Commit graph

610 commits

Author SHA1 Message Date
Fabio Estevam
5f85e93127 ARM: mx51/sdma: Check the chip revision in run-time
Check the MX51 chip revision in run-time so that the correct SDMA firmware can
be loaded.

While at it also remove the silicon revision from the sdma_script_start_addrs
structure name for MX51. All the MX51 revisions share the same SDMA start addresses.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-06-06 09:50:04 +02:00
Linus Torvalds
42cd71bf1e Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits)
  ARM: bcmring: convert to use sp804 clockevents
  ARM: bcmring: convert to sp804 clocksource
  ARM: 6912/1: bcmring: Add clkdev table in init_early
  clockevents: ARM sp804: obtain sp804 timer rate via clks
  clockevents: ARM sp804: allow clockevent name to be specified
  clocksource: ARM sp804: obtain sp804 timer rate via clks
  clocksource: ARM sp804: allow clocksource name to be specified
  clocksource: convert OMAP1 to 32-bit down counting clocksource
  clocksource: convert MXS timrotv2 to 32-bit down counting clocksource
  clocksource: convert SPEAr platforms 16-bit up counting clocksource
  clocksource: convert Integrator/AP 16-bit down counting clocksource
  clocksource: convert W90x900 24-bit down counting clocksource
  clocksource: convert ARM 32-bit down counting clocksources
  clocksource: convert ARM 32-bit up counting clocksources
  clocksource: add common mmio clocksource
  ARM: update sa1100 to reflect PXA updates
  ARM: omap1: convert to using readl/writel instead of volatile struct
  ARM: omap1: delete useless interrupt handler
  ARM: s5p: consolidate selection of timer register
  ARM: 6939/1: fix missing 'cpu_relax()' declaration
  ...
2011-05-23 15:15:27 -07:00
Russell King
9a55d9752d Merge branch 'devel-stable' into for-linus
Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-ns9xxx/include/mach/uncompress.h
2011-05-23 19:28:04 +01:00
Russell King
bfe45e0be8 clocksource: convert ARM 32-bit down counting clocksources
Convert SP804, MXC, Nomadik and Orion 32-bit down-counting clocksources
to generic mmio clocksource infrastructure.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Alessandro Rubini <rubini@unipv.it>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23 18:04:51 +01:00
Russell King
234b6ceddb clocksource: convert ARM 32-bit up counting clocksources
Convert ixp4xx, lpc32xx, mxc, netx, pxa, sa1100, tcc8k, tegra and u300
to use the generic mmio clocksource recently introduced.

Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: "Hans J. Koch" <hjk@hansjkoch.de>
Acked-by: Colin Cross <ccross@android.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Olof Johansson <olof@lixom.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23 18:04:51 +01:00
Linus Torvalds
57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
Russell King
c721be2807 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2011-05-20 10:38:27 +01:00
Uwe Kleine-König
27ad4bf72a ARM: imx: move mx3 support to mach-imx
Fixing a few "please, no space before tabs" and "empty line at end of
file" warnings on the way.

LAKML-Reference: 1299271882-2130-6-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:38 +02:00
Uwe Kleine-König
7f5e6b089d ARM: imx: remove some deprecated and unused #defines
LAKML-Reference: 1302464943-20721-6-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:33 +02:00
Uwe Kleine-König
d286a43aa2 ARM: mx3: make ioremap quirk ready for multi-SoC kernels
To be able to compile e.g. i.MX31 and i.MX51 in a single kernel image
the ioremap quirk needs a runtime check.

While touching this code make the comment more understandable by adding
a sentence from the commit log that introduced it
(eadefef ([ARM] MX3: Use ioremap wrapper to map SoC devices nonshared)).

As mach/io.h now uses cpu_is_ some header reshuffling in mach/hardware.h
was necessary. (mach/mx27.h and mach/mx31.h #include <linux/io.h> which
#includes <mach/io.h>. So mach/mxc.h which provides the cpu_is_ macros
needs to be included before mach/mx27.h and mach/mx31.h.)

LAKML-Reference: 1302464943-20721-5-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:32 +02:00
Uwe Kleine-König
7db4d88206 ARM: mxc: don't allow to compile together i.MX51 and i.MX53
The two SoCs have different PHYS_OFFSETs so it's not (yet) possible to
compile a single (working) kernel for these.

LAKML-Reference: 1302464943-20721-4-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:30 +02:00
Uwe Kleine-König
91350f6677 ARM: mxc: don't use the symbols in the CPU family choice to select others
The symbols in this choice should only be used to select between the
available machines that can be built into a single kernel. As these sets
(will) differ e.g. depending on ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR
letting them select other symbols makes the logic more complex and needs
to duplicate some things. So let the machines select the corresponding
symbols (indirectly via SOC_XYZ).

