Commit graph

1792 commits

Author SHA1 Message Date
Tejun Heo
5594639aab ahci: add workaround for on-board 5723s on some gigabyte boards
Some gigabytes have on-board SIMG5723s connected to JMB ahcis.  These
are used to implement hardware raid.  Unfortunately some firmware
revisions on these 5723s don't bring the link down when all the
downstream ports are unoccupied while not responding to reset protocol
which makes libata think that there's device attached to the port but
is not responding and retry.  This results in painfully wrong boot
detection time for these ports when they're empty.

This patch quirks those boards such that ahci gives up after the
initial timeout.  Combined with parallel probing, this gives quick
enough probing and also is safe because SIMG5723 will respond to the
first try if any of the downstream ports is occupied.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Marc Bowes <marcbowes@gmail.com>
Reported-by: Nicolas Mailhot <Nicolas.Mailhot@LaPoste.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-08-12 06:21:32 -04:00
Shane Huang
b6931c1fba ahci: Soften up the dmesg on SB600 PMP softreset failure recovery
Too strong words led to spurious bug reports: Novell bugzilla #527748,
RedHat bugzilla #468800. This patch is used to soften up the dmesg on
SB600 PMP softreset failure recovery, so as to remove the scariness and
concern from community.

Reported-by: pgnet Dev <pgnet.dev@gmail.com>
Signed-off-by: Shane Huang <shane.huang@amd.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-08-12 06:21:24 -04:00
Tony Vroon
51c8949950 sata_nv: MSI support, disabled by default
At least the nVidia MCP55 controller quite happily supports MSI.
This adds an option to use it. It is disabled by default.
As per feedback by Robert Hancock, it will honour the user
request as the kernel will not enable MSI where the controller
or the specific system configuration do not support it.

Signed-off-by: Tony Vroon <tony@linx.net>
Cc: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-08-12 06:20:29 -04:00
Tejun Heo
7831387bda libata: OCZ Vertex can't do HPA
OCZ Vertex SSD can't do HPA and not in a usual way.  It reports HPA,
allows unlocking but then fails all IOs which fall in the unlocked
area.  Quirk it so that HPA unlocking is not used for the device.

Reported by Daniel Perup in bnc#522414.

 https://bugzilla.novell.com/show_bug.cgi?id=522414

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Perup <probe@spray.se>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-08-12 06:17:33 -04:00
Bartlomiej Zolnierkiewicz
1fd4bbec8c pata_atiixp: fix second channel support
PIO and MWDMA timings are never programmed for the second channel
because timing registers are treated as 16-bit long ones.

The bug is an attixp -> pata_atiixp regression and goes back to:

	commit 669a5db411
	Author: Jeff Garzik <jeff@garzik.org>
	Date:   Tue Aug 29 18:12:40 2006 -0400

	    [libata] Add a bunch of PATA drivers.

Cc: Krystian Juskowiak <jusko@tlen.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bbpetkov@yahoo.de>
Cc: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-08-12 06:17:29 -04:00
Tejun Heo
df9eba8c9f pata_at91: fix resource release
Julias Lawall discovered that pata_at91 wasn't freeing a memory region
allocated with kzalloc() on init failure paths.  Upon review,
pata_at91 also seems to be doing unnecessary explicit resource
releases for managed resources too.  Convert memory allocation to
managed one and drop unnecessary explicit resource releases.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Julia Lawall <julia@diku.dk>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-08-12 06:16:47 -04:00
Tejun Heo
5920dadfb4 libata: accept late unlocking of HPA
On certain configurations, HPA isn't or can't be unlocked during
probing but it somehow ends up unlocked afterwards.  In the following
thread, the problem can be reliably reproduced after resuming from
STR.  The BIOS turns on HPA during boot but forgets to do it during
resume.

  http://thread.gmane.org/gmane.linux.kernel/858310

This patch updates libata revalidation such that it considers native
n_sectors.  If the device size has increased to match native
n_sectors, it's assumed that HPA has been unlocked involuntarily and
the device is recognized as the same one.  This should be fairly safe
while nicely working around the problem.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Christof Warlich <christof@warlich.name>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-28 21:07:09 -04:00
Sergey Matyukevich
7d084d96fd libata: Updates and fixes for pata_at91 driver
Please consider the following updates and fixes for pata_at91 driver.

* Removed extra headers
	Here we need only static memory controller properties, which are
	contained in generic header at91sam9_smc.h.
	No need to include any specific headers for at91sam9260 SoC.

