/* * QLogic Fibre Channel HBA Driver * Copyright (c) 2003-2005 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ #include "qla_def.h" #include #include static void qla2x00_mbx_completion(scsi_qla_host_t *, uint16_t); static void qla2x00_process_completed_request(struct scsi_qla_host *, uint32_t); static void qla2x00_status_entry(scsi_qla_host_t *, void *); static void qla2x00_status_cont_entry(scsi_qla_host_t *, sts_cont_entry_t *); static void qla2x00_error_entry(scsi_qla_host_t *, sts_entry_t *); static void qla2x00_ms_entry(scsi_qla_host_t *, ms_iocb_entry_t *); static void qla24xx_ms_entry(scsi_qla_host_t *, struct ct_entry_24xx *); /** * qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200. * @irq: * @dev_id: SCSI driver HA context * * Called by system whenever the host adapter generates an interrupt. * * Returns handled flag. */ irqreturn_t qla2100_intr_handler(int irq, void *dev_id) { scsi_qla_host_t *ha; struct device_reg_2xxx __iomem *reg; int status; unsigned long flags; unsigned long iter; uint16_t hccr; uint16_t mb[4]; ha = (scsi_qla_host_t *) dev_id; if (!ha) { printk(KERN_INFO "%s(): NULL host pointer\n", __func__); return (IRQ_NONE); } reg = &ha->iobase->isp; status = 0; spin_lock_irqsave(&ha->hardware_lock, flags); for (iter = 50; iter--; ) { hccr = RD_REG_WORD(®->hccr); if (hccr & HCCR_RISC_PAUSE) { if (pci_channel_offline(ha->pdev)) break; /* * Issue a "HARD" reset in order for the RISC interrupt * bit to be cleared. Schedule a big hammmer to get * out of the RISC PAUSED state. */ WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); RD_REG_WORD(®->hccr); ha->isp_ops->fw_dump(ha, 1); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; } else if ((RD_REG_WORD(®->istatus) & ISR_RISC_INT) == 0) break; if (RD_REG_WORD(®->semaphore) & BIT_0) { WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT); RD_REG_WORD(®->hccr); /* Get mailbox data. */ mb[0] = RD_MAILBOX_REG(ha, reg, 0); if (mb[0] > 0x3fff && mb[0] < 0x8000) { qla2x00_mbx_completion(ha, mb[0]); status |= MBX_INTERRUPT; } else if (mb[0] > 0x7fff && mb[0] < 0xc000) { mb[1] = RD_MAILBOX_REG(ha, reg, 1); mb[2] = RD_MAILBOX_REG(ha, reg, 2); mb[3] = RD_MAILBOX_REG(ha, reg, 3); qla2x00_async_event(ha, mb); } else { /*EMPTY*/ DEBUG2(printk("scsi(%ld): Unrecognized " "interrupt type (%d).\n", ha->host_no, mb[0])); } /* Release mailbox registers. */ WRT_REG_WORD(®->semaphore, 0); RD_REG_WORD(®->semaphore); } else { qla2x00_process_response_queue(ha); WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT); RD_REG_WORD(®->hccr); } } spin_unlock_irqrestore(&ha->hardware_lock, flags); if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); up(&ha->mbx_intr_sem); } return (IRQ_HANDLED); } /** * qla2300_intr_handler() - Process interrupts for the ISP23xx and ISP63xx. * @irq: * @dev_id: SCSI driver HA context * * Called by system whenever the host adapter generates an interrupt. * * Returns handled flag. */ irqreturn_t qla2300_intr_handler(int irq, void *dev_id) { scsi_qla_host_t *ha; struct device_reg_2xxx __iomem *reg; int status; unsigned long flags; unsigned long iter; uint32_t stat; uint16_t hccr; uint16_t mb[4]; ha = (scsi_qla_host_t *) dev_id; if (!ha) { printk(KERN_INFO "%s(): NULL host pointer\n", __func__); return (IRQ_NONE); } reg = &ha->iobase->isp; status = 0; spin_lock_irqsave(&ha->hardware_lock, flags); for (iter = 50; iter--; ) { stat = RD_REG_DWORD(®->u.isp2300.host_status); if (stat & HSR_RISC_PAUSED) { if (pci_channel_offline(ha->pdev)) break; hccr = RD_REG_WORD(®->hccr); if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8)) qla_printk(KERN_INFO, ha, "Parity error -- " "HCCR=%x, Dumping firmware!\n", hccr); else qla_printk(KERN_INFO, ha, "RISC paused -- " "HCCR=%x, Dumping firmware!\n", hccr); /* * Issue a "HARD" reset in order for the RISC * interrupt bit to be cleared. Schedule a big * hammmer to get out of the RISC PAUSED state. */ WRT_REG_WORD(®->hccr, HCCR_RESET_RISC); RD_REG_WORD(®->hccr); ha->isp_ops->fw_dump(ha, 1); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; } else if ((stat & HSR_RISC_INT) == 0) break; switch (stat & 0xff) { case 0x1: case 0x2: case 0x10: case 0x11: qla2x00_mbx_completion(ha, MSW(stat)); status |= MBX_INTERRUPT; /* Release mailbox registers. */ WRT_REG_WORD(®->semaphore, 0); break; case 0x12: mb[0] = MSW(stat); mb[1] = RD_MAILBOX_REG(ha, reg, 1); mb[2] = RD_MAILBOX_REG(ha, reg, 2); mb[3] = RD_MAILBOX_REG(ha, reg, 3); qla2x00_async_event(ha, mb); break; case 0x13: qla2x00_process_response_queue(ha); break; case 0x15: mb[0] = MBA_CMPLT_1_16BIT; mb[1] = MSW(stat); qla2x00_async_event(ha, mb); break; case 0x16: mb[0] = MBA_SCSI_COMPLETION; mb[1] = MSW(stat); mb[2] = RD_MAILBOX_REG(ha, reg, 2); qla2x00_async_event(ha, mb); break; default: DEBUG2(printk("scsi(%ld): Unrecognized interrupt type " "(%d).\n", ha->host_no, stat & 0xff)); break; } WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT); RD_REG_WORD_RELAXED(®->hccr); } spin_unlock_irqrestore(&ha->hardware_lock, flags); if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); up(&ha->mbx_intr_sem); } return (IRQ_HANDLED); } /** * qla2x00_mbx_completion() - Process mailbox command completions. * @ha: SCSI driver HA context * @mb0: Mailbox0 register */ static void qla2x00_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0) { uint16_t cnt; uint16_t __iomem *wptr; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; /* Load return mailbox registers. */ ha->flags.mbox_int = 1; ha->mailbox_out[0] = mb0; wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 1); for (cnt = 1; cnt < ha->mbx_count; cnt++) { if (IS_QLA2200(ha) && cnt == 8) wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 8); if (cnt == 4 || cnt == 5) ha->mailbox_out[cnt] = qla2x00_debounce_register(wptr); else ha->mailbox_out[cnt] = RD_REG_WORD(wptr); wptr++; } if (ha->mcp) { DEBUG3(printk("%s(%ld): Got mailbox completion. cmd=%x.