.
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's really nothing much the caller can do if cache unregistration
fails. And indeed, all any caller does in this case is print an error
and continue. So just return void and move the printk's inside
cache_unregister.
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If the reply cache initialization fails due to a kmalloc failure,
currently we try to soldier on with a reduced (or nonexistant) reply
cache.
Better to just fail immediately: the failure is then much easier to
understand and debug, and it could save us complexity in some later
code. (But actually, it doesn't help currently because the cache is
also turned off in some odd failure cases; we should probably find a
better way to handle those failure cases some day.)
Fix some minor style problems while we're at it, and rename
nfsd_cache_init() to remove the need for a comment describing it.
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: For consistency, store the length of path name strings in nfsd
argument structures as unsigned integers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-By: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: adjust the sign of the length argument of nfsd_lookup and
nfsd_lookup_dentry, for consistency with recent changes. NFSD version
4 callers already pass an unsigned file name length.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-By: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: For consistency, store the length of file name strings in nfsd
argument structures as unsigned integers. This matches the XDR routines
and client argument structures for the same operation types.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-By: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
According to The Open Group's NLM specification, NLM callers are variable
length strings. XDR variable length strings use an unsigned 32 bit length.
And internally, negative string lengths are not meaningful for the Linux
NLM implementation.
Clean up: Make nlm_lock.len and nlm_reboot.len unsigned integers. This
makes the sign of NLM string lengths consistent with the sign of xdr_netobj
lengths.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-By: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
XDR strings, opaques, and net objects should all use unsigned lengths.
To wit, RFC 4506 says:
4.2. Unsigned Integer
An XDR unsigned integer is a 32-bit datum that encodes a non-negative
integer in the range [0,4294967295].
...
4.11. String
The standard defines a string of n (numbered 0 through n-1) ASCII
bytes to be the number n encoded as an unsigned integer (as described
above), and followed by the n bytes of the string.
After this patch, xdr_decode_string_inplace now matches the other XDR
string and array helpers that take a string length argument. See:
xdr_encode_opaque_fixed, xdr_encode_opaque, xdr_encode_array
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-By: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'audit.b46' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
[AUDIT] Add uid, gid fields to ANOM_PROMISCUOUS message
[AUDIT] ratelimit printk messages audit
[patch 2/2] audit: complement va_copy with va_end()
[patch 1/2] kernel/audit.c: warning fix
[AUDIT] create context if auditing was ever enabled
[AUDIT] clean up audit_receive_msg()
[AUDIT] make audit=0 really stop audit messages
[AUDIT] break large execve argument logging into smaller messages
[AUDIT] include audit type in audit message when using printk
[AUDIT] do not panic on exclude messages in audit_log_pid_context()
[AUDIT] Add End of Event record
[AUDIT] add session id to audit messages
[AUDIT] collect uid, loginuid, and comm in OBJ_PID records
[AUDIT] return EINTR not ERESTART*
[PATCH] get rid of loginuid races
[PATCH] switch audit_get_loginuid() to task_struct *
This patch setups correctly MIMO PS mode flags
Signed-off-by: Guy Cohen <guy.cohen@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
execve arguments can be quite large. There is no limit on the number of
arguments and a 4G limit on the size of an argument.
this patch prints those aruguments in bite sized pieces. a userspace size
limitation of 8k was discovered so this keeps messages around 7.5k
single arguments larger than 7.5k in length are split into multiple records
and can be identified as aX[Y]=
Signed-off-by: Eric Paris <eparis@redhat.com>
This patch adds an end of event record type. It will be sent by the kernel as
the last record when a multi-record event is triggered. This will aid realtime
analysis programs since they will now reliably know they have the last record
to complete an event. The audit daemon filters this and will not write it to
disk.
Signed-off-by: Steve Grubb <sgrubb redhat com>
Signed-off-by: Eric Paris <eparis@redhat.com>
In order to correlate audit records to an individual login add a session
id. This is incremented every time a user logs in and is included in
almost all messages which currently output the auid. The field is
labeled ses= or oses=
Signed-off-by: Eric Paris <eparis@redhat.com>
Keeping loginuid in audit_context is racy and results in messier
code. Taken to task_struct, out of the way of ->audit_context
changes.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
To allow the implementation of optimized rw-locks in user space, glibc
needs a possibility to select waiters for wakeup depending on a bitset
mask.
This requires two new futex OPs: FUTEX_WAIT_BITS and FUTEX_WAKE_BITS
These OPs are basically the same as FUTEX_WAIT and FUTEX_WAKE plus an
additional argument - a bitset. Further the FUTEX_WAIT_BITS OP is
expecting an absolute timeout value instead of the relative one, which
is used for the FUTEX_WAIT OP.
FUTEX_WAIT_BITS calls into the kernel with a bitset. The bitset is
stored in the futex_q structure, which is used to enqueue the waiter
into the hashed futex waitqueue.
FUTEX_WAKE_BITS also calls into the kernel with a bitset. The wakeup
function logically ANDs the bitset with the bitset stored in each
waiters futex_q structure. If the result is zero (i.e. none of the set
bits in the bitsets is matching), then the waiter is not woken up. If
the result is not zero (i.e. one of the set bits in the bitsets is
matching), then the waiter is woken.