* No harsh BUG_ON for get_clk in set_smc_timing function
        get_clk is now performed in driver probing function,
	        probing fails if master clock is not available

* Fixed uint/ulong mess in calc_mck_cycles function

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-28 21:07:05 -04:00
Steve Conklin
760cdb7760 ata_piix: Add new short cable ID
OriginalAuthor: Tony Espy <espy@canonical.com>
Signed-off-by: Steve Conklin <sconklin@canonical.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-28 21:06:53 -04:00
Steve Conklin
6034734d33 ata_piix: Add new laptop short cable IDs
OriginalAuthor: Michael Frey <michael.frey@canonical.com>
Signed-off-by: Steve Conklin <sconklin@canonical.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-28 21:06:43 -04:00
David Milburn
c1f57d9b98 ahci: add device IDs for Ibex Peak ahci controllers
Add device IDS for Ibex Peak SATA AHCI Controllers

Signed-off-by: Jaroslav Kysela <jkysela@redhat.com>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-28 21:06:26 -04:00
Bartlomiej Zolnierkiewicz
c9abde12d6 libata: remove superfluous NULL pointer checks
host->ports[] always contain pointers to valid port structures since
a "dummy port" structure is used in case if there is no physical port.

This patch takes care of two entries from Dan's list:

drivers/ata/sata_sil.c +535 sil_interrupt(13) warning: variable derefenced before check 'ap'
drivers/ata/sata_mv.c +2517 mv_unexpected_intr(6) warning: variable derefenced before check 'ap'

and of another needless NULL pointer check in pata_octeon_cf.c.

Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-28 21:06:13 -04:00
Bartlomiej Zolnierkiewicz
705d201414 libata: add missing NULL pointer check to ata_eh_reset()
drivers/ata/libata-eh.c +2403 ata_eh_reset(80) warning: variable derefenced before check 'slave'

Please note that this is _not_ a real bug at the moment since ata_eh_context
structure is embedded into ata_list structure and the code alwas checks for
'slave' before accessing 'sehc'.

Anyway lets add missing check and always have a valid 'sehc' pointer (which
makes code easier to understand and prevents introducing some possible bugs
in the future).

Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-28 21:05:41 -04:00
Wolfram Sang
044dcc824a pata_pcmcia: add CNF-CDROM-ID
Fixes this report:
http://article.gmane.org/gmane.linux.kernel.pcmcia.devel/2228/

Reported-by: John McGrath <john@john-mcgrath.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-28 21:05:18 -04:00
Mark Goodwin
b2dde6afe5 ahci: add device ID for 82801JI sata controller
Add device ID for Intel 82801JI SATA AHCI controller.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-14 22:42:56 -04:00
Julia Lawall
1e1f421a81 drivers/ata: Move a dereference below a NULL test
If the NULL test is necessary, then the dereference should be moved below
the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-14 22:42:51 -04:00
Tejun Heo
d0cb43b35d libata: implement and use HORKAGE_NOSETXFER, take#2
PIONEER DVD-RW DVRTD08 times out SETXFER if no media is present.  The
device is SATA and simply skipping SETXFER works around the problem.
Implement ATA_HORKAGE_NOSETXFER and apply it to the device.

Reported by Moritz Rigler in the following thread.

  http://thread.gmane.org/gmane.linux.ide/36790

and by Lars in bko#9540.

Updated to whine and ignore NOSETXFER if PATA component is detected as
suggested by Alan Cox.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Moritz Rigler <linux-ide@momail.e4ward.com>
Reported-by: Lars <lars21ce@gmx.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-14 22:41:46 -04:00
Tejun Heo
fe2c4d018f libata: fix follow-up SRST failure path
ata_eh_reset() was missing error return handling after follow-up SRST
allowing EH to continue the normal probing path after reset failure.
This was discovered while testing new WD 2TB drives which take longer
than 10 secs to spin up and cause the first follow-up SRST to time
out.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-14 22:41:28 -04:00
Tejun Heo
0d9e6659a1 libata: don't set IORDY for reset
Before issuing reset, libata configures xfermode to PIO0 which makes
some drivers turn on IORDY which may cause the controller to lock up
if the port is not occupied.  IORDY isn't necessary at this point
anyway.  Make ata_pio_need_iordy() return zero if it's being called
for reset.