\n", __func__, ha->host_no, ha->mcp->mb[0])); } else { DEBUG2_3(printk("%s(%ld): MBX pointer ERROR!\n", __func__, ha->host_no)); } } /** * qla2x00_async_event() - Process aynchronous events. * @ha: SCSI driver HA context * @mb: Mailbox registers (0 - 3) */ void qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) { #define LS_UNKNOWN 2 static char *link_speeds[5] = { "1", "2", "?", "4", "8" }; char *link_speed; uint16_t handle_cnt; uint16_t cnt; uint32_t handles[5]; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; uint32_t rscn_entry, host_pid; uint8_t rscn_queue_index; /* Setup to process RIO completion. */ handle_cnt = 0; switch (mb[0]) { case MBA_SCSI_COMPLETION: handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1])); handle_cnt = 1; break; case MBA_CMPLT_1_16BIT: handles[0] = mb[1]; handle_cnt = 1; mb[0] = MBA_SCSI_COMPLETION; break; case MBA_CMPLT_2_16BIT: handles[0] = mb[1]; handles[1] = mb[2]; handle_cnt = 2; mb[0] = MBA_SCSI_COMPLETION; break; case MBA_CMPLT_3_16BIT: handles[0] = mb[1]; handles[1] = mb[2]; handles[2] = mb[3]; handle_cnt = 3; mb[0] = MBA_SCSI_COMPLETION; break; case MBA_CMPLT_4_16BIT: handles[0] = mb[1]; handles[1] = mb[2]; handles[2] = mb[3]; handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6); handle_cnt = 4; mb[0] = MBA_SCSI_COMPLETION; break; case MBA_CMPLT_5_16BIT: handles[0] = mb[1]; handles[1] = mb[2]; handles[2] = mb[3]; handles[3] = (uint32_t)RD_MAILBOX_REG(ha, reg, 6); handles[4] = (uint32_t)RD_MAILBOX_REG(ha, reg, 7); handle_cnt = 5; mb[0] = MBA_SCSI_COMPLETION; break; case MBA_CMPLT_2_32BIT: handles[0] = le32_to_cpu((uint32_t)((mb[2] << 16) | mb[1])); handles[1] = le32_to_cpu( ((uint32_t)(RD_MAILBOX_REG(ha, reg, 7) << 16)) | RD_MAILBOX_REG(ha, reg, 6)); handle_cnt = 2; mb[0] = MBA_SCSI_COMPLETION; break; default: break; } switch (mb[0]) { case MBA_SCSI_COMPLETION: /* Fast Post */ if (!ha->flags.online) break; for (cnt = 0; cnt < handle_cnt; cnt++) qla2x00_process_completed_request(ha, handles[cnt]); break; case MBA_RESET: /* Reset */ DEBUG2(printk("scsi(%ld): Asynchronous RESET.\n", ha->host_no)); set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); break; case MBA_SYSTEM_ERR: /* System Error */ qla_printk(KERN_INFO, ha, "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n", mb[1], mb[2], mb[3]); ha->isp_ops->fw_dump(ha, 1); if (IS_FWI2_CAPABLE(ha)) { if (mb[1] == 0 && mb[2] == 0) { qla_printk(KERN_ERR, ha, "Unrecoverable Hardware Error: adapter " "marked OFFLINE!\n"); ha->flags.online = 0; } else set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); } else if (mb[1] == 0) { qla_printk(KERN_INFO, ha, "Unrecoverable Hardware Error: adapter marked " "OFFLINE!\n"); ha->flags.online = 0; } else set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */ DEBUG2(printk("scsi(%ld): ISP Request Transfer Error.\n", ha->host_no)); qla_printk(KERN_WARNING, ha, "ISP Request Transfer Error.\n"); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */ DEBUG2(printk("scsi(%ld): ISP Response Transfer Error.\n", ha->host_no)); qla_printk(KERN_WARNING, ha, "ISP Response Transfer Error.\n"); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; case MBA_WAKEUP_THRES: /* Request Queue Wake-up */ DEBUG2(printk("scsi(%ld): Asynchronous WAKEUP_THRES.\n", ha->host_no)); break; case MBA_LIP_OCCURRED: /* Loop Initialization Procedure */ DEBUG2(printk("scsi(%ld): LIP occured (%x).\n", ha->host_no, mb[1])); qla_printk(KERN_INFO, ha, "LIP occured (%x).\n", mb[1]); if (atomic_read(&ha->loop_state) != LOOP_DOWN) { atomic_set(&ha->loop_state, LOOP_DOWN); atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); qla2x00_mark_all_devices_lost(ha, 1); } if (ha->parent) { atomic_set(&ha->vp_state, VP_FAILED); fc_vport_set_state(ha->fc_vport, FC_VPORT_FAILED); } set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags); ha->flags.management_server_logged_in = 0; break; case MBA_LOOP_UP: /* Loop Up Event */ if (IS_QLA2100(ha) || IS_QLA2200(ha)) { link_speed = link_speeds[0]; ha->link_data_rate = PORT_SPEED_1GB; } else { link_speed = link_speeds[LS_UNKNOWN]; if (mb[1] < 5) link_speed = link_speeds[mb[1]]; ha->link_data_rate = mb[1]; } DEBUG2(printk("scsi(%ld): Asynchronous LOOP UP (%s Gbps).\n", ha->host_no, link_speed)); qla_printk(KERN_INFO, ha, "LOOP UP detected (%s Gbps).\n", link_speed); ha->flags.management_server_logged_in = 0; break; case MBA_LOOP_DOWN: /* Loop Down Event */ DEBUG2(printk("scsi(%ld): Asynchronous LOOP DOWN (%x).\n", ha->host_no, mb[1])); qla_printk(KERN_INFO, ha, "LOOP DOWN detected (%x).\n", mb[1]); if (atomic_read(&ha->loop_state) != LOOP_DOWN) { atomic_set(&ha->loop_state, LOOP_DOWN); atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); ha->device_flags |= DFLG_NO_CABLE; qla2x00_mark_all_devices_lost(ha, 1); } if (ha->parent) { atomic_set(&ha->vp_state, VP_FAILED); fc_vport_set_state(ha->fc_vport, FC_VPORT_FAILED); } ha->flags.management_server_logged_in = 0; ha->link_data_rate = PORT_SPEED_UNKNOWN; if (ql2xfdmienable) set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags); break; case MBA_LIP_RESET: /* LIP reset occurred */ DEBUG2(printk("scsi(%ld): Asynchronous LIP RESET (%x).\n", ha->host_no, mb[1])); qla_printk(KERN_INFO, ha, "LIP reset occured (%x).