Commit graph

109 commits

Author SHA1 Message Date
Steven Rostedt (Red Hat)
84b2bc7fa0 ftrace/x86: Add call to ftrace_graph_is_dead() in function graph code
ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing. To do this, the arch code
must call ftrace_graph_is_dead() before it implements function graph.

Link: http://lkml.kernel.org/r/53C54D18.3020602@zytor.com

Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-17 09:45:08 -04:00
Petr Mladek
964f7b6b78 ftrace/x86: Call text_ip_addr() instead of the duplicated code
I just went over this when looking at some Xen-related ftrace initialization
problems. They were related to Xen code that is not upstream but this clean up
would make sense here.

I think that this was already the intention when text_ip_addr() was introduced
in the commit 87fbb2ac60 (ftrace/x86: Use breakpoints for converting
function graph caller). Anyway, better do it now before it shots people into
their leg ;-)

Link: http://lkml.kernel.org/p/1401812601-2359-1-git-send-email-pmladek@suse.cz

Signed-off-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-03 19:44:37 -04:00
Steven Rostedt (Red Hat)
f1b2f2bd58 ftrace: Remove FTRACE_UPDATE_MODIFY_CALL_REGS flag
As the decision to what needs to be done (converting a call to the
ftrace_caller to ftrace_caller_regs or to convert from ftrace_caller_regs
to ftrace_caller) can easily be determined from the rec->flags of
FTRACE_FL_REGS and FTRACE_FL_REGS_EN, there's no need to have the
ftrace_check_record() return either a UPDATE_MODIFY_CALL_REGS or a
UPDATE_MODIFY_CALL. Just he latter is enough. This added flag causes
more complexity than is required. Remove it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-14 11:37:30 -04:00
Steven Rostedt (Red Hat)
7413af1fb7 ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global
Move and rename get_ftrace_addr() and get_ftrace_addr_old() to
ftrace_get_addr_new() and ftrace_get_addr_curr() respectively.

This moves these two helper functions in the generic code out from
the arch specific code, and renames them to have a better generic
name. This will allow other archs to use them as well as makes it
a bit easier to work on getting separate trampolines for different
functions.

ftrace_get_addr_new() returns the trampoline address that the mcount
call address will be converted to.

ftrace_get_addr_curr() returns the trampoline address of what the
mcount call address currently jumps to.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-14 11:37:29 -04:00
Steven Rostedt (Red Hat)
94792ea07c ftrace/x86: Get the current mcount addr for add_breakpoint()
The add_breakpoint() code in the ftrace updating gets the address
of what the call will become, but if the mcount address is changing
from regs to non-regs ftrace_caller or vice versa, it will use what
the record currently is.

This is rather silly as the code should always use what is currently
there regardless of if it's changing the regs function or just converting
to a nop.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-14 11:37:28 -04:00
Petr Mladek
74bb8c4504 ftrace/x86: Fix order of warning messages when ftrace modifies code
The colon at the end of the printk message suggests that it should get printed
before the details printed by ftrace_bug().

When touching the line, let's use the preferred pr_warn() macro as suggested
by checkpatch.pl.

Link: http://lkml.kernel.org/r/1392650573-3390-5-git-send-email-pmladek@suse.cz

Signed-off-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-21 14:00:35 -04:00
Petr Mladek
7f11f5ecf4 ftrace/x86: BUG when ftrace recovery fails
Ftrace modifies function calls using Int3 breakpoints on x86.
The breakpoints are handled only when the patching is in progress.
If something goes wrong, there is a recovery code that removes
the breakpoints. If this fails, the system might get silently
rebooted when a remaining break is not handled or an invalid
instruction is proceed.

We should BUG() when the breakpoint could not be removed. Otherwise,
the system silently crashes when the function finishes the Int3
handler is disabled.

Note that we need to modify remove_breakpoint() to return non-zero
value only when there is an error. The return value was ignored before,
so it does not cause any troubles.

Link: http://lkml.kernel.org/r/1393258342-29978-4-git-send-email-pmladek@suse.cz

Signed-off-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:16 -05:00
Jiri Slaby
3a36cb11ca ftrace: Do not pass data to ftrace_dyn_arch_init
As the data parameter is not really used by any ftrace_dyn_arch_init,
remove that from ftrace_dyn_arch_init. This also removes the addr
local variable from ftrace_init which is now unused.

