hawao push for android 12
* tag 'MMI-S2SE32.28-28-4' of https://github.com/MotorolaMobilityLLC/motorola-kernel-modules: (2402 commits)
dlkm: vibrator: No vibration when media controls working.
hawao+oled: recharger change level to 98%,200mv
Add kalama in Build_external_kernelmodule.mk
not notify current changes
charger: change the adc value unit and add slave iio
charger: Rename bq2597x to cp
devon:optimize charGing
hawao+oled: fg 1st(cw2217) change to 99 ,2nd(sm5602) change to 98
charger:remove read permission
charger:increase wait_time_out
charger:add I2C 32bits addr interface
Rhodec: Uptade chipone_tddi_fhd_mmi driver
sm5350_bl: support current align configuration for exp mode
devon:charger bring up
Devon:Bringup Egistec FPS ETS_617
Devon:Bringup Egistec FPS ETS_617
charGing: delete redundant code
FG: add fake battery in mm8013
Notify mmi_battery change when combo current change
dlkm: leds/aw2033: add initial version driver
oneli: update wl2864c makefile
Fix parade touch driver build eror
Add CLI touch feature of single tap to wakeup device
rhode: input touch focal add reset
rhode: input touch fix factory test
charger:cps4019 fix build errors
charger:Add Android.mk and Kbuild files
charger:cps4019 wireless charGing bring up
devon:charger bring up
add chipone single tap and cqatest function
chipone single tap function
sgm41513:add sgm41513 chipid detect,
devon:charger bring up
sgm4154x:add sgm41513 macro control.
devon:charger bring up
devon:charger bring up
devon:charger bring up
Change CLI touch test limits file name format
Bringup FPC Fingerprint
Bringup FPC Fingerprint
driver/egis: Update Makefile to make the building compatible
Add CLI touch sysfs factory test node
Hawao+oled: the 2nd fg(sm5602)set 97% to 100%
Comment out unused CLI sysfs node code
PD: apply sc2150A vendor patch
Revert "(CR): PD: apply sc2150A vendor patch"
Adjust the paired battery policy
charGing: update HW current max to userspace
charGing: improve recharge batt voltage after stop
PD: apply sc2150A vendor patch
charGing: add device node support
charGing: add iio sys support
fg: bring up fuel gauge mm8013
charGing: charger pump quit when vbat < chrg_step_cv_volt
rhode: input touch fix build id
dlkm: chipone_tddi_fhd: add initial chipone fhd tddi driver
EQS: Fix for compile.
Fix system crash when main touch uses LDOC13
charGing: add bq25960 gpio irq
charGing: add bq25960 logs
Add ibat polority invert from dt
Create rbs fod driver for dubai
devon:sensors bringup
Revert FOD change from capacitive rbs
remove unused dependence sym ref
Fix fod event not working during touch resume
charGing: modify ss_timeout to max value
Hawaii+ OLED:fpsensor chipone enable power control
[Hawaii+Oled]Remove the print function of fingerprint hard interrupt EGISFP
Fix relay build dependence
dlkm: sm5350_bl: add default brightness config
charge : fix read VBUS error cause charGing power climb slow issue
optimize battery charGing policy
devon:sensors bringup
Add relay between fps and touch
Trigger fod event only when FOD is enabled
Add CLI touch factory test cp_panel node
charGing: rename filename and fix build errors
fg: fixed sm5602 can't update info immediately
Li:capsensor factory bringup
Change config_id format for FW upgrade
dubai: vibrator fix rtp issue
FG: Add mm8013c driver code
charGing: add bq25960 driver
charger: fix qc3p rerun bc1.2 fail w/ some qc3.0 adpter
charGing: Default using HW ILIM for bq25890 and SC89890
Fix "active_panel" undefined build error.
Fix build errors with missing header files.
dlkm: sm5350: get map mode from dtsi
Change parade touch driver header files path
Add CLI parade touch suspend/resume logic
Support receiving dual-screen notifiactions.
charGing: sometime main charger can't recovery to max icl
smart_pen_charger: Update pen soc to ADSP
The whole charGing process will go twice CV
let hal to control the log level
Add HW chip detect mode for ST NFC
rhode: update charger mode & ito test result
Revert "(CR) nova_0flash_mmi: log touch down event timestamp"
Add module parameter to enable panic on delta_vbat
cyttsp5_core.c: Import namepace for "kernel_read"
Change CLI touch test return data format
Revert "(CR): SM5602_FG: apply patch-version: 20220212_00"
dynamic adjust battery voltage
charGing: fixed build error
Rhode: Modify ITO test way from "echo" to "cat"
charGing: fixed build error
charGing: add qc3p sw detected for sc89890H
SM5602_FG: apply patch-version: 20220212_00
dlkm: vibrator: Support camera actuator noise reduction
Rhode: TP: focal ic bringup: driver files upload
PD: add sc2150A vendor patch
charGing: clear charger type variable
charGing: ignore setting qc icl when pd active
Set paired battery discharge load based paired_ichg
Add CLI touch sysfs node for factory test
nova_0flash_mmi: log touch down event timestamp
modules:sc89890h:bringup second master charger otg
charGing: remove the vbat condition which enable 33W
charGing: increase qc3p power judge threshold
modules:Second charger could recharge after report full charge
charGing: report power max 30W when usb type is qc3p
sar:add driver for multi sx937x
sar: update the driver of aw9610x to v0.9.3
FG: SM5602 FG add cycle_count/fcc_design/counter property
Update zero tap down and up logic
rhode: solve the problem of slow power-off of front dvdd
Support a main battery power supply
Fix cyttsp5 driver crash
add paired battery info notification
add paired id to support paired battery notification
ignore optional dts property exist check result
Use touch mmi class method to do FW upgrade
Support touchscreen class in the parade drvier code.
Hawaii+oled: chipone fingerprint disable power control
qc3p beGing charGing voltage to 3V
slow attach 33w change code buld fail
Solve the problem of sending command conflicts
chg: fix qc3p rerun bc1.2 fail w/ some qc3.0 adpter
charGing: slow attach usb will not charGing as 33w
charGing: avoid I2C bus pending
rhodec: fix compile error for ILI7807S
modules: Can't show turbo icon for quickly plugout/in usb
rhodec:Bringup touch TXD ILI7807S
Use of_ API to parse gpio pin number
Fix parade tma5xx touch driver compiling error
Add initial parade touch driver code
charGing: set icl 1.5A when type_c mode is medium
rhode: long time vibration notice camera
gauge: force set sm5602 temperature to 25 degree
modules: vision station WHITE MASK test failed
FG: Rt9426a fg add soc ir comp
charGing: avoid icl =100ma for 33w charger
FG: sm5602 fg support muti-battery parameter
DLKM/fps:optimise focal driver
charGing: add pd support judge
HAWAO+OLED: chipone fingerprint modify the power-on sequence
gauge: force batt present in bt station for factory test
ibiza:disable power control for chipone FPS
input: goodix_v1510: fix irq wake disable unbalanced issue
Support screen callback thru panel notification
use correct macro for FOD
discrete:optimize charging enabled interface
qti_glink_charger: Add wireless dump info
smart_pen_charger: Add power_supply_changed when receive PEN event
charging: report usb present when pd hard reset
Bringup sgm4154x charger driver to Moto product
Add initial sgm4154x driver code from vendor
FPS: Modify the power-on sequence for focaltech
2snd Fuelgauge SM5602 move temp coefficient to ext channel
2snd Fuelgauge SM5602 current direct set and coefficient
sm5602:set battery temp to 25 in moto-factory mode
cw2217b:set battery temp to 25 in moto-factory mode
Add watchdog_cpu_dump and tzlog_dump support on 5.4
Hawao:Enable power gpio for Chipone FPS
DLKM/fps:add build control for focal
charging: fixed 15W product build error
charging: add SW QC3+ 33W turbo charging
goodix: Open the touch esd check function
charging: add mutex lock init
power:fet_control: Apply main batt ocv instead of v_now
charging: avoid i2c error when system resume and suspend
DLKM/fps:optimise screen status interface for focal
modules:regulator_vibartor:add regulator long short voltage logic.
lock mode switching operations for thread synchronization.
sar: support sar reset after usb hot-plug
dlkm:Update rbs driver for FOD
mmi_annotate: add unpersist annotate memory region to minidump
focaltech_v3_mmi:add touchscreen mmi to improve FW logic
goodix: Modify the report rate command.
dubai: vibrate add short index
Increase the number of I2C retries.