\n", mb[1]); if (atomic_read(&ha->loop_state) != LOOP_DOWN) { atomic_set(&ha->loop_state, LOOP_DOWN); atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); qla2x00_mark_all_devices_lost(ha, 1); } if (ha->parent) { atomic_set(&ha->vp_state, VP_FAILED); fc_vport_set_state(ha->fc_vport, FC_VPORT_FAILED); } set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); ha->operating_mode = LOOP; ha->flags.management_server_logged_in = 0; break; case MBA_POINT_TO_POINT: /* Point-to-Point */ if (IS_QLA2100(ha)) break; DEBUG2(printk("scsi(%ld): Asynchronous P2P MODE received.\n", ha->host_no)); /* * Until there's a transition from loop down to loop up, treat * this as loop down only. */ if (atomic_read(&ha->loop_state) != LOOP_DOWN) { atomic_set(&ha->loop_state, LOOP_DOWN); if (!atomic_read(&ha->loop_down_timer)) atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); qla2x00_mark_all_devices_lost(ha, 1); } if (ha->parent) { atomic_set(&ha->vp_state, VP_FAILED); fc_vport_set_state(ha->fc_vport, FC_VPORT_FAILED); } if (!(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) { set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); } set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags); ha->flags.gpsc_supported = 1; ha->flags.management_server_logged_in = 0; break; case MBA_CHG_IN_CONNECTION: /* Change in connection mode */ if (IS_QLA2100(ha)) break; DEBUG2(printk("scsi(%ld): Asynchronous Change In Connection " "received.\n", ha->host_no)); qla_printk(KERN_INFO, ha, "Configuration change detected: value=%x.\n", mb[1]); if (atomic_read(&ha->loop_state) != LOOP_DOWN) { atomic_set(&ha->loop_state, LOOP_DOWN); if (!atomic_read(&ha->loop_down_timer)) atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); qla2x00_mark_all_devices_lost(ha, 1); } if (ha->parent) { atomic_set(&ha->vp_state, VP_FAILED); fc_vport_set_state(ha->fc_vport, FC_VPORT_FAILED); } set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags); break; case MBA_PORT_UPDATE: /* Port database update */ /* * If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET * event etc. earlier indicating loop is down) then process * it. Otherwise ignore it and Wait for RSCN to come in. */ atomic_set(&ha->loop_down_timer, 0); if (atomic_read(&ha->loop_state) != LOOP_DOWN && atomic_read(&ha->loop_state) != LOOP_DEAD) { DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE " "ignored %04x/%04x/%04x.\n", ha->host_no, mb[1], mb[2], mb[3])); break; } DEBUG2(printk("scsi(%ld): Asynchronous PORT UPDATE.\n", ha->host_no)); DEBUG(printk(KERN_INFO "scsi(%ld): Port database changed %04x %04x %04x.\n", ha->host_no, mb[1], mb[2], mb[3])); /* * Mark all devices as missing so we will login again. */ atomic_set(&ha->loop_state, LOOP_UP); qla2x00_mark_all_devices_lost(ha, 1); ha->flags.rscn_queue_overflow = 1; set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags); break; case MBA_RSCN_UPDATE: /* State Change Registration */ /* Check if the Vport has issued a SCR */ if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags)) break; /* Only handle SCNs for our Vport index. */ if (ha->flags.npiv_supported && ha->vp_idx != mb[3]) break; DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n", ha->host_no)); DEBUG(printk(KERN_INFO "scsi(%ld): RSCN database changed -- %04x %04x %04x.\n", ha->host_no, mb[1], mb[2], mb[3])); rscn_entry = (mb[1] << 16) | mb[2]; host_pid = (ha->d_id.b.domain << 16) | (ha->d_id.b.area << 8) | ha->d_id.b.al_pa; if (rscn_entry == host_pid) { DEBUG(printk(KERN_INFO "scsi(%ld): Ignoring RSCN update to local host " "port ID (%06x)\n", ha->host_no, host_pid)); break; } rscn_queue_index = ha->rscn_in_ptr + 1; if (rscn_queue_index == MAX_RSCN_COUNT) rscn_queue_index = 0; if (rscn_queue_index != ha->rscn_out_ptr) { ha->rscn_queue[ha->rscn_in_ptr] = rscn_entry; ha->rscn_in_ptr = rscn_queue_index; } else { ha->flags.rscn_queue_overflow = 1; } atomic_set(&ha->loop_state, LOOP_UPDATE); atomic_set(&ha->loop_down_timer, 0); ha->flags.management_server_logged_in = 0; set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); set_bit(RSCN_UPDATE, &ha->dpc_flags); break; /* case MBA_RIO_RESPONSE: */ case MBA_ZIO_RESPONSE: DEBUG2(printk("scsi(%ld): [R|Z]IO update completion.\n", ha->host_no)); DEBUG(printk(KERN_INFO "scsi(%ld): [R|Z]IO update completion.\n", ha->host_no)); if (IS_FWI2_CAPABLE(ha)) qla24xx_process_response_queue(ha); else qla2x00_process_response_queue(ha); break; case MBA_DISCARD_RND_FRAME: DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x " "%04x.\n", ha->host_no, mb[1], mb[2], mb[3])); break; case MBA_TRACE_NOTIFICATION: DEBUG2(printk("scsi(%ld): Trace Notification -- %04x %04x.\n", ha->host_no, mb[1], mb[2])); break; } if (!ha->parent && ha->num_vhosts) qla2x00_alert_all_vps(ha, mb); } static void qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, void *data) { fc_port_t *fcport = data; if (fcport->ha->max_q_depth <= sdev->queue_depth) return; if (sdev->ordered_tags) scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, sdev->queue_depth + 1); else scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, sdev->queue_depth + 1); fcport->last_ramp_up = jiffies; DEBUG2(qla_printk(KERN_INFO, fcport->ha, "scsi(%ld:%d:%d:%d): Queue depth adjusted-up to %d.\n", fcport->ha->host_no, sdev->channel, sdev->id, sdev->lun, sdev->queue_depth)); } static void qla2x00_adjust_sdev_qdepth_down(struct scsi_device *sdev, void *data) { fc_port_t *fcport = data; if (!scsi_track_queue_full(sdev, sdev->queue_depth - 1)) return; DEBUG2(qla_printk(KERN_INFO, fcport->ha, "scsi(%ld:%d:%d:%d): Queue depth adjusted-down to %d.