Commit graph

77 commits

Author SHA1 Message Date
Maik Hampel
b245fb675b myri10ge: SET_NETDEV_DEV()
SET_NETDEV_DEV() in myri10ge to create the "/sys/class/net/<if>/device"
symlink.

Signed-off-by: Maik Hampel <m.hampel@gmx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 08:24:51 -04:00
Brice Goglin
6f8a7c66e2 myri10ge: update driver version
Update myri10ge driver version to 1.3.1-1.248.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12 18:58:58 -04:00
Brice Goglin
798a95dbd3 myri10ge: report when the link partner is running in Myrinet mode
Since Myri-10G boards may also run in Myrinet mode instead of Ethernet,
add a message when we detect that the link partner is not running in the
right mode.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12 18:58:58 -04:00
Brice Goglin
f181137f9d myri10ge: limit the number of recoveries
Limit the number of recoveries from a NIC hw watchdog reset to 1 by default.
It enables detection of defective NICs immediately since these memory parity
errors are expected to happen very rarely (less than once per century*NIC).

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12 18:58:58 -04:00
Brice Goglin
6ffdd071e0 myri10ge: report link up/down in standard ethtool way
Report link up/down in standard ethtool way

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03 11:45:47 -04:00
Brice Goglin
5443e9ead4 myri10ge: replace the chipset whitelist with firmware autodetection
Remove the aligned-completion whitelist, and replace it by using the 1.4.16
firmware's auto-detection features to choose which firmware to load.
The driver now loads the aligned firmware, performs a MXGEFW_CMD_UNALIGNED_TEST,
and falls back to using the unaligned firmware if:
- The firmware is too old (ie, MXGEFW_CMD_UNALIGNED_TEST is an unknown command).
- The MXGEFW_CMD_UNALIGNED_TEST returns MXGEFW_CMD_ERROR_UNALIGNED, meaning
  that it has seen an unaligned completion during the DMA test.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08 01:15:15 -04:00
Brice Goglin
0d6ac257ab myri10ge: move the DMA test code into its own function
Move the DMA test code into its own function.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08 01:15:15 -04:00
Brice Goglin
2f76216fe0 myri10ge: fix restoring of multicast list after reset
Don't count on whatever implementation artifact preserves the
multicast list across a reset cmd, and setup multicast filtering
as part of our reset routine.

The setting of allmulti when adopting firmware with the rx-filter
broadcast bug is also moved into the multicast setup routine where
it belongs.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08 01:15:15 -04:00
Brice Goglin
cee505db24 myri10ge: support new firmware counters
Add dropped_pause, dropped_bad_phy, dropped_bad_crc32,
dropped_unicast_filtered to the set of ethtool counters.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-08 01:15:14 -04:00
Arnaldo Carvalho de Melo
27d7ff46a3 [SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}
To clearly state the intent of copying to linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25 22:28:29 -07:00
Arnaldo Carvalho de Melo
ab6a5bb6b2 [TCP]: Introduce tcp_hdrlen() and tcp_optlen()
The ip_hdrlen() buddy, created to reduce the number of skb->h.th-> uses and to
avoid the longer, open coded equivalent.

Ditched a no-op in bnx2 in the process.

I wonder if we should have a BUG_ON(skb->h.th->doff < 5) in tcp_optlen()...

