Commit graph

16 commits

Author SHA1 Message Date
Thomas Gleixner
8cab02dc3c x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown
This basically reverts commit 1a0c009ac (x86: unregister PIT
clocksource when PIT is disabled) because the problem which was tried
to address with that patch has been solved by commit 3f68535ada
(clocksource: sanity check sysfs clocksource changes).

The problem addressed by the original patch is that PIT could be
selected as clocksource after the system switched the PIT off or set
the PIT into one shot mode which would result in complete timekeeping
wreckage.

Now with the sysfs sanity check in place PIT cannot be selected again
when the system is in oneshot mode. The system will not switch to one
shot mode as long as PIT is installed because PIT is not suitable for
one shot.

The shutdown case which happens when the lapic timer is installed is
covered by the fact that init_pit_clocksource() is called after the
lapic timer take over and then does not install the PIT clocksource
at all.

We should have done the sanity checks back then, but ...

This also solves the locking problem which was reported vs. the
clocksource rework.

LKML-Reference: <new-submission>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-21 21:13:37 +02:00
Arnd Bergmann
08604bd993 time: move PIT_TICK_RATE to linux/timex.h
PIT_TICK_RATE is currently defined in four architectures, but in three
different places.  While linux/timex.h is not the perfect place for it, it
is still a reasonable replacement for those drivers that traditionally use
asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency.

Note that for Alpha, the actual value changed from 1193182UL to 1193180UL.
 This is unlikely to make a difference, and probably can only improve
accuracy.  There was a discussion on the correct value of CLOCK_TICK_RATE
a few years ago, after which every existing instance was getting changed
to 1193182.  According to the specification, it should be
1193181.818181...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Len Brown <lenb@kernel.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:27 -07:00
Magnus Damm
8e19608e8b clocksource: pass clocksource to read() callback
Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:47 -07:00
Jaswinder Singh Rajput
c8344bc218 x86: i8253 cleanup
Impact: cleanup

 - fix various style problems
  - fix header file issues

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-21 16:56:10 +05:30
Rusty Russell
320ab2b0b1 cpumask: convert struct clock_event_device to cpumask pointers.
Impact: change calling convention of existing clock_event APIs

struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.

Another single-patch change.  For safety, we BUG_ON() in
clockevents_register_device() if it's not set.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2008-12-13 21:20:26 +10:30
Akinobu Mita
877084fb1c x86: cleanup div_sc() usage
Remove the magic number in the third argment of div_sc().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 17:35:47 +02:00
Akinobu Mita
d454157b11 x86: cleanup clocksource_hz2mult usage
Remove the magic number in the second argument of clocksource_hz2mult()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 17:35:47 +02:00
Harvey Harrison
c2a9cc7e86 x86: pit_clockevent can be static
arch/x86/kernel/i8253.c:98:27: warning: symbol 'pit_clockevent' was not declared. Should it be static?

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-13 16:20:35 +01:00
Alan Cox
466eed22d1 x86: isolate PIC/PIT in/out calls
Rather than remove and/or mangle inb_p/outb_p we want to remove the use
of them from inappropriate places. For the PIC/PIT this may eventually
depend on 32/64bitism or similar so start by adding inb/outb_pit and
inb/outb_pic so that we can make them use any scheme we settle on without
disturbing the existing, correct (for ISA), port 0x80 usage. (eg we can
make inb_pit use udelay without messing up inb_p).

Floppy already does this for the fdc. That really only leaves the CMOS as
a core logic item to tackle, and bits of parallel port handling in the
chipset layers.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:14 +01:00
Ralf Baechle
5f627f8e12 mips, x86: optimize the i8259 code a bit
The timer code always calls the clock_event_device set_net_event and
set_mode methods with interrupts disabled, so no need to use
spin_lock_irqsave / spin_unlock_irqrestore for those.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by:Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:47 +01:00
Thomas Gleixner
1a0c009ac5 x86: unregister PIT clocksource when PIT is disabled
The following scenario might leave PIT as a disfunctional clock source:

    PIT is registered as clocksource
    PM_TIMER is registered as clocksource and enables highres/dyntick mode
    PIT is switched to oneshot mode
    -> now the readout of PIT is bogus, but the user might select PIT
    via the sysfs override, which would break the box as the time
    readout is unusable.

Unregister the PIT clocksource when the PIT clock event device is switched
into shutdown / oneshot mode.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:30:03 +01:00
Thomas Gleixner
4713e22ce8 clocksource: add unregister function to disable unusable clocksources
On x86 the PIT might become an unusable clocksource. Add an unregister
function to provide a possibilty to remove the PIT from the list of
available clock sources.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:30:02 +01:00
Thomas Gleixner
316da3b3fc x86: restrict PIT clocksource usage
PIT clocksource is registered unconditionally even when HPET is enabled
or when PIT is replaced by the local APIC timer. In both cases PIT can
not be used as it is stopped and the readout would be stale.

Prevent registering PIT in those cases.

patch depends on:

  x86: offer is_hpet_enabled() on !CONFIG_HPET_TIMER too

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:30:02 +01:00
Simon Arlott
27b46d7661 spelling fixes: arch/i386/
Spelling fixes in arch/i386/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:13:56 +02:00
Dave Jones
835c34a168 Delete filenames in comments.
Since the x86 merge, lots of files that referenced their own filenames
are no longer correct.  Rather than keep them up to date, just delete
them, as they add no real value.

Additionally:
- fix up comment formatting in scx200_32.c
- Remove a credit from myself in setup_64.c from a time when we had no SCM
- remove longwinded history from tsc_32.c which can be figured out from
  git.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 10:01:23 -07:00
Thomas Gleixner
9f75e9b74a x86_64: remove now unused code
Remove the unused code after the switch to clock events.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12 23:04:23 +02:00
Renamed from arch/x86/kernel/i8253_32.c (Browse further)