/** * Functions implementing wlan scan IOCTL and firmware command APIs * * IOCTL handlers as well as command preperation and response routines * for sending scan commands to the firmware. */ #include #include #include #include #include #include #include #include "host.h" #include "decl.h" #include "dev.h" #include "scan.h" //! Approximate amount of data needed to pass a scan result back to iwlist #define MAX_SCAN_CELL_SIZE (IW_EV_ADDR_LEN \ + IW_ESSID_MAX_SIZE \ + IW_EV_UINT_LEN \ + IW_EV_FREQ_LEN \ + IW_EV_QUAL_LEN \ + IW_ESSID_MAX_SIZE \ + IW_EV_PARAM_LEN \ + 40) /* 40 for WPAIE */ //! Memory needed to store a max sized channel List TLV for a firmware scan #define CHAN_TLV_MAX_SIZE (sizeof(struct mrvlietypesheader) \ + (MRVDRV_MAX_CHANNELS_PER_SCAN \ * sizeof(struct chanscanparamset))) //! Memory needed to store a max number/size SSID TLV for a firmware scan #define SSID_TLV_MAX_SIZE (1 * sizeof(struct mrvlietypes_ssidparamset)) //! Maximum memory needed for a wlan_scan_cmd_config with all TLVs at max #define MAX_SCAN_CFG_ALLOC (sizeof(struct wlan_scan_cmd_config) \ + sizeof(struct mrvlietypes_numprobes) \ + CHAN_TLV_MAX_SIZE \ + SSID_TLV_MAX_SIZE) //! The maximum number of channels the firmware can scan per command #define MRVDRV_MAX_CHANNELS_PER_SCAN 14 /** * @brief Number of channels to scan per firmware scan command issuance. * * Number restricted to prevent hitting the limit on the amount of scan data * returned in a single firmware scan command. */ #define MRVDRV_CHANNELS_PER_SCAN_CMD 4 //! Scan time specified in the channel TLV for each channel for passive scans #define MRVDRV_PASSIVE_SCAN_CHAN_TIME 100 //! Scan time specified in the channel TLV for each channel for active scans #define MRVDRV_ACTIVE_SCAN_CHAN_TIME 100 static const u8 zeromac[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const u8 bcastmac[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; static inline void clear_bss_descriptor (struct bss_descriptor * bss) { /* Don't blow away ->list, just BSS data */ memset(bss, 0, offsetof(struct bss_descriptor, list)); } static inline int match_bss_no_security(struct wlan_802_11_security * secinfo, struct bss_descriptor * match_bss) { if ( !secinfo->wep_enabled && !secinfo->WPAenabled && !secinfo->WPA2enabled && match_bss->wpa_ie[0] != MFIE_TYPE_GENERIC && match_bss->rsn_ie[0] != MFIE_TYPE_RSN && !(match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { return 1; } return 0; } static inline int match_bss_static_wep(struct wlan_802_11_security * secinfo, struct bss_descriptor * match_bss) { if ( secinfo->wep_enabled && !secinfo->WPAenabled && !secinfo->WPA2enabled && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { return 1; } return 0; } static inline int match_bss_wpa(struct wlan_802_11_security * secinfo, struct bss_descriptor * match_bss) { if ( !secinfo->wep_enabled && secinfo->WPAenabled && (match_bss->wpa_ie[0] == MFIE_TYPE_GENERIC) /* privacy bit may NOT be set in some APs like LinkSys WRT54G && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { */ ) { return 1; } return 0; } static inline int match_bss_wpa2(struct wlan_802_11_security * secinfo, struct bss_descriptor * match_bss) { if ( !secinfo->wep_enabled && secinfo->WPA2enabled && (match_bss->rsn_ie[0] == MFIE_TYPE_RSN) /* privacy bit may NOT be set in some APs like LinkSys WRT54G && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { */ ) { return 1; } return 0; } static inline int match_bss_dynamic_wep(struct wlan_802_11_security * secinfo, struct bss_descriptor * match_bss) { if ( !secinfo->wep_enabled && !secinfo->WPAenabled && !secinfo->WPA2enabled && (match_bss->wpa_ie[0] != MFIE_TYPE_GENERIC) && (match_bss->rsn_ie[0] != MFIE_TYPE_RSN) && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) { return 1; } return 0; } /** * @brief Check if a scanned network compatible with the driver settings * * WEP WPA WPA2 ad-hoc encrypt Network * enabled enabled enabled AES mode privacy WPA WPA2 Compatible * 0 0 0 0 NONE 0 0 0 yes No security * 1 0 0 0 NONE 1 0 0 yes Static WEP * 0 1 0 0 x 1x 1 x yes WPA * 0 0 1 0 x 1x x 1 yes WPA2 * 0 0 0 1 NONE 1 0 0 yes Ad-hoc AES * 0 0 0 0 !=NONE 1 0 0 yes Dynamic WEP * * * @param adapter A pointer to wlan_adapter * @param index Index in scantable to check against current driver settings * @param mode Network mode: Infrastructure or IBSS * * @return Index in scantable, or error code if negative */ static int is_network_compatible(wlan_adapter * adapter, struct bss_descriptor * bss, u8 mode) { int matched = 0; lbs_deb_enter(LBS_DEB_ASSOC); if (bss->mode != mode) goto done; if ((matched = match_bss_no_security(&adapter->secinfo, bss))) { goto done; } else if ((matched = match_bss_static_wep(&adapter->secinfo, bss))) { goto done; } else if ((matched = match_bss_wpa(&adapter->secinfo, bss))) { lbs_deb_scan( "is_network_compatible() WPA: wpa_ie=%#x " "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s " "privacy=%#x\n", bss->wpa_ie[0], bss->rsn_ie[0], adapter->secinfo.wep_enabled ? "e" : "d", adapter->secinfo.WPAenabled ? "e" : "d", adapter->secinfo.WPA2enabled ? "e" : "d", (bss->capability & WLAN_CAPABILITY_PRIVACY)); goto done; } else if ((matched = match_bss_wpa2(&adapter->secinfo, bss))) { lbs_deb_scan( "is_network_compatible() WPA2: wpa_ie=%#x " "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s " "privacy=%#x\n", bss->wpa_ie[0], bss->rsn_ie[0], adapter->secinfo.wep_enabled ? "e" : "d", adapter->secinfo.WPAenabled ? "e" : "d", adapter->secinfo.WPA2enabled ? "e" : "d", (bss->capability & WLAN_CAPABILITY_PRIVACY)); goto done; } else if ((matched = match_bss_dynamic_wep(&adapter->secinfo, bss))) { lbs_deb_scan( "is_network_compatible() dynamic WEP: " "wpa_ie=%#x wpa2_ie=%#x privacy=%#x\n", bss->wpa_ie[0], bss->rsn_ie[0], (bss->capability & WLAN_CAPABILITY_PRIVACY)); goto done; } /* bss security settings don't match those configured on card */ lbs_deb_scan( "is_network_compatible() FAILED: wpa_ie=%#x " "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s privacy=%#x\n", bss->wpa_ie[0], bss->rsn_ie[0], adapter->secinfo.wep_enabled ? "e" : "d", adapter->secinfo.WPAenabled ? "e" : "d", adapter->secinfo.WPA2enabled ? "e" : "d", (bss->capability & WLAN_CAPABILITY_PRIVACY)); done: lbs_deb_leave(LBS_DEB_SCAN); return matched; } /** * @brief Create a channel list for the driver to scan based on region info * * Use the