The bitset provided by the caller must be non zero. In case the
provided bitset is zero the kernel returns EINVAL.
Internaly the new OPs are only extensions to the existing FUTEX_WAIT
and FUTEX_WAKE functions. The existing OPs hand a bitset with all bits
set into the futex_wait() and futex_wake() functions.
Signed-off-by: Thomas Gleixner <tgxl@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To allow better diagnosis of tick-sched related, especially NOHZ
related problems, we need to know when the last wakeup via an irq
happened and when the CPU left the idle state.
Add two fields (idle_waketime, idle_exittime) to the tick_sched
structure and add them to the timer_list output.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
xtime_cache needs to be updated whenever xtime and or wall_to_monotic
are changed. Otherwise users of xtime_cache might see a stale (and in
the case of timezone changes utterly wrong) value until the next
update happens.
Fixup the obvious places, which miss this update.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: kill swap_io_context()
as-iosched: fix inconsistent ioc->lock context
ide-cd: fix leftover data BUG
block: make elevator lib checkpatch compliant
cfq-iosched: make checkpatch compliant
block: make core bits checkpatch compliant
block: new end request handling interface should take unsigned byte counts
unexport add_disk_randomness
block/sunvdc.c:print_version() must be __devinit
splice: always updated atime in direct splice
It blindly copies everything in the io_context, including the lock.
That doesn't work so well for either lock ordering or lockdep.
There seems zero point in swapping io contexts on a request to request
merge, so the best point of action is to just remove it.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Add new "flow" classifier, which is meant to extend the SFQ hashing
capabilities without hard-coding new hash functions and also allows
deterministic mappings of keys to classes, replacing some out of tree
iptables patches like IPCLASSIFY (maps IPs to classes), IPMARK (maps
IPs to marks, with fw filters to classes), ...
Some examples:
- Classic SFQ hash:
tc filter add ... flow hash \
keys src,dst,proto,proto-src,proto-dst divisor 1024
- Classic SFQ hash, but using information from conntrack to work properly in
combination with NAT:
tc filter add ... flow hash \
keys nfct-src,nfct-dst,proto,nfct-proto-src,nfct-proto-dst divisor 1024
- Map destination IPs of 192.168.0.0/24 to classids 1-257:
tc filter add ... flow map \
key dst addend -192.168.0.0 divisor 256
- alternatively:
tc filter add ... flow map \
key dst and 0xff
- similar, but reverse ordered:
tc filter add ... flow map \
key dst and 0xff xor 0xff
Perturbation is currently not supported because we can't reliable kill the
timer on destruction.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for dumping statistics and make internal queues visible as
classes.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct ipv4_devconf can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
o Outbound sequence number overflow error status
is counted as XfrmOutStateSeqError.
o Additionaly, it changes inbound sequence number replay
error name from XfrmInSeqOutOfWindow to XfrmInStateSeqError
to apply name scheme above.
o Inbound IPv4 UDP encapsuling type mismatch error is wrongly
mapped to XfrmInStateInvalid then this patch fiex the error
to XfrmInStateMismatch.
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current ip route cache implementation is not suited to large caches.
We can consume a lot of CPU when cache must be invalidated, since we
currently need to evict all cache entries, and this eviction is
sometimes asynchronous. min_delay & max_delay can somewhat control this
asynchronism behavior, but whole thing is a kludge, regularly triggering
infamous soft lockup messages. When entries are still in use, this also
consumes a lot of ram, filling dst_garbage.list.
A better scheme is to use a generation identifier on each entry,
so that cache invalidation can be performed by changing the table
identifier, without having to scan all entries.
No more delayed flushing, no more stalling when secret_interval expires.
Invalidated entries will then be freed at GC time (controled by
ip_rt_gc_timeout or stress), or when an invalidated entry is found
in a chain when an insert is done.
Thus we keep a normal equilibrium.
This patch :
- renames rt_hash_rnd to rt_genid (and makes it an atomic_t)
- Adds a new rt_genid field to 'struct rtable' (filling a hole on 64bit)
- Checks entry->rt_genid at appropriate places :
Reuse the existing logic for multicast list synchronization for the
unicast address list. The core of dev_mc_sync/unsync are split out as
__dev_addr_sync/unsync and moved from dev_mcast.c to dev.c. These are
then used to implement dev_unicast_sync/unsync as well.
I'm working on cleaning up Intel's FCoE stack, which generates new MAC
addresses from the fibre channel device id assigned by the fabric as
per the current draft specification in T11. When using such a
protocol in a VLAN environment it would be nice to not always be
forced into promiscuous mode, assuming the underlying Ethernet driver
supports multiple unicast addresses as well.
Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Normally during a dump the key of the last dumped entry is used for
continuation, but since lock is dropped it might be lost. In that case
fallback to the old counter based N^2 behaviour. This means the dump
will end up skipping some routes which matches what FIB_HASH does.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a net argument to inet6_lookup and propagate it further.
Actually, this is tcp-v6 implementation of what was done for
tcp-v4 sockets in a previous patch.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have INET_MATCH, INET_TW_MATCH and INET6_MATCH to test sockets and
twbuckets for matching, but ipv6 twbuckets are tested manually.
