Commit graph

37 commits

Author SHA1 Message Date
Paul Gortmaker
da155d5b40 sound: Add module.h to the previously silent sound users
Lots of sound drivers were getting module.h via the implicit presence
of it in <linux/device.h> but we are going to clean that up.  So
fix up those users now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:21 -04:00
Clemens Ladisch
dba8b46992 ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive:  To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero.  At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller.  This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.

With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.

This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter.  As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 11:00:51 +02:00
Takashi Iwai
934c2b6d0c ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*
The name argument of request_irq() appears in /proc/interrupts, and
it's quite ugly when the name entry contains a space or special letters.
In general, it's simpler and more readable when the module name appears
there, so let's replace all entries with KBUILD_MODNAME.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:36:37 +02:00
Takashi Iwai
3733e424c4 ALSA: Use KBUILD_MODNAME for pci_driver.name entries
The convention for pci_driver.name entry in kernel drivers seem to be
the module name or equivalent ones.  But, so far, almost all PCI sound
drivers use more verbose name like "ABC Xyz (12)", and these are fairly
confusing when appearing as a file name.

This patch converts the all pci_driver.name entries in sound/pci/* to
use KBUILD_MODNAME for more unified appearance.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:20:20 +02:00
Takashi Iwai
a5ba6beb83 ALSA: riptide - Fix detection / load of firmware files
The detection and loading of firmeware on riptide driver has been broken
due to rewrite of some codes, checking the presense wrongly.
This patch fixes the logic again.

Reference: kernel bug 16596
	https://bugzilla.kernel.org/show_bug.cgi?id=16596

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-16 08:08:48 +02:00
Kulikov Vasiliy
68bf57001f ALSA: riptide: check kzalloc() result
If kzalloc() fails exit with -ENOMEM.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-19 17:59:26 +02:00
Andy Shevchenko
c9ff921abe ALSA: alsa: riptide: don't use own hex_to_bin() method
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-17 09:34:58 +02:00
Dan Carpenter
282572b5ab ALSA: riptide: clean up while loop
If getpaths() returned an odd number this would be a buffer under-run and an
endless loop.  It turns out that getpaths() can only return even numbers, but
let's make it easy for people auditing code.  With the new code you don't
need to look at getpaths().

This silences a smatch warning.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-03 22:41:42 +01:00
Takashi Iwai
7fb3a069bc Merge branch 'fix/misc' into topic/misc
Conflicts:
	sound/pci/hda/patch_realtek.c
2010-02-17 14:24:46 +01:00
Alexey Dobriyan
cebe41d4b8 sound: use DEFINE_PCI_DEVICE_TABLE
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to
.devinit.rodata section, so they can be discarded in some cases,
and make them const.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-09 11:08:33 +01:00
Roel Kluin
9980c6209e ALSA: test off by one in setsamplerate()
With `while (i++ < MAX_WRITE_RETRY)' i reaches MAX_WRITE_RETRY + 1 after the loop

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-28 12:14:39 +01:00
Jaswinder Singh Rajput
cb65c8732a ALSA: riptide - proper handling of pci_register_driver for joystick
We need to check returning error for pci_register_driver(&joystick_driver)

On failure, we should unregister formerly registered audio drivers

This also fixed the compiler warning :

  CC [M]  sound/pci/riptide/riptide.o
 sound/pci/riptide/riptide.c: In function ‘alsa_card_riptide_init’:
 sound/pci/riptide/riptide.c:2200: warning: ignoring return value of ‘__pci_register_driver’, declared with attribute warn_unused_result

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 14:00:40 +02:00
Takashi Iwai
db1005ec6f ALSA: riptide - Fix joystick resource handling
The current code doesn't handle the multiple gameports properly,
and uses unnecessary global static variables to store the data.
This patch changes the probe / remove routines to use the driver
data assigned to the dedicated pci device, and adds the support of
multiple devices.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-26 13:55:42 +02:00
Takashi Iwai
a693a26fe0 ALSA: riptide - Code clean up
A code clean up, coding style fixes.
The firmware loading routine is split to an own function to improve
the readability.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-26 12:58:58 +02:00
Roel Kluin
1b1cc7f21c ALSA: riptide: postfix increment and off by one
With a postfix increment these variables are incremented beyond
CMDIF_TIMEOUT / MAX_WRITE_RETRY.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14 08:41:40 +02:00
Takashi Iwai
e58de7baf7 ALSA: Convert to snd_card_create() in sound/pci/*
Convert from snd_card_new() to the new snd_card_create() function
in sound/pci/*.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12 15:20:55 +01:00
Takashi Iwai
8afabfa74b Merge branch 'topic/convert-tasklet' into to-push 2008-12-25 11:40:27 +01:00
Takashi Iwai
1f04128a3d ALSA: hda - Convert from takslet_hi_schedule() to tasklet_schedule()
Replace all tasklet_hi_schedule() callers with the normal
tasklet_schedule().  The former often causes troubles with
RT-kernels, and has actually no merit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-18 12:17:55 +01:00
Peter Gruber
0f620830db ALSA: Reduce stall detection timeout in riptide.c
Reduce the command timeout to 0.5sec. Should be enough to allow a
working command interface but removes a RCU stall and slow resume on
some revisions where the AC97 revision detection stalls in resume.