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:24 -07:00
Arnaldo Carvalho de Melo
ea2ae17d64 [SK_BUFF]: Introduce skb_transport_offset()
For the quite common 'skb->h.raw - skb->data' sequence.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:16 -07:00
Arnaldo Carvalho de Melo
4c13eb6657 [ETH]: Make eth_type_trans set skb->dev like the other *_type_trans
One less thing for drivers writers to worry about.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:30 -07:00
Brice Goglin
4b2281c7aa myri10ge: update driver version to 1.3.0-1.233
Update the myri10ge driver version number to 1.3.0-1.233.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11 11:54:44 -04:00
Brice Goglin
f19baaeaad myri10ge: more Intel chipsets providing aligned PCIe completions
Add the Intel 5000 southbridge (aka Intel 6310/6311/6321ESB) PCIe ports
and the Intel E30x0 chipsets to the whitelist of aligned PCIe completion.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11 11:54:44 -04:00
Brice Goglin
ae8509b187 myri10ge: fix management of the firmware 4KB boundary crossing restriction
Simpler way of dealing with the firmware 4KB boundary crossing
restriction for rx buffers.  This fixes a variety of memory
corruption issues when using an "uncommon" MTU with a 16KB
page size.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11 11:54:44 -04:00
Brice Goglin
917690cd03 myri10ge: correctly detect when TSO should be used
Correctly detect when TSO should be used on transmit by looking at the
skb->gso_size rather than seeing if the frame was larger than our MTU.
The old method causes problems when a host with a large (jumbo) MTU is
sending to a host with a small (standard) MTU.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28 02:18:50 -04:00
Brice Goglin
2ea34672f8 myri10ge: update driver version to 1.3.0-1.226
Driver version is now 1.3.0-1.226.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23 01:48:35 -04:00
Brice Goglin
b52a8b7f0a myri10ge: fix management of >4kB allocated pages
Fix management of allocated physical pages when the architecture
page size is not 4kB since the firmware cannot cross 4K boundary.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23 01:48:35 -04:00
Brice Goglin
f761fae1ae myri10ge: update wcfifo and intr_coal_delay default values
Update the default value of 2 module parameters:
* wcfifo disabled
* intr_coal_delay 75us

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23 01:48:35 -04:00
Brice Goglin
aafa70eb56 myri10ge: Serverworks HT2100 provides aligned PCIe completion
[PATCH 1/4] myri10ge: Serverworks HT2100 provides aligned PCIe completion

Use the regular firmware on Serverworks HT2100 PCIe ports since this
chipset provides aligned PCIe completion.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23 01:48:34 -04:00
Brice Goglin
276e26c316 myri10ge: add a wc_enabled flag to myri10ge_priv
Add a wc_enabled flag in the myri10ge_priv instead of relying
on mtrr >= 0.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09 11:51:32 -05:00
Brice Goglin
4c882dd808 myri10ge: prevent 4k rdma on SGI TIOCE chipset
Do not use 4k rdma request on SGI TIOCE chipset since this
bridge does not support it.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09 11:51:32 -05:00
Brice Goglin
34fdccea93 myri10ge: use pci_map_page to prepare the dmatest buffer
Allocate a specific page and use pci_map_page for dma test instead
of relying on another existing buffer.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09 11:51:32 -05:00
Brice Goglin
355c7265f4 myri10ge: fix error checking and return value in myri10ge_allocate_rings
Fix a missing error check in myri10ge_allocate_rings() and set status
to -ENOMEM before all actual allocations so that the error path returns
what it should.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09 11:51:31 -05:00
Brice Goglin
4a2e612a3b myri10ge: fix copyright and license
Fix copyright and license ("regents" should not have ever been used).

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 19:55:07 -05:00
Brice Goglin
9dc6f0e789 myri10ge: workaround buggy adopted firmwares
Work around a bug which occurs when adopting firmware versions
1.4.4 though 1.4.11 where broadcasts are filtered as if they
were multicasts.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 04:16:04 -05:00
Arjan van de Ven
1d39ed565c remove NETIF_F_TSO ifdefery
Remove the NETIF_F_TSO #ifdef-ery in drivers/net; this was
for old-old-2.4 compat (even current 2.4 has NETIF_F_TSO)
but it's time to get rid of it by now.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:45 -05:00
Brice Goglin
b2db8dd4fd myri10ge: update driver version to 1.2.0
Driver is now at version 1.2.0.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-18 12:02:41 -05:00
Brice Goglin
21d05db175 myri10ge: check that we can get an irq
Now that IRQ allocation is done in myri10ge_open(), we want to still
check when loading the driver that IRQ allocation could succeed later.

Additionaly, we fix the initialization and printing of netdev->irq.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-18 12:02:41 -05:00
Brice Goglin
6ebc087a10 myri10ge: make wc_fifo usage load-time tunable
Under some circumstances, using WC without the WC fifo is faster.
So we make it possible to tune wc_fifo with a module parameter.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-18 12:02:41 -05:00
Brice Goglin
1a63e846a4 myri10ge: handle failures in suspend and resume
On suspend, handle pci_set_power_state errors, and on resume
handle failures in pci_resume_state().