Here's the INET6_TW_MATCH to help with it.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduces the xt_hashlimit match revision 1. It adds support for
kernel-level inversion and grouping source and/or destination IP
addresses, allowing to limit on a per-subnet basis. While this would
technically obsolete xt_limit, xt_hashlimit is a more expensive due
to the hashbucketing.
Kernel-level inversion: Previously you had to do user-level inversion:
iptables -N foo
iptables -A foo -m hashlimit --hashlimit(-upto) 5/s -j RETURN
iptables -A foo -j DROP
iptables -A INPUT -j foo
now it is simpler:
iptables -A INPUT -m hashlimit --hashlimit-over 5/s -j DROP
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
CHECK net/ipv4/netfilter/ip_tables.c
net/ipv4/netfilter/ip_tables.c:1453:8: warning: incorrect type in argument 3 (different signedness)
net/ipv4/netfilter/ip_tables.c:1453:8: expected int *size
net/ipv4/netfilter/ip_tables.c:1453:8: got unsigned int [usertype] *size
net/ipv4/netfilter/ip_tables.c:1458:44: warning: incorrect type in argument 3 (different signedness)
net/ipv4/netfilter/ip_tables.c:1458:44: expected int *size
net/ipv4/netfilter/ip_tables.c:1458:44: got unsigned int [usertype] *size
net/ipv4/netfilter/ip_tables.c:1603:2: warning: incorrect type in argument 2 (different signedness)
net/ipv4/netfilter/ip_tables.c:1603:2: expected unsigned int *i
net/ipv4/netfilter/ip_tables.c:1603:2: got int *<noident>
net/ipv4/netfilter/ip_tables.c:1627:8: warning: incorrect type in argument 3 (different signedness)
net/ipv4/netfilter/ip_tables.c:1627:8: expected int *size
net/ipv4/netfilter/ip_tables.c:1627:8: got unsigned int *size
net/ipv4/netfilter/ip_tables.c:1634:40: warning: incorrect type in argument 3 (different signedness)
net/ipv4/netfilter/ip_tables.c:1634:40: expected int *size
net/ipv4/netfilter/ip_tables.c:1634:40: got unsigned int *size
net/ipv4/netfilter/ip_tables.c:1653:8: warning: incorrect type in argument 5 (different signedness)
net/ipv4/netfilter/ip_tables.c:1653:8: expected unsigned int *i
net/ipv4/netfilter/ip_tables.c:1653:8: got int *<noident>
net/ipv4/netfilter/ip_tables.c:1666:2: warning: incorrect type in argument 2 (different signedness)
net/ipv4/netfilter/ip_tables.c:1666:2: expected unsigned int *i
net/ipv4/netfilter/ip_tables.c:1666:2: got int *<noident>
CHECK net/ipv4/netfilter/arp_tables.c
net/ipv4/netfilter/arp_tables.c:1285:40: warning: incorrect type in argument 3 (different signedness)
net/ipv4/netfilter/arp_tables.c:1285:40: expected int *size
net/ipv4/netfilter/arp_tables.c:1285:40: got unsigned int *size
net/ipv4/netfilter/arp_tables.c:1543:44: warning: incorrect type in argument 3 (different signedness)
net/ipv4/netfilter/arp_tables.c:1543:44: expected int *size
net/ipv4/netfilter/arp_tables.c:1543:44: got unsigned int [usertype] *size
CHECK net/ipv6/netfilter/ip6_tables.c
net/ipv6/netfilter/ip6_tables.c:1481:8: warning: incorrect type in argument 3 (different signedness)
net/ipv6/netfilter/ip6_tables.c:1481:8: expected int *size
net/ipv6/netfilter/ip6_tables.c:1481:8: got unsigned int [usertype] *size
net/ipv6/netfilter/ip6_tables.c:1486:44: warning: incorrect type in argument 3 (different signedness)
net/ipv6/netfilter/ip6_tables.c:1486:44: expected int *size
net/ipv6/netfilter/ip6_tables.c:1486:44: got unsigned int [usertype] *size
net/ipv6/netfilter/ip6_tables.c:1631:2: warning: incorrect type in argument 2 (different signedness)
net/ipv6/netfilter/ip6_tables.c:1631:2: expected unsigned int *i
net/ipv6/netfilter/ip6_tables.c:1631:2: got int *<noident>
net/ipv6/netfilter/ip6_tables.c:1655:8: warning: incorrect type in argument 3 (different signedness)
net/ipv6/netfilter/ip6_tables.c:1655:8: expected int *size
net/ipv6/netfilter/ip6_tables.c:1655:8: got unsigned int *size
net/ipv6/netfilter/ip6_tables.c:1662:40: warning: incorrect type in argument 3 (different signedness)
net/ipv6/netfilter/ip6_tables.c:1662:40: expected int *size
net/ipv6/netfilter/ip6_tables.c:1662:40: got unsigned int *size
net/ipv6/netfilter/ip6_tables.c:1680:8: warning: incorrect type in argument 5 (different signedness)
net/ipv6/netfilter/ip6_tables.c:1680:8: expected unsigned int *i
net/ipv6/netfilter/ip6_tables.c:1680:8: got int *<noident>
net/ipv6/netfilter/ip6_tables.c:1693:2: warning: incorrect type in argument 2 (different signedness)
net/ipv6/netfilter/ip6_tables.c:1693:2: expected unsigned int *i
net/ipv6/netfilter/ip6_tables.c:1693:2: got int *<noident>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ranges to the new revision. This doesn't affect
compatibility since the new revision was not released yet.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Propagate netns from userspace.