driver region/band information to construct a comprehensive list * of channels to scan. This routine is used for any scan that is not * provided a specific channel list to scan. * * @param priv A pointer to wlan_private structure * @param scanchanlist Output parameter: resulting channel list to scan * @param filteredscan Flag indicating whether or not a BSSID or SSID filter * is being sent in the command to firmware. Used to * increase the number of channels sent in a scan * command and to disable the firmware channel scan * filter. * * @return void */ static void wlan_scan_create_channel_list(wlan_private * priv, struct chanscanparamset * scanchanlist, u8 filteredscan) { wlan_adapter *adapter = priv->adapter; struct region_channel *scanregion; struct chan_freq_power *cfp; int rgnidx; int chanidx; int nextchan; u8 scantype; chanidx = 0; /* Set the default scan type to the user specified type, will later * be changed to passive on a per channel basis if restricted by * regulatory requirements (11d or 11h) */ scantype = adapter->scantype; for (rgnidx = 0; rgnidx < ARRAY_SIZE(adapter->region_channel); rgnidx++) { if (priv->adapter->enable11d && adapter->connect_status != libertas_connected) { /* Scan all the supported chan for the first scan */ if (!adapter->universal_channel[rgnidx].valid) continue; scanregion = &adapter->universal_channel[rgnidx]; /* clear the parsed_region_chan for the first scan */ memset(&adapter->parsed_region_chan, 0x00, sizeof(adapter->parsed_region_chan)); } else { if (!adapter->region_channel[rgnidx].valid) continue; scanregion = &adapter->region_channel[rgnidx]; } for (nextchan = 0; nextchan < scanregion->nrcfp; nextchan++, chanidx++) { cfp = scanregion->CFP + nextchan; if (priv->adapter->enable11d) { scantype = libertas_get_scan_type_11d(cfp->channel, &adapter-> parsed_region_chan); } switch (scanregion->band) { case BAND_B: case BAND_G: default: scanchanlist[chanidx].radiotype = cmd_scan_radio_type_bg; break; } if (scantype == cmd_scan_type_passive) { scanchanlist[chanidx].maxscantime = cpu_to_le16(MRVDRV_PASSIVE_SCAN_CHAN_TIME); scanchanlist[chanidx].chanscanmode.passivescan = 1; } else { scanchanlist[chanidx].maxscantime = cpu_to_le16(MRVDRV_ACTIVE_SCAN_CHAN_TIME); scanchanlist[chanidx].chanscanmode.passivescan = 0; } scanchanlist[chanidx].channumber = cfp->channel; if (filteredscan) { scanchanlist[chanidx].chanscanmode. disablechanfilt = 1; } } } } /** * @brief Construct a wlan_scan_cmd_config structure to use in issue scan cmds * * Application layer or other functions can invoke wlan_scan_networks * with a scan configuration supplied in a wlan_ioctl_user_scan_cfg struct. * This structure is used as the basis of one or many wlan_scan_cmd_config * commands that are sent to the command processing module and sent to * firmware. * * Create a wlan_scan_cmd_config based on the following user supplied * parameters (if present): * - SSID filter * - BSSID filter * - Number of Probes to be sent * - channel list * * If the SSID or BSSID filter is not present, disable/clear the filter. * If the number of probes is not set, use the adapter default setting * Qualify the channel * * @param priv A pointer to wlan_private structure * @param puserscanin NULL or pointer to scan configuration parameters * @param ppchantlvout Output parameter: Pointer to the start of the * channel TLV portion of the output scan config * @param pscanchanlist Output parameter: Pointer to the resulting channel * list to scan * @param pmaxchanperscan Output parameter: Number of channels to scan for * each issuance of the firmware scan command * @param pfilteredscan Output parameter: Flag indicating whether or not * a BSSID or SSID filter is being sent in the * command to firmware. Used to increase the number * of channels sent in a scan command and to * disable the firmware channel scan filter. * @param pscancurrentonly Output parameter: Flag indicating whether or not * we are only scanning our current active channel * * @return resulting scan configuration */ static struct wlan_scan_cmd_config * wlan_scan_setup_scan_config(wlan_private * priv, const struct wlan_ioctl_user_scan_cfg * puserscanin, struct mrvlietypes_chanlistparamset ** ppchantlvout, struct chanscanparamset * pscanchanlist, int *pmaxchanperscan, u8 * pfilteredscan, u8 * pscancurrentonly) { wlan_adapter *adapter = priv->adapter; struct mrvlietypes_numprobes *pnumprobestlv; struct mrvlietypes_ssidparamset *pssidtlv; struct wlan_scan_cmd_config * pscancfgout = NULL; u8 *ptlvpos; u16 numprobes; int chanidx; int scantype; int scandur; int channel; int radiotype; pscancfgout = kzalloc(MAX_SCAN_CFG_ALLOC, GFP_KERNEL); if (pscancfgout == NULL) goto out; /* The tlvbufferlen is calculated for each scan command. The TLVs added * in this routine will be preserved since the routine that sends * the command will append channelTLVs at *ppchantlvout. The difference * between the *ppchantlvout and the tlvbuffer start will be used * to calculate the size of anything we add in this routine. */ pscancfgout->tlvbufferlen = 0; /* Running tlv pointer. Assigned to ppchantlvout at end of function * so later routines know where channels can be added to the command buf */ ptlvpos = pscancfgout->tlvbuffer; /* * Set the initial scan paramters for progressive scanning. If a specific * BSSID or SSID is used, the number of channels in the scan command * will be increased to the absolute maximum */ *pmaxchanperscan = MRVDRV_CHANNELS_PER_SCAN_CMD; /* Initialize the scan as un-filtered by firmware, set to TRUE below if * a SSID or BSSID filter is sent in the command */ *pfilteredscan = 0; /* Initialize the scan as not being only on the current channel. If * the channel list is customized, only contains one channel, and * is the active channel, this is set true and data flow is not halted. */ *pscancurrentonly = 0; if (puserscanin) { /* Set the bss type scan filter, use adapter setting if unset */ pscancfgout->bsstype = (puserscanin->bsstype ? puserscanin->bsstype : adapter-> scanmode); /* Set the number of probes to send, use adapter setting if unset */ numprobes = (puserscanin->numprobes ? puserscanin->numprobes : adapter->scanprobes); /* * Set the BSSID filter to the incoming configuration, * if non-zero. If not set, it will remain disabled (all zeros). */ memcpy(pscancfgout->bssid, puserscanin->bssid, sizeof(pscancfgout->bssid)); if (puserscanin->ssid_len) { pssidtlv = (struct mrvlietypes_ssidparamset *) pscancfgout-> tlvbuffer; pssidtlv->header.type = cpu_to_le16(TLV_TYPE_SSID); pssidtlv->header.len = cpu_to_le16(puserscanin->ssid_len); memcpy(pssidtlv->ssid, puserscanin->ssid, puserscanin->ssid_len); ptlvpos += sizeof(pssidtlv->header) + puserscanin->ssid_len; } /* * The default number of channels sent in the command is low to * ensure the response buffer from the firmware does not truncate * scan results. That is not an issue with an SSID or BSSID * filter applied to the scan results in the firmware. */ if ( puserscanin->ssid_len || (compare_ether_addr(pscancfgout->bssid, &zeromac[0]) != 0)) { *pmaxchanperscan = MRVDRV_MAX_CHANNELS_PER_SCAN; *pfilteredscan = 1; } } else { pscancfgout->bsstype = adapter->scanmode; numprobes = adapter->scanprobes; } /* If the input config or adapter has the number of Probes set, add tlv */ if (numprobes) { pnumprobestlv = (struct mrvlietypes_numprobes *) ptlvpos; pnumprobestlv->header.type = cpu_to_le16(TLV_TYPE_NUMPROBES); pnumprobestlv->header.len = cpu_to_le16(2); pnumprobestlv->numprobes = cpu_to_le16(numprobes); ptlvpos += sizeof(*pnumprobestlv); } /* * Set the output for the channel TLV to the address in the tlv buffer * past any TLVs that were added in this fuction (SSID, numprobes). * channel TLVs will be added past this for each scan command, preserving * the TLVs that were previously added. */ *ppchantlvout = (struct mrvlietypes_chanlistparamset *) ptlvpos; if (puserscanin && puserscanin->chanlist[0].channumber) { lbs_deb_scan("Scan: Using supplied channel list\n"); for (chanidx = 0; chanidx < WLAN_IOCTL_USER_SCAN_CHAN_MAX && puserscanin->chanlist[chanidx].channumber; chanidx++) { channel = puserscanin->chanlist[chanidx].channumber; (pscanchanlist + chanidx)->channumber = channel; radiotype = puserscanin->chanlist[chanidx].radiotype; (pscanchanlist + chanidx)->radiotype = radiotype; scantype = puserscanin->chanlist[chanidx].scantype; if (scantype == cmd_scan_type_passive) { (pscanchanlist + chanidx)->chanscanmode.passivescan = 1; } else { (pscanchanlist + chanidx)->chanscanmode.passivescan = 0; } if (puserscanin->chanlist[chanidx].scantime) { scandur = puserscanin->chanlist[chanidx].scantime; } else { if (scantype == cmd_scan_type_passive) { scandur = MRVDRV_PASSIVE_SCAN_CHAN_TIME; } else { scandur = MRVDRV_ACTIVE_SCAN_CHAN_TIME; } } (pscanchanlist + chanidx)->minscantime = cpu_to_le16(scandur); (pscanchanlist + chanidx)->maxscantime = cpu_to_le16(scandur); } /* Check if we are only scanning the current channel */ if ((chanidx == 1) && (puserscanin->chanlist[0].channumber == priv->adapter->curbssparams.channel)) { *pscancurrentonly = 1; lbs_deb_scan("Scan: Scanning current channel only"); } } else { lbs_deb_scan("Scan: Creating full region channel list\n"); wlan_scan_create_channel_list(priv, pscanchanlist, *pfilteredscan); } out: return pscancfgout; } /** * @brief Construct and send multiple scan config commands to the firmware * * Previous routines have created a wlan_scan_cmd_config with any requested * TLVs. This function splits the channel TLV into maxchanperscan lists * and sends the portion of the channel TLV along with the other TLVs * to the wlan_cmd routines for execution in the firmware. * * @param priv A pointer to wlan_private structure * @param maxchanperscan Maximum number channels to be included in each * scan command sent to firmware * @param filteredscan Flag indicating whether or not a BSSID or SSID * filter is being used for the firmware command * scan command sent to firmware * @param pscancfgout Scan configuration used for this scan. * @param pchantlvout Pointer in the pscancfgout where the channel TLV * should start. This is past any other TLVs that * must be sent down in each firmware command. * @param pscanchanlist List of channels to scan in maxchanperscan segments * * @return 0 or error return otherwise */ static int wlan_scan_channel_list(wlan_private * priv, int maxchanperscan, u8 filteredscan, struct wlan_scan_cmd_config * pscancfgout, struct mrvlietypes_chanlistparamset * pchantlvout, struct chanscanparamset * pscanchanlist, const struct wlan_ioctl_user_scan_cfg * puserscanin, int full_scan) { struct chanscanparamset *ptmpchan; struct chanscanparamset *pstartchan; u8 scanband; int doneearly; int tlvidx; int ret = 0; int scanned = 0; union iwreq_data wrqu; lbs_deb_enter(LBS_DEB_ASSOC); if (pscancfgout == 0 || pchantlvout == 0 || pscanchanlist == 0) { lbs_deb_scan("Scan: Null detect: %p, %p, %p\n", pscancfgout, pchantlvout, pscanchanlist); return -1; } pchantlvout->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); /* Set the temp channel struct pointer to the start of the desired list */ ptmpchan = pscanchanlist; if (priv->adapter->last_scanned_channel && !puserscanin) ptmpchan += priv->adapter->last_scanned_channel; /* Loop through the desired channel list, sending a new firmware scan * commands for each maxchanperscan channels (or for 1,6,11 individually * if configured accordingly) */ while (ptmpchan->channumber) { tlvidx = 0; pchantlvout->header.len = 0; scanband = ptmpchan->radiotype; pstartchan = ptmpchan; doneearly = 0; /* Construct the channel TLV for the scan command. Continue to * insert channel TLVs until: * - the tlvidx hits the maximum configured per scan command * - the next channel to insert is 0 (end of desired channel list) * - doneearly is set (controlling individual scanning of 1,6,11) */ while (tlvidx < maxchanperscan && ptmpchan->channumber && !doneearly && scanned < 2) { lbs_deb_scan( "Scan: Chan(%3d), Radio(%d), mode(%d,%d), Dur(%d)\n", ptmpchan->channumber, ptmpchan->radiotype, ptmpchan->chanscanmode.passivescan, ptmpchan->chanscanmode.disablechanfilt, ptmpchan->maxscantime); /* Copy the current channel TLV to the command being prepared */ memcpy(pchantlvout->chanscanparam + tlvidx, ptmpchan, sizeof(pchantlvout->chanscanparam)); /* Increment the TLV header length by the size appended */ /* Ew, it would be _so_ nice if we could just declare the variable little-endian and let GCC handle it for us */ pchantlvout->header.len = cpu_to_le16(le16_to_cpu(pchantlvout->header.len) + sizeof(pchantlvout->chanscanparam)); /* * The tlv buffer length is set to the number of bytes of the * between the channel tlv pointer and the start of the * tlv buffer. This compensates for any