Note the documentation was imprecise as it did not suggest to set
(*data) to 0.

Link: http://lkml.kernel.org/r/1393268401-24379-4-git-send-email-jslaby@suse.cz

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:14 -05:00
Jiri Slaby
af64a7cb09 ftrace: Pass retval through return in ftrace_dyn_arch_init()
No architecture uses the "data" parameter in ftrace_dyn_arch_init() in any
way, it just sets the value to 0. And this is used as a return value
in the caller -- ftrace_init, which just checks the retval against
zero.

Note there is also "return 0" in every ftrace_dyn_arch_init.  So it is
enough to check the retval and remove all the indirect sets of data on
all archs.

Link: http://lkml.kernel.org/r/1393268401-24379-3-git-send-email-jslaby@suse.cz

Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:13 -05:00
Steven Rostedt (Red Hat)
92550405c4 ftrace/x86: Have ftrace_write() return -EPERM and clean up callers
Having ftrace_write() return -EPERM on failure, as that's what the callers
return, then we can clean up the code a bit. That is, instead of:

  if (ftrace_write(...))
     return -EPERM;
  return 0;

or

  if (ftrace_write(...)) {
     ret = -EPERM;
     goto_out;
  }

We can instead have:

  return ftrace_write(...);

or

  ret = ftrace_write(...);
  if (ret)
    goto out;

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:05:50 -05:00
Petr Mladek
12729f14d8 ftrace/x86: One more missing sync after fixup of function modification failure
If a failure occurs while modifying ftrace function, it bails out and will
remove the tracepoints to be back to what the code originally was.

There is missing the final sync run across the CPUs after the fix up is done
and before the ftrace int3 handler flag is reset.

Here's the description of the problem:

	CPU0				CPU1
	----				----
  remove_breakpoint();
  modifying_ftrace_code = 0;

				[still sees breakpoint]
				<takes trap>
				[sees modifying_ftrace_code as zero]
				[no breakpoint handler]
				[goto failed case]
				[trap exception - kernel breakpoint, no
				 handler]
				BUG()

Link: http://lkml.kernel.org/r/1393258342-29978-2-git-send-email-pmladek@suse.cz

Fixes: 8a4d0a687a "ftrace: Use breakpoint method to update ftrace caller"
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-03 21:23:07 -05:00
Steven Rostedt (Red Hat)
c932c6b7c9 ftrace/x86: Run a sync after fixup on failure
If a failure occurs while enabling a trace, it bails out and will remove
the tracepoints to be back to what the code originally was. But the fix
up had some bugs in it. By injecting a failure in the code, the fix up
ran to completion, but shortly afterward the system rebooted.

There was two bugs here.

The first was that there was no final sync run across the CPUs after the
fix up was done, and before the ftrace int3 handler flag was reset. That
means that other CPUs could still see the breakpoint and trigger on it
long after the flag was cleared, and the int3 handler would think it was
a spurious interrupt. Worse yet, the int3 handler could hit other breakpoints
because the ftrace int3 handler flag would have prevented the int3 handler
from going further.

Here's a description of the issue:

	CPU0				CPU1
	----				----
  remove_breakpoint();
  modifying_ftrace_code = 0;

				[still sees breakpoint]
				<takes trap>
				[sees modifying_ftrace_code as zero]
				[no breakpoint handler]
				[goto failed case]
				[trap exception - kernel breakpoint, no
				 handler]
				BUG()

The second bug was that the removal of the breakpoints required the
"within()" logic updates instead of accessing the ip address directly.
As the kernel text is mapped read-only when CONFIG_DEBUG_RODATA is set, and
the removal of the breakpoint is a modification of the kernel text.
The ftrace_write() includes the "within()" logic, where as, the
probe_kernel_write() does not. This prevented the breakpoint from being
removed at all.

Link: http://lkml.kernel.org/r/1392650573-3390-1-git-send-email-pmladek@suse.cz

Reported-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Petr Mladek <pmladek@suse.cz>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-03 21:23:06 -05:00
Steven Rostedt (Red Hat)
87fbb2ac60 ftrace/x86: Use breakpoints for converting function graph caller
When the conversion was made to remove stop machine and use the breakpoint
logic instead, the modification of the function graph caller is still
done directly as though it was being done under stop machine.