This fixes bko#11703.  Reported and tracked down by Daniel Gnoutcheff
and Constantine Gavrilov.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Gnoutcheff <gnoutchd@union.edu>
Cc: Constantine Gavrilov <constantine.gavrilov@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-23 01:54:30 -04:00
Dave Liu
dc77ad4c87 sata_fsl: Add power mgmt support
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-23 01:54:27 -04:00
Sergey Matyukevich
918d7b7c33 [libata] PATA driver for CF interface on AT91SAM9260 SoC
This patch provides PATA driver for CompactFlash interface in True IDE
mode on AT91SAM9260 SoC.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-23 01:54:24 -04:00
Evgeni Golov
ad5d8eac91 [libata] beautify module parameters
1. add defaults to description where possible
2. add value definition (off=0, on=1) where missing

v2: reformatted as per request by Jeff Garzik <jgarzik@pobox.com>
    "Enable foo (0=off, 1=on [default])"

Signed-off-by: Evgeni Golov <sargentd@die-welt.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-23 01:53:58 -04:00
Wolfgang Denk
87c441e54d powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency,
while MPC52xx used mpc52xx_find_ipb_freq().  Despite the different
clock names (IPS vs. IPB) the code was identical.

Use common code for both processor families.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-17 00:30:22 -06:00
Linus Torvalds
489f7ab6c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits)
  trivial: remove the trivial patch monkey's name from SubmittingPatches
  trivial: Fix a typo in comment of addrconf_dad_start()
  trivial: usb: fix missing space typo in doc
  trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug
  trivial: Remove the hyphen from git commands
  trivial: fix ETIMEOUT -> ETIMEDOUT typos
  trivial: Kconfig: .ko is normally not included in module names
  trivial: SubmittingPatches: fix typo
  trivial: Documentation/dell_rbu.txt: fix typos
  trivial: Fix Pavel's address in MAINTAINERS
  trivial: ftrace:fix description of trace directory
  trivial: unnecessary (void*) cast removal in sound/oss/msnd.c
  trivial: input/misc: Fix typo in Kconfig
  trivial: fix grammo in bus_for_each_dev() kerneldoc
  trivial: rbtree.txt: fix rb_entry() parameters in sample code
  trivial: spelling fix in ppc code comments
  trivial: fix typo in bio_alloc kernel doc
  trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt
  trivial: Miscellaneous documentation typo fixes
  trivial: fix typo milisecond/millisecond for documentation and source comments.
  ...
2009-06-14 13:46:25 -07:00
Linus Torvalds
2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Martin Olsson
98a1708de1 trivial: fix typos s/paramter/parameter/ and s/excute/execute/ in documentation and source comments.
Signed-off-by: Martin Olsson <martin@minimum.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:46 +02:00
Linus Torvalds
6adc74b7d0 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] ata_piix: Enable parallel scan
  sata_nv: use hardreset only for post-boot probing
  [libata] ahci: Restore SB600 SATA controller 64 bit DMA
  ata_piix: Remove stale comment
  ata_piix: Turn on hotplugging support for older chips
  ahci: misc cleanups for EM stuff
  [libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2
  sata_sil: enable 32-bit PIO
  sata_sx4: speed up ECC initialization
  libata-sff: avoid byte swapping in ata_sff_data_xfer()
  [libata] ahci: use less error-prone array initializers
2009-06-11 11:23:17 -07:00
Linus Torvalds
c9059598ea Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
	block/blk-sysfs.c
	drivers/ide/ide-atapi.c
	drivers/ide/ide-cd.c
	drivers/ide/ide-floppy.c
	drivers/ide/ide-tape.c
	include/trace/events/block.h
	kernel/trace/blktrace.c
2009-06-11 11:10:35 -07:00
Arjan van de Ven
517d3cc15b [libata] ata_piix: Enable parallel scan
This patch turns on parallel scanning for the ata_piix driver.
This driver is used on most netbooks (no AHCI for cheap storage it seems).
The scan is the dominating time factor in the kernel boot for these
devices; with this flag it gets cut in half for the device I used
for testing (eeepc).
Alan took a look at the driver source and concluded that it ought to be safe
to do for this driver.  Alan has also checked with the hardware team.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 11:05:34 -04:00
Tejun Heo
7f4774b38e sata_nv: use hardreset only for post-boot probing
When I thought it was finally defeated, it came back with vengeance.
The failure cases are ever more convoluted.  Now there is a single
combination which fails boot probing - MCP5x + Intel SSD and there are
two hotplug failure reports on different flavors where softreset fails
to bring up the device.

Through the many bug reports after the switch to hardreset, the
following patterns emerged.

- Softreset during boot always works.

- Hardreset during boot sometimes fails to bring up the link on
  certain comibnations and device signature acquisition is unreliable.

- Hardreset is often necessary after hotplug.

It looks like the old behavior of preferring softreset was somehow
pretty close to the working reset protocol although it could have lost
a device during phy error handling by issuing hardreset.