dubai: input touch add wait pm
qc3p:set qc3p charging voltage threshold 3.4V
Change to mdelay for power up delay
Adjust bq27426 fg module to support Android S
Revert (CR):sgm4154x:add hawao vbus adc sample ratio
wt6670: add QC3P firmware num node to /proc/driver
DLKM/fps:optimise power ctl for focal
FG: apply rt9426a 0015 patch
rhodep:open charger mode;
charging: enable irq wake up
charging: optimize sgm41542 charging type detected
Revert "(CR):add firmware interface"
bq2589x:add qc3p charger type
sgm:add qc3p charger type
backlight/sm5350: Add a sm5350 IC which is second backlight IC
charging: avoid to report usb type before apsd done
charging: add icl*vbus to report power max
charger: compatible NU2105 Charge Pump in bq2597x
Reset charger configure and constraint for glink down
FG: rt9426a add cancel_work when system into suspend
wt6670: add retry function to wt6670 read fw
Update Goodix TP FOD event implementation
qc3p:optimize power supply init
mmi_annotate: write info mem when persist mem unsupported
[hawaii+oled]:vibrator long short vibration intensity 1/2
smart_pen_charger: Add PEN_STAT_CHARGE_DISABLED
mod the sc89890h register config
Rhode:use regulator interface to control vbus
dubai: input touch add gki support
bq:add enable termination function
FG: RT9426a add safeguard for SOH
FG: RT9426A add safeguard for ocv_index
goodix: Solve cpu_latency_qos_add_request called warning
input: goodix_v1510: add charging and gtp-tools node
PD: config cc status for sc2150 after shutdown
Do not re-enable the stylus when the stylus mode is switched
mmi_charger:use orderly shutdown in factory mode
sgm4154x:add hawao vbus adc sample ratio
qc3p:limit ibus 300mA for main charger no ibus adc
charging: Ignore the PD vote icl unless BC1.2 done
add charger ic - sc89890h config
modules:add sm5602 patch to fix the soc jump problem
FG: Modify SM5602 FG first update battery data time to 50ms
add force_chg_auto_enable interface
add firmware interface
Disable irq before entering gesture mode and IC resetting.
input: goodix_v1510: enable single tap function
Support resend stylus cmd after abnormal resetting.
Record and restore the value of the mode
QC3P:use qc3p config distinguish other not qc3p project
QC3P:detection and iio sys support
z350: add 2nd z350 qc logic
sgm:add enable termination function
discrete:add enable termination iio definition
qc3p:add main charger termination ctl algorithm
QC3P:turbo charger module return value error
dubai: vibrator add haptic rtp
qc3p:optimize turbo charging current
charging: add ibat monitor work
fg: get current in real time
sm5602: fix kernel panic when the device resume
PEN_HALL:disable wakeup source
fs:exfat-linux:Integrate exfat-linux open source driver
fg/sm5602: Early detection device chipID
fg/sm5602: correct the unit of vbat and temp
sc89890h:device: add sc89890h device id
focaltech_v3_mmi: rename .i file to fix potential build error
focaltech_v3_mmi: enable firmware download
focaltech_v3_mmi: add sys touch node & info
module/input:hawao: add focaltech_v3_mmi for i2c flash
Rhode 5GP: add wt6670 get firmware num node
dubai: input touch update fw 21120803
DLKM/fps:add power ctrl for ets kernel driver
pd: bring up sc2150a
power:fet_control Balance ckt Fet Close Batt2 over 200mV
wt6670: wake up wt6670 when get version num
sm5602: Add new fgauge sm5602
QC3P:iio sys channel add kernel version
QC3P:module name change to mmi_discrete_turbo_charger
QC3P:discrete turbo charger
FG:dynamic config sns resistance
QC3P:detection and iio sys support
QC3P:iio sys channel
QC3P:add iio sys support
QC3P:ADC algorithm compatible
QC3P:copy of module mmi_parallel_charger_iio for mmi_discrete_turbo_charger
goodix: support film sensitivity function.
Support report rate switch in RoguePRC
dubai: vibrator add long brk
PD: Pick Richtek patch13 to improve irq response speed
PD:Revert "(CR):rt1715:add debugfs interface for dump reg"
PD: pick Richtek patch12
FG: power_supply_property get rt9426a battery info from local value
dubai: input touch support fod
sar: aw9610: Modify sar sensor voltage.
moto regulator vibrator: fix null pointer bug
charging: config ICL after BC1.2 done
qti_glink_charger: Add wls_notify_callback
qti_glink_charger: Add folio_mode
qti_glink_charger: Add wls input current limit for thermal
PD: config pd active is inactive status after cable plug out
wt6670f_qc3p: qc3p wt6760 isp download function
charging: add sem lock to protect dpdm detected
FG:cw2217 Remove the redundant msleep in the read i2c operation
FROMGIT: usb: gadget: f_mass_storage: Disable eps during disconnect
sar: aw9610: the reference channel can't be seen on user layer
bias/ocp2138:add support ocp2138 bias ic config
fg: cw2217 add ui_soc feature
IC needs to confirm the device within 50ms after power-on
No need to send the suspend command when power off.
Revert "(CR):power: cw2217 add ui_soc feature"
bq2597x: bq2597x cp_enable interface does not work
dlkm: sec_nfc: add samsung nfc driver
dlkm: sd77426 driver add soh api
power: cw2217 add ui_soc feature
goodix_v1510_mmi: check if panel is available
focaltech_v2_mmi: check if panel is available
bms: do battery power supply change when fg update data
Power: remove "\n" about mmi_discrete showing factory test node
charging: add charge counter prop
kernel:export interface tcpm_inquire_typec_remote_rp_curr
charging: modify heartbeat cycle to 100s
bms: modify battery capacity unit from mah to uah
charging: remove useless power supply prop
charging: remove FULL status in charging ic driver
power:fet_control ironmn: ps prop usb type BRICKID
regulator: Force shutdown all regulators when system power off.
charging: stop charging when capacity > upper_limit
charging: fixed otg boost current limit error
Add pm_qos control to reduce the interrupt responce time
wl2868c: modify ldo2 and ldo6 default voltage
charging: fixed the error HVDCP voltage standard
charging: set register 3250ma when icl >=3A
smart_pen_charger: Add pen_status and pen_error notify
qti_glink_charger: Add tx_mode and rx_connected sysfs node
PD: Extend PD adapter class charge function
charge: add chage&PD policy
power: rt9426a update fcc design
Rhode4G: Implement different ldo compatibility.
Revert "(CR): Add pm_qos control to reduce the interrupt responce time"
rhodep: camera power IC et5907 config
Add calibration noise error handler
Add pm_qos control to reduce the interrupt responce time
rhode: rhode 4G camera ldo config[2/3]
charging: fixed uevent block issue
mmi_qc3p_wt6670f: int pin config to input mode
Revert "(CR): Revert "Revert (CR) power:fet_control Vbatt2 balance path""
Revert "(CR) power:fet_control Remove ps_notification cb"
qpnp_adaptive: Change Makefile to compatible with Android S build
dlkm: Add check if panel is available for gt9916s
power: fix rt9426a get the negative soc or soc jump
Wallet shown slow when screenoff at qingdao
mmi_qc3p_wt6670f: remove QC3.5 detection in shutdown ops
power:fet_control Remove ps_notification cb
Revert "Revert (CR) power:fet_control Vbatt2 balance path"
charging: update charging status when power supply get
support pmk8350 gpio3 as stylus clk.
charging: use msleep instead of mdelay
dlkm: silead_fps: remapping the keycode
charging: defined default termination current 120ma
charging: optimize ICO feature
charging: schedule monitor work when charging
charging: enable absolute vindpm
support goodix edge suppression function.
goodix: Support interpolation game mode function.
stmicro: Add the judgment of the sensitivity mode value.
dlkm: nfc: alway probe nfc driver
mmi_qc3p_wt6670f: fix wt6670f driver bug
Revert "(CR) power:fet_control Vbatt2 balance path"
charging: optimize otg current setting logic
Support leather mode setting.
charging: fixed sometimes don't request dpdm issue
sar: modify the vdd name for aw9610.
mmi_charger: align gki 2.0 requirement
charging: enable ILIM pin for bq25890H
bq2597x_mmi_iio: add bq2597x gki and irq code
bq2597x_mmi_iio: add bq2597x initial code
mmi_qc3p_wt6670f: add qc3p logic initial code
mmi_discrete_charger: modify enum redefined
sgm4154x_chg_mmi: changed chg_en_pin judgment logic
mmi_charger: modify enum redefined
charging: fixed unit can't connected PC sometimes
milan5G: sar sensor driver
sar: add aw9610 driver
charging: avoid vbus voltage increase to 12V
charging: add qc3.0 arch for bq25890H
power:fet_control Vbatt2 balance path, chrg fullcurr, ocp
charge: add iio interface for typeC mode
typeC: add iio interface for typeC mode
charging: config charger power supply type unknown
mmi_charger:use orderly shutdown in factory mode
Close the stylus clock when system suspend.