As it is not converted via stop machine anymore, there is a possibility
that the code could be layed across cache lines and if another CPU is
accessing that function graph call when it is being updated, it could
cause a General Protection Fault.

Convert the update of the function graph caller to use the breakpoint
method as well.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: stable@vger.kernel.org # 3.5+
Fixes: 08d636b6d4 "ftrace/x86: Have arch x86_64 use breakpoints instead of stop machine"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-02-11 20:19:44 -05:00
Kevin Hao
ab4ead02ec ftrace/x86: skip over the breakpoint for ftrace caller
In commit 8a4d0a687a "ftrace: Use breakpoint method to update ftrace
caller", we choose to use breakpoint method to update the ftrace
caller. But we also need to skip over the breakpoint in function
ftrace_int3_handler() for them. Otherwise weird things would happen.

Cc: stable@vger.kernel.org # 3.5+
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-11-05 16:01:47 -05:00
Alexander Duyck
217f155e9f x86/ftrace: Use __pa_symbol instead of __pa on C visible symbols
Instead of using __pa which is meant to be a general function for converting
virtual addresses to physical addresses we can use __pa_symbol which is the
preferred way of decoding kernel text virtual addresses to physical addresses.

In this case we are not directly converting C visible symbols however if we
know that the instruction pointer is somewhere between _text and _etext we
know that we are going to be translating an address form the kernel text
space.

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215718.8521.24026.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-16 16:42:09 -08:00
Steven Rostedt
4de72395ff ftrace/x86: Add save_regs for i386 function calls
Add saving full regs for function tracing on i386.
The saving of regs was influenced by patches sent out by
Masami Hiramatsu.

Link: Link: http://lkml.kernel.org/r/20120711195745.379060003@goodmis.org

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 13:20:37 -04:00
Steven Rostedt
08f6fba503 ftrace/x86: Add separate function to save regs
Add a way to have different functions calling different trampolines.
If a ftrace_ops wants regs saved on the return, then have only the
functions with ops registered to save regs. Functions registered by
other ops would not be affected, unless the functions overlap.

If one ftrace_ops registered functions A, B and C and another ops
registered fucntions to save regs on A, and D, then only functions
A and D would be saving regs. Function B and C would work as normal.
Although A is registered by both ops: normal and saves regs; this is fine
as saving the regs is needed to satisfy one of the ops that calls it
but the regs are ignored by the other ops function.

x86_64 implements the full regs saving, and i386 just passes a NULL
for regs to satisfy the ftrace_ops passing. Where an arch must supply
both regs and ftrace_ops parameters, even if regs is just NULL.

It is OK for an arch to pass NULL regs. All function trace users that
require regs passing must add the flag FTRACE_OPS_FL_SAVE_REGS when
registering the ftrace_ops. If the arch does not support saving regs
then the ftrace_ops will fail to register. The flag
FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED may be set that will prevent the
ftrace_ops from failing to register. In this case, the handler may
either check if regs is not NULL or check if ARCH_SUPPORTS_FTRACE_SAVE_REGS.
If the arch supports passing regs it will set this macro and pass regs
for ops that request them. All other archs will just pass NULL.

Link: Link: http://lkml.kernel.org/r/20120711195745.107705970@goodmis.org

Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-07-19 13:20:03 -04:00
Steven Rostedt
8a4d0a687a ftrace: Use breakpoint method to update ftrace caller
On boot up and module load, it is fine to modify the code directly,
without the use of breakpoints. This is because boot up modification
is done before SMP is initialized, thus the modification is serial,
and module load is done before the module executes.

But after that we must use a SMP safe method to modify running code.
Otherwise, if we are running the function tracer and update its
function (by starting off the stack tracer, or perf tracing)
the change of the function called by the ftrace trampoline is done
directly. If this is being executed on another CPU, that CPU may
take a GPF and crash the kernel.

The breakpoint method is used to change the nops at all the functions, but
the change of the ftrace callback handler itself was still using a
direct modification. If tracing was enabled and the function callback
was changed then another CPU could fault if it was currently calling
the original callback. This modification must use the breakpoint method
too.