LAKML-Reference: 1302464943-20721-2-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:29 +02:00
Uwe Kleine-König
13cf8df97d ARM: remove support for mxc91231
Since support for mxc91231 was introduced 2009 it only saw patches that
were part of (mxc or arm) global cleanups. The only supported machine
only had 4 devices (2x UART, sdhc, watchdog).

Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
LAKML-Reference: 1302211482-17926-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:28 +02:00
Sascha Hauer
f142b61968 video i.MX: remove mx1 compile time dependencies
remove usage of CONFIG_ARCH_MX1. It's mostly unused anyway, replace
it with cpu_is_mx1() where necessary. Also, depend on
IMX_HAVE_PLATFORM_IMX_FB instead of the architectures directly.

LAKML-Reference: 20110303141244.GQ29521@pengutronix.de
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:26 +02:00
Uwe Kleine-König
18879e13b1 ARM: imx51: use platform id 2 for imx51-cspi
The platform id is used to determine the spi bus number, so it should
better be different to the ids used for imx51-ecspi.  Otherwise it's not
possible to use both devices "imx51-cspi.0" and "imx51-ecspi.0".

Alternative approaches are to use dynamic bus numbering as offered by
the spi framework or let the machine code set the bus number.  The
downside of both possibilities is that the bus number isn't fixed for
the same busses on different machines using i.MX51.

LAKML-Reference: 1302100716-21034-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:24 +02:00
Uwe Kleine-König
afa77ef30e ARM: mx3: dynamically allocate "ipu-core" devices
... together with the related devices "mx3_camera" and "mx3_sdc_fb".

"mx3_camera" doesn't fit the scheme of the other devices that just are
allocated and registered in a single function because it needs additional
care to get some dmaable memory. So currently imx31_alloc_mx3_camera
duplicates most of imx_add_platform_device_dmamask, but I'm not sure it's
worth to split the latter to be able to reuse more code.

This gets rid of mach-mx3/devices.[ch] and so several files need to be
adapted not to #include devices.h anymore.

LAKML-Reference: 1299271882-2130-5-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:20 +02:00
Uwe Kleine-König
83422671c3 ARM: mx3: dynamically allocate "mxc_rtc" devices
LAKML-Reference: 1299271882-2130-2-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:16 +02:00
Baruch Siach
fdaf0ef72a ARM: imx/mx25: add NAND chip select pins to iomux
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
LAKML-Reference: cae1d71db47204ee2654eca7391cb656ed53566b.1300095569.git.baruch@tkos.co.il
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:13 +02:00
Wolfram Sang
986e5f08de ARM: mx27: fix gpt4/5 base address
Reported-by: Igor Trevisan <igt1972@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
LAKML-Reference: 1299786904-5494-1-git-send-email-w.sang@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:09 +02:00
Fabio Estevam
2d95378b04 ARM: mx53: Print silicon revision on boot
Having the silicon revision to appear on the boot log is a useful information.

MX31, MX35 and MX51 already show the silicon revision on boot.

Add support for displaying such information for MX53 as well.

Tested on a mx53loco board, where it shows:

CPU identified as i.MX53, silicon rev 2.0

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
LAKML-Reference: 1301068367-18937-1-git-send-email-fabio.estevam@freescale.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-19 13:11:00 +02:00
Russell King
7b76415375 Merge branch 'zImage_fixes' of git://git.linaro.org/people/nico/linux into devel-stable 2011-05-07 08:34:02 +01:00
Nicolas Pitre
8ea0de4b88 ARM: zImage: remove the static qualifier from global data variables
To be able to relocate the .bss section at run time independently from
the rest of the code, we must make sure that no GOTOFF relocations are
used with .bss symbols.  This usually means that no global variables can
be marked static unless they're also const.

Let's remove the static qualifier from current offenders, or turn them
into const variables when possible.  Next commit will ensure the build
fails if one of those is reintroduced due to otherwise enforced coding
standards for the kernel.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com>
2011-05-07 00:08:02 -04:00
Russell King
e04d6c53a5 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes 2011-04-27 08:43:01 +01:00
Joe Perches
85ee7a1d39 treewide: cleanup continuations and remove logging message whitespace
Using C line continuation inside format strings is error prone.
Clean up the unintended whitespace introduced by misuse of \.
Neaten correctly used line continations as well for consistency.

drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well,
but arcmsr needs a lot more work and the driver should likely be
moved to staging instead.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-26 10:24:37 +02:00
Thomas Gleixner
b5eee2fdef ARM: mxc: Add missing lockdep annotation
The irq_set_wake() function of the gpio irq_chip calls
enable/disable_irq_wake() on the demultiplex interrupt. That leads to
a lockdep warning "INFO: possible recursive locking detected" because
irq_set_type() is called under irq_desc->lock and the *_irq_wake()
calls take irq_desc->lock of the demux interrupt.