TLVs that were appended * before the channel list. */ pscancfgout->tlvbufferlen = ((u8 *) pchantlvout - pscancfgout->tlvbuffer); /* Add the size of the channel tlv header and the data length */ pscancfgout->tlvbufferlen += (sizeof(pchantlvout->header) + le16_to_cpu(pchantlvout->header.len)); /* Increment the index to the channel tlv we are constructing */ tlvidx++; doneearly = 0; /* Stop the loop if the *current* channel is in the 1,6,11 set * and we are not filtering on a BSSID or SSID. */ if (!filteredscan && (ptmpchan->channumber == 1 || ptmpchan->channumber == 6 || ptmpchan->channumber == 11)) { doneearly = 1; } /* Increment the tmp pointer to the next channel to be scanned */ ptmpchan++; scanned++; /* Stop the loop if the *next* channel is in the 1,6,11 set. * This will cause it to be the only channel scanned on the next * interation */ if (!filteredscan && (ptmpchan->channumber == 1 || ptmpchan->channumber == 6 || ptmpchan->channumber == 11)) { doneearly = 1; } } /* Send the scan command to the firmware with the specified cfg */ ret = libertas_prepare_and_send_command(priv, cmd_802_11_scan, 0, 0, 0, pscancfgout); if (scanned >= 2 && !full_scan) { ret = 0; goto done; } scanned = 0; } done: priv->adapter->last_scanned_channel = ptmpchan->channumber; /* Tell userspace the scan table has been updated */ memset(&wrqu, 0, sizeof(union iwreq_data)); wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL); lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); return ret; } static void clear_selected_scan_list_entries(wlan_adapter * adapter, const struct wlan_ioctl_user_scan_cfg * scan_cfg) { struct bss_descriptor * bss; struct bss_descriptor * safe; u32 clear_ssid_flag = 0, clear_bssid_flag = 0; if (!scan_cfg) return; if (scan_cfg->clear_ssid && scan_cfg->ssid_len) clear_ssid_flag = 1; if (scan_cfg->clear_bssid && (compare_ether_addr(scan_cfg->bssid, &zeromac[0]) != 0) && (compare_ether_addr(scan_cfg->bssid, &bcastmac[0]) != 0)) { clear_bssid_flag = 1; } if (!clear_ssid_flag && !clear_bssid_flag) return; mutex_lock(&adapter->lock); list_for_each_entry_safe (bss, safe, &adapter->network_list, list) { u32 clear = 0; /* Check for an SSID match */ if ( clear_ssid_flag && (bss->ssid_len == scan_cfg->ssid_len) && !memcmp(bss->ssid, scan_cfg->ssid, bss->ssid_len)) clear = 1; /* Check for a BSSID match */ if ( clear_bssid_flag && !compare_ether_addr(bss->bssid, scan_cfg->bssid)) clear = 1; if (clear) { list_move_tail (&bss->list, &adapter->network_free_list); clear_bss_descriptor(bss); } } mutex_unlock(&adapter->lock); } /** * @brief Internal function used to start a scan based on an input config * * Use the input user scan configuration information when provided in * order to send the appropriate scan commands to firmware to populate or * update the internal driver scan table * * @param priv A pointer to wlan_private structure * @param puserscanin Pointer to the input configuration for the requested * scan. * * @return 0 or < 0 if error */ int wlan_scan_networks(wlan_private * priv, const struct wlan_ioctl_user_scan_cfg * puserscanin, int full_scan) { wlan_adapter * adapter = priv->adapter; struct mrvlietypes_chanlistparamset *pchantlvout; struct chanscanparamset * scan_chan_list = NULL; struct wlan_scan_cmd_config * scan_cfg = NULL; u8 filteredscan; u8 scancurrentchanonly; int maxchanperscan; int ret; #ifdef CONFIG_LIBERTAS_DEBUG struct bss_descriptor * iter_bss; int i = 0; #endif lbs_deb_enter(LBS_DEB_ASSOC); scan_chan_list = kzalloc(sizeof(struct chanscanparamset) * WLAN_IOCTL_USER_SCAN_CHAN_MAX, GFP_KERNEL); if (scan_chan_list == NULL) { ret = -ENOMEM; goto out; } scan_cfg = wlan_scan_setup_scan_config(priv, puserscanin, &pchantlvout, scan_chan_list, &maxchanperscan, &filteredscan, &scancurrentchanonly); if (scan_cfg == NULL) { ret = -ENOMEM; goto out; } clear_selected_scan_list_entries(adapter, puserscanin); /* Keep the data path active if we are only scanning our current channel */ if (!scancurrentchanonly) { netif_stop_queue(priv->dev); netif_carrier_off(priv->dev); netif_stop_queue(priv->mesh_dev); netif_carrier_off(priv->mesh_dev); } ret = wlan_scan_channel_list(priv, maxchanperscan, filteredscan, scan_cfg, pchantlvout, scan_chan_list, puserscanin, full_scan); #ifdef CONFIG_LIBERTAS_DEBUG /* Dump the scan table */ mutex_lock(&adapter->lock); list_for_each_entry (iter_bss, &adapter->network_list, list) { lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n", i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi, escape_essid(iter_bss->ssid, iter_bss->ssid_len)); } mutex_unlock(&adapter->lock); #endif if (priv->adapter->connect_status == libertas_connected) { netif_carrier_on(priv->dev); netif_wake_queue(priv->dev); netif_carrier_on(priv->mesh_dev); netif_wake_queue(priv->mesh_dev); } out: if (scan_cfg) kfree(scan_cfg); if (scan_chan_list) kfree(scan_chan_list); lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); return ret; } /** * @brief Inspect the scan response buffer for pointers to expected TLVs * * TLVs can be included at the end of the scan response BSS information. * Parse the data in the buffer for pointers to TLVs that can potentially * be passed back in the response * * @param ptlv Pointer to the start of the TLV buffer to parse * @param tlvbufsize size of the TLV buffer * @param ptsftlv Output parameter: Pointer to the TSF TLV if found * * @return void */ static void wlan_ret_802_11_scan_get_tlv_ptrs(struct mrvlietypes_data * ptlv, int tlvbufsize, struct mrvlietypes_tsftimestamp ** ptsftlv) { struct mrvlietypes_data *pcurrenttlv; int tlvbufleft; u16 tlvtype; u16 tlvlen; pcurrenttlv = ptlv; tlvbufleft = tlvbufsize; *ptsftlv = NULL; lbs_deb_scan("SCAN_RESP: tlvbufsize = %d\n", tlvbufsize); lbs_dbg_hex("SCAN_RESP: TLV Buf", (u8 *) ptlv, tlvbufsize); while (tlvbufleft >= sizeof(struct mrvlietypesheader)) { tlvtype = le16_to_cpu(pcurrenttlv->header.type); tlvlen = le16_to_cpu(pcurrenttlv->header.len); switch (tlvtype) { case TLV_TYPE_TSFTIMESTAMP: *ptsftlv = (struct mrvlietypes_tsftimestamp *) pcurrenttlv; break; default: lbs_deb_scan("SCAN_RESP: Unhandled TLV = %d\n", tlvtype); /* Give up, this seems corrupted */ return; } /* switch */ tlvbufleft -= (sizeof(ptlv->header) + tlvlen); pcurrenttlv = (struct mrvlietypes_data *) (pcurrenttlv->Data + tlvlen); } /* while */ } /** * @brief Interpret a BSS scan response returned from the