charging: avoid kernel panic
Fix path for ion lib in Kernel 4.19
power: early register bms_phy client for cw2217_fg
Update Trustonic TEE driver module to version 410a-V108
pstar: input touch add delay for mode
Power: update fg current orientation
charging: fixed get vbus voltage error
charging: add VREG fine tunning for setting float voltage
charging: replace numeric value with macros
charging: adjust sgm41542 prob sequence
sgm7220: add typeC mode switch interface for sgm7220
tcpc: add typeC mode switch interface
sgm7220: Reorganize sgm7220 driver architecture
Support goodix single tap to wake the device
power: modified the caculation formula of ocv_checksum_dtsi
charging: add qc3.0 charging feature
sr100: Increase delay range on read/write
goodix: support charger mode switching.
stmicro: support touch film sensitivity switching
milanf: dlkm: Support game mode by defualt on nova_0flash_mmi
fts: deleate the PM_WAKEUP_EVENT in interrupt threaded
DLKM: UI batt level show 100% when real batt level 0%
Suspend and resume process using touchscreen class.
power: cw2217b user_rsense modify to 10mhom
charging: disable HVDCP detected
Solve goodix tp firmware upgrade problem
pct1812_mmi: no touch zones
print ulog when write oem glink command
bq25890: set input voltage limit 4600mv
charging: setting icl=0 for usb suspend
power: create chg_type node for factory test
touchscreen_mmi: Support refresh reate notification in Rogue
dubai: touch use gki api
dlkm: fix vibrator stop fail issue
typeC: add typec cc orientation interface
typec: add host and device interface
charging: add iio psy to provide api for other modules
dlkm: rt9426a fg update read fg_extreg_table
Cypfq: dlkm: Bringup touch CSOT ILI7807S
dlkm: rt9426a fg update rt9426a_read_page_cmd
charging: fixed user version build error for bq25890H
wls-chrg: Add FOD_CURR and FOD_A/FOD_B settings API
charging: dcp current base on dtsi config in mmi charger
charger/bq25890: improve charger BC1.2 detection & rerun apsd
typeC: import correct Modules.symvers in GKI build mode
dlkm: Add focaltech fps module
dubai: vib update file name
power: discrete charger policy create force_chg_fail_clear
dubai:input touch init setup
Update goodix berlin touchscreen driver to v1.2.3
Power: discrete_charger policy create factory tcmd test node
charging: optimize bc1.2 detect for sgm41542
DLKM/sar:optimise sx9375 driver on bo
power: add get charing current api for discrete_charger_class
power:fet_control: ironmn: Fix typo in chrg-fullcurr-en-gpio
dlkm: add new regulator vibrator driver
hall:fix not report issue
pct1812_mmi: custom config options
pct1812_mmi: report scroll gestures
pd: add PD20/PD30 interface for tcpc
pd: create pd adapter class
charger/bq25890:export api for charger class
goodix: support stylus mode switching.
power: discrete charging solution intial version TCMD driver
backlight: fix brightness flash issue
Upgrade egis driver for supporting ET721
charging: fixed charging policy kernel panic
Modify the config id and build id
charger/bq25890: stop ADC when system shutdown
sgm41542: provide some api for charger class
charging: add discrete ics charging policy
power: cw2217 fg's name rename to bms from battery
power: rt9426a fg's name rename to bms from battery
power: cw2217 fg add fcc/fcc_design info
dubai: vibrator init setup
power: rt9426a_fg introduce supprot muti-battery parameter func
power: cw2217 introduce mutil-battery parameter func
UWB: support build in kernel-5.10
sx937x:enable usb cal
Charger/bq25890: force 5V/2A charging
power: cw2217 fg update battery parameter
power: rt9426a register charger_full node
power: apply 1th battery parameter for CW2217 fg
power:fet_control: Add logic for ironmn EVB HW 2nd Batt
charger/bq25890:disable maxcharge handshake
charger/bq25890:pull charge enable pin low when charge
Revert "(CR) build: Only include modules needed by product"
charger/rt9467:remove MMI_STOPSHIP change.
Add a new DLKM to support smart pen charger driver
Add OEM glink notification and notifier call chain
charger/bq25890: add usb properties
Resolve compilation errors for unused functions
qti_glink_charger: extend addr&data to UINT32
typc: Open macro for TCPC
charging: force 5V/2A
solve the kobject_get_path undefined in gki build
Only save test file in factory build
sgm7220: add sgm7220 pwr interface
charger/bq25890: force D+/D- detection for APSD
typec: Open pd dbg info
Does not distinguish 9916 and 9916P touch chips.
touchscreen: dynamic check the goodix device status
touchscreen: dynamic check the stmicro device status
mmi_info: provide check dynamic device status interface
xpeng: input touch add wait when single tap
mmi_info: Get bootconfig from device tree
utags: read utag block device path in bootconfig from device tree
utags: Use bio to replace kernel_read and write API
charger/bq25890:add BC1.2 feature
rt1715:add debugfs interface for dump reg
power/charger: add init bq25890 driver
power: rt9426a_fg add soh api
power: introduce fuel gauge cw2217b driver
backlight: support backlight current align configuration for exp mode
backlight: add lm3697 map type for linear or exponential mode
backlight: add aw99703 map type for linear or exponential mode
goodix: support factory tcmd test.
goodix: update test file to 1.2.2 version
charging: detect hw chip id before do any action
Power: enable rt9426a fg parse dts function
power/charger: add walkaround to fix REGN side effect
power/charger: add free IRQ before reset
goodix: enable stylus clock on Rogue project.
charging: add HVDCP detected function
backlight: don't enable aw99703 backlight while brighness level 0
pct1812_mmi: properly fail probe on i2c error
Revert "(CR): mmi_charger: Fix battery_supply_init, batt_psy."
power/charger: add rt9467 charger driver
mmi_charger: Fix battery_supply_init, batt_psy.
Support loadding multiple config files
build: Only include modules needed by product
pct1812_mmi: control debug messages
pct1812_mmi: added input device
pct1812_mmi: firmware update feature
dlkm: add new silead fps driver
Add sysfs to support force disable charging
qti_glink: Add sysfs node to get wireless chip id
add lpd and vbus present state
Send LPD and VBUS uevent for LPD alarm feature
vibrator: add new ldo vibrator driver
Support touchscreen calss in the goodix drvier code.
qti_glink_charger: move WLS property types to the end
GKI kernel build upgrade
build: Only include modules needed by product
set screen default state to on
dlkm: sd77426 modify battery NTC table
fet_control: Add fet_control driver, full_current_en
charging: add usb property
charging: update sgm41542 driver V002
usb: mass_storage: Add support for SC_REBOOT
typec: define sgm7220 typec func
fix mass_storage module GKI build issue
copy mass_storage driver from Kernel as initial version
typec: improve rt1715 code
typec: remove qcom pmic code
arm/dts: improve rt1715 typec and pd compatible
hall pen kernel bringup
typec: Add sgm7220 driver initial version
charging: add bc1.2 feature
DLKM: force 5V/2A charging
charging: fixed build error for sgm41542 default code
charging: add SGM4154x charger basic driver
pct1812_mmi: self-test and sysfs interfaces
power: add detect sd77624 ic hw
goodix_brl_mmi: Add mmi status check.
Modify the goodix driver code format
Update the poll mask when polling is aborted by hal
mmi_sys_temp:fix compilation error.
power: update sd77624_fg driver
qti_glink_charger: Add sysfs node for factory wireless testing
charge:Enable aicl at factory boot mode
touchu:gc7372 tp modify for charger test and gesture
usbnet:USBLAN Super speed plus support
dlkm/wl2866d: disable avdd1 when device shutdown
backlight: add aw99703 led boost configuration
charge: define pps charge min out current
charge: add limit main charge flag
DLKM: Update SD77426 driver
Add panel notification for egis rbs driver
regulator: fix aw37501 gki build error
regulator: add aw37501 lcd bias power driver
pd: Add rt1715 driver initial version
Cypfq: dlkm: Gc7372 add enable/disable wake irq for single tap
Support sensitivity mode function
power: introduce sd77426 fuel gauge driver
power: add rt9426a driver
add glink oem command to get LPD info
focaltech_v2_mmi: keep rst high when config only for IDC
mmi_info: Increase the MAX_BL_BUILD_SIG
Cypfq: dlkm: Add power off process for ili9882a
Update goodix berlin code to V1.1.21
charge: notify mmi-smbcharger-iio while charge pump start working
charging: Add PD charging in DLKM
pct1812_mmi: firmware upgrade
pct1812_mmi: pct1812ff kernel driver
Cypfq: dlkm: Add charger detection feature for ili9882a
mmi_annotate: support minidump store
Support touch corner/edge suppression function.