\n", fcport->ha->host_no, sdev->channel, sdev->id, sdev->lun, sdev->queue_depth)); } static inline void qla2x00_ramp_up_queue_depth(scsi_qla_host_t *ha, srb_t *sp) { fc_port_t *fcport; struct scsi_device *sdev; sdev = sp->cmd->device; if (sdev->queue_depth >= ha->max_q_depth) return; fcport = sp->fcport; if (time_before(jiffies, fcport->last_ramp_up + ql2xqfullrampup * HZ)) return; if (time_before(jiffies, fcport->last_queue_full + ql2xqfullrampup * HZ)) return; starget_for_each_device(sdev->sdev_target, fcport, qla2x00_adjust_sdev_qdepth_up); } /** * qla2x00_process_completed_request() - Process a Fast Post response. * @ha: SCSI driver HA context * @index: SRB index */ static void qla2x00_process_completed_request(struct scsi_qla_host *ha, uint32_t index) { srb_t *sp; /* Validate handle. */ if (index >= MAX_OUTSTANDING_COMMANDS) { DEBUG2(printk("scsi(%ld): Invalid SCSI completion handle %d.\n", ha->host_no, index)); qla_printk(KERN_WARNING, ha, "Invalid SCSI completion handle %d.\n", index); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); return; } sp = ha->outstanding_cmds[index]; if (sp) { /* Free outstanding command slot. */ ha->outstanding_cmds[index] = NULL; CMD_COMPL_STATUS(sp->cmd) = 0L; CMD_SCSI_STATUS(sp->cmd) = 0L; /* Save ISP completion status */ sp->cmd->result = DID_OK << 16; qla2x00_ramp_up_queue_depth(ha, sp); qla2x00_sp_compl(ha, sp); } else { DEBUG2(printk("scsi(%ld): Invalid ISP SCSI completion handle\n", ha->host_no)); qla_printk(KERN_WARNING, ha, "Invalid ISP SCSI completion handle\n"); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); } } /** * qla2x00_process_response_queue() - Process response queue entries. * @ha: SCSI driver HA context */ void qla2x00_process_response_queue(struct scsi_qla_host *ha) { struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; sts_entry_t *pkt; uint16_t handle_cnt; uint16_t cnt; if (!ha->flags.online) return; while (ha->response_ring_ptr->signature != RESPONSE_PROCESSED) { pkt = (sts_entry_t *)ha->response_ring_ptr; ha->rsp_ring_index++; if (ha->rsp_ring_index == ha->response_q_length) { ha->rsp_ring_index = 0; ha->response_ring_ptr = ha->response_ring; } else { ha->response_ring_ptr++; } if (pkt->entry_status != 0) { DEBUG3(printk(KERN_INFO "scsi(%ld): Process error entry.\n", ha->host_no)); qla2x00_error_entry(ha, pkt); ((response_t *)pkt)->signature = RESPONSE_PROCESSED; wmb(); continue; } switch (pkt->entry_type) { case STATUS_TYPE: qla2x00_status_entry(ha, pkt); break; case STATUS_TYPE_21: handle_cnt = ((sts21_entry_t *)pkt)->handle_count; for (cnt = 0; cnt < handle_cnt; cnt++) { qla2x00_process_completed_request(ha, ((sts21_entry_t *)pkt)->handle[cnt]); } break; case STATUS_TYPE_22: handle_cnt = ((sts22_entry_t *)pkt)->handle_count; for (cnt = 0; cnt < handle_cnt; cnt++) { qla2x00_process_completed_request(ha, ((sts22_entry_t *)pkt)->handle[cnt]); } break; case STATUS_CONT_TYPE: qla2x00_status_cont_entry(ha, (sts_cont_entry_t *)pkt); break; case MS_IOCB_TYPE: qla2x00_ms_entry(ha, (ms_iocb_entry_t *)pkt); break; default: /* Type Not Supported. */ DEBUG4(printk(KERN_WARNING "scsi(%ld): Received unknown response pkt type %x " "entry status=%x.\n", ha->host_no, pkt->entry_type, pkt->entry_status)); break; } ((response_t *)pkt)->signature = RESPONSE_PROCESSED; wmb(); } /* Adjust ring index */ WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), ha->rsp_ring_index); } static inline void qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len) { struct scsi_cmnd *cp = sp->cmd; if (sense_len >= SCSI_SENSE_BUFFERSIZE) sense_len = SCSI_SENSE_BUFFERSIZE; CMD_ACTUAL_SNSLEN(cp) = sense_len; sp->request_sense_length = sense_len; sp->request_sense_ptr = cp->sense_buffer; if (sp->request_sense_length > 32) sense_len = 32; memcpy(cp->sense_buffer, sense_data, sense_len); sp->request_sense_ptr += sense_len; sp->request_sense_length -= sense_len; if (sp->request_sense_length != 0) sp->ha->status_srb = sp; DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) " "cmd=%p pid=%ld\n", __func__, sp->ha->host_no, cp->device->channel, cp->device->id, cp->device->lun, cp, cp->serial_number)); if (sense_len) DEBUG5(qla2x00_dump_buffer(cp->sense_buffer, CMD_ACTUAL_SNSLEN(cp))); } /** * qla2x00_status_entry() - Process a Status IOCB entry. * @ha: SCSI driver HA context * @pkt: Entry pointer */ static void qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) { srb_t *sp; fc_port_t *fcport; struct scsi_cmnd *cp; sts_entry_t *sts; struct sts_entry_24xx *sts24; uint16_t comp_status; uint16_t scsi_status; uint8_t lscsi_status; int32_t resid; uint32_t sense_len, rsp_info_len, resid_len, fw_resid_len; uint8_t *rsp_info, *sense_data; sts = (sts_entry_t *) pkt; sts24 = (struct sts_entry_24xx *) pkt; if (IS_FWI2_CAPABLE(ha)) { comp_status = le16_to_cpu(sts24->comp_status); scsi_status = le16_to_cpu(sts24->scsi_status) & SS_MASK; } else { comp_status = le16_to_cpu(sts->comp_status); scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK; } /* Fast path completion. */ if (comp_status == CS_COMPLETE && scsi_status == 0) { qla2x00_process_completed_request(ha, sts->handle); return; } /* Validate handle. */ if (sts->handle < MAX_OUTSTANDING_COMMANDS) { sp = ha->outstanding_cmds[sts->handle]; ha->outstanding_cmds[sts->handle] = NULL; } else sp = NULL; if (sp == NULL) { DEBUG2(printk("scsi(%ld): Status Entry invalid handle.\n", ha->host_no)); qla_printk(KERN_WARNING, ha, "Status Entry invalid handle.\n"); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); qla2xxx_wake_dpc(ha); return; } cp = sp->cmd; if (cp == NULL) { DEBUG2(printk("scsi(%ld): Command already returned back to OS " "pkt->handle=%d sp=%p.