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 16:28:20 -05:00
Brice Goglin
83f6e15245 myri10ge: no need to save MSI and PCIe state in the driver
The PCI MSI and express state are already saved and restored by the
current versions of pci_save_state/pci_restore_state.
Therefore it is no longer necessary for the driver to do it.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 16:28:20 -05:00
Brice Goglin
3621cec5b5 myri10ge: make msi configurable at runtime through sysfs
Now that IRQ are requested is called on open() and freed on close(),
we can safely switch from/to MSI without unloading the module.

We are guaranteed to correctly free IRQ even if the sysfs file got
written in the meantime since the MSI initialization is stored in
mgp->msi_enabled.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 16:28:20 -05:00
Brice Goglin
df30a740e4 myri10ge: move request_irq to myri10ge_open
Request IRQ in myri10ge_open() and free in close() instead of probe()
and remove() to eliminate potential race between the watchdog and the
interrupt handler. Additionaly, the interrupt handler won't get called
on shared irq anymore when the interface is down.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 16:28:20 -05:00
Brice Goglin
7adda30c82 myri10ge: match number of save_state and restore
Since pci_save_state() pushes MSI and PCIe states on a kind of stack,
myri10ge saving the state in advance for parity recovery will push the
state again on the stack on suspend. This leads to some memory leak.
We add a couple additional calls to save_state and restore_state so
that we don't leak anymore.

For the future, we are thinking of a better way to recover from parity
error without using pci_save_state().

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 16:28:20 -05:00
Brice Goglin
5796df1982 [PATCH] myri10ge: update driver version to 1.1.0
Update driver version to 1.1.0.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11 09:54:07 -05:00
Brice Goglin
13348beee5 [PATCH] myri10ge: fix big_bytes in case of vlan frames
Fix sizing of big_bytes in the case of vlan frames. The 4
VLAN_HLEN bytes were omitted, leading to sizing the big buffer
4 bytes smaller than it should be.  Due to how rx buffers are
carved from pages, this was harmless for the common (9000, 1500)
byte MTUs, but could lead to data corruption for some MTUs.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11 09:54:06 -05:00
Brice Goglin
de3c450704 [PATCH] myri10ge: Full vlan frame in small_bytes
Receive full vlan frames into smalls when running with a jumbo MTU.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11 09:54:06 -05:00
Brice Goglin
52ea6fb39b [PATCH] myri10ge: drop contiguous skb routines
Drop the old routines that used the physically contigous skb now
that we use the physical pages. And rename myri10ge_page_rx_done()
to myri10ge_rx_done() as it was previously.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11 09:54:06 -05:00
Brice Goglin
c7dab99b08 [PATCH] myri10ge: switch to page-based skb
Switch to physical page skb, by calling the new page-based
allocation routines and using myri10ge_page_rx_done().

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11 09:54:06 -05:00
Brice Goglin
dd50f3361f [PATCH] myri10ge: add page-based skb routines
Add physical page skb allocation routines and page based rx_done,
to be used by upcoming patches.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11 09:54:06 -05:00
Brice Goglin
6250223e05 [PATCH] myri10ge: indentation cleanups
Indentation cleanups to synchronize to our tree which is automatically
indent'ed.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11 09:54:06 -05:00
Brice Goglin
e67bda55e2 [PATCH] myri10ge: write as 2 32-byte blocks in myri10ge_submit_8rx
In the myri10ge_submit_8rx() routine, write the 64 byte request block as
2 32-byte blocks so that it is handled by the hardware pio write handler
if write-combining is enabled.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07 04:59:20 -05:00
Jeff Garzik
8d1413b280 Merge branch 'master' into upstream
Conflicts:

	drivers/net/netxen/netxen_nic.h
	drivers/net/netxen/netxen_nic_main.c
2006-12-07 04:57:19 -05:00
David Howells
4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00
Al Viro
40f6cff5c4 [PATCH] myri10ge annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-04 16:07:23 -05:00
Al Viro
ff1dcadb1b [NET]: Split skb->csum
... into anonymous union of __wsum and __u32 (csum and csum_offset resp.)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:27:18 -08:00
David Howells
c4028958b6 WorkStruct: make allyesconfig
Fix up for make allyesconfig.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
Brice Goglin
1e7bed0819 [PATCH] myri10ge: ServerWorks HT2000 PCI id is already defined in pci_ids.h
No need to keep defining PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE
in the driver code since it is now defined in pci_ids.h.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-31 20:22:05 -05:00