Commit graph

14 commits

Author SHA1 Message Date
Heiko Stuebner
35cc3cea2c ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450
The ADC of the S3C2416/2450 SoC is 10 or 12 bit wide, has its
source selection in the register base+0x18 and its width
selection in bit 03 of the ADCCON register.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-14 15:15:42 +09:00
Heiko Stuebner
6247cea2b9 ARM: SAMSUNG: Add support s3c2443-adc for S3C2443
The S3C2443-adc is 10 bit wide and has its mux-select
in an extra register at base+0x18

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-14 15:15:18 +09:00
Heiko Stuebner
df303e0236 ARM: SAMSUNG: Fix mux bit modification in s3c_adc_select
The mux bits in the adccon register should be cleared only
if muxing is really done in ADCCON and not another register.

This patch introduces a conditional for this.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-12 21:34:41 +09:00
MyungJoo Ham
67dcaec8d6 ARM: SAMSUNG: Revise PM for 12-bit ADC operations
- Fixed: 12bit precision is lost at suspend/resume
- Updated: use pm_dev_ops

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20 23:39:12 +09:00
MyungJoo Ham
64df92ea78 ARM: SAMSUNG: ADC Channel selection
In S5PV210/S5PC110/EXYNOS4, ADCMUX channel selection uses ADCMUX
register, not ADCCON register. This patch corrects the behavior of
SAMSUNG-ADC for such CPUs.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20 23:39:04 +09:00
MyungJoo Ham
f462904ef1 ARM: SAMSUNG: use regulator VDD for ADC
This patch allows the Samsung ADC driver to enable VDD regulator
at probe and resume and to disable at exit and suspend.
In a platform where ADC's VDD regulator is not "always-on", this
control is required although this patch does not provide fine-grained
power control (turning on the regulator only when being accessed).

However, if VDD regulator ("vdd" for the adc device) is not provided,
the regulator control will not be activated because there are platforms
that do not provide regulator for ADC device.

arch_initcall has been modified to module_init in order to allow
regulators to be available at probe.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-20 23:38:50 +09:00
Kukjin Kim
1a95036465 ARM: SAMSUNG: Fix build warnings because of unused codes
This patch removes following unused codes for removing build warnings.

arch/arm/plat-samsung/adc.c:438: warning: unused variable 'flags'
arch/arm/mach-s5pv210/clock.c:176: warning: 's5pv210_clk_ip4_ctrl' defined but not used

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-08 13:50:17 +09:00
Ben Dooks
1f1f584c9a ARM: SAMSUNG: Make ADC client SMP safe
Change local_irq disable calls to use spinlocks to ensure that the
ADC driver data is protected against multiple access..

Note, this does not protect the client's data, and the client should
ensure it does not make multiple calls to the ADC driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20 21:05:49 +09:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Vasily Khoruzhick
a0af8b3c70 ARM: SAMSUNG: adc: disable/enable IRQ on suspend/resume
IRQ should be disabled on suspend and re-enabled on resume.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24 01:52:14 +00:00
Maurus Cuelenaere
91492b4a04 ARM: SAMSUNG: Add support for 12bit ADC
The S3C64XX SoC series support 12bit ADC data, enable this and
mask the data accordingly.

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-03 01:55:04 +00:00
Maurus Cuelenaere
f6b56704f7 ARM: SAMSUNG: Fix null pointer dereference in ADC driver
ARM: SAMSUNG: Fix null pointer dereference in ADC driver

Use struct adc_device instead of relying on client (which could be
NULL) when checking for SoC type.

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26 09:50:03 +09:00
Maurus Cuelenaere
bcedfa98d9 ARM: S3C64XX: Add S3C64XX support to the generic Samsung ADC driver
Add S3C64XX support to the generic Samsung ADC driver

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-18 09:30:49 +09:00
Maurus Cuelenaere
3929e1e76d ARM: SAMSUNG: Move S3C24XX ADC driver to plat-samsung
Move S3C24XX ADC driver to plat-samsung

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-18 09:30:49 +09:00
Renamed from arch/arm/plat-s3c24xx/adc.c (Browse further)