\n", ha->host_no, sts->handle, sp)); qla_printk(KERN_WARNING, ha, "Command is NULL: already returned to OS (sp=%p)\n", sp); return; } lscsi_status = scsi_status & STATUS_MASK; CMD_ENTRY_STATUS(cp) = sts->entry_status; CMD_COMPL_STATUS(cp) = comp_status; CMD_SCSI_STATUS(cp) = scsi_status; fcport = sp->fcport; sense_len = rsp_info_len = resid_len = fw_resid_len = 0; if (IS_FWI2_CAPABLE(ha)) { sense_len = le32_to_cpu(sts24->sense_len); rsp_info_len = le32_to_cpu(sts24->rsp_data_len); resid_len = le32_to_cpu(sts24->rsp_residual_count); fw_resid_len = le32_to_cpu(sts24->residual_len); rsp_info = sts24->data; sense_data = sts24->data; host_to_fcp_swap(sts24->data, sizeof(sts24->data)); } else { sense_len = le16_to_cpu(sts->req_sense_length); rsp_info_len = le16_to_cpu(sts->rsp_info_len); resid_len = le32_to_cpu(sts->residual_length); rsp_info = sts->rsp_info; sense_data = sts->req_sense_data; } /* Check for any FCP transport errors. */ if (scsi_status & SS_RESPONSE_INFO_LEN_VALID) { /* Sense data lies beyond any FCP RESPONSE data. */ if (IS_FWI2_CAPABLE(ha)) sense_data += rsp_info_len; if (rsp_info_len > 3 && rsp_info[3]) { DEBUG2(printk("scsi(%ld:%d:%d:%d) FCP I/O protocol " "failure (%x/%02x%02x%02x%02x%02x%02x%02x%02x)..." "retrying command\n", ha->host_no, cp->device->channel, cp->device->id, cp->device->lun, rsp_info_len, rsp_info[0], rsp_info[1], rsp_info[2], rsp_info[3], rsp_info[4], rsp_info[5], rsp_info[6], rsp_info[7])); cp->result = DID_BUS_BUSY << 16; qla2x00_sp_compl(ha, sp); return; } } /* * Based on Host and scsi status generate status code for Linux */ switch (comp_status) { case CS_COMPLETE: case CS_QUEUE_FULL: if (scsi_status == 0) { cp->result = DID_OK << 16; break; } if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER)) { resid = resid_len; scsi_set_resid(cp, resid); CMD_RESID_LEN(cp) = resid; if (!lscsi_status && ((unsigned)(scsi_bufflen(cp) - resid) < cp->underflow)) { qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d:%d): Mid-layer underflow " "detected (%x of %x bytes)...returning " "error status.\n", ha->host_no, cp->device->channel, cp->device->id, cp->device->lun, resid, scsi_bufflen(cp)); cp->result = DID_ERROR << 16; break; } } cp->result = DID_OK << 16 | lscsi_status; if (lscsi_status == SAM_STAT_TASK_SET_FULL) { DEBUG2(printk(KERN_INFO "scsi(%ld): QUEUE FULL status detected " "0x%x-0x%x.\n", ha->host_no, comp_status, scsi_status)); /* Adjust queue depth for all luns on the port. */ fcport->last_queue_full = jiffies; starget_for_each_device(cp->device->sdev_target, fcport, qla2x00_adjust_sdev_qdepth_down); break; } if (lscsi_status != SS_CHECK_CONDITION) break; memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); if (!(scsi_status & SS_SENSE_LEN_VALID)) break; qla2x00_handle_sense(sp, sense_data, sense_len); break; case CS_DATA_UNDERRUN: resid = resid_len; /* Use F/W calculated residual length. */ if (IS_FWI2_CAPABLE(ha)) { if (scsi_status & SS_RESIDUAL_UNDER && resid != fw_resid_len) { scsi_status &= ~SS_RESIDUAL_UNDER; lscsi_status = 0; } resid = fw_resid_len; } if (scsi_status & SS_RESIDUAL_UNDER) { scsi_set_resid(cp, resid); CMD_RESID_LEN(cp) = resid; } else { DEBUG2(printk(KERN_INFO "scsi(%ld:%d:%d) UNDERRUN status detected " "0x%x-0x%x. resid=0x%x fw_resid=0x%x cdb=0x%x " "os_underflow=0x%x\n", ha->host_no, cp->device->id, cp->device->lun, comp_status, scsi_status, resid_len, resid, cp->cmnd[0], cp->underflow)); } /* * Check to see if SCSI Status is non zero. If so report SCSI * Status. */ if (lscsi_status != 0) { cp->result = DID_OK << 16 | lscsi_status; if (lscsi_status == SAM_STAT_TASK_SET_FULL) { DEBUG2(printk(KERN_INFO "scsi(%ld): QUEUE FULL status detected " "0x%x-0x%x.\n", ha->host_no, comp_status, scsi_status)); /* * Adjust queue depth for all luns on the * port. */ fcport->last_queue_full = jiffies; starget_for_each_device( cp->device->sdev_target, fcport, qla2x00_adjust_sdev_qdepth_down); break; } if (lscsi_status != SS_CHECK_CONDITION) break; memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); if (!(scsi_status & SS_SENSE_LEN_VALID)) break; qla2x00_handle_sense(sp, sense_data, sense_len); /* * In case of a Underrun condition, set both the lscsi * status and the completion status to appropriate * values. */ if (resid && ((unsigned)(scsi_bufflen(cp) - resid) < cp->underflow)) { DEBUG2(qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d:%d): Mid-layer underflow " "detected (%x of %x bytes)...returning " "error status.\n", ha->host_no, cp->device->channel, cp->device->id, cp->device->lun, resid, scsi_bufflen(cp))); cp->result = DID_ERROR << 16 | lscsi_status; } } else { /* * If RISC reports underrun and target does not report * it then we must have a lost frame, so tell upper * layer to retry it by reporting a bus busy. */ if (!(scsi_status & SS_RESIDUAL_UNDER)) { DEBUG2(printk("scsi(%ld:%d:%d:%d) Dropped " "frame(s) detected (%x of %x bytes)..." "retrying command.\n", ha->host_no, cp->device->channel, cp->device->id, cp->device->lun, resid, scsi_bufflen(cp))); cp->result = DID_BUS_BUSY << 16; break; } /* Handle mid-layer underflow */ if ((unsigned)(scsi_bufflen(cp) - resid) < cp->underflow) { qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d:%d): Mid-layer underflow " "detected (%x of %x bytes)...returning " "error status.\n", ha->host_no, cp->device->channel, cp->device->id, cp->device->lun, resid, scsi_bufflen(cp)); cp->result = DID_ERROR << 16; break; } /* Everybody online, looking good... */ cp->result = DID_OK << 16; } break; case CS_DATA_OVERRUN: DEBUG2(printk(KERN_INFO "scsi(%ld:%d:%d): OVERRUN status detected 0x%x-0x%x\n", ha->host_no, cp->device->id, cp->device->lun, comp_status, scsi_status)); DEBUG2(printk(KERN_INFO "CDB: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", cp->cmnd[0], cp->cmnd[1], cp->cmnd[2], cp->cmnd[3], cp->cmnd[4], cp->cmnd[5])); DEBUG2(printk(KERN_INFO "PID=0x%lx req=0x%x xtra=0x%x -- returning DID_ERROR " "status!