* sm8250/lineage-20: arm64: efi: Switch to static_assert wrapper BACKPORT: build_bug.h: add wrapper for _Static_assert vidc: Return EBUSY if mbpf check fails Revert "qcacld-3.0: qca6390_defconfig: Enable desc debug check." Revert "qcacld-3.0: qca6390_defconfig: Enable power debug." GKI: config: FW_CACHE: remove duplicated CONFIG_FW_CACHE GKI: ARM: dts: msm: disable coresight for bengal/kona/lito defconfig: bengal/kona/lito: enable CONFIG_CC_WERROR kernel: Add CC_WERROR config to turn warnings into errors BACKPORT: media: venus: hfi: fix the check in session buffer requirement ASoC: bolero: Add check for CMPDR switch msm:vidc_3x: reject sessions based on max mbpf ASoC: wcd937x: Add flag to decide RX_MUTE for HPHL and EAR BACKPORT: blk-mq: fix is_flush_rq BACKPORT: blk-mq: clearing flush request reference in tags->rqs[] BACKPORT: blk-mq: clear stale request in tags->rq[] before freeing one request pool BACKPORT: blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter ARM: msm: Add board config support for 32 bit qcm2150 soc: qcom: socinfo: Add supprot for QCM2150 QRD soc-id msm: camera: sensor: Unmap DMA buffers to end access from kernel ASoC: msm-audio-effects-q6-v2: Add BPF order check dsp: q6afe: Add check for fbsp state dsp: q6asm: Add check for ADSP payload size ASoC: msm-pcm-host-voice: Check validity of session idx dsp: q6lsm: Address use after free for mmap handle ASoC: Resolve use after free in listen sound client dsp: q6lsm: Add check for payload buffer ASoC: msm-pcm-host-voice: Check validity of session idx dsp: q6lsm: Address use after free for mmap handle dsp: q6lsm: Add check for payload buffer ASoC: Resolve use after free in listen sound client ASoC: msm-lsm-client: Integer overflow check ASoC: dsp: q6core: Avoid use after free msm: camera: mem_mgr: release buffers after usage ASoC: msm-pcm-q6-v2: Add dsp buf check ASoC: msm-pcm-q6-v2: Add dsp buf check ARM: dts: msm: Add Dynamic FPS support for SKU4 ARM: dts: msm: Enable imx586 and imx686 for RB5 NonPop/M SOM msm: camera: smmu: Use get_file to increase ref count ARM: dts: qcom: Add apb_bclk to enable dcc ARM: dts: msm: enable esd check for xr sku4 platform Revert "ARM: dts: msm: Add GPU pwrlevels for KONA-7230" ARM: dts: msm: Add cluster ID to core hang DT node ARM: dts: msm: update bandwidth vote to nominal values for bengal bindings: leds: Add torch-realtime-brightness-control property ARM: dts: msm: disable splash and rdump region for 7230 ARM: dts: msm: add a dt property to restrict TPS4 pattern support ARM: dts: msm: Disable secondary usb controller for KONA-7230 ARM: dts: msm: Add GPU pwrlevels for KONA-7230 ARM: dts: msm: disable IPA entry for khaje APQ gaming targets ARM: dts: qcom: Disabling camera nodes for khajeg ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje ARM: dts: qcom: Add device tree support for Khaje IOT ARM: dts: qcom: Add second trip to skin-msm-therm-usr for sxr2130 ARM: dts: msm: Update MPM IPC register for khaje Revert "ARM: dts: msm: enable vsync-skew for SKU4 panel" ARM: dts: msm: Add gpio87 to PDC irq map for kona Revert "ARM: dts: msm: Remove IFE-Lite nodes" ARM: dts: msm: Configure PCIE2 for I210 Ethernet card ARM: dts: msm: Configure PCIE2 for I210 Ethernet card ARM: dts: msm: Configure PCIE2 for I210 Ethernet card ARM: dts: msm: Add configuration for ice driver in kona.dtsi ARM: dts: msm: enable vsync-skew for SKU4 panel ARM: dts: msm: Change the typical voltage for XR Reference devices ARM: dts: msm: configure dp as primary ARM: dts: msm: Remove IFE-Lite nodes ARM: dts: msm: dynamic aux config Revert "Revert "ARM: dts: msm: add dp support for rb5"" ARM: dts: msm: Add initial support for Nordic ARM: dts: msm: Add initial dts support for KONA-7230 Revert "ARM: dts: msm: add dp support for rb5" ARM: dts: msm: Add initial support for Nordic chip dt-bindings: add documentation for nordic-spicontroller ARM: dts: msm: update bias-voltage settings for display on bengal ARM: dts: msm: enable the 4-wire UART SE0 for QCS2290 ARM: dts: msm: Add 4-wire UART SE0 dt nodes for DIAG ARM: dts: msm: add dp support for rb5 ARM: dts: qcom: Add support sdm660-pm660a for SDM660 dt-bindings: add documentation for kinetics-nordic ARM: dts: msm: Keep DSC properties for non-XR Kona projects ARM: dts: msm: add wb clk status for kona target dt-bindings: usb: Add genoa extcon notifier driver description ARM: dts: msm: Change persistence on AR Display ARM: dts: msm: Increase timeout for ufs phy gdsc on kona msm: camera: memmgr: Update copyright fix ARM: dts: qcom: update the subtype ARM: dts: msm: Add device tree files for SCUBALITE ARM: dts: msm: Enable CVP SMMU fault tolerance and Stall disable ARM: dts: qcom: Add new device tree ARM: dts: msm: Switching back to 60FPS to XR2 AR Glass asoc: changes to fix KW errors. Change-Id: I8e8cd058e4cbe22d5547c108dcd0a091126361b2 |
||
---|---|---|
.. | ||
arc | ||
at91 | ||
bcm2835 | ||
brcmstb | ||
fsl | ||
imx | ||
mediatek | ||
nps | ||
qcom | ||
rockchip | ||
sa1100 | ||
tegra |