Cypfq: dlkm: Support single tap feature for gc7372
cp: Remove charge rate, age, cycle
Cypfq: dlkm: Change read vendor id process
hall driver bring up
watchdogtest: support build in kernel-5.10
Cypfq: dlkm: Improve gcore_mmi driver
Cypfq: dlkm: Add GKI module dir definition
charging: modify heartbeat cycle to 100s
remove the mmi_info module dependency
dlkm: bo: Support single tap feature for ili9882_mmi
charger: Rename sc8549 to cp
xpeng: input touch add game api
charger:adaptive charger tolerance optimization
goodix_fod_mmi.ko: Update Makefile to compat kernel 5.10
Use bi_bootmode instead of mmi_bl_bootmode.
When find drm panel successfully, set panel_status to 0
FPS: Support multi-fingerprint function.
put register_panel_notifier into ts_mmi_worker_func.
Delayed active panel detection
backlight: fix lm3697 probe fail panic
backlight: add lm3697 led boost configuration
use bi_bootmode to query the bootmode
Cypfg: dlkm: Improve gcore_mmi driver
fixup! (CR): mmi_info: read all from bootconfig
mmi_info: read all from bootconfig
backlight: add lm3697 hbm current mode configuration
mmi_info: read bootreason from bootconfig
utags: reads bootdevice name from bootconfig
qpnp_adaptive_charge: Add adap_reinit
charge: resolve sc85xx charge icon dont disappear
cp: improve 8549 read status register
modules: add leds-indicator-pwm.c driver
parallel:init thermal parameter at high temp
Rogue PRC ST54x driver
Close the calibration operation after fwupdate.
Modify bm ulog and mmi chargers for Android S
focaltech_v2_mmi: disable focaltech driver drm notify
ffc: add ffc featrue
CP: Remove unuseful code
qc3p:workaroud qc3p shalcomm adapter
Modify the touchscreen report rate
CP: Use CP read battery voltage
slg5bm43670: Update slg5bm43670 for Kernel 5.10
QC3P:add afvc compensation voltage
PD:add afvc compensation voltage
pstar: input touch update edge set
pstar: input touch add edge support
focaltech_v2_mmi: don't set gesture_mode enable as default
Adjust the heartbeat time to 100s in discharging state
sx937x:Android S bringup
Solve the problem of incompatible type 'struct timespec64'
Slove the build error: redefinition of 'panel_event'
fpc_fps_mmi: Modify Makefile for Android S build ko
adjust moto_f_usbnet driver makefile
Bring up touchscreen_mmi in Rogue S project.
Bringup stmicro_mmi touch module in kernel-5.10
Cypfg: dlkm: Improve gcore_mmi driver
Revert "(CR) sx937x:mv ps_get_state to work callback"
Revert "(CR) sx937x: change global_sx937x initialization position"
Modify the ITO test command
sx937x: change global_sx937x initialization position
sx937x:mv ps_get_state to work callback
qpnp-adaptive-charge: use mmi_charger to contrl battery charging
add vote mechanism support for mmi_charger
qc3p:limit pulse not beyond max count
use disable_irq_nosync in interrupt handler
Add force_charging_enabled sysfs
Add force_charger_suspend sysfs
CP: add cp switch enable detect
CP: force disable CP while plug out usb cable
CP:Add switch enable detect function
cp: config sc8549 fault bit
Fix the build error on denver project.
add charger state sync interface
Revert "(CR): send charge rate uevent when power supply changes"
Need to update fw on resume for zero-flash touch IC.
novatek: Support parameter upgrade method
st21nfc:support build in kernel-5.10
qc3p:Set AICL thres at qc3p pmic charging
dlkm: add enable CP api
add power ctrl for fpc driver
add power ctrl for goodix kernel driver
aw8695: move camera start entry before the vibrator timer
dlkm: Touch gc7372 bringup
pstar: vibrator add moto fw
Fix artificial vibrating pattern caused AF always on.
charge: Add thermal interface
qc3p:clear sm work when vbus off
Add sense off process to enter the idle process.
CP: add qc3p charge policy
CP: Reorganize charge pump
Print ADSP battery manager log if charging changes
Create bm_adsp_ulog module
qc3p:config 33W charging current
sx937x:fix wrong POWER_SUPPLY_ONLINE define
Cyprus: dlkm: ili9882 driver improvement
input: focaltech_v2_mmi: add ft3519 upgrade function
Solve the build error: MODULE_IMPORT_NS missing
pstar: sar: support multi parameters for different panels
aw8695: optimize vibrator&camera resonance issue
Stmicro: Support parameter upgrade method
Add flash mode sysfs node in touchscreen mmi
dlkm: lm3697: free resouces when init failed
DLKM: bring up corfup PD 30W charging
charging: pick base parellel charger from mmi_parallel_charger
send charge rate uevent when power supply changes
bq25980:update charge VOUT parameter
bq27426: Fix kbuild to use ANDROID_BUILD_TOP
mmi_info: support build in kernel-5.10
mmi_annotate: support build in kernel-5.10
utags: support build in kernel-5.10
bos0614_mmi: fix alignment issue
Enable PANEL_NOTIFICATIONS for berlna touchscreen
Revert "(CR): fix user version build error"
Add NVT_SET_TOUCH_STATE to avoid compilation errors
Deleate fts_system_reset in wait_for_ready
Add 30W turbo charger type
touch mmi:declare dependency.
dlkm: leds_aw99703: free gpio if init failed
dlkm: leds_lm3697: add initial version lm3697 driver
Fix berlna user version build error.
Support novatek single tap in berlna
fix user version build error
sx937x:change offset val bit mask
touch mmi:2nd patch, fix user version build error.
touch mmi:Fix user version build error.
charger:mmi_hb_wake lock not released
SX937x: USE power online state
bos0614: access to sysfs for others
bos0614_mmi: waveform shape feature
focaltech_v2_mmi: bringup ft3519 on kernel 5.4
qc3p:config ibus max to 3A
mmi_parallel_charger:reduce charge rate report
dlkm: Cyprus: touch: ili7807s bringup
Add Egis fps kernel module for rbs
Support report rate switch
Add game mode parameter adjustment function
input: goodix_v1510: change to api in chip vendor whitelist
Add pollForEvent check mechanism
smbcharger:QC3P charging support
module:QC3P charging support init
module:mmi parallel charger qc3p repo init
bos0614_mmi: support rev C
Delete the calibration process on probe
Support single tap to wake the device
power:fet_control: Charge path gpio too slow
Fix the BTN_TOUCH report error
Solve the issue that firmware can not be updated.
Add support for Build_external_kernelmodule.mk
touch:sleep in atomic context
input: goodix_v1510: set regulator avdd load to 50mA
Do not set scan mode when setting charge mode
use request_threaded_irq to handle TP events.
focaltech_0flash: rm register_panel_notifier null define
bos0614_mmi: fix few bugs
input: focaltech_0flash_mmi: add panel notifications
Report BTN_TOUCH event when the fingers are lifted.
fet_control: banks: Enable only pm8350b chrg for usb2/3
sx937x: reset sar on i2c failures
update the charger_suspend config in charger configure
synaptics_mmi_class: fix broken build
berlNA: support usb detection of novatek TP.
Get usb status through POWER_SUPPLY_PROP_ONLINE property.
stmicro: Add USB detection based on touch class
ETS: Solve the compilation problem of androidR
Support TP report rate switching
regulator: wl2866d: support to read init value from dts
Resolve compilation errors for nio
Support touchscreen class for novatek
Move sysfs node to the parent of battery device
power: fet_control: Update paths on usb psy prop online
qrng: Add qrng driver
qti_glink_charger: Add sys node to pass TCMD to ADSP
qti_glink_charger: Add sys node to set pmic_icl
Resolve compilation errors with unused parameters "ret"
Resolve compilation errors with unused parameters
charge: add sc8549 driver for corfuP product
Export panel supplier method for ST
Use supplier to distinguish limit files.
power:fet_control: Batt flip dischg fet ctl, chg cur_en
qti_glink_charger: Add sys node to pass TCMD to ADSP
input: goodix_mmi: add goodix i2c 1510 version driver
qti_battery_charger_mmi: Initial add
bq25890_mmi: Fix power supply type
mmi_charger: Add voltage and current combos
driver:adjust bq25960 parameter
synaptics_mmi_class: gpio access func can sleep
Add calibrate sysfs node for stmicro TP.
synaptics_mmi_class: rename files
bq25960:remove online property
power:fet_control: banks flip batt fet-control driver
mmi_charger: Add ext_charger
bq25890: Add get/set for fcc and fv
Revert "(CR) synaptics_mmi_class: fix build issue"
bos0614_mmi: added features
synaptics_mmi_class: fix build issue
Support fw update at device startup for berlin.
fixup! (CR) synaptics_mmi_class: banks cli bringup
synaptics_mmi_class: banks cli bringup
smb:integrate charge pump ffc feature
stmicro_mmi: build and config ids
Remove pressure events
charger:bq25960 30w charger support
charger:enable charger rate at 30w charger
Enable irq during touch resume for berlin.