\n", cp->serial_number, scsi_bufflen(cp), resid_len)); cp->result = DID_ERROR << 16; break; case CS_PORT_LOGGED_OUT: case CS_PORT_CONFIG_CHG: case CS_PORT_BUSY: case CS_INCOMPLETE: case CS_PORT_UNAVAILABLE: /* * If the port is in Target Down state, return all IOs for this * Target with DID_NO_CONNECT ELSE Queue the IOs in the * retry_queue. */ DEBUG2(printk("scsi(%ld:%d:%d): status_entry: Port Down " "pid=%ld, compl status=0x%x, port state=0x%x\n", ha->host_no, cp->device->id, cp->device->lun, cp->serial_number, comp_status, atomic_read(&fcport->state))); cp->result = DID_BUS_BUSY << 16; if (atomic_read(&fcport->state) == FCS_ONLINE) { qla2x00_mark_device_lost(ha, fcport, 1, 1); } break; case CS_RESET: DEBUG2(printk(KERN_INFO "scsi(%ld): RESET status detected 0x%x-0x%x.\n", ha->host_no, comp_status, scsi_status)); cp->result = DID_RESET << 16; break; case CS_ABORTED: /* * hv2.19.12 - DID_ABORT does not retry the request if we * aborted this request then abort otherwise it must be a * reset. */ DEBUG2(printk(KERN_INFO "scsi(%ld): ABORT status detected 0x%x-0x%x.\n", ha->host_no, comp_status, scsi_status)); cp->result = DID_RESET << 16; break; case CS_TIMEOUT: cp->result = DID_BUS_BUSY << 16; if (IS_FWI2_CAPABLE(ha)) { DEBUG2(printk(KERN_INFO "scsi(%ld:%d:%d:%d): TIMEOUT status detected " "0x%x-0x%x\n", ha->host_no, cp->device->channel, cp->device->id, cp->device->lun, comp_status, scsi_status)); break; } DEBUG2(printk(KERN_INFO "scsi(%ld:%d:%d:%d): TIMEOUT status detected 0x%x-0x%x " "sflags=%x.\n", ha->host_no, cp->device->channel, cp->device->id, cp->device->lun, comp_status, scsi_status, le16_to_cpu(sts->status_flags))); /* Check to see if logout occurred. */ if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT)) qla2x00_mark_device_lost(ha, fcport, 1, 1); break; default: DEBUG3(printk("scsi(%ld): Error detected (unknown status) " "0x%x-0x%x.\n", ha->host_no, comp_status, scsi_status)); qla_printk(KERN_INFO, ha, "Unknown status detected 0x%x-0x%x.\n", comp_status, scsi_status); cp->result = DID_ERROR << 16; break; } /* Place command on done queue. */ if (ha->status_srb == NULL) qla2x00_sp_compl(ha, sp); } /** * qla2x00_status_cont_entry() - Process a Status Continuations entry. * @ha: SCSI driver HA context * @pkt: Entry pointer * * Extended sense data. */ static void qla2x00_status_cont_entry(scsi_qla_host_t *ha, sts_cont_entry_t *pkt) { uint8_t sense_sz = 0; srb_t *sp = ha->status_srb; struct scsi_cmnd *cp; if (sp != NULL && sp->request_sense_length != 0) { cp = sp->cmd; if (cp == NULL) { DEBUG2(printk("%s(): Cmd already returned back to OS " "sp=%p.\n", __func__, sp)); qla_printk(KERN_INFO, ha, "cmd is NULL: already returned to OS (sp=%p)\n", sp); ha->status_srb = NULL; return; } if (sp->request_sense_length > sizeof(pkt->data)) { sense_sz = sizeof(pkt->data); } else { sense_sz = sp->request_sense_length; } /* Move sense data. */ if (IS_FWI2_CAPABLE(ha)) host_to_fcp_swap(pkt->data, sizeof(pkt->data)); memcpy(sp->request_sense_ptr, pkt->data, sense_sz); DEBUG5(qla2x00_dump_buffer(sp->request_sense_ptr, sense_sz)); sp->request_sense_ptr += sense_sz; sp->request_sense_length -= sense_sz; /* Place command on done queue. */ if (sp->request_sense_length == 0) { ha->status_srb = NULL; qla2x00_sp_compl(ha, sp); } } } /** * qla2x00_error_entry() - Process an error entry. * @ha: SCSI driver HA context * @pkt: Entry pointer */ static void qla2x00_error_entry(scsi_qla_host_t *ha, sts_entry_t *pkt) { srb_t *sp; #if defined(QL_DEBUG_LEVEL_2) if (pkt->entry_status & RF_INV_E_ORDER) qla_printk(KERN_ERR, ha, "%s: Invalid Entry Order\n", __func__); else if (pkt->entry_status & RF_INV_E_COUNT) qla_printk(KERN_ERR, ha, "%s: Invalid Entry Count\n", __func__); else if (pkt->entry_status & RF_INV_E_PARAM) qla_printk(KERN_ERR, ha, "%s: Invalid Entry Parameter\n", __func__); else if (pkt->entry_status & RF_INV_E_TYPE) qla_printk(KERN_ERR, ha, "%s: Invalid Entry Type\n", __func__); else if (pkt->entry_status & RF_BUSY) qla_printk(KERN_ERR, ha, "%s: Busy\n", __func__); else qla_printk(KERN_ERR, ha, "%s: UNKNOWN flag error\n", __func__); #endif /* Validate handle. */ if (pkt->handle < MAX_OUTSTANDING_COMMANDS) sp = ha->outstanding_cmds[pkt->handle]; else sp = NULL; if (sp) { /* Free outstanding command slot. */ ha->outstanding_cmds[pkt->handle] = NULL; /* Bad payload or header */ if (pkt->entry_status & (RF_INV_E_ORDER | RF_INV_E_COUNT | RF_INV_E_PARAM | RF_INV_E_TYPE)) { sp->cmd->result = DID_ERROR << 16; } else if (pkt->entry_status & RF_BUSY) { sp->cmd->result = DID_BUS_BUSY << 16; } else { sp->cmd->result = DID_ERROR << 16; } qla2x00_sp_compl(ha, sp); } else if (pkt->entry_type == COMMAND_A64_TYPE || pkt->entry_type == COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7) { DEBUG2(printk("scsi(%ld): Error entry - invalid handle\n", ha->host_no)); qla_printk(KERN_WARNING, ha, "Error entry - invalid handle\n"); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); qla2xxx_wake_dpc(ha); } } /** * qla2x00_ms_entry() - Process a Management Server entry. * @ha: SCSI driver HA context * @index: Response queue out pointer */ static void qla2x00_ms_entry(scsi_qla_host_t *ha, ms_iocb_entry_t *pkt) { srb_t *sp; DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n", __func__, ha->host_no, pkt, pkt->handle1)); /* Validate handle. */ if (pkt->handle1 < MAX_OUTSTANDING_COMMANDS) sp = ha->outstanding_cmds[pkt->handle1]; else sp = NULL; if (sp == NULL) { DEBUG2(printk("scsi(%ld): MS entry - invalid handle\n", ha->host_no)); qla_printk(KERN_WARNING, ha, "MS entry - invalid handle\n"); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); return; } CMD_COMPL_STATUS(sp->cmd) = le16_to_cpu(pkt->status); CMD_ENTRY_STATUS(sp->cmd) = pkt->entry_status; /* Free outstanding command slot. */ ha->outstanding_cmds[pkt->handle1] = NULL; qla2x00_sp_compl(ha, sp); } /** * qla24xx_mbx_completion() - Process mailbox command completions. * @ha: SCSI driver HA context * @mb0: Mailbox0 register */ static void qla24xx_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0) { uint16_t cnt; uint16_t __iomem *wptr; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; /* Load return mailbox registers. */ ha->flags.mbox_int = 1; ha->mailbox_out[0] = mb0; wptr = (uint16_t __iomem *)®->mailbox1; for (cnt = 1; cnt < ha->mbx_count; cnt++) { ha->mailbox_out[cnt] = RD_REG_WORD(wptr); wptr++; } if (ha->mcp) { DEBUG3(printk("%s(%ld): Got mailbox completion. cmd=%x.