Note, the direct method is still used for boot up and module load.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-31 23:12:19 -04:00
Steven Rostedt
a192cd0413 ftrace: Synchronize variable setting with breakpoints
When the function tracer starts modifying the code via breakpoints
it sets a variable (modifying_ftrace_code) to inform the breakpoint
handler to call the ftrace int3 code.

But there's no synchronization between setting this code and the
handler, thus it is possible for the handler to be called on another
CPU before it sees the variable. This will cause a kernel crash as
the int3 handler will not know what to do with it.

I originally added smp_mb()'s to force the visibility of the variable
but H. Peter Anvin suggested that I just make it atomic.

[ Added comments as suggested by Peter Zijlstra ]

Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-31 23:12:17 -04:00
Steven Rostedt
e4f5d5440b ftrace/x86: Have x86 ftrace use the ftrace_modify_all_code()
To remove duplicate code, have the ftrace arch_ftrace_update_code()
use the generic ftrace_modify_all_code(). This requires that the
default ftrace_replace_code() becomes a weak function so that an
arch may override it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-16 20:00:27 -04:00
Steven Rostedt
59a094c994 ftrace/x86: Use asm/kprobes.h instead of linux/kprobes.h
If CONFIG_KPROBES is not set, then linux/kprobes.h will not include
asm/kprobes.h needed by x86/ftrace.c for the BREAKPOINT macro.

The x86/ftrace.c file should just include asm/kprobes.h as it does not
need the rest of kprobes.

Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 09:28:29 -04:00
Steven Rostedt
4a6d70c950 ftrace/x86: Remove the complex ftrace NMI handling code
As ftrace function tracing would require modifying code that could
be executed in NMI context, which is not stopped with stop_machine(),
ftrace had to do a complex algorithm with various stages of setup
and memory barriers to make it work.

With the new breakpoint method, this is no longer required. The changes
to the code can be done without any problem in NMI context, as well as
without stop machine altogether. Remove the complex code as it is
no longer needed.

Also, a lot of the notrace annotations could be removed from the
NMI code as it is now safe to trace them. With the exception of
do_nmi itself, which does some special work to handle running in
the debug stack. The breakpoint method can cause NMIs to double
nest the debug stack if it's not setup properly, and that is done
in do_nmi(), thus that function must not be traced.

(Note the arch sh may want to do the same)

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-04-27 21:11:28 -04:00
Steven Rostedt
08d636b6d4 ftrace/x86: Have arch x86_64 use breakpoints instead of stop machine
This method changes x86 to add a breakpoint to the mcount locations
instead of calling stop machine.

Now that iret can be handled by NMIs, we perform the following to
update code:

1) Add a breakpoint to all locations that will be modified

2) Sync all cores

3) Update all locations to be either a nop or call (except breakpoint
   op)

4) Sync all cores

5) Remove the breakpoint with the new code.

6) Sync all cores

[
  Added updates that Masami suggested:
   Use unlikely(modifying_ftrace_code) in int3 trap to keep kprobes efficient.
   Don't use NOTIFY_* in ftrace handler in int3 as it is not a notifier.
]

Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-04-27 21:10:44 -04:00
Rakib Mullick
0d098a7d1e x86/ftrace: Fix compiler warning in ftrace.c
Due to commit dc326fca2b (x86, cpu: Clean up and unify the NOP selection infrastructure), we get the following warning:

arch/x86/kernel/ftrace.c: In function ‘ftrace_make_nop’:
arch/x86/kernel/ftrace.c:308:6: warning: assignment discards qualifiers from pointer target type
arch/x86/kernel/ftrace.c: In function ‘ftrace_make_call’:
arch/x86/kernel/ftrace.c:318:6: warning: assignment discards qualifiers from pointer target type

ftrace_nop_replace() now returns const unsigned char *, so change its associated function/variable to its compatible type to keep compiler clam.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Link: http://lkml.kernel.org/r/1305221620.7986.4.camel@localhost.localdomain

[ updated for change of const void *src in probe_kernel_write() ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-25 19:56:26 -04:00
H. Peter Anvin
dc326fca2b x86, cpu: Clean up and unify the NOP selection infrastructure
Clean up and unify the NOP selection infrastructure:

- Make the atomic 5-byte NOP a part of the selection system.
- Pick NOPs once during early boot and then be done with it.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Link: http://lkml.kernel.org/r/1303166160-10315-3-git-send-email-hpa@linux.intel.com
2011-04-18 16:40:21 -07:00
Steven Rostedt
722b3c7469 ftrace/graph: Trace function entry before updating index
Currently the index to the ret_stack is updated and the real return address
is saved in the ret_stack. Then we call the trace function. The trace
function could decide that it doesn't want to trace this function
(ex. set_graph_function does not match) and it will return 0 which means
not to trace this call.