* arpt_register_table() registers table in supplied netns.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Propagate netns from userspace down to xt_find_table_lock()
* Register ip6 tables in netns (modules still use init_net)
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Typical table module registers xt_table structure (i.e. packet_filter)
and link it to list during it. We can't use one template for it because
corresponding list_head will become corrupted. We also can't unregister
with template because it wasn't changed at all and thus doesn't know in
which list it is.
So, we duplicate template at the very first step of table registration.
Table modules will save it for use during unregistration time and actual
filtering.
Do it at once to not screw bisection.
P.S.: renaming i.e. packet_filter => __packet_filter is temporary until
full netnsization of table modules is done.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In fact all we want is per-netns set of rules, however doing that will
unnecessary complicate routines such as ipt_hook()/ipt_do_table, so
make full xt_table array per-netns.
Every user stubbed with init_net for a while.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch from 0/-E to ptr/PTR_ERR convention.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the xt_conntrack match revision 1 by port matching (all four
{orig,repl}{src,dst}) and by packet direction matching.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before the removal of the deferred output hooks, netoutdev was used in
case of VLANs on top of a bridge to store the VLAN device, so the
deferred hooks would see the correct output device. This isn't
necessary anymore since we're calling the output hooks for the correct
device directly in the IP stack.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for combined mode algorithms with GCM being
the first algorithm supported.
Combined mode algorithms can be added through the xfrm_user interface
using the new algorithm payload type XFRMA_ALG_AEAD. Each algorithms
is identified by its name and the ICV length.
For the purposes of matching algorithms in xfrm_tmpl structures,
combined mode algorithms occupy the same name space as encryption
algorithms. This is in line with how they are negotiated using IKE.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move headers usbnet.h and rndis_host.h to include/linux/usb and fix includes
for drivers/net/usb modules. Headers are moved because rndis_wlan will be
outside drivers/net/usb in drivers/net/wireless and yet need these headers.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Teach rfkill about wimax radios.
Had to define a KEY_WIMAX as a 'key for disabling only wimax radios',
as other radio technologies have. This makes sense as hardware has
specific keys for disabling specific radios.
The RFKILL enabling part is, otherwise, a copy and paste of any other
radio technology.
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
Remove commented-out code copied from NFS
NFS: Switch from intr mount option to TASK_KILLABLE
Add wait_for_completion_killable
Add wait_event_killable
Add schedule_timeout_killable
Use mutex_lock_killable in vfs_readdir
Add mutex_lock_killable
Use lock_page_killable
Add lock_page_killable
Add fatal_signal_pending
Add TASK_WAKEKILL
exit: Use task_is_*
signal: Use task_is_*
sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
ptrace: Use task_is_*
power: Use task_is_*
wait: Use TASK_NORMAL
proc/base.c: Use task_is_*
proc/array.c: Use TASK_REPORT
perfmon: Use task_is_*
...
Fixed up conflicts in NFS/sunrpc manually..
bring back the avr32, blackfin, sh, sparc architectures into working order,
by reverting the effects of this change that came in via the x86 tree:
commit a5a19c63f4
Author: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed Jan 30 13:33:39 2008 +0100
x86: demacro asm-x86/pgalloc_32.h
Sorry about that!
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits)
[POWERPC] Cell IOMMU fixed mapping support
[POWERPC] Split out the ioid fetching/checking logic
[POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows
[POWERPC] Split out the IOMMU logic from cell_dma_dev_setup()
[POWERPC] Split cell_iommu_setup_hardware() into two parts
[POWERPC] Split out the logic that allocates struct iommus
[POWERPC] Allocate the hash table under 1G on cell
[POWERPC] Add set_dma_ops() to match get_dma_ops()
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
[POWERPC] 85xx: Only invalidate TLB0 and TLB1
[POWERPC] 83xx: Fix typo in mpc837x compatible entries
[POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall
[POWERPC] 83xx: rework platform Kconfig
[POWERPC] 85xx: rework platform Kconfig
[POWERPC] 86xx: Remove unused IRQ defines
[POWERPC] QE: Explicitly set address-cells and size cells for muram
[POWERPC] Convert StorCenter DTS file to /dts-v1/ format.
[POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format.
[PPC] Remove 85xx from arch/ppc
[PPC] Remove 83xx from arch/ppc
...