\n", __func__, ha->host_no, ha->mcp->mb[0])); } else { DEBUG2_3(printk("%s(%ld): MBX pointer ERROR!\n", __func__, ha->host_no)); } } /** * qla24xx_process_response_queue() - Process response queue entries. * @ha: SCSI driver HA context */ void qla24xx_process_response_queue(struct scsi_qla_host *ha) { struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; struct sts_entry_24xx *pkt; if (!ha->flags.online) return; while (ha->response_ring_ptr->signature != RESPONSE_PROCESSED) { pkt = (struct sts_entry_24xx *)ha->response_ring_ptr; ha->rsp_ring_index++; if (ha->rsp_ring_index == ha->response_q_length) { ha->rsp_ring_index = 0; ha->response_ring_ptr = ha->response_ring; } else { ha->response_ring_ptr++; } if (pkt->entry_status != 0) { DEBUG3(printk(KERN_INFO "scsi(%ld): Process error entry.\n", ha->host_no)); qla2x00_error_entry(ha, (sts_entry_t *) pkt); ((response_t *)pkt)->signature = RESPONSE_PROCESSED; wmb(); continue; } switch (pkt->entry_type) { case STATUS_TYPE: qla2x00_status_entry(ha, pkt); break; case STATUS_CONT_TYPE: qla2x00_status_cont_entry(ha, (sts_cont_entry_t *)pkt); break; case MS_IOCB_TYPE: qla24xx_ms_entry(ha, (struct ct_entry_24xx *)pkt); break; case VP_RPT_ID_IOCB_TYPE: qla24xx_report_id_acquisition(ha, (struct vp_rpt_id_entry_24xx *)pkt); break; default: /* Type Not Supported. */ DEBUG4(printk(KERN_WARNING "scsi(%ld): Received unknown response pkt type %x " "entry status=%x.\n", ha->host_no, pkt->entry_type, pkt->entry_status)); break; } ((response_t *)pkt)->signature = RESPONSE_PROCESSED; wmb(); } /* Adjust ring index */ WRT_REG_DWORD(®->rsp_q_out, ha->rsp_ring_index); } static void qla2xxx_check_risc_status(scsi_qla_host_t *ha) { int rval; uint32_t cnt; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; if (!IS_QLA25XX(ha)) return; rval = QLA_SUCCESS; WRT_REG_DWORD(®->iobase_addr, 0x7C00); RD_REG_DWORD(®->iobase_addr); WRT_REG_DWORD(®->iobase_window, 0x0001); for (cnt = 10000; (RD_REG_DWORD(®->iobase_window) & BIT_0) == 0 && rval == QLA_SUCCESS; cnt--) { if (cnt) { WRT_REG_DWORD(®->iobase_window, 0x0001); udelay(10); } else rval = QLA_FUNCTION_TIMEOUT; } if (rval == QLA_SUCCESS) goto next_test; WRT_REG_DWORD(®->iobase_window, 0x0003); for (cnt = 100; (RD_REG_DWORD(®->iobase_window) & BIT_0) == 0 && rval == QLA_SUCCESS; cnt--) { if (cnt) { WRT_REG_DWORD(®->iobase_window, 0x0003); udelay(10); } else rval = QLA_FUNCTION_TIMEOUT; } if (rval != QLA_SUCCESS) goto done; next_test: if (RD_REG_DWORD(®->iobase_c8) & BIT_3) qla_printk(KERN_INFO, ha, "Additional code -- 0x55AA.\n"); done: WRT_REG_DWORD(®->iobase_window, 0x0000); RD_REG_DWORD(®->iobase_window); } /** * qla24xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx. * @irq: * @dev_id: SCSI driver HA context * * Called by system whenever the host adapter generates an interrupt. * * Returns handled flag. */ irqreturn_t qla24xx_intr_handler(int irq, void *dev_id) { scsi_qla_host_t *ha; struct device_reg_24xx __iomem *reg; int status; unsigned long flags; unsigned long iter; uint32_t stat; uint32_t hccr; uint16_t mb[4]; ha = (scsi_qla_host_t *) dev_id; if (!ha) { printk(KERN_INFO "%s(): NULL host pointer\n", __func__); return IRQ_NONE; } reg = &ha->iobase->isp24; status = 0; spin_lock_irqsave(&ha->hardware_lock, flags); for (iter = 50; iter--; ) { stat = RD_REG_DWORD(®->host_status); if (stat & HSRX_RISC_PAUSED) { if (pci_channel_offline(ha->pdev)) break; hccr = RD_REG_DWORD(®->hccr); qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, " "Dumping firmware!\n", hccr); qla2xxx_check_risc_status(ha); ha->isp_ops->fw_dump(ha, 1); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; } else if ((stat & HSRX_RISC_INT) == 0) break; switch (stat & 0xff) { case 0x1: case 0x2: case 0x10: case 0x11: qla24xx_mbx_completion(ha, MSW(stat)); status |= MBX_INTERRUPT; break; case 0x12: mb[0] = MSW(stat); mb[1] = RD_REG_WORD(®->mailbox1); mb[2] = RD_REG_WORD(®->mailbox2); mb[3] = RD_REG_WORD(®->mailbox3); qla2x00_async_event(ha, mb); break; case 0x13: qla24xx_process_response_queue(ha); break; default: DEBUG2(printk("scsi(%ld): Unrecognized interrupt type " "(%d).\n", ha->host_no, stat & 0xff)); break; } WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); RD_REG_DWORD_RELAXED(®->hccr); } spin_unlock_irqrestore(&ha->hardware_lock, flags); if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); up(&ha->mbx_intr_sem); } return IRQ_HANDLED; } /** * qla24xx_ms_entry() - Process a Management Server entry. * @ha: SCSI driver HA context * @index: Response queue out pointer */ static void qla24xx_ms_entry(scsi_qla_host_t *ha, struct ct_entry_24xx *pkt) { srb_t *sp; DEBUG3(printk("%s(%ld): pkt=%p pkthandle=%d.