Tell lockdep that the gpio irqs are in a different lock class.

Documentation/SubmitChecklist:
 15: All codepaths have been exercised with all lockdep features enabled.

That's a non-optional requirement, AFAICT.

Reported-and-tested-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LAKML-Reference: alpine.LFD.2.00.1104041416290.19945@localhost6.localdomain6
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-04-12 09:48:17 +02:00
Dave Martin
0575b4b83e ARM: mxc: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL
Directives such as .long and .word do not magically cause the
assembler location counter to become aligned in gas.  As a
result, using these directives in code sections can result in
misaligned data words when building a Thumb-2 kernel
(CONFIG_THUMB2_KERNEL).

This is a Bad Thing, since the ABI permits the compiler to
assume that fundamental types of word size or above are word-
aligned when accessing them from C.  If the data is not really
word-aligned, this can cause impaired performance and stray
alignment faults in some circumstances.

In general, the following rules should be applied when using
data word declaration directives inside code sections:

    * .quad and .double:
         .align 3

    * .long, .word, .single, .float:
         .align (or .align 2)

    * .short:
        No explicit alignment required, since Thumb-2
        instructions are always 2 or 4 bytes in size.
        immediately after an instruction.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
LAKML-Reference: 1289913217-8672-1-git-send-email-dave.martin@linaro.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-04-12 09:48:10 +02:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds
85eb1513c1 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (65 commits)
  ARM: 6826/1: Merge v6 and v7 DEBUG_LL DCC support
  ARM: 6838/1: etm: fix section mismatch warning
  ARM: 6837/1: remove unused pci_fixup_prpmc1100
  ARM: 6836/1: kprobes/fix emulation of LDR/STR instruction when Rn == PC
  Fix the broken build for Marvell Dove platform.
  ARM: 6835/1: perf: ensure overflows aren't missed due to IRQ latency
  ARM: 6834/1: perf: reset counters on all CPUs during initialisation
  ARM: 6833/1: perf: add required isbs() to ARMv7 backend
  ARM: 6825/1: kernel/sleep.S: fix Thumb2 compilation issues
  ARM: 6807/1: realview: Fix secondary GIC initialisation for EB with MPCore tile
  arm: mach-mx3: pcm043: add write-protect and card-detect for SD1
  eukrea_mbimxsd51: add SD Card detect
  eukrea_mbimxsd25-baseboard: add SD card detect
  mx3/eukrea_mbimxsd-baseboard: add SD card detect support
  mx3/eukrea_mbimxsd-baseboard: fix gpio request
  ARM: mxs/mx28evk: add mmc device
  ARM: mxs/mx23evk: add mmc device
  ARM: mxs: dynamically allocate mmc device
  ARM: mx51_efika: update platform data for new mfd changes
  mx2/iomux: Set direction for CSPI2 pins
  ...
2011-03-30 07:50:45 -07:00
Thomas Gleixner
f38c02f3b3 arm: Fold irq_set_chip/irq_set_handler
Use irq_set_chip_and_handler() instead. Converted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:47:58 +02:00
Thomas Gleixner
6845664a6a arm: Cleanup the irq namespace
Convert to the new function names. Automated with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:47:57 +02:00
Thomas Gleixner
eb2d7188f9 arm: mxc: Use generic_handle_irq()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:47:55 +02:00
Julien Boibessot
58d5ad5e3c mx2/iomux: Set direction for CSPI2 pins
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-25 08:21:34 +01:00
Dinh Nguyen
0adf882b68 ARM: mx51: Implement code to allow mx51 to enter WFI
Implement code for MX51 that allows the SoC to enter WFI when
arch_idle is called.

This patch is also necessary for correctly suspending the system.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23 15:08:15 +01:00
Dinh Nguyen
16f246e69b ARM: mx50: Add support to get the silicon revision
For MX50, the HW_ADADIG_DIGPROG register in the ANATOP module will
have the correct silicon revision:

Major       Minor   Description
0x50        0x0     TO1.0
0x50        0x1     TO1.1

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23 15:08:15 +01:00
Shawn Guo
5d18724588 ARM: mxc: fix buggy '.end' of IORESOURCE_MEM in device codes
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23 15:08:14 +01:00
Julien Boibessot
0ff2593bf6 MX51: Add AUDMUX ports definitions
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23 15:08:13 +01:00
Jan Weitzel
c124befc0d ARM: mxc: Add sched_clock to mxc platform
Add sched_clock using cyc_to_sched_clock and update_sched_clock
with HAVE_SCHED_CLOCK
tested on iMX27 and iMX35

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23 15:08:13 +01:00
Jan Weitzel
93b20e4fdb ARM: mxc: Add dummy_get_cycles to avoid access before init is done
this is needed to use get_cycles with sched_clock. Accessing timer
without enabled clk will result in crash

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23 15:08:12 +01:00
Fabio Estevam
76422dbf3c ARM: mx51: Print silicon revision on boot
Having the silicon revision to appear on the boot log is a useful information.