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
alpha: fix x86.git merge build error
ia64: on UP percpu variables are not small memory model
x86: fix arch/x86/kernel/test_nx.c modular build bug
s390: use generic percpu linux-2.6.git
POWERPC: use generic per cpu
ia64: use generic percpu
SPARC64: use generic percpu
percpu: change Kconfig to HAVE_SETUP_PER_CPU_AREA
modules: fold percpu_modcopy into module.c
x86: export copy_from_user_ll_nocache[_nozero]
x86: fix duplicated TIF on 64-bit
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
security: compile capabilities by default
selinux: make selinux_set_mnt_opts() static
SELinux: Add warning messages on network denial due to error
SELinux: Add network ingress and egress control permission checks
NetLabel: Add auditing to the static labeling mechanism
NetLabel: Introduce static network labels for unlabeled connections
SELinux: Allow NetLabel to directly cache SIDs
SELinux: Enable dynamic enable/disable of the network access checks
SELinux: Better integration between peer labeling subsystems
SELinux: Add a new peer class and permissions to the Flask definitions
SELinux: Add a capabilities bitmap to SELinux policy version 22
SELinux: Add a network node caching mechanism similar to the sel_netif_*() functions
SELinux: Only store the network interface's ifindex
SELinux: Convert the netif code to use ifindex values
NetLabel: Add IP address family information to the netlbl_skbuff_getattr() function
NetLabel: Add secid token support to the NetLabel secattr struct
NetLabel: Consolidate the LSM domain mapping/hashing locks
NetLabel: Cleanup the LSM domain hash functions
NetLabel: Remove unneeded RCU read locks
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
PPC: Fix powerpc vio_find_name to not use devices_subsys
Driver core: add bus_find_device_by_name function
Module: check to see if we have a built in module with the same name
x86: fix runtime error in arch/x86/kernel/cpu/mcheck/mce_amd_64.c
Driver core: Fix up build when CONFIG_BLOCK=N
ia64 has a special processor specific mapping that can be used to locate the
offset for the current per cpu area.
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Migrating the apic timer in the critical section is not very nice, and is
absolutely horrible with the real-time port. Move migration to the regular
vcpu execution path, triggered by a new bitflag.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
kvm_para.h potentially contains definitions that are to be used by userspace,
so it should not be included inside the __KERNEL__ block. To protect its own
data structures, kvm_para.h already includes its own __KERNEL__ block.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Acked-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves kvm_fpu asm-x86/kvm.h to allow every architecture to
define an own representation used for KVM_GET_FPU/KVM_SET_FPU.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Acked-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Convert the synchronization of the shadow handling to a separate mmu_lock
spinlock.
Also guard fetch() by mmap_sem in read-mode to protect against alias
and memslot changes.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
In preparation for a mmu spinlock, add kvm_read_guest_atomic()
and use it in fetch() and prefetch_page().
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This adds a mechanism for exposing the virtual apic tpr to the guest, and a
protocol for letting the guest update the tpr without causing a vmexit if
conditions allow (e.g. there is no interrupt pending with a higher priority
than the new tpr).
Signed-off-by: Avi Kivity <avi@qumranet.com>
Add a facility to report on accesses to the local apic tpr even if the
local apic is emulated in the kernel. This is basically a hack that
allows userspace to patch Windows which tends to bang on the tpr a lot.
Signed-off-by: Avi Kivity <avi@qumranet.com>
IA64 also needs to see ioapic structure in irqchip.
Signed-off-by: xiantao.zhang@intel.com <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Moving kvm_vcpu_kick() to x86.c. Since it should be
common for all archs, put its declarations in <linux/kvm_host.h>
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This paves the way for multiple architecture support. Note that while
ioapic.c could potentially be shared with ia64, it is also moved.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h>
includes, not existing. Rather than add a zillion <asm/kvm.h>s, export kvm.h
only if the arch actually supports it.
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch fixes a small issue where sturctures:
kvm_pic_state
kvm_ioapic_state
are defined inside x86 specific code and may or may not
be defined in anyway for other architectures. The problem
caused is one cannot compile userspace apps (ex. libkvm)
for other archs since a size cannot be determined for these
structures.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The current cpuid management suffers from several problems, which inhibit
passing through the host feature set to the guest:
- No way to tell which features the host supports
While some features can be supported with no changes to kvm, others
need explicit support. That means kvm needs to vet the feature set
before it is passed to the guest.
- No support for indexed or stateful cpuid entries
Some cpuid entries depend on ecx as well as on eax, or on internal
state in the processor (running cpuid multiple times with the same
input returns different output). The current cpuid machinery only
supports keying on eax.
- No support for save/restore/migrate
The internal state above needs to be exposed to userspace so it can
be saved or migrated.
This patch adds extended cpuid support by means of three new ioctls:
- KVM_GET_SUPPORTED_CPUID: get all cpuid entries the host (and kvm)
supports
- KVM_SET_CPUID2: sets the vcpu's cpuid table
- KVM_GET_CPUID2: gets the vcpu's cpuid table, including hidden state
[avi: fix original KVM_SET_CPUID not removing nx on non-nx hosts as it did
before]
Signed-off-by: Dan Kenigsberg <danken@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves structures:
kvm_cpuid_entry
kvm_cpuid
from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Move structures:
kvm_sregs
kvm_msr_entry
kvm_msrs
kvm_msr_list
from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves structures:
kvm_segment
kvm_dtable
from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves structure lapic_state from include/linux/kvm.h
to include/asm-x86/kvm.h
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves structure kvm_regs to include/asm-x86/kvm.h.