The normal function graph tracer has this code:

	if (!(trace->depth || ftrace_graph_addr(trace->func)) ||
	      ftrace_graph_ignore_irqs())
		return 0;

What this states is, if the trace depth (which is curr_ret_stack)
is zero (top of nested functions) then test if we want to trace this
function. If this function is not to be traced, then return  0 and
the rest of the function graph tracer logic will not trace this function.

The problem arises when an interrupt comes in after we updated the
curr_ret_stack. The next function that gets called will have a trace->depth
of 1. Which fools this trace code into thinking that we are in a nested
function, and that we should trace. This causes interrupts to be traced
when they should not be.

The solution is to trace the function first and then update the ret_stack.

Reported-by: zhiping zhong <xzhong86@163.com>
Reported-by: wu zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-03-10 10:34:43 -05:00
Linus Torvalds
72eb6a7914 Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits)
  gameport: use this_cpu_read instead of lookup
  x86: udelay: Use this_cpu_read to avoid address calculation
  x86: Use this_cpu_inc_return for nmi counter
  x86: Replace uses of current_cpu_data with this_cpu ops
  x86: Use this_cpu_ops to optimize code
  vmstat: User per cpu atomics to avoid interrupt disable / enable
  irq_work: Use per cpu atomics instead of regular atomics
  cpuops: Use cmpxchg for xchg to avoid lock semantics
  x86: this_cpu_cmpxchg and this_cpu_xchg operations
  percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support
  percpu,x86: relocate this_cpu_add_return() and friends
  connector: Use this_cpu operations
  xen: Use this_cpu_inc_return
  taskstats: Use this_cpu_ops
  random: Use this_cpu_inc_return
  fs: Use this_cpu_inc_return in buffer.c
  highmem: Use this_cpu_xx_return() operations
  vmstat: Use this_cpu_inc_return for vm statistics
  x86: Support for this_cpu_add, sub, dec, inc_return
  percpu: Generic support for this_cpu_add, sub, dec, inc_return
  ...

Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c}
as per Tejun.
2011-01-07 17:02:58 -08:00
Tejun Heo
0a3aee0da4 x86: Use this_cpu_ops to optimize code
Go through x86 code and replace __get_cpu_var and get_cpu_var
instances that refer to a scalar and are not used for address
determinations.

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-30 12:20:28 +01:00
matthieu castet
84e1c6bb38 x86: Add RO/NX protection for loadable kernel modules
This patch is a logical extension of the protection provided by
CONFIG_DEBUG_RODATA to LKMs. The protection is provided by
splitting module_core and module_init into three logical parts
each and setting appropriate page access permissions for each
individual section:

 1. Code: RO+X
 2. RO data: RO+NX
 3. RW data: RW+NX

In order to achieve proper protection, layout_sections() have
been modified to align each of the three parts mentioned above
onto page boundary. Next, the corresponding page access
permissions are set right before successful exit from
load_module(). Further, free_module() and sys_init_module have
been modified to set module_core and module_init as RW+NX right
before calling module_free().

By default, the original section layout and access flags are
preserved. When compiled with CONFIG_DEBUG_SET_MODULE_RONX=y,
the patch will page-align each group of sections to ensure that
each page contains only one type of content and will enforce
RO/NX for each group of pages.