pstar: input touch stm fix issue
fixup! (CR) stmicro_mmi: bug fixes and new features
stmicro_mmi: bug fixes and new features
pstar: input touch fix disable irq panic
Get the profile id from device tree
Add new platfrom driver to support smb charger
Add change to be more compatible
Reorganize files to meet compilation mechanism on enabled GKI products.
aw8695: Fix compilation error of aw8695 for android R
Make Trustonic TEE driver module compatible with kernel 5.4.
mmi_parallel_charger:enable parallel charger at R
charge: Config charge rate for internal FG product
Charge: Config step first current comp for CP
Charge: config min tuning current
Charge: Clear err flag before start CP
mmi_parallel_charger: Add Turbo_30w power level
charge:notify smb5 while charge pump start working
dlkm: no need rerun aicl for odessa
dlkm: add enable CP api
mmi_parallel_charger: set charge_control_limit as writeable
mmi_parallel_charger: UI support for 45W charger
fg: soc report 99% lasted for long time
mmi_pl_chg: Add mmi_cycle_count to calculate batt age
mmi_parallel_charger: Add factory mode detect
mmi_pl_chg: clear pmic limit after remove pd power
mmi_parallel_charger: "battery" psy update PROP_STATUS
mmi_parallel_charger: optimize 45w charger policy
optimize the charging logic in thermal mitigation process
Improve the PD charging performance in high temperature
mmi_paralel_charger: Enhance the compatibility of PD charger
mmi_parallel_charger: enhance the stability of sm work
mmi_pl_chrg: improve the chrg recovery handling
mmi_chrg_manager: optimize thermal mitigation logic
mmi_pl_chrg: create some sysfs node for setting mmi_params
mmi_parallel_charger: optimize temp zone structure
mmi_parallel_charger: Optimize 40w charging logc, 1.0
mmi_parallel_charger: Optimize 40w charging policy
mmi_parallel_charger: Create Heartbeat work
DLKM: mmi_parallel_charger
pstar: input touch support cqa test
bq25890: commit initial version
bq27426: guard extra batt props
correct the charger present based on charger type
pstar: input touch stm bring up
dlkm: bo: Improve touch driver for novatek
bos0614_mmi: build kernel code
bos0614_mmi: initial reference driver
mmi_charger: Option to start with no factory kill
sx933x: handle reinitialize during suspend
pstar: input touch st bring up
charger:revert parallel charger driver
Update Trustonic TEE driver module to version 410a-V107
synaptics_i2c: Compilation errors
Revert "(CR) synaptics_mmi_class: banks cli bringup"
sec_mmi: fix regulator get/put
synaptics_mmi_class: banks cli bringup
kernel:charger rate duplicate with parallel charger
kernel:paralle charger driver
kernel:bq25980 charger driver
raydium_mmi: fix build error
uwb: sr100: add gpio-exp dep for banks
regulator: Add wl2866d driver.
ili9882_mmi: CQA test node update for tianma panel
nio: input touch add edge suppression
regulator: init all wl2864c register when probe driver
driver/GoodixFP Add the soft dependency of gpio-pcal6408
Add register dump interface for WL2864C
Revert "(CR): Add register dump interface for WL2864C.."
Adjust the charger configure data
Adjust charger configure data
Add register dump interface for WL2864C..
Fix compile errors for ilitek_0flash_mmi module
Fix deprecated function call on ilitek_0flash_mmi
regulator: modify wl2864c iovdd current limit
fpc1020: fix null pointer panic issue
exfat:Fix panic of handlings of unhashed alias
ili9882_mmi: support ili7806s IC
dlkm: Improve novatek touch process when using GKI
uwb: sr100: make clocks optional
uwb: sr100: allow cansleep gpio funcs
gpio: pcal6408: fix set output
qpnp-smbcharger-mmi: Add PD charging in DLKM
dlkm: sn1xx: fix tcmd ioctl error
DLKM: leds_aw99703: support update by panel config
sm4350/sensor: optimze sx937x log output
nio: input touch nova add delay for request fw retry
dlkm: fix free irq warning for chipone sensor
Charge: report battery power supply change
vl53l5: Support 32bit compatible Kernel driver for vl53l5
dlkm: fpc1020: free gpio when remove
Correct the config_id and build_id errors of focaltech IC
gpio: pcal6408: add initial module
Modify compilation error of synaptics
Modify compilation error of sec_mmi
Modify compilation error of stmicro
qpnp-smbcharger-mmi: Add charge_full_design in battery psy
mmi_sigprint: Fix CFI check failure
input: focaltech_v2_mmi: change some focal driver macros
synaptics_tcm_mmi: mmi status check
stmicro_mmi: mmi status check
sec_mmi: mmi status check
stmicro_mmi: identify product by chip id
stmicro_mmi: update driver to version 5.2.19
stmicro_mmi: use with touscreen class driver
input: touchscreen_mmi: add palm detection sensor class
input: focaltech_v2_mmi: add palm detection function
aw869xx: keep using default device name
dlkm: add qti_glink_charger driver
dlkm: charger driver for Moto common features
DLKM: mmi charging LKM must probe after qpnp smb5
DLKM: use new api in mmi-pmic-voter.c
Revert "(CR): DLKM: build error on user build"
module: remove useless code in charging LKM
input: focaltech_v2_mmi: enable single tap function
input: focaltech_v2_mmi: add usb charger detection
input: focaltech_v2_mmi: add sys node to upgrade firmware
mmi_sigprint: Use a new way to get kallsyms_lookup_name()
kernel:stop incresing vubs while charger plug out
usbnet: correct usb_ether_xmit return value
aw8695: Add start/stop vibrating notification to actuator.
usbnet: fix CFI checking failure
module: use orderly shutdown in factory mode
denver/sensor: update sarsensor params
module: add address and data api for tcmd
Chipone: Compatible with android R with 5.4.0
dlkm: bo: Improve novatek 0flash driver
FM: fix current leak on GPIO47
add mmi_relay notify interface by conditional
module: removed nonstandard props
qpnp-power-on-mmi: fix build error on user build
mmi: fix power supply change frequently
dlkm/qpnp-power-on-mmi: change vfs_write to kernel_write
ili9882_mmi: support panel gesture config
ets_fps_mmi: Register panel notifier for display on/off
input: focaltech_v2_mmi: Configure power supply
dlkm: bo: Support multi panel-supplier for novatek
DLKM/Sar:add abov 7ch driver
input: focaltech_v2_mmi: add V2 version of i2c focal driver
Register mmi_relay notification for touchscreen
Register mmi_relay notification for FOD
An common module used for all of module communication.
Revert "(CR): An common module used for all of module communication."
Revert "(CR): Register mmi_relay notification for FOD"
Revert "(CR): Register mmi_relay notification for touchscreen"
mmi_relay: Add gki flag to avoid module load failure
driver/sar-sensor: sx937x bring up
Register mmi_relay notification for touchscreen
Register mmi_relay notification for FOD
An common module used for all of module communication.
ili9882_mmi: deep sleep update with gesture config
nova_0flash_mmi: improve panel-supplier
ili9882_mmi: tp suspend improve
dlkm: bo: Support multi panel-supplier for novatek on 5.4.0
UWB bring up for driver
ili9882_mmi: improve RESUME_BY_DDI support
nova_0flash_mmi: add LCM_FAST_LIGHTUP support
Support tapTowake feature on android R for novatek
chipone_tddi_mmi: ICNL9911C and ESD improve
exfat: fix build err on user build.
chipone_tddi_mmi: support ICNL9911C
NFC driver mmi and DLKM support
driver/sar-sensor: build error on user build
driver/sar-sensor: sx937x bring up
Continue to probe touch even if no matching panel is found
DLKM: build error on user build
[capsensor] add debug support for cap sensor
Add 5ms delay for wl2864c ramp-up
driver/sar-sensor: build error on user build
dlkm: bo: Fixed compile error on android R
[capsensor] add debug info for read_rawdata
Ibiza: Touch ICNL9911C bringup
Revert "(CR): utags.ko: solve the unused remove_proc_subtree symbol definition"
Revert "(CR): utags.ko: force this module unloadable"
DLKM: disable update_now and usb_otg property
DLKM: bring up charging module
DLKM: submit the charging base code
watchdogtest: add qcom_wdt_trigger_bite for trigger wdog
exfat: workround end_buffer_async_write undefine issue in GKI 5.4
guamp: input touch fix esd lock issue
dlkm: chipone: fix build error on kernel 5.4
driver/sar-sensor: add sx937x base driver
hall: stylus bu520xx: Fix wakeup_source event API change
touch:nt36xxx: add ESD config
hall: stylus bu520xx: fix the compilation errors
mmi_info: export API for dynamically match mmi device
exfat:fixed exfat compliling failed on kernel 5.4
touch:nt36xxx: NT36525c improvement
touch:nt36xxx: support panel ic info
Force Trustonic TEE schedule run in Silver cores.