firmware * * Parse the various fixed fields and IEs passed back for a a BSS probe * response or beacon from the scan command. Record information as needed * in the scan table struct bss_descriptor for that entry. * * @param bss Output parameter: Pointer to the BSS Entry * * @return 0 or -1 */ static int libertas_process_bss(struct bss_descriptor * bss, u8 ** pbeaconinfo, int *bytesleft) { struct ieeetypes_fhparamset *pFH; struct ieeetypes_dsparamset *pDS; struct ieeetypes_cfparamset *pCF; struct ieeetypes_ibssparamset *pibss; u8 *pos, *end; u8 *pRate; u8 bytestocopy; u8 ratesize; u16 beaconsize; u8 founddatarateie; int ret; struct ieeetypes_countryinfoset *pcountryinfo; lbs_deb_enter(LBS_DEB_ASSOC); founddatarateie = 0; ratesize = 0; beaconsize = 0; if (*bytesleft >= sizeof(beaconsize)) { /* Extract & convert beacon size from the command buffer */ beaconsize = le16_to_cpup((void *)*pbeaconinfo); *bytesleft -= sizeof(beaconsize); *pbeaconinfo += sizeof(beaconsize); } if (beaconsize == 0 || beaconsize > *bytesleft) { *pbeaconinfo += *bytesleft; *bytesleft = 0; return -1; } /* Initialize the current working beacon pointer for this BSS iteration */ pos = *pbeaconinfo; end = pos + beaconsize; /* Advance the return beacon pointer past the current beacon */ *pbeaconinfo += beaconsize; *bytesleft -= beaconsize; memcpy(bss->bssid, pos, ETH_ALEN); lbs_deb_scan("process_bss: AP BSSID " MAC_FMT "\n", MAC_ARG(bss->bssid)); pos += ETH_ALEN; if ((end - pos) < 12) { lbs_deb_scan("process_bss: Not enough bytes left\n"); return -1; } /* * next 4 fields are RSSI, time stamp, beacon interval, * and capability information */ /* RSSI is 1 byte long */ bss->rssi = *pos; lbs_deb_scan("process_bss: RSSI=%02X\n", *pos); pos++; /* time stamp is 8 bytes long */ bss->timestamp = le64_to_cpup((void *) pos); pos += 8; /* beacon interval is 2 bytes long */ bss->beaconperiod = le16_to_cpup((void *) pos); pos += 2; /* capability information is 2 bytes long */ bss->capability = le16_to_cpup((void *) pos); lbs_deb_scan("process_bss: capabilities = 0x%4X\n", bss->capability); pos += 2; if (bss->capability & WLAN_CAPABILITY_PRIVACY) lbs_deb_scan("process_bss: AP WEP enabled\n"); if (bss->capability & WLAN_CAPABILITY_IBSS) bss->mode = IW_MODE_ADHOC; else bss->mode = IW_MODE_INFRA; /* rest of the current buffer are IE's */ lbs_deb_scan("process_bss: IE length for this AP = %zd\n", end - pos); lbs_dbg_hex("process_bss: IE info", pos, end - pos); /* process variable IE */ while (pos <= end - 2) { struct ieee80211_info_element * elem = (struct ieee80211_info_element *) pos; if (pos + elem->len > end) { lbs_deb_scan("process_bss: error in processing IE, " "bytes left < IE length\n"); break; } switch (elem->id) { case MFIE_TYPE_SSID: bss->ssid_len = elem->len; memcpy(bss->ssid, elem->data, elem->len); lbs_deb_scan("ssid '%s', ssid length %u\n", escape_essid(bss->ssid, bss->ssid_len), bss->ssid_len); break; case MFIE_TYPE_RATES: memcpy(bss->datarates, elem->data, elem->len); memmove(bss->libertas_supported_rates, elem->data, elem->len); ratesize = elem->len; founddatarateie = 1; break; case MFIE_TYPE_FH_SET: pFH = (struct ieeetypes_fhparamset *) pos; memmove(&bss->phyparamset.fhparamset, pFH, sizeof(struct ieeetypes_fhparamset)); #if 0 /* I think we can store these LE */ bss->phyparamset.fhparamset.dwelltime = le16_to_cpu(bss->phyparamset.fhparamset.dwelltime); #endif break; case MFIE_TYPE_DS_SET: pDS = (struct ieeetypes_dsparamset *) pos; bss->channel = pDS->currentchan; memcpy(&bss->phyparamset.dsparamset, pDS, sizeof(struct ieeetypes_dsparamset)); break; case MFIE_TYPE_CF_SET: pCF = (struct ieeetypes_cfparamset *) pos; memcpy(&bss->ssparamset.cfparamset, pCF, sizeof(struct ieeetypes_cfparamset)); break; case MFIE_TYPE_IBSS_SET: pibss = (struct ieeetypes_ibssparamset *) pos; bss->atimwindow = le32_to_cpu(pibss->atimwindow); memmove(&bss->ssparamset.ibssparamset, pibss, sizeof(struct ieeetypes_ibssparamset)); #if 0 bss->ssparamset.ibssparamset.atimwindow = le16_to_cpu(bss->ssparamset.ibssparamset.atimwindow); #endif break; case MFIE_TYPE_COUNTRY: pcountryinfo = (struct ieeetypes_countryinfoset *) pos; if (pcountryinfo->len < sizeof(pcountryinfo->countrycode) || pcountryinfo->len > 254) { lbs_deb_scan("process_bss: 11D- Err " "CountryInfo len =%d min=%zd max=254\n", pcountryinfo->len, sizeof(pcountryinfo->countrycode)); ret = -1; goto done; } memcpy(&bss->countryinfo, pcountryinfo, pcountryinfo->len + 2); lbs_dbg_hex("process_bss: 11D- CountryInfo:", (u8 *) pcountryinfo, (u32) (pcountryinfo->len + 2)); break; case MFIE_TYPE_RATES_EX: /* only process extended supported rate if data rate is * already found. Data rate IE should come before * extended supported rate IE */ if (!founddatarateie) break; if ((elem->len + ratesize) > WLAN_SUPPORTED_RATES) { bytestocopy = (WLAN_SUPPORTED_RATES - ratesize); } else { bytestocopy = elem->len; } pRate = (u8 *) bss->datarates; pRate += ratesize; memmove(pRate, elem->data, bytestocopy); pRate = (u8 *) bss->libertas_supported_rates; pRate += ratesize; memmove(pRate, elem->data, bytestocopy); break; case MFIE_TYPE_GENERIC: if (elem->len >= 4 && elem->data[0] == 0x00 && elem->data[1] == 0x50 && elem->data[2] == 0xf2 && elem->data[3] == 0x01) { bss->wpa_ie_len = min(elem->len + 2, MAX_WPA_IE_LEN); memcpy(bss->wpa_ie, elem, bss->wpa_ie_len); lbs_dbg_hex("process_bss: WPA IE", bss->wpa_ie, elem->len); } break; case MFIE_TYPE_RSN: bss->rsn_ie_len = min(elem->len + 2, MAX_WPA_IE_LEN); memcpy(bss->rsn_ie, elem, bss->rsn_ie_len); lbs_dbg_hex("process_bss: RSN_IE", bss->rsn_ie, elem->len); break; default: break; } pos += elem->len + 2; } /* Timestamp */ bss->last_scanned = jiffies; ret = 0; done: lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); return ret; } /** * @brief Compare two SSIDs * * @param ssid1 A pointer to ssid to compare * @param ssid2 A pointer to ssid to compare * * @return 0--ssid is same, otherwise is different */ int libertas_ssid_cmp(u8 *ssid1, u8 ssid1_len, u8 *ssid2, u8 ssid2_len) { if (ssid1_len != ssid2_len) return -1; return memcmp(ssid1, ssid2, ssid1_len); } /** * @brief This function finds a specific compatible BSSID in the scan list * * @param adapter A pointer to wlan_adapter * @param bssid BSSID to find in the scan list * @param mode Network mode: Infrastructure or IBSS * * @return index in BSSID list, or error return code (< 0) */ struct bss_descriptor * libertas_find_bssid_in_list(wlan_adapter * adapter, u8 * bssid, u8 mode) { struct bss_descriptor * iter_bss; struct bss_descriptor * found_bss = NULL; if (!bssid) return NULL; lbs_dbg_hex("libertas_find_BSSID_in_list: looking for ", bssid, ETH_ALEN); /* Look through the scan table for a compatible match. The loop will * continue past a matched bssid that is not compatible in case there * is an AP with multiple SSIDs assigned to the same BSSID */ mutex_lock(&adapter->lock); list_for_each_entry (iter_bss, &adapter->network_list, list) { if (compare_ether_addr(iter_bss->bssid, bssid)) continue; /* bssid doesn't match */ switch (mode) { case IW_MODE_INFRA: case IW_MODE_ADHOC: if (!is_network_compatible(adapter, iter_bss, mode)) break; found_bss = iter_bss; break; default: found_bss = iter_bss; break; } } mutex_unlock(&adapter->lock); return found_bss; } /** * @brief This function finds ssid in ssid list. * * @param adapter A pointer to wlan_adapter * @param ssid SSID to find in the list * @param bssid BSSID to qualify the SSID selection (if provided) * @param mode Network mode: Infrastructure or IBSS * * @return index in BSSID list */ struct bss_descriptor * libertas_find_ssid_in_list(wlan_adapter * adapter, u8 *ssid, u8 ssid_len, u8 * bssid, u8 mode, int channel) { u8 bestrssi = 0; struct bss_descriptor * iter_bss = NULL; struct bss_descriptor * found_bss = NULL; struct bss_descriptor * tmp_oldest = NULL; mutex_lock(&adapter->lock); list_for_each_entry (iter_bss, &adapter->network_list, list) { if ( !tmp_oldest || (iter_bss->last_scanned < tmp_oldest->last_scanned)) tmp_oldest = iter_bss; if (libertas_ssid_cmp(iter_bss->ssid, iter_bss->ssid_len, ssid, ssid_len) != 0) continue; /* ssid doesn't match */ if (bssid && compare_ether_addr(iter_bss->bssid, bssid) != 0) continue; /* bssid doesn't match */ if ((channel > 0) && (iter_bss->channel != channel)) continue; /* channel doesn't match */ switch (mode) { case IW_MODE_INFRA: case IW_MODE_ADHOC: if (!is_network_compatible(adapter, iter_bss, mode)) break; if (bssid) { /* Found requested BSSID */ found_bss = iter_bss; goto out; } if (SCAN_RSSI(iter_bss->rssi) > bestrssi) { bestrssi = SCAN_RSSI(iter_bss->rssi); found_bss = iter_bss; } break; case IW_MODE_AUTO: default: if (SCAN_RSSI(iter_bss->rssi) > bestrssi) { bestrssi = SCAN_RSSI(iter_bss->rssi); found_bss = iter_bss; } break; } } out: mutex_unlock(&adapter->lock); return found_bss; } /** * @brief This function finds the best SSID in the Scan List * * Search the scan table for the best SSID that also matches the current * adapter network preference (infrastructure or adhoc) * * @param adapter A pointer to wlan_adapter * * @return index in BSSID list */ struct bss_descriptor * libertas_find_best_ssid_in_list(wlan_adapter * adapter, u8 mode) { u8 bestrssi = 0; struct bss_descriptor * iter_bss; struct bss_descriptor * best_bss = NULL; mutex_lock(&adapter->lock); list_for_each_entry (iter_bss, &adapter->network_list, list) { switch (mode) { case IW_MODE_INFRA: case IW_MODE_ADHOC: if (!is_network_compatible(adapter, iter_bss, mode)) break; if (SCAN_RSSI(iter_bss->rssi) <= bestrssi) break; bestrssi = SCAN_RSSI(iter_bss->rssi); best_bss = iter_bss; break; case IW_MODE_AUTO: default: if (SCAN_RSSI(iter_bss->rssi) <= bestrssi) break; bestrssi = SCAN_RSSI(iter_bss->rssi); best_bss = iter_bss; break; } } mutex_unlock(&adapter->lock); return best_bss; } /** * @brief Find the AP with specific ssid in the scan list * * @param priv A pointer to wlan_private structure * @param pSSID A pointer to AP's ssid * * @return 0--success, otherwise--fail */ int libertas_find_best_network_ssid(wlan_private * priv, u8 *out_ssid, u8 *out_ssid_len, u8 preferred_mode, u8 *out_mode) { wlan_adapter *adapter = priv->adapter; int ret = -1; struct bss_descriptor * found; lbs_deb_enter(LBS_DEB_ASSOC); wlan_scan_networks(priv, NULL, 1); if (adapter->surpriseremoved) return -1; wait_event_interruptible(adapter->cmd_pending, !adapter->nr_cmd_pending); found = libertas_find_best_ssid_in_list(adapter, preferred_mode); if (found && (found->ssid_len > 0)) { memcpy(out_ssid, &found->ssid, IW_ESSID_MAX_SIZE); *out_ssid_len = found->ssid_len; *out_mode = found->mode; ret = 0; } lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); return ret; } /** * @brief Scan Network * * @param dev A pointer to net_device structure * @param info A pointer to iw_request_info structure * @param vwrq A pointer to iw_param structure * @param extra A pointer to extra data buf * * @return 0 --success, otherwise fail */ int libertas_set_scan(struct net_device *dev, struct iw_request_info *info, struct iw_param *vwrq, char *extra) { wlan_private *priv = dev->priv; wlan_adapter *adapter = priv->adapter; lbs_deb_enter(LBS_DEB_SCAN); wlan_scan_networks(priv, NULL, 0); if (adapter->surpriseremoved) return -1; lbs_deb_leave(LBS_DEB_SCAN); return 0; } /** * @brief Send a scan command for all available channels filtered on a spec * * @param priv A pointer to wlan_private structure * @param prequestedssid A pointer to AP's ssid * @param keeppreviousscan Flag used to save/clear scan table before scan * * @return 0-success, otherwise fail */ int libertas_send_specific_ssid_scan(wlan_private * priv, u8 *ssid, u8 ssid_len, u8 clear_ssid) { wlan_adapter *adapter = priv->adapter; struct wlan_ioctl_user_scan_cfg scancfg; int ret = 0; lbs_deb_enter(LBS_DEB_ASSOC); if (!ssid_len) goto out; memset(&scancfg, 0x00, sizeof(scancfg)); memcpy(scancfg.ssid, ssid, ssid_len); scancfg.ssid_len = ssid_len; scancfg.clear_ssid = clear_ssid; wlan_scan_networks(priv, &scancfg, 1); if (adapter->surpriseremoved) return -1; wait_event_interruptible(adapter->cmd_pending, !adapter->nr_cmd_pending); out: lbs_deb_leave(LBS_DEB_ASSOC); return ret; } /** * @brief scan an AP with specific BSSID * * @param priv A pointer to wlan_private structure * @param bssid A pointer to AP's bssid * @param keeppreviousscan Flag used to save/clear scan table before scan * * @return 0-success, otherwise fail */ int libertas_send_specific_bssid_scan(wlan_private * priv, u8 * bssid, u8 clear_bssid) { struct wlan_ioctl_user_scan_cfg scancfg; lbs_deb_enter(LBS_DEB_ASSOC); if (bssid == NULL) goto out; memset(&scancfg, 0x00, sizeof(scancfg)); memcpy(scancfg.bssid, bssid, ETH_ALEN); scancfg.clear_bssid = clear_bssid; wlan_scan_networks(priv, &scancfg, 1); if (priv->adapter->surpriseremoved) return -1; wait_event_interruptible(priv->adapter->cmd_pending, !priv->adapter->nr_cmd_pending); out: lbs_deb_leave(LBS_DEB_ASSOC); return 0; } static inline char *libertas_translate_scan(wlan_private *priv, char *start, char *stop, struct bss_descriptor *bss) { wlan_adapter *adapter = priv->adapter; struct chan_freq_power *cfp; char *current_val; /* For rates */ struct iw_event iwe; /* Temporary buffer */ int j; #define PERFECT_RSSI ((u8)50) #define WORST_RSSI ((u8)0) #define RSSI_DIFF ((u8)(PERFECT_RSSI - WORST_RSSI)) u8 rssi; cfp = libertas_find_cfp_by_band_and_channel(adapter, 0, bss->channel); if (!cfp) { lbs_deb_scan("Invalid channel number %d\n", bss->channel); return NULL; } /* First entry *MUST* be the AP BSSID */ iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, &bss->bssid, ETH_ALEN); start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN); /* SSID */ iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; iwe.u.data.length = min((u32) bss->ssid_len, (u32) IW_ESSID_MAX_SIZE); start = iwe_stream_add_point(start, stop, &iwe, bss->ssid); /* Mode */ iwe.cmd = SIOCGIWMODE; iwe.u.mode = bss->mode; start = iwe_stream_add_event(start, stop, &iwe, IW_EV_UINT_LEN); /* Frequency */ iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = (long)cfp->freq * 100000; iwe.u.freq.e = 1; start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN); /* Add quality statistics */ iwe.cmd = IWEVQUAL; iwe.u.qual.updated = IW_QUAL_ALL_UPDATED; iwe.u.qual.level = SCAN_RSSI(bss->rssi); rssi = iwe.u.qual.level - MRVDRV_NF_DEFAULT_SCAN_VALUE; iwe.u.qual.qual = (100 * RSSI_DIFF * RSSI_DIFF - (PERFECT_RSSI - rssi) * (15 * (RSSI_DIFF) + 62 * (PERFECT_RSSI - rssi))) / (RSSI_DIFF * RSSI_DIFF); if (iwe.u.qual.qual > 100) iwe.u.qual.qual = 100; if (adapter->NF[TYPE_BEACON][TYPE_NOAVG] == 0) { iwe.u.qual.noise = MRVDRV_NF_DEFAULT_SCAN_VALUE; } else { iwe.u.qual.noise = CAL_NF(adapter->NF[TYPE_BEACON][TYPE_NOAVG]); } /* Locally created ad-hoc BSSs won't have beacons if this is the * only station in the adhoc network; so get signal strength * from receive statistics. */ if ((adapter->mode == IW_MODE_ADHOC) && adapter->adhoccreate && !libertas_ssid_cmp(adapter->curbssparams.ssid, adapter->curbssparams.ssid_len, bss->ssid, bss->ssid_len)) { int snr, nf; snr = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; nf = adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE; iwe.u.qual.level = CAL_RSSI(snr, nf); } start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ iwe.cmd = SIOCGIWENCODE; if (bss->capability & WLAN_CAPABILITY_PRIVACY) { iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; } else { iwe.u.data.flags = IW_ENCODE_DISABLED; } iwe.u.data.length = 0; start = iwe_stream_add_point(start, stop, &iwe, bss->ssid); current_val = start + IW_EV_LCP_LEN; iwe.cmd = SIOCGIWRATE; iwe.u.bitrate.fixed = 0; iwe.u.bitrate.disabled = 0; iwe.u.bitrate.value = 0; for (j = 0; j < sizeof(bss->libertas_supported_rates); j++) { u8 rate = bss->libertas_supported_rates[j]; if (rate == 0) break; /* no more rates */ /* Bit rate given in 500 kb/s units (+ 0x80) */ iwe.u.bitrate.value = (rate & 0x7f) * 500000; current_val = iwe_stream_add_value(start, current_val, stop, &iwe, IW_EV_PARAM_LEN); } if ((bss->mode == IW_MODE_ADHOC) && !libertas_ssid_cmp(adapter->curbssparams.ssid, adapter->curbssparams.ssid_len, bss->ssid, bss->ssid_len) && adapter->adhoccreate) { iwe.u.bitrate.value = 22 * 500000; current_val = iwe_stream_add_value(start, current_val, stop, &iwe, IW_EV_PARAM_LEN); } /* Check if we added any event */ if((current_val - start) > IW_EV_LCP_LEN) start = current_val; memset(&iwe, 0, sizeof(iwe)); if (bss->wpa_ie_len) { char buf[MAX_WPA_IE_LEN]; memcpy(buf, bss->wpa_ie, bss->wpa_ie_len); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->wpa_ie_len; start = iwe_stream_add_point(start, stop, &iwe, buf); } memset(&iwe, 0, sizeof(iwe)); if (bss->rsn_ie_len) { char buf[MAX_WPA_IE_LEN]; memcpy(buf, bss->rsn_ie, bss->rsn_ie_len); iwe.cmd = IWEVGENIE; iwe.u.data.length = bss->rsn_ie_len; start = iwe_stream_add_point(start, stop, &iwe, buf); } return start; } /** * @brief Retrieve the scan table entries via wireless tools IOCTL call * * @param dev A pointer to net_device structure * @param info A pointer to iw_request_info structure * @param dwrq A pointer to iw_point structure * @param extra A pointer to extra data buf * * @return 0 --success, otherwise fail */ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info, struct iw_point *dwrq, char *extra) { #define SCAN_ITEM_SIZE 128 wlan_private *priv = dev->priv; wlan_adapter *adapter = priv->adapter; int err = 0; char *ev = extra; char *stop = ev + dwrq->length; struct bss_descriptor * iter_bss; struct bss_descriptor * safe; lbs_deb_enter(LBS_DEB_ASSOC); /* If we've got an uncompleted scan, schedule the next part */ if (!adapter->nr_cmd_pending && adapter->last_scanned_channel) wlan_scan_networks(priv, NULL, 0); /* Update RSSI if current BSS is a locally created ad-hoc BSS */ if ((adapter->mode == IW_MODE_ADHOC) && adapter->adhoccreate) { libertas_prepare_and_send_command(priv, cmd_802_11_rssi, 0, cmd_option_waitforrsp, 0, NULL); } mutex_lock(&adapter->lock); list_for_each_entry_safe (iter_bss, safe, &adapter->network_list, list) { char * next_ev; unsigned long stale_time; if (stop - ev < SCAN_ITEM_SIZE) { err = -E2BIG; break; } /* Prune old an old scan result */ stale_time = iter_bss->last_scanned + DEFAULT_MAX_SCAN_AGE; if (time_after(jiffies, stale_time)) { list_move_tail (&iter_bss->list, &adapter->network_free_list); clear_bss_descriptor(iter_bss); continue; } /* Translate to WE format this entry */ next_ev = libertas_translate_scan(priv, ev, stop, iter_bss); if (next_ev == NULL) continue; ev = next_ev; } mutex_unlock(&adapter->lock); dwrq->length = (ev - extra); dwrq->flags = 0; lbs_deb_leave(LBS_DEB_ASSOC); return err; } /** * @brief Prepare a scan command to be sent to the firmware * * Use the wlan_scan_cmd_config sent to the command processing module in * the libertas_prepare_and_send_command to configure a cmd_ds_802_11_scan command * struct to send to firmware. * * The fixed fields specifying the BSS type and BSSID filters as well as a * variable number/length of TLVs are sent in the command to firmware. * * @param priv A pointer to wlan_private structure * @param cmd A pointer