  -v1: Initial proof-of-concept patch.
  -v2: The patch have been re-written to reduce the number of #ifdefs
       and to make it architecture-agnostic. Code formatting has also
       been corrected.
  -v3: Opportunistic RO/NX protection is now unconditional. Section
       page-alignment is enabled when CONFIG_DEBUG_RODATA=y.
  -v4: Removed most macros and improved coding style.
  -v5: Changed page-alignment and RO/NX section size calculation
  -v6: Fixed comments. Restricted RO/NX enforcement to x86 only
  -v7: Introduced CONFIG_DEBUG_SET_MODULE_RONX, added
       calls to set_all_modules_text_rw() and set_all_modules_text_ro()
       in ftrace
  -v8: updated for compatibility with linux 2.6.33-rc5
  -v9: coding style fixes
 -v10: more coding style fixes
 -v11: minor adjustments for -tip
 -v12: minor adjustments for v2.6.35-rc2-tip
 -v13: minor adjustments for v2.6.37-rc1-tip

Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com>
Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CE2F914.9070106@free.fr>
[ minor cleanliness edits, -v14: build failure fix ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 13:32:56 +01:00
Jason Baron
f49aa44856 jump label: Make dynamic no-op selection available outside of ftrace
Move Steve's code for finding the best 5-byte no-op from ftrace.c to
alternative.c. The idea is that other consumers (in this case jump label)
want to make use of that code.

Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <96259ae74172dcac99c0020c249743c523a92e18.1284733808.git.jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-20 18:19:39 -04:00
Ingo Molnar
6fb83029db Merge branch 'tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/core 2010-02-27 10:06:10 +01:00
Steven Rostedt
0c54dd341f ftrace: Remove memory barriers from NMI code when not needed
The code in stop_machine that modifies the kernel text has a bit
of logic to handle the case of NMIs. stop_machine does not prevent
NMIs from executing, and if an NMI were to trigger on another CPU
as the modifying CPU is changing the NMI text, a GPF could result.

To prevent the GPF, the NMI calls ftrace_nmi_enter() which may
modify the code first, then any other NMIs will just change the
text to the same content which will do no harm. The code that
stop_machine called must wait for NMIs to finish while it changes
each location in the kernel. That code may also change the text
to what the NMI changed it to. The key is that the text will never
change content while another CPU is executing it.

To make the above work, the call to ftrace_nmi_enter() must also
do a smp_mb() as well as atomic_inc().  But for applications like
perf that require a high number of NMIs for profiling, this can have
a dramatic effect on the system. Not only is it doing a full memory
barrier on both nmi_enter() as well as nmi_exit() it is also
modifying a global variable with an atomic operation. This kills
performance on large SMP machines.

Since the memory barriers are only needed when ftrace is in the
process of modifying the text (which is seldom), this patch
adds a "modifying_code" variable that gets set before stop machine
is executed and cleared afterwards.

The NMIs will check this variable and store it in a per CPU
"save_modifying_code" variable that it will use to check if it
needs to do the memory barriers and atomic dec on NMI exit.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-02-25 08:42:06 -05:00
Mike Frysinger
e7b8e675d9 tracing: Unify arch_syscall_addr() implementations
Most implementations of arch_syscall_addr() are the same, so create a
default version in common code and move the one piece that differs (the
syscall table) to asm/syscall.h.  New arch ports don't have to waste
time copying & pasting this simple function.

The s390/sparc versions need to be different, so document why.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1264498803-17278-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-17 13:07:21 +01:00
Linus Torvalds
e33c019722 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits)
  x86, mm: Correct the implementation of is_untracked_pat_range()
  x86/pat: Trivial: don't create debugfs for memtype if pat is disabled
  x86, mtrr: Fix sorting of mtrr after subtracting
  x86: Move find_smp_config() earlier and avoid bootmem usage
  x86, platform: Change is_untracked_pat_range() to bool; cleanup init
  x86: Change is_ISA_range() into an inline function
  x86, mm: is_untracked_pat_range() takes a normal semiclosed range
  x86, mm: Call is_untracked_pat_range() rather than is_ISA_range()
  x86: UV SGI: Don't track GRU space in PAT
  x86: SGI UV: Fix BAU initialization
  x86, numa: Use near(er) online node instead of roundrobin for NUMA
  x86, numa, bootmem: Only free bootmem on NUMA failure path
  x86: Change crash kernel to reserve via reserve_early()
  x86: Eliminate redundant/contradicting cache line size config options
  x86: When cleaning MTRRs, do not fold WP into UC
  x86: remove "extern" from function prototypes in <asm/proto.h>
  x86, mm: Report state of NX protections during boot
  x86, mm: Clean up and simplify NX enablement
  x86, pageattr: Make set_memory_(x|nx) aware of NX support
  x86, sleep: Always save the value of EFER
  ...