ili9882_mmi: capri txd/tm ili9882 touch bringup
Revert "(CR) ili9882_mmi: capri txd/tm ili9882 touch bringup"
ili9882_mmi: capri txd/tm ili9882 touch bringup
denver: modify wl2864c driver
touch:nt36xxx: support nt36525c
touch:nt36xxx:support panel config
dlkm: bo: Bringup touch driver for novatek
Modify the compilation error of the device_create function
Use alloc_chrdev_region instead of input_get_new_minor
the battery should be charged in taper-charger until iterm
dlkm: bo: Bringup touch driver for novatek
sx933x: Add a dummy flush function
sx9338: sar sensor bring up
Capri:Add compability of chipone driver
Capri:Add support for Chipone FPS
input: ilitek_0flash_mmi: change memcpy wlen value
Fixing factory kill function
Flip sign of current during taper check
Add battery profile v5
Print all Ra tables
watchdogtest: fix kallsyms_lookup_name issue in GKI 5.4
touchscreen_mmi: import correct Modules.symvers in GKI build mode
tzlog_dump: use ioremap to map ram from kernel 5.4
tzlog_dump: workaround msm_dump_data_register undefine issue in GKI 5.4
Add battery number to logging
fix ITPOR and CFGUPMODE logging
sec_mmi: import ANDROID_GKI_VFS_EXPORT_ONLY namespace for kernel_read
utags: import ANDROID_GKI_VFS_EXPORT_ONLY namespace for kernel_read
Refactoring code to use new wake API
himax_0flash: fix driver resume issue
focaltech_0flash_mmi: add reg log when tp not in normal mode
guam: input touch ilitek set deep sleep mode
Add Trustonic TEE driver module
input: ilitek_0flash_mmi: add ic_ver sys node for MotoCare
mmi_info: import correct Modules.symvers in GKI build mode
guam: input touch ilitek enable gesture
ili9882_mmi: fix build breakage on R
guam: input touch add ic_ver support
ets_fps: filter unexpected double-click event
mmi_info: add dependency of mmi_annotate module
qpnp-smbcharger-mmi: Charger Temp change adjust
utag: free the buffer when failed to open utag
utag: report the return value of store_utags() to userspace
guam: input update touch ilitek fw 02
Turn off the output log of the LSI touch FW raw data.
modify the compilation errors of goodix_berlin
sec_mmi: Don't USE_STUBS
restrict compilation for snd_soc_tfa9874
fixup! (CR): Instead of vfs_write with kernel_write
Instead of vfs_read with kernel_read
Revert "(CR): Instead of vfs_read with kernel_read"
Instead of vfs_read with kernel_read
Instead of vfs_write with kernel_write
synaptics prob if it matches the value of "mmi,panel_name"
Specify the dependency of the synaptics touchscreen modules.
Modify synaptics compile error on Viking.
Add CONFIG_DRM_PANEL_PANEL_NOTIFICATIONS on Viking
Determine whether to load by "mmi,panel_name"
touch: nt36xxx: Resolve include build error
Awinic: aw8624: Replace wakeup_source API with macro
touch: nt36xxx: Replace wakeup_source API with macro
pmic: Replace wakeup_source API with macro
mmi_wake_lock: Resolve malloc build error
Awinic: aw8695: Replace wakeup_source API with macro
Awinic: aw8697x: Replace wakeup_source API with macro
Awinic: aw8697: Replace wakeup_source API with macro
touch: synaptics: Replace wakeup_source API with macro
touch: focaltech: Replace wakeup_source API with macro
touch: sec_ts: Replace wakeup_source API with macro
touch: ilitek: Replace wakeup_source API with macro
touch: fts: Replace wakeup_source API with macro
misc: ets_fps: Replace wakeup_source API with macro
touch: synapticsi_dsx: Fix wakeup_source event API change
wakeup_source: Choose wakeup_source API based on version
aw8624: Fix build error due to wakeup API changes
nt36xxx: Fix build error due to wakeup API changes
Specify the dependency of sec_mmi on touchscreen_mmi
Slove the compile error of of_drm_find_panel function
himax_v2_mmi: fix build failure
Modify samsung compilation errors for viking.
Temporarily modify the value of device minor
Add mmi_bl_bootmode function to get boot mode.
Add DRM PANEL notifications to touchscreen
tas2562: fix build failure
input: ilitek_0flash_mmi: add usb charger detection
Modify touchscreen class compilation errors on Viking.
vl53l5: add stmvl53l5 init and deinit functions
vl53l5: initial version of vl53l5 sensor driver
usbnet: fix GKI compliance issue on sock access
dubai: bring up goodix fingerprint for android R
guam: input add touch ili9882n factory support
guam: input add touch ili9882n support
DLKM/Sar:remove CONFIG_CAPSENSE_CONTROL_VDD for borneo NA
DLKM:modify capsensor_enable_flag_t enum for abov
aw869xx: Fix build issue on Viking
aw869xx: Add awinic 869xx haptic driver
regulator: modify slg5bm43670 driver to support kernel 5.4
fir: update for coefficient read
cci: modify cci_intf driver to support kernel 5.4
DLKM:control VDD off when sar sensor is off
Modify the compilation error of ST touchscreen on Viking
guamna: input touch himax runin debug
aw8697: play weak haptic on implicit setup
aw8697: improve latency
synaptics_mmi_class: remove handler fix
fts: support touchscreen class
Sx933x:use ANDROID_BUILD_TOP in Kbuild
utags.ko: force this module unloadable
Revert "(CR): qpnp-smbchrgr-mmi: Optimize charger current over Temp"
fg: Add Golden Profiles v4
qpnp-smbchrgr-mmi: Optimize charger current over Temp
DLKM: himax_v2_mmi: fix compile error
AndroidKernelModule.mk: use Qcom dlkm file for GKI products
sec_mmi: add clip area
guamna: input fix touch himax allocate memory
Revert "(CR): AndroidKernelModule.mk: sync the file with qcom dlkm"
AndroidKernelModule.mk: sync the file with qcom dlkm
power: Fix build error due to wakeup API changes
aw8695: Fix build error due to wakeup API changes
ets_fps: Fix build error due to wakeup API changes
focaltech_0_flash: Fix build error due to wakeup API changes
focaltech_0_flash: Fix build error due to wakeup API changes
ets_fps: Fix build error due to wakeup API changes
aw8695: Fix build error due to wakeup API changes
power: Fix build error due to wakeup API changes
Initial goodix_berlin touchscreen driver code
touchscreen_mmi: fix undefined symbol error on kernel 5.4
mmi_sys_temp: use ANDROID_BUILD_TOP in Kbuild
exfat:fixed fs_error access null pointer
ikswq-123771: power: scale down initial chrg curr
sensor_class: use ANDROID_BUILD_TOP in Kbuild
mmi_info: use ANDROID_BUILD_TOP in Kbuild
mmi_annotate: vmap the physical ram in kernel 5.4
utags.ko: solve the unused remove_proc_subtree symbol definition
Egis.FPS Call early panel power-on when finger detected
guamp: input add touch ilitek support
nt36xx: Fix bld error due to wakeup_api_changes
focaltech_0_flash: fix bld error due to wakeup API changes
touch: nt36xxx: fix build error due to wakeup API changes
ets_fps: fix build error due to changes in the wakeup API
fix ST NFC driver compile error
power: Charge curr over adjustment- check both batts
power: Schedule 1sec smbchrg heartbeat when in ocp
guam: input update init drm callback timer
guam: input add touch ilitek support
synaptics_mmi_class: postpone loading functions
focaltech_0flash_mmi: ft fw file not found
focaltech_0flash_mmi:8006s_aa update irq config
input: touchscreen: Check buffer size
input: touchscreen: focaltech: fix pointer comparison
Kiev: Add usb detection based on touchscreen class
Initialize usb state when registering the usb notification
sx933x: reinitialize via i2c watchdog
Add SOH function
qpnp-smbcharger-mmi: Offer hvdcp_power_max setting by sysfs
sx933x: reset and re-init the device on i2c failures
power: Remove FG reset for factory bootmode
focaltech_0flash_mmi:8006s_aa enable irq when supspend
power: Remove FG reset check for factory sw build
Add macro definition to control unused code in Kiev
Kiev: ft8756:report touch events to touchscreen class
Double tap optimization
focaltech_0flash_mmi: fix tp recovery issue for fts8006s_aa
power: TI FG dm_ver3
aw8695:Ensure wakeup_source API is compatible for all kernels
aw8697: optimize sequencer registers write
aw8697: i2c transaction logging
aw8697: treat 100ms haptics as short vibration
fts: initial STmicro touch driver code
fixup! (CR): touch:Ensure wakeup_source API is compatible for all kernels
awinic:Ensure wakeup_source API is compatible for all kernels