This patch implements nv_hardreset() which kicks in only for post-boot
(!LOADING) device probing resets.  This should be able to work around
all known problem cases.  This isn't perfect but given the various
hardreset quirks on these controllers, I think this is as good as it
can get.

Tested on mcp5x (swncq), nf3 and ck804 for all both boot, warm and
hot probing cases.

Kudos to all the bug reporters and their painful hours with these damn
controllers.  ;-)

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Robert Hancock <hancockr@shaw.ca>
Reported-by: David Lang <david@lang.hm>
Reported-by: Samo Vodopivec <lament.email.si@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 11:05:26 -04:00
Shane Huang
58a09b38cf [libata] ahci: Restore SB600 SATA controller 64 bit DMA
Community reported one SB600 SATA issue(BZ #9412), which led to 64 bit
DMA disablement for all SB600 revisions by driver maintainers with
commits c7a42156d9 and
4cde32fc4b.

But the root cause is ASUS M2A-VM system BIOS bug in old revisions
like 0901, while forcing into 32bit DMA happens to work as workaround.
Now it's time to withdraw 4cde32fc4b
so as to restore the SB600 SATA 64bit DMA capability.
This patch is also adding the workaround for M2A-VM old BIOS revisions,
but users are suggested to upgrade their system BIOS to the latest one
if they meet this issue.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 11:05:00 -04:00
Alan Cox
7654db1a92 ata_piix: Remove stale comment
Combined mode pci quirk hacks went away - so the table to keep in sync
no longer exists.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 07:50:18 -04:00
Alan Cox
347979a034 ata_piix: Turn on hotplugging support for older chips
We can't do this for the later ones as they have all sorts of magic boot
time stuff that needs reviewing and the like. However we can do it for the
older ones and it turns out we need to as some IBM docking stations have a
second PIIX series device in them and without this change you can't use it
very well

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 07:50:17 -04:00
Tejun Heo
d50ce07d6f ahci: misc cleanups for EM stuff
Make the following EM related cleanups.

* Use msleep(1) instead of udelay(100) and reduce retry count to 5.

* s/MAX_SLOTS/EM_MAX_SLOTS/, s/MAX_RETRY/EM_MAX_RETRY/

* Make EM constants enums as suggested by Jeff.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 07:50:17 -04:00
Jens Axboe
437681800b [libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2
We very rarely (if ever) complete more than one command in the
sactive mask at the time, even for extremely high IO rates. So
looping over the entire range of possible tags is pointless,
instead use __ffs() to just find the completed tags directly.

Updated to clear the tag from the done_mask instead of shifting
done_mask down as suggested by From: Tejun Heo <htejun@gmail.com>
Verified with a user space tester to produce the same results.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 07:50:17 -04:00
Robert Hancock
31f80112cc sata_sil: enable 32-bit PIO
32-bit PIO seems to work fine on sata_sil hardware (tested on SiI3114) and is
listed as OK in the Silicon Image datasheets. Enable it.

Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 07:50:17 -04:00
Alexander Beregalov
f35b5e7c06 sata_sx4: speed up ECC initialization
ECC initialization takes too long. It writes zeroes by portions
of 4 byte, it takes more than 6 minutes on my machine to initialize
512Mb ECC DIMM module. Change portion to 128Kb - it significantly
reduces initialization time.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 07:50:17 -04:00
Sergei Shtylyov
2102d74973 libata-sff: avoid byte swapping in ata_sff_data_xfer()
Handling of the trailing byte in ata_sff_data_xfer() is suboptimal bacause:

- it always initializes the padding buffer to 0 which is not really needed in
  both the read and write cases;

- it has to use memcpy() to transfer a single byte from/to the padding buffer;

- it uses io{read|write}16() accessors which swap bytes on the big endian CPUs
  and so have to additionally convert the data from/to the little endian format
  instead of using io{read|write}16_rep() accessors which are not supposed to
  change the byte ordering.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 07:50:16 -04:00
Jeff Garzik
4da646b7b5 [libata] ahci: use less error-prone array initializers
Also, remove unneeded prototype.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 07:50:16 -04:00
Russell King
7698fdedcf Merge branch 'for-rmk' of git://git.marvell.com/orion into devel 2009-06-08 19:27:13 +01:00
Alan Cox
5284c6b99e pata_netcell: Fix typo
The previous patch submission had a I typo I didn't catch but Bartlomiej
noted. Guess this proves the point about any patch being risky late in an rc