\n", __func__, ha->host_no, pkt, pkt->handle)); DEBUG9(printk("%s: ct pkt dump:\n", __func__)); DEBUG9(qla2x00_dump_buffer((void *)pkt, sizeof(struct ct_entry_24xx))); /* Validate handle. */ if (pkt->handle < MAX_OUTSTANDING_COMMANDS) sp = ha->outstanding_cmds[pkt->handle]; else sp = NULL; if (sp == NULL) { DEBUG2(printk("scsi(%ld): MS entry - invalid handle\n", ha->host_no)); DEBUG10(printk("scsi(%ld): MS entry - invalid handle\n", ha->host_no)); qla_printk(KERN_WARNING, ha, "MS entry - invalid handle %d\n", pkt->handle); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); return; } CMD_COMPL_STATUS(sp->cmd) = le16_to_cpu(pkt->comp_status); CMD_ENTRY_STATUS(sp->cmd) = pkt->entry_status; /* Free outstanding command slot. */ ha->outstanding_cmds[pkt->handle] = NULL; qla2x00_sp_compl(ha, sp); } static irqreturn_t qla24xx_msix_rsp_q(int irq, void *dev_id) { scsi_qla_host_t *ha; struct device_reg_24xx __iomem *reg; unsigned long flags; ha = dev_id; reg = &ha->iobase->isp24; spin_lock_irqsave(&ha->hardware_lock, flags); qla24xx_process_response_queue(ha); WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); spin_unlock_irqrestore(&ha->hardware_lock, flags); return IRQ_HANDLED; } static irqreturn_t qla24xx_msix_default(int irq, void *dev_id) { scsi_qla_host_t *ha; struct device_reg_24xx __iomem *reg; int status; unsigned long flags; uint32_t stat; uint32_t hccr; uint16_t mb[4]; ha = dev_id; reg = &ha->iobase->isp24; status = 0; spin_lock_irqsave(&ha->hardware_lock, flags); do { stat = RD_REG_DWORD(®->host_status); if (stat & HSRX_RISC_PAUSED) { if (pci_channel_offline(ha->pdev)) break; hccr = RD_REG_DWORD(®->hccr); qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, " "Dumping firmware!\n", hccr); qla2xxx_check_risc_status(ha); ha->isp_ops->fw_dump(ha, 1); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); break; } else if ((stat & HSRX_RISC_INT) == 0) break; switch (stat & 0xff) { case 0x1: case 0x2: case 0x10: case 0x11: qla24xx_mbx_completion(ha, MSW(stat)); status |= MBX_INTERRUPT; break; case 0x12: mb[0] = MSW(stat); mb[1] = RD_REG_WORD(®->mailbox1); mb[2] = RD_REG_WORD(®->mailbox2); mb[3] = RD_REG_WORD(®->mailbox3); qla2x00_async_event(ha, mb); break; case 0x13: qla24xx_process_response_queue(ha); break; default: DEBUG2(printk("scsi(%ld): Unrecognized interrupt type " "(%d).\n", ha->host_no, stat & 0xff)); break; } WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); } while (0); spin_unlock_irqrestore(&ha->hardware_lock, flags); if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); up(&ha->mbx_intr_sem); } return IRQ_HANDLED; } /* Interrupt handling helpers. */ struct qla_init_msix_entry { uint16_t entry; uint16_t index; const char *name; irq_handler_t handler; }; static struct qla_init_msix_entry imsix_entries[QLA_MSIX_ENTRIES] = { { QLA_MSIX_DEFAULT, QLA_MIDX_DEFAULT, "qla2xxx (default)", qla24xx_msix_default }, { QLA_MSIX_RSP_Q, QLA_MIDX_RSP_Q, "qla2xxx (rsp_q)", qla24xx_msix_rsp_q }, }; static void qla24xx_disable_msix(scsi_qla_host_t *ha) { int i; struct qla_msix_entry *qentry; for (i = 0; i < QLA_MSIX_ENTRIES; i++) { qentry = &ha->msix_entries[imsix_entries[i].index]; if (qentry->have_irq) free_irq(qentry->msix_vector, ha); } pci_disable_msix(ha->pdev); } static int qla24xx_enable_msix(scsi_qla_host_t *ha) { int i, ret; struct msix_entry entries[QLA_MSIX_ENTRIES]; struct qla_msix_entry *qentry; for (i = 0; i < QLA_MSIX_ENTRIES; i++) entries[i].entry = imsix_entries[i].entry; ret = pci_enable_msix(ha->pdev, entries, ARRAY_SIZE(entries)); if (ret) { qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable support -- %d/%d\n", QLA_MSIX_ENTRIES, ret); goto msix_out; } ha->flags.msix_enabled = 1; for (i = 0; i < QLA_MSIX_ENTRIES; i++) { qentry = &ha->msix_entries[imsix_entries[i].index]; qentry->msix_vector = entries[i].vector; qentry->msix_entry = entries[i].entry; qentry->have_irq = 0; ret = request_irq(qentry->msix_vector, imsix_entries[i].handler, 0, imsix_entries[i].name, ha); if (ret) { qla_printk(KERN_WARNING, ha, "MSI-X: Unable to register handler -- %x/%d.\n", imsix_entries[i].index, ret); qla24xx_disable_msix(ha); goto msix_out; } qentry->have_irq = 1; } msix_out: return ret; } int qla2x00_request_irqs(scsi_qla_host_t *ha) { int ret; /* If possible, enable MSI-X. */ if (!IS_QLA2432(ha) && !IS_QLA2532(ha)) goto skip_msix; if (IS_QLA2432(ha) && (ha->chip_revision < QLA_MSIX_CHIP_REV_24XX || !QLA_MSIX_FW_MODE_1(ha->fw_attributes))) { DEBUG2(qla_printk(KERN_WARNING, ha, "MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n", ha->chip_revision, ha->fw_attributes)); goto skip_msix; } if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP && (ha->pdev->subsystem_device == 0x7040 || ha->pdev->subsystem_device == 0x7041 || ha->pdev->subsystem_device == 0x1705)) { DEBUG2(qla_printk(KERN_WARNING, ha, "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X, 0x%X).\n", ha->pdev->subsystem_vendor, ha->pdev->subsystem_device)); goto skip_msi; } ret = qla24xx_enable_msix(ha); if (!ret) { DEBUG2(qla_printk(KERN_INFO, ha, "MSI-X: Enabled (0x%X, 0x%X).\n", ha->chip_revision, ha->fw_attributes)); return ret; } qla_printk(KERN_WARNING, ha, "MSI-X: Falling back-to INTa mode -- %d.\n", ret); skip_msix: if (!IS_QLA24XX(ha) && !IS_QLA2532(ha)) goto skip_msi; ret = pci_enable_msi(ha->pdev); if (!ret) { DEBUG2(qla_printk(KERN_INFO, ha, "MSI: Enabled.\n")); ha->flags.msi_enabled = 1; } skip_msi: ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler, IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha); if (!ret) { ha->flags.inta_enabled = 1; ha->host->irq = ha->pdev->irq; } else { qla_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d already in use.\n", ha->pdev->irq); } return ret; } void qla2x00_free_irqs(scsi_qla_host_t *ha) { if (ha->flags.msix_enabled) qla24xx_disable_msix(ha); else if (ha->flags.inta_enabled) { free_irq(ha->host->irq, ha); pci_disable_msi(ha->pdev); } }