touch:Ensure wakeup_source API is compatible for all kernels
pmic: Ensure wakeup_source API is compatible for all kernels
touch: Fix sec_ts build error due to wakeup_source API
Awinic: fix build error due to wakeup_source API's
touch: synaptics: Fix wakeup_source event API change
Power: fix implicit bld errs of wakeup_source API's
focaltech_0flash_mmi: Add ESD log config
power: smbcharger: Heartbeat Delay if FG reset incomplete
vl53l1: Make do_gettimeofday compatible to new Kernel version
usbnet: Use KERNEL_DS to replace get_ds() for compilation
Kiev: Add ft8756 single-tap wakeup gesture
Revert "(CR): Send the touchscreen status to display"
Send the touchscreen status to display
ITERM80 mA
DLKM: add ktd3136 backlight
Add sys node ic_ver and name
DLKM: ilitek_0flash_mmi: add ilitek driver patch for dma
input: ilitek_0flash_mmi: pull down reset when shutdown
focaltech_0flash_mmi: CONFIG_DRM_PANEL support
mmi_info: fix undefined symbol error on kernel 5.4
mmi_info: remove unexported symbol in kernel5.4
Kiev: Add touchscreen class for focaltech
fir: update the power manage logic
aw8624: Upgrade driver from 1.0.7 to 1.3.9
Change double tap interval for Egis FPS
input: ilitek_0flash_mmi: reset IC if esd recovery fail
Increment dm_ver
Fixup the definition of unregister_panel_notifier
focaltech_0flash_mmi: enable ESD for ft8006s_aa
KeivJP: bringup chipone fps driver
Added dts901b1 thermopile kernel module
input: ilitek_0flash_mmi: import some ili common changes
DLKM: leds_aw99703: change backlight type to Platform
Use kernel_definitions.mk if AndroidKernel.mk not existed
input: ilitek_0flash_mmi: resume touch by ddi
Add Golden Profiles from testing
input: ilitek_0flash_mmi: add support for single tap
qpnp-smbcharger-mmi: update ocp check
synaptics_mmi_class: handle delayed init
DLKM/sar:optimise process of sar to support 4 channels
aw8695: nairo: add 3 ATT ringtone waveforms
himax_v2_mmi: Add productinfo & buildid sys node
focaltech_0flash_mmi: support FT tp ft8006s_aa
Guam: input update touch chipone resume time
synaptics_mmi_class: panel ready handling
aw8697: Add "Moto Retro" to ringtone map
fg: Trigger POR in factory mode or factory software
DLKM: leds_aw99703: don't pull down enable pin again
racer 5G: aw8695: Add 3 new ringtone waveforms
aw8697: A fix of rtp playing from Awinic
aw8697: Stop repeatedly waveform playing
aw8697: Support repeatedly waveform playing
adjust factory image identification
guam: input add moto care support
aw8695: A fix of rtp playing from Awinic
aw8695: Cancel the 120s timer when stopping vibrating
aw8695: Stop repeatedly waveform playing
guam: input touch add class ic_ver support
dlkm: Add himax touch info node for Moto Care
Revert "(CR): modules: power: Add Adaptive Charging feature"
Revert "(CR): qpnp-smbcharger-mmi: Fix getting stuck in adaptive mode"
mmi_sys_temp: Add thermal sensors monitor work
dlkm: Add novatek touch info node for Moto Care
Add the judgment on gesture_enabled configuration in dtbo
Double tap optimization
aw8697: smith: Add boot-up vibration
synaptics_mmi_class: fix suspend/resume callbacks
Release touch events after suspend
Set the type of release event to the correct value.
dlkm: Improve himax_0flash_mmi for single tap
add dm_code ver 1 to both fg
p938x_charger: wake lock initialized too late
capsense: Add dummy set_poll_delay function
touchscreen_mmi: optimize poison event
synaptics_tcm_v2: Add touchscreen class handle touch event
touchscreen_mmi: Add poison slot support.
guam: input update touch chipone driver version
dlkm: bo: Clean up focaltech_0flash_8756_mmi
ilitek_0flash_mmi: add ili9881x initial driver
backlight: Add wleds driver aw99703
Nairobi hx83112f touch driver improvement
ASoC: aw882xx: set speaker default impedance value
aw8695: Support repeatedly waveform playing
Set the default value of gs_distance is 0x1e
Syna: Modify the baseline update process
touchscreen_mmi: do not lock in irq context
[Kiev]To support USB calibration
sx933x: update flip registers after init
sx933x: turn off sensing before flip updates
Add qpnp_adaptive_charge module
touchscreen_mmi: Properly handle the deletion process.
Add more configuration commands for FG
guam: input update touch himax driver
sec_mmi: show firmware version info
touchscreen_mmi: Control baseline update by FPS notifier
sec_mmi: Add update baseline method for lsi IC
touchscreen_mmi: Add update baseline entry
goodix_fod_mmi: Add device enable notifier chain
aw8697: Disable external triggers
touchscreen_mmi: selete on state when panel register.
Synaptics: Add hold-distance function, command is 0xdc.
synaptics: Add suppression control function
Report finger lift events after touch suspend.
synaptics_tcm_v2: Add wait_for_ready methord
touchscreen_mmi: Add default pinctrl methord
Solve NFC wake lock issue
touchscreen_mmi: exports touch events handler
Syna: Report down/up touch events to touchscreen class
touchscreen_mmi: qcom drm notifications support
sec_mmi: fix compile error
add panel_notifier.h to mmi kernel modules area
Syna: Modify the ratio of the major and minor values
guam: input update touch himax driver
input: himax_v2_mmi: Sync touch suspend and resume thread
input: himax_v2_mmi: set hx83012d only if defined
Set up common vendor id for fps
fg: Trigger POR through sysfs instead of factory mode
capsense sx933x recive headset state
ASoC: implement ICN control in TAS2562
Fail out of probe gracefully
smbcharger-mmi: Report turbo charging for wireless
p938x_charger: report fast charging if >= 15W
Revert "(CR): touchscreen_mmi: Do not write if value is same with cached"
Fix complilation error after removing -fno-builtin
qpnp-power-on-mmi: support hw_warmreset feature
fix 'rmmod ets_fps_mmi' error
Use touch class unified interface to support edge gesture
touchscreen_mmi: Do not write if value is same with cached
touchscreen_mmi: use try to call and try to read
touchscreen_mmi: update RW sys entry.
touchscreen_mmi: Only update refresh & charger when active
touchscreen_mmi: Add macro to get touch status
touchscreen_mmi: Add edge touch support
Revert "(CR) qpnp-power-on-mmi: support hw_warmreset feature" it will cause compile error on other mainline
qpnp-power-on-mmi: support hw_warmreset feature
touchscreen_mmi: Correctly Initialize temp cmd variable
sx933x: update registers on open/close
Reset fuel gauge in factory mode
Modify synaptics' log information
Add power flag to indicate power status.
dlkm: Himax 0Flash touch improvement
dlkm: Himax 0Flash touch improvement
dlkm: Himax 0Flash touch improvement
dlkm: Himax 0Flash touch improvement
ASoC: add aw882xx volume ramp function
exfat: use kvzalloc instead kzalloc in exfat_fill_super().
power: bq_27426_mmi: Add FG OCV voltage support
Syna: USB detection support
dlkm/sensor: optimize sx933x boot-time
Modify the value of synaptics major and minor
Solve resume and suspend confusion,causes touchscreen crash
Revert "(CR): exfat: use kvzalloc instead kzalloc in exfat_fill_super()."
exfat: use kvzalloc instead kzalloc in exfat_fill_super().
DLKM/sarsensor:add tcmd test interfaces for abov mmi
fixup! (CR): aw8697: Add error checking to RTP mode
fixup! (CR): goodix_gtx8_v1430_mmi: Port goodix v1.4.3.0 driver code
fixup! (CR): create mmi_info module
Pass absolute path of "TOP" to Kbuild.
ASoC: aw882xx:correct a property variate in parse dt
dlkm: Himax: Apply for new interface for single tap
himax: Compatible with the way of gesture to report key
ASoC: aw882xx driver update
support pill region and gs-distance support
dlkm: Improve himax_0flash_mmi
dlkm: Improve himax_0flash_mmi - continous
dlkm: Improve himax_0flash_mmi
motorola:qpnp-smbcharger-mmi Clean up commits
motorola:qpnp-smbcharger-mmi Delay first boot heartbeat
motorola:qpnp-smbcharger-mmi delay first heartbeat 10 seconds
dlkm: himax touch driver improvement
sx933x: Add generic usb/flip recal options
dlkm: Support the touch hx83112f for nairo
watchdogtest: replace msm_trigger_wdog_bite()
Add synaptics wakeup gesture handler
Syna: Modify the suspend and resume process.
Modify the disable-irq process in touchscreen class.