Fix up conflicts (added both iommu_shutdown and is_untracked_pat_range)
to 'struct x86_platform_ops') in
	arch/x86/include/asm/x86_init.h
	arch/x86/kernel/x86_init.c
2009-12-08 13:27:33 -08:00
Suresh Siddha
55ca3cc174 x86_64, ftrace: Make ftrace use kernel identity mapping to modify code
On x86_64, kernel text mappings are mapped read-only with
CONFIG_DEBUG_RODATA. So use the kernel identity mapping instead
of the kernel text mapping to modify the kernel text.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20091029024821.080941108@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-02 17:16:36 +01:00
Frederic Weisbecker
c44fc77084 tracing: Move syscalls metadata handling from arch to core
Most of the syscalls metadata processing is done from arch.
But these operations are mostly generic accross archs. Especially now
that we have a common variable name that expresses the number of
syscalls supported by an arch: NR_syscalls, the only remaining bits
that need to reside in arch is the syscall nr to addr translation.

v2: Compare syscalls symbols only after the "sys" prefix so that we
    avoid spurious mismatches with archs that have syscalls wrappers,
    in which case syscalls symbols have "SyS" prefixed aliases.
    (Reported by: Heiko Carstens)

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
2009-10-14 09:53:56 +02:00
Joe Perches
3bb258bf43 ftrace.c: Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- Remove prefixes from pr_<level>, use pr_fmt(fmt).

No change in output.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <9b377eefae9e28c599dd4a17bdc81172965e9931.1254701151.git.joe@perches.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 08:05:40 +02:00
Jason Baron
57421dbbdc tracing: Convert event tracing code to use NR_syscalls
Convert the syscalls event tracing code to use NR_syscalls, instead of
FTRACE_SYSCALL_MAX. NR_syscalls is standard accross most arches, and
reduces code confusion/complexity.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Josh Stone <jistone@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anwin <hpa@zytor.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <9b4f1a84ecae57cc6599412772efa36f0d2b815b.1251146513.git.jbaron@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-26 21:30:02 +02:00
Jason Baron
64c12e0444 tracing: Add individual syscalls tracepoint id support
The current state of syscalls tracepoints generates only one event id
for every syscall events.

This patch associates an id with each syscall trace event, so that we
can identify each syscall trace event using the 'perf' tool.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-11 20:35:28 +02:00
Jason Baron
066e0378c2 tracing: Call arch_init_ftrace_syscalls at boot
Call arch_init_ftrace_syscalls at boot, so we can determine early the
set of syscalls for the syscall trace events.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-11 20:35:26 +02:00
Jason Baron
eeac19a7ef tracing: Map syscall name to number
Add a new function to support translating a syscall name to number at
runtime.
This allows the syscall event tracer to map syscall names to number.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-08-11 20:35:25 +02:00
Frederic Weisbecker
07868b086c tracing/function-graph-tracer: Drop the useless nmi protection
The function graph tracer used to have a protection against NMI
while entering a function entry tracing. But this is useless now,
this tracer is reentrant and the ring buffer supports the NMI tracing.
We can then drop this protection.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2009-08-06 07:28:05 +02:00
Steven Rostedt
71e308a239 function-graph: add stack frame test
In case gcc does something funny with the stack frames, or the return
from function code, we would like to detect that.

An arch may implement passing of a variable that is unique to the
function and can be saved on entering a function and can be tested
when exiting the function. Usually the frame pointer can be used for
this purpose.

This patch also implements this for x86. Where it passes in the stack
frame of the parent function, and will test that frame on exit.

There was a case in x86_32 with optimize for size (-Os) where, for a
few functions, gcc would align the stack frame and place a copy of the
return address into it. The function graph tracer modified the copy and
not the actual return address. On return from the funtion, it did not go
to the tracer hook, but returned to the parent. This broke the function
graph tracer, because the return of the parent (where gcc did not do
this funky manipulation) returned to the location that the child function
was suppose to. This caused strange kernel crashes.

This test detected the problem and pointed out where the issue was.

This modifies the parameters of one of the functions that the arch
specific code calls, so it includes changes to arch code to accommodate
the new prototype.