Each architecture will need to create there own version of this
structure.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves structures:
kvm_pic_state
kvm_ioapic_state
to inclue/asm-x86/kvm.h.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves sturct kvm_memory_alias from include/linux/kvm.h
to include/asm-x86/kvm.h. Also have include/linux/kvm.h include
include/asm/kvm.h.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Currently kvm has a wart in that it requires three extra pages for use
as a tss when emulating real mode on Intel. This patch moves the allocation
internally, only requiring userspace to tell us where in the physical address
space we can place the tss.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Currently kvm provides hypercalls only for x86* architectures. To
provide hypercall infrastructure for other kvm architectures I split
kvm_para.h into a generic header file and architecture specific
definitions.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instead of having the kernel allocate memory to the guest, let userspace
allocate it and pass the address to the kernel.
This is required for s390 support, but also enables features like memory
sharing and using hugetlbfs backed memory.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The user is now able to set how many mmu pages will be allocated to the guest.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch refactors the current hypercall infrastructure to better
support live migration and SMP. It eliminates the hypercall page by
trapping the UD exception that would occur if you used the wrong hypercall
instruction for the underlying architecture and replacing it with the right
one lazily.
A fall-out of this patch is that the unhandled hypercalls no longer trap to
userspace. There is very little reason though to use a hypercall to
communicate with userspace as PIO or MMIO can be used. There is no code
in tree that uses userspace hypercalls.
[avi: fix #ud injection on vmx]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch adds a new configuration option, which adds support for a new
early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch()
to decide wether OHCI-1394 FireWire controllers should be initialized and
enabled for physical DMA access to allow remote debugging of early problems
like issues ACPI or other subsystems which are executed very early.
If the config option is not enabled, no code is changed, and if the boot
paramenter is not given, no new code is executed, and independent of that,
all new code is freed after boot, so the config option can be even enabled
in standard, non-debug kernels.
With specialized tools, it is then possible to get debugging information
from machines which have no serial ports (notebooks) such as the printk
buffer contents, or any data which can be referenced from global pointers,
if it is stored below the 4GB limit and even memory dumps of of the physical
RAM region below the 4GB limit can be taken without any cooperation from the
CPU of the host, so the machine can be crashed early, it does not matter.
In the extreme, even kernel debuggers can be accessed in this way. I wrote
a small kgdb module and an accompanying gdb stub for FireWire which allows
to gdb to talk to kgdb using remote remory reads and writes over FireWire.
An version of the gdb stub fore FireWire is able to read all global data
from a system which is running a a normal kernel without any kernel debugger,
without any interruption or support of the system's CPU. That way, e.g. the
task struct and so on can be read and even manipulated when the physical DMA
access is granted.
A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt
and I've put a copy online at
ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt
It also has links to all the tools which are available to make use of it
another copy of it is online at:
ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff
Signed-Off-By: Bernhard Kaindl <bk@suse.de>
Tested-By: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
get more testing of the c_p_a() code done by not turning off
PSE on DEBUG_PAGEALLOC.
this simplifies the early pagetable setup code, and tests
the largepage-splitup code quite heavily.
In the end, all the largepages will be split up pretty quickly,
so there's no difference to how DEBUG_PAGEALLOC worked before.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Convert macros into inline functions, for better type-checking.
This patch required a little bit of fiddling with headers in order to
make __(pte|pmd)_free_tlb inline rather than macros.
asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly
use any pgalloc definitions. I removed this include to avoid an
include cycle, but it may cause secondary compile failures by things
depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one
such place; there may be others.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch defines the PCI identifiers found in
the RDC R-321x System-on-Chip.
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
They now look like:
hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000]
This makes it easier to pinpoint bugs to specific libraries.
And printing the offset into a mapping also always allows to find the
correct fault point in a library even with randomized mappings. Previously
there was no way to actually find the correct code address inside
the randomized mapping.
Relies on earlier patch to shorten the printk formats.
They are often now longer than 80 characters, but I think that's worth it.
[includes fix from Eric Dumazet to check d_path error value]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On VMs implemented using JITs that cache translated code changing the lock
prefixes is a quite costly operation that forces the JIT to throw away and
retranslate a lot of code.
Previously a SMP kernel would rewrite the locks once for each CPU which
is quite unnecessary. This patch changes the code to never switch at boot in
the normal case (SMP kernel booting with >1 CPU) or only once for SMP kernel
on UP.
This makes a significant difference in boot up performance on AMD SimNow!
Also I expect it to be a little faster on native systems too because a smp
switch does a lot of text_poke()s which each synchronize the pipeline.
v1->v2: Rename max_cpus
v1->v2: Fix off by one in UP check (Thomas Gleixner)
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The ENDPROCs() were not used everywhere. Some code used just END() instead,
while other code used nothing. um/sys-i386/checksum.S didn't #include
<linux/linkage.h> . I also got confused because gcc puts the
.type near the ENTRY, while ENDPROC puts it on the opposite end.
Signed off by: John Reiser <jreiser@BitWagon.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
introduce the "asmregparm" calling convention: for functions
implemented in assembly with a fixed regparm input parameters
calling convention.
mark the semaphore and rwsem slowpath functions with that.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Here is a quick and naive smoke test for kprobes. This is intended to
just verify if some unrelated change broke the *probes subsystem. It is
self contained, architecture agnostic and isn't of any great use by itself.