to cmd_ds_command structure to be sent to * firmware with the cmd_DS_801_11_SCAN structure * @param pdata_buf Void pointer cast of a wlan_scan_cmd_config struct used * to set the fields/TLVs for the command sent to firmware * * @return 0 or -1 * * @sa wlan_scan_create_channel_list */ int libertas_cmd_80211_scan(wlan_private * priv, struct cmd_ds_command *cmd, void *pdata_buf) { struct cmd_ds_802_11_scan *pscan = &cmd->params.scan; struct wlan_scan_cmd_config *pscancfg; lbs_deb_enter(LBS_DEB_ASSOC); pscancfg = pdata_buf; /* Set fixed field variables in scan command */ pscan->bsstype = pscancfg->bsstype; memcpy(pscan->BSSID, pscancfg->bssid, sizeof(pscan->BSSID)); memcpy(pscan->tlvbuffer, pscancfg->tlvbuffer, pscancfg->tlvbufferlen); cmd->command = cpu_to_le16(cmd_802_11_scan); /* size is equal to the sizeof(fixed portions) + the TLV len + header */ cmd->size = cpu_to_le16(sizeof(pscan->bsstype) + sizeof(pscan->BSSID) + pscancfg->tlvbufferlen + S_DS_GEN); lbs_deb_scan("SCAN_CMD: command=%x, size=%x, seqnum=%x\n", le16_to_cpu(cmd->command), le16_to_cpu(cmd->size), le16_to_cpu(cmd->seqnum)); lbs_deb_leave(LBS_DEB_ASSOC); return 0; } static inline int is_same_network(struct bss_descriptor *src, struct bss_descriptor *dst) { /* A network is only a duplicate if the channel, BSSID, and ESSID * all match. We treat all with the same BSSID and channel * as one network */ return ((src->ssid_len == dst->ssid_len) && (src->channel == dst->channel) && !compare_ether_addr(src->bssid, dst->bssid) && !memcmp(src->ssid, dst->ssid, src->ssid_len)); } /** * @brief This function handles the command response of scan * * The response buffer for the scan command has the following * memory layout: * * .-----------------------------------------------------------. * | header (4 * sizeof(u16)): Standard command response hdr | * .-----------------------------------------------------------. * | bufsize (u16) : sizeof the BSS Description data | * .-----------------------------------------------------------. * | NumOfSet (u8) : Number of BSS Descs returned | * .-----------------------------------------------------------. * | BSSDescription data (variable, size given in bufsize) | * .-----------------------------------------------------------. * | TLV data (variable, size calculated using header->size, | * | bufsize and sizeof the fixed fields above) | * .-----------------------------------------------------------. * * @param priv A pointer to wlan_private structure * @param resp A pointer to cmd_ds_command * * @return 0 or -1 */ int libertas_ret_80211_scan(wlan_private * priv, struct cmd_ds_command *resp) { wlan_adapter *adapter = priv->adapter; struct cmd_ds_802_11_scan_rsp *pscan; struct mrvlietypes_data *ptlv; struct mrvlietypes_tsftimestamp *ptsftlv; struct bss_descriptor * iter_bss; struct bss_descriptor * safe; u8 *pbssinfo; u16 scanrespsize; int bytesleft; int idx; int tlvbufsize; int ret; lbs_deb_enter(LBS_DEB_ASSOC); /* Prune old entries from scan table */ list_for_each_entry_safe (iter_bss, safe, &adapter->network_list, list) { unsigned long stale_time = iter_bss->last_scanned + DEFAULT_MAX_SCAN_AGE; if (time_before(jiffies, stale_time)) continue; list_move_tail (&iter_bss->list, &adapter->network_free_list); clear_bss_descriptor(iter_bss); } pscan = &resp->params.scanresp; if (pscan->nr_sets > MAX_NETWORK_COUNT) { lbs_deb_scan( "SCAN_RESP: too many scan results (%d, max %d)!!\n", pscan->nr_sets, MAX_NETWORK_COUNT); ret = -1; goto done; } bytesleft = le16_to_cpu(pscan->bssdescriptsize); lbs_deb_scan("SCAN_RESP: bssdescriptsize %d\n", bytesleft); scanrespsize = le16_to_cpu(resp->size); lbs_deb_scan("SCAN_RESP: returned %d AP before parsing\n", pscan->nr_sets); pbssinfo = pscan->bssdesc_and_tlvbuffer; /* The size of the TLV buffer is equal to the entire command response * size (scanrespsize) minus the fixed fields (sizeof()'s), the * BSS Descriptions (bssdescriptsize as bytesLef) and the command * response header (S_DS_GEN) */ tlvbufsize = scanrespsize - (bytesleft + sizeof(pscan->bssdescriptsize) + sizeof(pscan->nr_sets) + S_DS_GEN); ptlv = (struct mrvlietypes_data *) (pscan->bssdesc_and_tlvbuffer + bytesleft); /* Search the TLV buffer space in the scan response for any valid TLVs */ wlan_ret_802_11_scan_get_tlv_ptrs(ptlv, tlvbufsize, &ptsftlv); /* * Process each scan response returned (pscan->nr_sets). Save * the information in the newbssentry and then insert into the * driver scan table either as an update to an existing entry * or as an addition at the end of the table */ for (idx = 0; idx < pscan->nr_sets && bytesleft; idx++) { struct bss_descriptor new; struct bss_descriptor * found = NULL; struct bss_descriptor * oldest = NULL; /* Process the data fields and IEs returned for this BSS */ memset(&new, 0, sizeof (struct bss_descriptor)); if (libertas_process_bss(&new, &pbssinfo, &bytesleft) != 0) { /* error parsing the scan response, skipped */ lbs_deb_scan("SCAN_RESP: process_bss returned ERROR\n"); continue; } /* Try to find this bss in the scan table */ list_for_each_entry (iter_bss, &adapter->network_list, list) { if (is_same_network(iter_bss, &new)) { found = iter_bss; break; } if ((oldest == NULL) || (iter_bss->last_scanned < oldest->last_scanned)) oldest = iter_bss; } if (found) { /* found, clear it */ clear_bss_descriptor(found); } else if (!list_empty(&adapter->network_free_list)) { /* Pull one from the free list */ found = list_entry(adapter->network_free_list.next, struct bss_descriptor, list); list_move_tail(&found->list, &adapter->network_list); } else if (oldest) { /* If there are no more slots, expire the oldest */ found = oldest; clear_bss_descriptor(found); list_move_tail(&found->list, &adapter->network_list); } else { continue; } lbs_deb_scan("SCAN_RESP: BSSID = " MAC_FMT "\n", new.bssid[0], new.bssid[1], new.bssid[2], new.bssid[3], new.bssid[4], new.bssid[5]); /* * If the TSF TLV was appended to the scan results, save the * this entries TSF value in the networktsf field. The * networktsf is the firmware's TSF value at the time the * beacon or probe response was received. */ if (ptsftlv) { new.networktsf = le64_to_cpup(&ptsftlv->tsftable[idx]); } /* Copy the locally created newbssentry to the scan table */ memcpy(found, &new, offsetof(struct bss_descriptor, list)); } ret = 0; done: lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); return ret; }