Note, I notice that the parsic arch implements its own push_return_trace.
This is now a generic function and the ftrace_push_return_trace should be
used instead. This patch does not touch that code.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-18 18:40:18 -04:00
Steven Rostedt
aa512a27e9 x86/function-graph: fix constraint for recording old return value
After upgrading from gcc 4.2.2 to 4.4.0, the function graph tracer broke.
Investigating, I found that in the asm that replaces the return value,
gcc was using the same register for the old value as it was for the
new value.

	mov	(addr), old
	mov	new, (addr)

But if old and new are the same register, we clobber new with old!
I first thought this was a bug in gcc 4.4.0 and reported it:

  http://gcc.gnu.org/bugzilla/show_bug.cgi?id=40132

Andrew Pinski responded (quickly), saying that it was correct gcc behavior
and the code needed to denote old as an "early clobber".

Instead of "=r"(old), we need "=&r"(old).

[Impact: keep function graph tracer from breaking with gcc 4.4.0 ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-13 13:52:19 -04:00
Frederic Weisbecker
47788c58e6 tracing/syscalls: use a dedicated file header
Impact: fix build warnings and possibe compat misbehavior on IA64

Building a kernel on ia64 might trigger these ugly build warnings:

CC      arch/ia64/ia32/sys_ia32.o
In file included from arch/ia64/ia32/sys_ia32.c:55:
arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined
In file included from include/linux/elf.h:7,
                 from include/linux/module.h:14,
                 from include/linux/ftrace.h:8,
                 from include/linux/syscalls.h:68,
                 from arch/ia64/ia32/sys_ia32.c:18:
arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition
[...]

sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h
to import the syscalls tracing prototypes.

But including ftrace.h can pull too much things for a low level file,
especially on ia64 where the ia32 private headers conflict with higher
level headers.

Now we isolate the syscall tracing headers in their own lightweight file.

Reported-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jason Baron <jbaron@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Michael Davidson <md@google.com>
LKML-Reference: <20090408184058.GB6017@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09 05:43:32 +02:00
Huang Weiyi
5ab8026a30 tracing, x86: remove duplicated #include
Remove duplicated #include in arch/x86/kernel/ftrace.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
LKML-Reference: <1238503291-2532-1-git-send-email-weiyi.huang@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-07 14:01:53 +02:00
Steven Rostedt
5d1a03dc54 function-graph: moved the timestamp from arch to generic code
This patch move the timestamp from happening in the arch specific
code into the general code. This allows for better control by the tracer
to time manipulation.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-24 09:31:34 -04:00
Lai Jiangshan
e9d9df4473 ftrace: protect running nmi (V3)
When I review the sensitive code ftrace_nmi_enter(), I found
the atomic variable nmi_running does protect NMI VS do_ftrace_mod_code(),
but it can not protects NMI(entered nmi) VS NMI(ftrace_nmi_enter()).

cpu#1                   | cpu#2                 | cpu#3
ftrace_nmi_enter()      | do_ftrace_mod_code()  |
  not modify            |                       |
------------------------|-----------------------|--
executing               | set mod_code_write = 1|
executing             --|-----------------------|--------------------
executing               |                       | ftrace_nmi_enter()
executing               |                       |    do modify
------------------------|-----------------------|-----------------
ftrace_nmi_exit()       |                       |

cpu#3 may be being modified the code which is still being executed on cpu#1,
it will have undefined results and possibly take a GPF, this patch
prevents it occurred.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49C0B411.30003@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-18 20:36:59 -04:00
Frederic Weisbecker
f58ba10067 tracing/syscalls: support for syscalls tracing on x86
Extend x86 architecture syscall tracing support with syscall
metadata table details.

(The upcoming core syscall tracing modifications rely on this.)

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236955332-10133-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13 16:57:42 +01:00
Frederic Weisbecker
0012693ad4 tracing/function-graph-tracer: use the more lightweight local clock
Impact: decrease hangs risks with the graph tracer on slow systems

Since the function graph tracer can spend too much time on timer
interrupts, it's better now to use the more lightweight local
clock. Anyway, the function graph traces are more reliable on a
per cpu trace.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <49af243d.06e9300a.53ad.ffff840c@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-05 12:14:41 +01:00