This needs to be built in the kernel and runs a basic set of tests to
verify if kprobes, jprobes and kretprobes run fine on the kernel. In case
of an error, it'll print out a message with a "BUG" prefix.
This is a start; we intend to add more tests to this bucket over time.
Thanks to Jim Keniston and Masami Hiramatsu for comments and suggestions.
Tested on x86 (32/64) and powerpc.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Special consideration for IA64: Add the ability to specify
arch specific per cpu flags
- remove .data.percpu attribute from DEFINE_PER_CPU for non-smp case.
The arch definitions are all the same. So move them into linux/percpu.h.
We cannot move DECLARE_PER_CPU since some include files just include
asm/percpu.h to avoid include recursion problems.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199317452 28800
# Node ID f7e7db3facd9406545103164f9be8f9ba1a2b549
# Parent 4d9a413a0f4c1d98dbea704f0366457b5117045d
x86: add _AT() macro to conditionally cast
Define _AT(type, value) to conditionally cast a value when compiling C
code, but not when used in assembler.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This makes ELF core dumps of 32-bit processes include a new
note type NT_386_TLS (0x200) giving the contents of the TLS
slots in struct user_desc format. This lets post mortem
examination figure out what the segment registers mean like
the debugger does with get_thread_area on a live process.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This adds a generic definition of compat_sys_ptrace that calls
compat_arch_ptrace, parallel to sys_ptrace/arch_ptrace. Some
machines needing this already define a function by that name.
The new generic function is defined only on machines that
put #define __ARCH_WANT_COMPAT_SYS_PTRACE into asm/ptrace.h.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This adds a compat_ptrace_request that is the analogue of ptrace_request
for the things that 32-on-64 ptrace implementations can share in common.
So far there are just a couple of requests handled generically.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This defines two new inlines in linux/regset.h, for use in arch_ptrace
implementations and the like. These provide simplified wrappers for using
the user_regset interfaces to copy thread regset data into the caller's
user-space memory. The inlines are trivial, but make the common uses in
places such as ptrace implementation much more concise, easier to read, and
less prone to code-copying errors.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This adds some inlines to linux/regset.h intended for arch code to use in
its user_regset get and set functions. These make it pretty easy to deal
with the interface's optional kernel-space or user-space pointers and its
generalized access to a part of the register data at a time.
In simple cases where the internal data structure matches the exported
layout (core dump format), a get function can be nothing but a call to
user_regset_copyout, and a set function a call to user_regset_copyin.
In other cases the exported layout is usually made up of a few pieces each
stored contiguously in a different internal data structure. These helpers
make it straightforward to write a get or set function by processing each
contiguous chunk of the data in order. The start_pos and end_pos arguments
are always constants, so these inlines collapse to a small amount of code.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The new header <linux/regset.h> defines the types struct user_regset and
struct user_regset_view, with some associated declarations. This new set
of interfaces will become the standard way for arch code to expose
user-mode machine-specific state. A single set of entry points into arch
code can do all the low-level work in one place to fill the needs of core
dumps, ptrace, and any other user-mode debugging facilities that might come
along in the future.
For existing arch code to adapt to the user_regset interfaces, each arch
can work from the code it already has to support core files and ptrace.
The formats you want for user_regset are the core file formats. The only
wrinkle in adapting old ptrace implementation code as user_regset get and
set functions is that these functions can be called on current as well as
on another task_struct that is stopped and switched out as for ptrace.
For some kinds of machine state, you may have to load it directly from CPU
registers or otherwise differently for current than for another thread.
(Your core dump support already handles this in elf_core_copy_regs for
current and elf_core_copy_task_regs for other tasks, so just check there.)
The set function should also be made to work on current in case that
entails some special cases, though this was never required before for
ptrace. Adding this flexibility covers the arch needs to open the door to
more sophisticated new debugging facilities that don't always need to
context-switch to do every little thing.
The copyin/copyout helper functions (in a later patch) relieve the arch
code of most of the cumbersome details of the flexible get/set interfaces.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
.. allowing to remove their declarations from a global include file
(the symbols don't exist for anything but x86).
Likewise for 64-bits' fix_processor_context(), just that that one was
properly declared in an arch-specific header.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The break_lock data structure and code for spinlocks is quite nasty.
Not only does it double the size of a spinlock but it changes locking to
a potentially less optimal trylock.
Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a
__raw_spin_is_contended that uses the lock data itself to determine whether
there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is
not set.
Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to
decouple it from the spinlock implementation, and make it typesafe (rwlocks
do not have any need_lockbreak sites -- why do they even get bloated up
with that break_lock then?).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This makes ptrace_request handle PTRACE_SINGLEBLOCK along with
PTRACE_CONT et al. The new generic code makes use of the
arch_has_block_step macro and generic entry points on machines
that define them.
[ mingo@elte.hu: bugfix ]
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This defines the new macro arch_has_block_step() in linux/ptrace.h, a
default for when asm/ptrace.h does not define it. This is the analog
of arch_has_single_step() for step-until-branch on machines that have
it. It declares the new user_enable_block_step function, which goes
with the existing user_enable_single_step and user_disable_single_step.
