/* * pata_cmd640.c - CMD640 PCI PATA for new ATA layer * (C) 2007 Red Hat Inc * Alan Cox * * Based upon * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 * * Copyright (C) 1995-1996 Linus Torvalds & authors (see driver) * * This drives only the PCI version of the controller. If you have a * VLB one then we have enough docs to support it but you can write * your own code. */ #include #include #include #include #include #include #include #include #define DRV_NAME "pata_cmd640" #define DRV_VERSION "0.0.3" struct cmd640_reg { int last; u8 reg58[ATA_MAX_DEVICES]; }; enum { CFR = 0x50, CNTRL = 0x51, CMDTIM = 0x52, ARTIM0 = 0x53, DRWTIM0 = 0x54, ARTIM23 = 0x57, DRWTIM23 = 0x58, BRST = 0x59 }; /** * cmd640_set_piomode - set initial PIO mode data * @adev: ATA device * * Called to do the PIO mode setup. */ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct cmd640_reg *timing = ap->private_data; struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct ata_timing t; const unsigned long T = 1000000 / 33; const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 }; u8 reg; int arttim = ARTIM0 + 2 * adev->devno; struct ata_device *pair = ata_dev_pair(adev); if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) { printk(KERN_ERR DRV_NAME ": mode computation failed.\n"); return; } /* The second channel has shared timings and the setup timing is messy to switch to merge it for worst case */ if (ap->port_no && pair) { struct ata_timing p; ata_timing_compute(pair, pair->pio_mode, &p, T, 1); ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP); } /* Make the timings fit */ if (t.recover > 16) { t.active += t.recover - 16; t.recover = 16; } if (t.active > 16) t.active = 16; /* Now convert the clocks into values we can actually stuff into the chip */ if (t.recover > 1) t.recover--; /* 640B only */ else t.recover = 15; if (t.setup > 4) t.setup = 0xC0; else t.setup = setup_data[t.setup]; if (ap->port_no == 0) { t.active &= 0x0F; /* 0 = 16 */ /* Load setup timing */ pci_read_config_byte(pdev, arttim, ®); reg &= 0x3F; reg |= t.setup; pci_write_config_byte(pdev, arttim, reg); /* Load active/recovery */ pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover); } else { /* Save the shared timings for channel, they will be loaded by qc_issue_prot. Reloading the setup time is expensive so we keep a merged one loaded */ pci_read_config_byte(pdev, ARTIM23, ®); reg &= 0x3F; reg |= t.setup; pci_write_config_byte(pdev, ARTIM23, reg); timing->reg58[adev->devno] = (t.active << 4) | t.recover; } } /** * cmd640_qc_issue_prot - command preparation hook * @qc: Command to be issued * * Channel 1 has shared timings. We must reprogram the * clock each drive 2/3 switch we do. */ static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_device *adev = qc->dev; struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct cmd640_reg *timing = ap->private_data; if (ap->port_no != 0 && adev->devno != timing->last) { pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]); timing->last = adev->devno; } return ata_qc_issue_prot(qc); } /** * cmd640_port_start - port setup * @ap: ATA port being set up * * The CMD640 needs to maintain private data structures so we * allocate space here. */ static int cmd640_port_start(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct cmd640_reg *timing; int ret = ata_port_start(ap); if (ret < 0) return ret; timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL); if (timing == NULL) return -ENOMEM; timing->last = -1; /* Force a load */ ap->private_data = timing; return ret; } static struct scsi_host_template cmd640_sht = { .module = THIS_MODULE, .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, .resume = ata_scsi_device_resume, .suspend = ata_scsi_device_suspend, }; static struct ata_port_operations cmd640_port_ops = { .port_disable = ata_port_disable, .set_piomode = cmd640_set_piomode, .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = ata_cable_40wire, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = cmd640_qc_issue_prot, /* In theory this is not needed once we kill the prefetcher */ .data_xfer = ata_data_xfer_noirq, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, .port_start = cmd640_port_start, }; static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { u8 r; u8 ctrl; static struct ata_port_info info = { .sht = &cmd640_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, .pio_mask = 0x1f, .port_ops = &cmd640_port_ops }; static struct ata_port_info *port_info[2] = { &info, &info }; /* CMD640 detected, commiserations */ pci_write_config_byte(pdev, 0x5C, 0x00); /* Get version info */ pci_read_config_byte(pdev, CFR, &r); /* PIO0 command cycles */ pci_write_config_byte(pdev, CMDTIM, 0); /* 512 byte bursts (sector) */ pci_write_config_byte(pdev, BRST, 0x40); /* * A reporter a long time ago * Had problems with the data fifo * So don't run the risk * Of putting crap on the disk * For its better just to go slow */ /* Do channel 0 */ pci_read_config_byte(pdev, CNTRL, &ctrl); pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0); /* Ditto for channel 1 */ pci_read_config_byte(pdev, ARTIM23, &ctrl); ctrl |= 0x0C; pci_write_config_byte(pdev, ARTIM23, ctrl); return ata_pci_init_one(pdev, port_info, 2); } static int cmd640_reinit_one(struct pci_dev *pdev) { return ata_pci_device_resume(pdev); } static const struct pci_device_id cmd640[] = { { PCI_VDEVICE(CMD, 0x640), 0 }, { }, }; static struct pci_driver cmd640_pci_driver = { .name = DRV_NAME, .id_table = cmd640, .probe = cmd640_init_one, .remove = ata_pci_remove_one, .suspend = ata_pci_device_suspend, .resume = cmd640_reinit_one, }; static int __init cmd640_init(void) { return pci_register_driver(&cmd640_pci_driver); } static void __exit cmd640_exit(void) { pci_unregister_driver(&cmd640_pci_driver); } MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, cmd640); MODULE_VERSION(DRV_VERSION); module_init(cmd640_init); module_exit(cmd640_exit);