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-08 09:12:28 -07:00
Alan Cox
a3cb900cc4 [libata] pata_ali: Use IGN_SIMPLEX
Some ALi devices report simplex if they have been disabled and re-enabled, and
restoring the byte does not work. Ignore it - the needed supporting logic is
already present for the SATA ULi ports.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05 17:10:54 -04:00
Ville Syrjala
65e3164311 ata_piix: Add HP Compaq nc6000 to the broken poweroff list
HP Compaq nc6000 suffers from the double disk spindown issue.
Add it to the broken poweroff DMI list.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05 14:41:13 -04:00
Tejun Heo
9b10ae86d1 ahci: add warning messages for hp laptops with broken suspend
Harddisks on HP dv[4-6] and HDX18 fail to come online after resume on
earlier BIOSen.  Fortunately, HP recently released BIOS updates for
all machines to fix the issue.  Detect old BIOSen, warn the user to
update BIOS on boot and suspend attempts and fail suspend.

Kudos to all the bug reporters.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kernel.org@epperson.homelinux.net
Cc: emisca@gmail.com
Cc: Gadi Cohen <dragon@wastelands.net>
Cc: Paul Swanson <paul@procursa.com>
Cc: s@ourada.org
Cc: Trevor Davenport <trevor.davenport@gmail.com>
Cc: corruptor1972 <steven_tierney@yahoo.co.uk>
Cc: Victoria Wilson <mail@vwilson.co.uk>
Cc: khiraly <khiraly.list@gmail.com>
Cc: Sean <wollombi@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05 14:41:10 -04:00
Sergei Shtylyov
5f33b3bcd7 pata_efar: fix PIO2 underclocking
Fix the PIO mode 2 using mode 0 timings -- this driver should enable the
fast timing bank starting with PIO2, just like the PIIX/ICH drivers do.
Also, fix/rephrase some comments while at it.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05 14:40:52 -04:00
James Bottomley
45bc955bb1 pata_legacy: wait for async probing
The basic problem here that pata_legacy attaches the host, sees if it found
any devices and detaches it if none were found.  With async probing, it's not
waiting until discovery is finished before deciding it has no devices and
trying the detach leading to this warning:

ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
------------[ cut here ]------------
WARNING: at drivers/ata/libata-core.c:6222 ata_host_detach+0x75/0x90()
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.30-rc7 #1
Call Trace:
 [<c01fbb05>] ? ata_host_detach+0x75/0x90
 [<c01fbb05>] ? ata_host_detach+0x75/0x90
 [<c01139b5>] ? warn_slowpath_common+0x45/0x80
 [<c01139fa>] ? warn_slowpath_null+0xa/0x10
 [<c01fbb05>] ? ata_host_detach+0x75/0x90
 [<c02f40e0>] ? legacy_init+0x44e/0x87f
 [<c02f3c92>] ? legacy_init+0x0/0x87f
 [<c0101021>] ? _stext+0x21/0x140
 [<c01890ff>] ? proc_register+0x2f/0x190
 [<c018938c>] ? create_proc_entry+0x5c/0xc0
 [<c0135ebe>] ? register_irq_proc+0x6e/0x90
 [<c02e6484>] ? kernel_init+0x6e/0xbf
 [<c02e6416>] ? kernel_init+0x0/0xbf
 [<c01031d7>] ? kernel_thread_helper+0x7/0x10
---[ end trace ef1ee36e873ae3a0 ]---

Because it detaches before the probe is complete.

One way to fix it would be to put an async_synchronize_full() before looking
for devices, which this patch does.  A better way might be to separate libata
into its own domain and only wait for that.

Reported-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-05 14:40:46 -04:00
Alan Cox
d3ae33efb8 pata_netcell: LBA48 force identify bits correct
This matches Bartlomiej's patch for ide_pci_generic:
c339dfdd65

In the libata case netcell has its own mini driver. I suspect this fix is
actually only needed for some firmware revs but it does no harm either way.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-02 09:49:46 -07:00
Marek Vašut
5a9d25150c [ARM] 5522/1: PalmLD: IDE support
Support for Palm LifeDrive's internal harddrive.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-31 14:50:40 +01:00
Jens Axboe
e4b636366c Merge branch 'master' into for-2.6.31
Conflicts:
	drivers/block/hd.c
	drivers/block/mg_disk.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 20:25:34 +02:00
Martin K. Petersen
4bca328643 libata: Media rotation rate and form factor heuristics
This patch provides new heuristics for parsing both the form factor and
media rotation rate ATA IDENFITY words.

The reported ATA version must be 7 or greater and the device must return
values defined as valid in the standard.  Only then are the
characteristics reported to SCSI via the VPD B1 page.

This seems like a reasonable compromise to me considering that we have
been shipping several kernel releases that key off the rotation rate bit
without any version checking whatsoever.  With no complaints so far.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-15 14:14:56 -04:00