MX31 and MX35 already show the silicon revision on boot.

Add support for displaying such information for MX51 as well.

Tested on a MX51EVK, where it shows:

CPU identified as i.MX51, silicon rev 3.0

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23 15:07:47 +01:00
Linus Torvalds
a8c91da549 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
  mmc: dw_mmc: support mmc power control with regulator
  mmc: dw_mmc: fix suspend/resume operation
  mmc: dw_mmc: add quirks for unreliable card detect, and capabilities
  mmc: tmio: fix address in kunmap_atomic() calls
  mmc: core: reset card voltage after power off
  mmc: core: export function mmc_do_release_host()
  mmc: sdio: remember new card RCA when redetecting card
  mmc: dw_mmc: Remove set-but-unused variable.
  mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35
  mmc: sdhci-esdhc: broken card detection is not a default quirk
  mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35
  mmc: msm_sdcc: remove needless cache flush after dma_unmap_sg()
  mmc: sh_mmcif: support aggressive clock gating
  mmc: check if mmc cards < 2GB do sector addressing
  mmc: core: comment on why sdio_reset is done at init time
  mmc: dw_mmc: support DDR mode
  mmc: via-sdmmc: Remove set-but-unused variable.
  mmc: cb710: Return err value in cb710_wait_while_busy()
  mmc: sdhci-pci: Remove set-but-unused variable.
  mmc: mxs-mmc: add mmc host driver for i.MX23/28
  ...
2011-03-18 22:32:40 -07:00
Linus Torvalds
411f5c7a50 Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig
2011-03-17 19:08:06 -07:00
Wolfram Sang
7e29c30603 mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Marc Reilly <marc@cpdesign.com.au>
Tested-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17 15:35:04 -04:00
Wolfram Sang
0c6d49ce53 mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Marc Reilly <marc@cpdesign.com.au>
Tested-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17 15:35:00 -04:00
Russell King
05e3475451 Merge branch 'p2v' into devel
Conflicts:
	arch/arm/kernel/module.c
	arch/arm/mach-s5pv210/sleep.S
2011-03-16 23:35:27 +00:00
Richard Zhu
bb0a80e394 mx51 enchance the sd/mmc HW timing compatibility on mx51 boards.
Some cards have the CRC errors in read on mx51 BBG board.
Configure the eSDHC pad configurations to level up the
compatibility to fix this issue.

Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com>
Tested-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-10 14:22:18 +01:00
Uwe Kleine-König
65e7a3222f ARM: mxc91231: select MXC_AVIC
This fixes:

	arch/arm/kernel/built-in.o: In function `__irq_svc':
	io.c:(.text+0x2e0): undefined reference to `avic_base'
	arch/arm/kernel/built-in.o: In function `__irq_usr':
	io.c:(.text+0x4c8): undefined reference to `avic_base'
	arch/arm/mach-mxc91231/built-in.o: In function `mxc91231_init_irq':
	magx-zn5.c:(.init.text+0x18): undefined reference to `mxc_init_irq'

and was broken by

	c7259df (ARM i.MX irq: Compile avic irq code only on SoCs that need it)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07 19:29:44 +01:00
Richard Zhao
c23eb89ef7 ARM: imx3x: clean up ARCH_MX3X
Move to SOC_SOC_IMX3X.
Leave ARCH_MX31/35 definitions there, in case some place prevent multi-soc
single image.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07 19:29:43 +01:00
Richard Zhao
7685167128 ARM: imx5x: clean up ARCH_MX5X
Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc
using ARCH_MX5X.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07 19:29:42 +01:00
Sascha Hauer
48f6b09996 ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceivers
The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops,
both are only present if CONFIG_USB_ULPI is set. To remove the need of
ifdefs in the board code introduce a imx_otg_ulpi_create functions
which expands to a static inline function if compiled without ulpi.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07 19:29:41 +01:00
Sascha Hauer
ff255feba1 ARM i.MX: iomux v1 initialization away from initcall
This saves us from soc level dispatching in generic files

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07 19:29:38 +01:00