Allow for multiple batteries and multiple battery profiles
ASoC: monitor key registers in aw882xx
DLKM/sarsensor:optimise code for sar sensor of abov
guam: input add touch chipone fw
sec_mmi: mutual capacitance range interface
update CCI tools
nairobi/sensor: set CONFIG_CAPSENSE_USB_CAL
dlkm: ets_fps: Set up double tap feature
guam: add touch chipone support
Re-Enable DRM Event Notification
Solve the problem of charge mode setting when power off
racer 5G: aw8695: Add new ringtone waveform
dlkm: st21nfc: update driver
DLKM/sar: Add fw mode detection for A96T346HW.
mmi_sigprint: add death signal debug feature driver
DLKM/sar: Add fw mode detection for A96T346HW.
fixup! (CR) sec_mmi: support holding grip detection
SDM710: Reduce the spam charger related logs
Fixup! Check the value to be written
Check the value to be written
Add synaptics major and minor
sec_mmi: support holding grip detection
touchscreen_mmi: export class kobject
qpnp-smbcharger-mmi: Fix getting stuck in adaptive mode
sec_mmi: add grip supp distance register
sec_mmi: Fix default prop reset on resume
guam: add touch module support
fixup! (CR): Solve the problem of I2C error when power off
Solve the problem of I2C error when power off
fps: fixup kernel panic by calling input_free_device
FM: support elna module
input: himax_v2_mmi: change resume timing for hx83102d
sec_mmi: add hold distance register
dlkm: aw8695: fix enter standby mode failture
Revert:(CR):timeout to wait for wake lock at suspend
Support dts property to configure force device on option
modules: power: Update README document for bq27426 driver
modules: power: Build with battery profile header files
modules: power: Add battery profile files from TI
Revert "(CR) aw8697: boost ram loop mode playback"
Disable navigation in driver
sec_mmi: timeout to wait for wake lock at suspend
Take a long time to enter pre_suspended
modules: power: Add a long heartbeat delay for discharging
dlkm: Nairobi single tap bringup for TDDI
modules: power: Add Adaptive Charging feature
modules: power: Review SMBMMI log messages
dlkm: support 20W charger
ASoC: upgrade Aw882xx driver to v0.1.8
qpnp-smbcharger-mmi: Add POWER_SUPPLY_PROP_HOT_TEMP prop
p938x_charger: Reduce dc current if battery too hot
Modify the output format of the testing node
Update synaptics testiong code to V2.1
DLKM/sar:modify enable process of abov sar
DLKM/sar:optimise driver of Abov 5 channels
Racer_turbo: aw8697: Add new entry in ringtone array
sec_mmi: cleanup device tree parse logs
sec_mmi: add pill region support
Solve the power on problem of Synaptics touchscreen
Add touch suspend_noirq process
sec_mmi: report major and minor value in pixel unit.
Solve I2C error in the first suspend
p938x_charger: Force dcin-en on when attached
charge:real time check weak charge
aw8697: Add error checking to RTP mode
touchscreen_mmi: Modify the process of panel off and on
sec_mmi: add delay if power supply off
p938x_charger: protect fw flash and handle reboot case
touchscreen_mmi: secondary touch panel supplier
synaptics_mmi_class: fix firmware file name
Add Build Flags for Data Width Change
Add Data Width to CCI_intf
p938x_charger: Wait for LDO to report charging
p938x_charger: Update detection algorithm
fixup! (CR) sec_mmi: update Kbuild
synaptics_mmi_class: start using touchscreen_mmi class
touchscreen_mmi: match panel notifier with control dsi
synaptics_mmi: add touchscreen_mmi class check
sec_mmi: update Kbuild
sec_mmi: do not calibrate on firmware update
aw8697: Move RTP update work out of irq handler
p938x_charger: remove unneeded resets
p938x_charger: Remove thermal message print
add sar svdd regulator in kernel driver
Change dt-gesture sensor to SPECIAL_REPORTING mode
p938x_charger: Update tx mode fault handling
modules: power: Updating chg-iterm spec on documentation
sec_mmi: Get finger size from dts
sec_mmi: grip suppression control interface
p938x_charger: Update rx_connected with tx mode work
dlkm: ets_fps: fix build issue on kernel 4.19
p938x_charger: change tm mode address
p938x_charger: change the length of memcpy in fod_store
MMI: Add DC psy notifier
modules: power: Adding documentation to SMBMMI driver
modules: power: Change Heartbeat delay for fast mitigation
DLKM: Nairobi NT36672c touch bringup
Update driver version to 2.0.4
syna_tcm_mmi_v2: Fix build ID and config ID
Exfat:fix compile fail on kernel-4.19
aw8697: boost ram loop mode playback
input: himax_v2_mmi: change factory self test codes
regulator: modify slg5bm43670 to support interrupt
sec_mmi: Fix zero tap gesture coordinate.
ft8756: Compatible with the way of gesture to report key
novatek: Compatible with the way of gesture to report key
input: himax_v2_mmi: add hx83102d driver
ASoC: add Awinic aw882xx driver
regulator: Add wl2864c driver.
kernel/sar: update a96t driver to support two channel
Register touchscreen class of synaptics
input: focaltech_0flash: enable FTS_POINT_REPORT_CHECK_EN
racer: fix cci tools can not access cci-device-1
Racer5G: system crash when Synaptics shut dowm
motorola: drivers: Add logic to PD charger detection
regulator: separated slg51000 driver
drivers: slg51000: Prevent Driver from touching voltages
sec_mmi: single/zero tap report format change
[racer]sx933x: add usb recal for cap sense
modules:audio:tas2562:Turn off debug macro
touchscreen_mmi: create more sys entries
goodix_gtx8_v1430_mmi: Use i2c device to register ts_mmi
Set samsung touch screen name
Create the methods to get touchscreen class name
aw8697: Add moto ringtone array
touchscreen_mmi: use primary and secondary
touchscreen_mmi: usb detection
sec_mmi: touchscreen class based usb detection
touchscreen_mmi: generic gesture handling
sec_mmi: enhance class support
p938x_charger: add thermal cooling device
p938x_charger: add notify calls for hal
aw8697: Use RAM mode for long vibration
drivers: aw8697: fix kernel panic on RTP
fixup! (CR): fix unused function in user build
Sec_mmi firmware update
goodix_gtx8_v1430_mmi: register tp_mmi notification.
sec_mmi: add notification function
sec_mmi: Porting gesture handler to sec_mmi_class.
touchscreen_mmi: add notification function
p938x_charger: read current limits from dt
fixup! (CR): drivers: max170xx: fix reset on factory image
drivers: max170xx: reset on factory image
Show Panel supplier
sec_mmi: register a weak function to fix symbol issue
p938x_charger: Indicate online based on VRECT
sec_mmi: register moto touch class.
touchscreen_mmi: create extra sys entry group.
Synaptics updated driver code to V2
fixup! (CR) sec_mmi: fix format conversion
fixup! (CR) sec_mmi: fix format conversion
sec_mmi: fix format conversion
fixup! (CR) sec_mmi: wakeup gestures support
fixup! (CR) sec_mmi: wakeup gestures support
sec_mmi: wakeup gestures support
p938x_charger: program fod and q factor
Synaptics updated driver code to V2
goodix_gtx8_v1430_mmi: update fw in moto touch script.
goodix_gtx8_v1430_mmi: register moto touch class.
touchscreen_mmi: Add touchscreen class for moto product.
goodix_gtx8_v1430_mmi: support touchscreen_mmi.
Revert "(CR): ASoC: add APIs to access digital volume in tas25xx algo"
drivers: sx933x: add usb recal for cap sense
sec_mmi: make dynamic refresh rate optional
sec_mmi: force calibration on power up
sec_mmi: refresh rate update support
p938x_charger: read epp capabilities
ASoC: tas2562 digital volume
regulator: slg51000: Set SLG IRQ to trigger low.
Revert "(CR): MMI: Init batt health to GOOD"
aw8697: support moto vibrator feature
aw8697: decouple haptics and calibration wave forms
p938x_charger: Only turn off from usb when charger attached
fixup! (CR) sec_mmi: remove MMI_STOPSHIP
synaptics_mmi: fix clang errors
sec_mmi: remove MMI_STOPSHIP
ASoC: tas2558: add digital volume control
...
Conflicts:
Documentation/devicetree/bindings~HEAD
drivers/misc/Makefile
drivers/regulator/wl2868c/Makefile
drivers/regulator/wl2868c/wl2868c-regulator.c
drivers/regulator/wl2868c/wl2868c-regulator.h
drivers/sensors/Makefile
fs/exfat/Kconfig
fs/exfat/Makefile
fs/exfat/README.md
include/linux/input/synaptics_tcm.h
include/linux/panel_notifier.h
sound/soc/codecs/Makefile
Change-Id: Ida4ebbd91a32e29c78afe924d26e7ced3a6a42ed
8208bde4b8