Signed-off-by: Peter Gruber <nokos@gmx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-03 15:49:42 +01:00
Takashi Iwai
77a23f2695 ALSA: Clean up SG-buffer helper functions and macros
Clean up SG-buffer helper functions and macros.  Helpers take substream
as arguments now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25 09:57:18 +02:00
Takashi Iwai
da3cec35dd ALSA: Kill snd_assert() in sound/pci/*
Kill snd_assert() in sound/pci/*, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13 11:46:38 +02:00
David Woodhouse
93a9c901c8 riptide: treat firmware data as const
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:26:07 +01:00
Harvey Harrison
0cd87b10ca [ALSA] sound: riptide.c fix shadowed variable warnings
In both cases we are passing around the substream number, use
sub_num for this.
sound/pci/riptide/riptide.c:1633:6: warning: symbol 'index' shadows an earlier one
sound/pci/riptide/riptide.c:121:12: originally declared here
sound/pci/riptide/riptide.c:1673:6: warning: symbol 'index' shadows an earlier one
sound/pci/riptide/riptide.c:121:12: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:18 +02:00
Takashi Iwai
9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Clemens Ladisch
7e0af29d6f [ALSA] add MODULE_FIRMWARE entries
Add MODULE_FIRMWARE() entries, where appropriate.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:56:14 +02:00
Takashi Iwai
c187c041c6 [ALSA] Add missing sysfs device assignment for ALSA PCI drivers
Added the missing sysfs device assignment for ALSA PCI drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-03-06 10:40:29 +01:00
Takashi Iwai
437a5a4606 [ALSA] Remove IRQF_DISABLED for shared PCI irqs
Fix IRQ flags for PCI devices.
The shared IRQs for PCI devices shouldn't be allocated with
IRQF_DISABLED.  Also, when MSI is enabled, IRQF_SHARED shouldn't
be used.
The patch removes unnecessary cast in request_irq and free_irq,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20 08:55:57 +01:00
Takashi Iwai
30b35399ce [ALSA] Various fixes for suspend/resume of ALSA PCI drivers
- Check the return value of pci_enable_device() and request_irq()
  in the suspend.  If any error occurs there, disable the device
  using snd_card_disconnect().
- Call pci_set_power_state() properly with pci_choose_state().
- Fix the order to call pci_set_power_state().
- Removed obsolete house-made PM codes in some drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-22 10:51:10 +02:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Clemens Ladisch
adf75dcab1 [ALSA] riptide: fix compile errors with older gcc
Change the syntax of a union initialization that is not understood by
gcc 2.x.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:41:42 +02:00
Takashi Iwai
f40b68903c [ALSA] Fix section mismatch errors in ALSA PCI drivers
Fixed 'section mismatch' errors in ALSA PCI drivers:
- removed invalid __devinitdata from pci id tables
- fix/remove __devinit of functions called in suspend/resume

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-12 20:08:01 +02:00
Thomas Gleixner
65ca68b300 [PATCH] irq-flags: sound: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:54 -07:00
Takashi Iwai
0a50d2b295 [ALSA] Fix possible races in PCI driver removal
Call free_irq() before releasing others to avoid races when
shared irq is issued.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:34:08 +02:00
Takashi Iwai
bf850204a7 [ALSA] Remove unneeded read/write_size fields in proc text ops
Remove unneeded read/write_size fields in proc text ops.
snd_info_set_text_ops() is fixed, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:33:09 +02:00
Henrik Kretzschmar
396c9b928d [ALSA] add __devinitdata to all pci_device_id
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-27 21:10:34 +02:00
Takashi Iwai
43560116d1 [ALSA] Remove obsolete kfree_nocheck call
Fixed the compilation, removing obsolete kfree_nocheck() call
for memory debugging.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:58 +02:00
Peter Gruber
109a9638f0 [ALSA] Add snd-riptide driver for Conexant Riptide chip
Add snd-riptide driver for Conexant Riptide chip by Peter Gruber.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31 17:58:57 +02:00