This is not used yet, but paves the way to harmonize on this interface
for the arch-specific calls on all machines.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This defines the new macro arch_has_single_step() in linux/ptrace.h, a
default for when asm/ptrace.h does not define it. It declares the new
user_enable_single_step and user_disable_single_step functions.
This is not used yet, but paves the way to harmonize on this interface
for the arch-specific calls on all machines.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch removes the extern struct resource declarations for
data_resource, code_resource and bss_resource on x86 and declares that
three structures as static as done on other architectures like IA64.
On i386, these structures are moved to setup_32.c (from e820_32.c) because
that's code that is not specific to e820 and also required on EFI systems.
That makes the "extern" reference superfluous.
On x86_64, data_resource, code_resource and bss_resource are passed to
e820_reserve_resources() as arguments just as done on i386 and IA64. That
also avoids the "extern" reference and it's possible to make it static.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Current idle time in kstat is based on jiffies and is coarse grained.
tick_sched.idle_sleeptime is making some attempt to keep track of idle time
in a fine grained manner. But, it is not handling the time spent in
interrupts fully.
Make tick_sched.idle_sleeptime accurate with respect to time spent on
handling interrupts and also add tick_sched.idle_lastupdate, which keeps
track of last time when idle_sleeptime was updated.
This statistics will be crucial for cpufreq-ondemand governor, which can
shed some conservative gaurd band that is uses today while setting the
frequency. The ondemand changes that uses the exact idle time is coming
soon.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The userspace API for the HPET (see Documentation/hpet.txt) did not work. The
HPET_IE_ON ioctl was failing as there was no IRQ assigned to the timer
device. This patch fixes it by allocating IRQs to timer blocks in the HPET.
arch/x86/kernel/hpet.c | 13 +++++--------
drivers/char/hpet.c | 45 ++++++++++++++++++++++++++++++++++++++-------
include/linux/hpet.h | 2 +-
3 files changed, 44 insertions(+), 16 deletions(-)
Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On x86 the PIT might become an unusable clocksource. Add an unregister
function to provide a possibilty to remove the PIT from the list of
available clock sources.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up hungarian notation from timer code.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Clean up: Follow recommendations of Chapter 5 of Documentation/CodingStyle
and use "u32" instead of "__u32" for types in definitions that are not
shared with user space.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RPC protocol version numbers are unsigned.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: pass 5 arguments to nlmclnt_init() in a structure similar to the
new nfs_client_initdata structure.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that each NFS mount point caches its own nlm_host structure, it can be
passed to nlmclnt_proc() for each lock request. By pinning an nlm_host for
each mount point, we trade the overhead of looking up or creating a fresh
nlm_host struct during every NLM procedure call for a little extra memory.
We also restrict the nlmclnt_proc symbol to limit the use of this call to
in-tree modules.
Note that nlm_lookup_host() (just removed from the client's per-request
NLM processing) could also trigger an nlm_host garbage collection. Now
client-side nlm_host garbage collection occurs only during NFS mount
processing. Since the NFS client now holds a reference on these nlm_host
structures, they wouldn't have been affected by garbage collection
anyway.
Given that nlm_lookup_host() reorders the global nlm_host chain after
every successful lookup, and that a garbage collection could be triggered
during the call, we've removed a significant amount of per-NLM-request
CPU processing overhead.
Sidebar: there are only a few remaining references to the internals of
NFS inodes in the client-side NLM code. The only references I found are
related to extracting or comparing the inode's file handle via NFS_FH().
One is in nlmclnt_grant(); the other is in nlmclnt_setlockargs().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cache an appropriate nlm_host structure in the NFS client's mount point
metadata for later use.
Note that there is no need to set NFS_MOUNT_NONLM in the error case -- if
nfs_start_lockd() returns a non-zero value, its callers ensure that the
mount request fails outright.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We would like to remove the per-lock-operation nlm_lookup_host() call from
nlmclnt_proc().
The new architecture pins an nlm_host structure to each NFS client
superblock that has the "lock" mount option set. The NFS client passes
in the pinned nlm_host structure during each call to nlmclnt_proc(). NFS
client unmount processing "puts" the nlm_host so it can be garbage-
collected later.
This patch introduces externally callable NLM functions that handle
mount-time nlm_host set up and tear-down.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: have the set up routines explicitly pass the strings to be used
for the transport name and NETID. This removes a number of conditionals
and dependencies on rpc_xprt.prot, which is overloaded.
Tighten up type checking on the address_strings array while we're at it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, if you have a server mounted using networking protocol, you
cannot specify a different value using the 'proto=' option on another
mountpoint.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In order to be able to support setting the timeo and retrans parameters on
a per-mountpoint basis, we move the rpc_timeout structure into the
rpc_clnt.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prepare for managing larger addresses in the NFS client by widening the
nfs_client struct's cl_addr field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
(Modified to work with the new parameters for nfs_alloc_client)
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The nfs_client's cl_ipaddr field needs to be larger to hold strings that
represent IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that the RPC buffer size specified for NFSv4 SETCLIENTID procedures
matches what we are encoding into the buffer. See the definition of
struct nfs4_setclientid {} and the encode_setclientid() function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Universal addresses are defined in RFC 1833 and clarified in RFC 3530. We
need to use them in several places in the NFS and RPC clients, so move the
relevant definition and block comment to an appropriate global include
file.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>