android_kernel_motorola_sm6225/arch/arm/mach-s3c2410/pm.c
Ben Dooks cdf3f8e038 [ARM] 3836/1: S3C24XX: Clear both EINT and INT status before sleep
Clear both the EINT and INT status before
going to sleep, otherwise we may end up being
woken by something that was not set in our
wakeup map.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:25:32 +01:00

659 lines
15 KiB
C

/* linux/arch/arm/mach-s3c2410/pm.c
*
* Copyright (c) 2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX Power Manager (Suspend-To-RAM) support
*
* See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Parts based on arch/arm/mach-pxa/pm.c
*
* Thanks to Dimitry Andric for debugging
*/
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/crc32.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <asm/cacheflush.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-irq.h>
#include <asm/mach/time.h>
#include "pm.h"
/* for external use */
unsigned long s3c_pm_flags;
#define PFX "s3c24xx-pm: "
static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_LOCKTIME),
SAVE_ITEM(S3C2410_CLKCON),
/* we restore the timings here, with the proviso that the board
* brings the system up in an slower, or equal frequency setting
* to the original system.
*
* if we cannot guarantee this, then things are going to go very
* wrong here, as we modify the refresh and both pll settings.
*/
SAVE_ITEM(S3C2410_BWSCON),
SAVE_ITEM(S3C2410_BANKCON0),
SAVE_ITEM(S3C2410_BANKCON1),
SAVE_ITEM(S3C2410_BANKCON2),
SAVE_ITEM(S3C2410_BANKCON3),
SAVE_ITEM(S3C2410_BANKCON4),
SAVE_ITEM(S3C2410_BANKCON5),
SAVE_ITEM(S3C2410_CLKDIVN),
SAVE_ITEM(S3C2410_MPLLCON),
SAVE_ITEM(S3C2410_UPLLCON),
SAVE_ITEM(S3C2410_CLKSLOW),
SAVE_ITEM(S3C2410_REFRESH),
};
static struct sleep_save gpio_save[] = {
SAVE_ITEM(S3C2410_GPACON),
SAVE_ITEM(S3C2410_GPADAT),
SAVE_ITEM(S3C2410_GPBCON),
SAVE_ITEM(S3C2410_GPBDAT),
SAVE_ITEM(S3C2410_GPBUP),
SAVE_ITEM(S3C2410_GPCCON),
SAVE_ITEM(S3C2410_GPCDAT),
SAVE_ITEM(S3C2410_GPCUP),
SAVE_ITEM(S3C2410_GPDCON),
SAVE_ITEM(S3C2410_GPDDAT),
SAVE_ITEM(S3C2410_GPDUP),
SAVE_ITEM(S3C2410_GPECON),
SAVE_ITEM(S3C2410_GPEDAT),
SAVE_ITEM(S3C2410_GPEUP),
SAVE_ITEM(S3C2410_GPFCON),
SAVE_ITEM(S3C2410_GPFDAT),
SAVE_ITEM(S3C2410_GPFUP),
SAVE_ITEM(S3C2410_GPGCON),
SAVE_ITEM(S3C2410_GPGDAT),
SAVE_ITEM(S3C2410_GPGUP),
SAVE_ITEM(S3C2410_GPHCON),
SAVE_ITEM(S3C2410_GPHDAT),
SAVE_ITEM(S3C2410_GPHUP),
SAVE_ITEM(S3C2410_DCLKCON),
};
#ifdef CONFIG_S3C2410_PM_DEBUG
#define SAVE_UART(va) \
SAVE_ITEM((va) + S3C2410_ULCON), \
SAVE_ITEM((va) + S3C2410_UCON), \
SAVE_ITEM((va) + S3C2410_UFCON), \
SAVE_ITEM((va) + S3C2410_UMCON), \
SAVE_ITEM((va) + S3C2410_UBRDIV)
static struct sleep_save uart_save[] = {
SAVE_UART(S3C24XX_VA_UART0),
SAVE_UART(S3C24XX_VA_UART1),
#ifndef CONFIG_CPU_S3C2400
SAVE_UART(S3C24XX_VA_UART2),
#endif
};
/* debug
*
* we send the debug to printascii() to allow it to be seen if the
* system never wakes up from the sleep
*/
extern void printascii(const char *);
void pm_dbg(const char *fmt, ...)
{
va_list va;
char buff[256];
va_start(va, fmt);
vsprintf(buff, fmt, va);
va_end(va);
printascii(buff);
}
static void s3c2410_pm_debug_init(void)
{
unsigned long tmp = __raw_readl(S3C2410_CLKCON);
/* re-start uart clocks */
tmp |= S3C2410_CLKCON_UART0;
tmp |= S3C2410_CLKCON_UART1;
tmp |= S3C2410_CLKCON_UART2;
__raw_writel(tmp, S3C2410_CLKCON);
udelay(10);
}
#define DBG(fmt...) pm_dbg(fmt)
#else
#define DBG(fmt...) printk(KERN_DEBUG fmt)
#define s3c2410_pm_debug_init() do { } while(0)
static struct sleep_save uart_save[] = {};
#endif
#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
/* suspend checking code...
*
* this next area does a set of crc checks over all the installed
* memory, so the system can verify if the resume was ok.
*
* CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
* increasing it will mean that the area corrupted will be less easy to spot,
* and reducing the size will cause the CRC save area to grow
*/
#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
static u32 crc_size; /* size needed for the crc block */
static u32 *crcs; /* allocated over suspend/resume */
typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
/* s3c2410_pm_run_res
*
* go thorugh the given resource list, and look for system ram
*/
static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
{
while (ptr != NULL) {
if (ptr->child != NULL)
s3c2410_pm_run_res(ptr->child, fn, arg);
if ((ptr->flags & IORESOURCE_MEM) &&
strcmp(ptr->name, "System RAM") == 0) {
DBG("Found system RAM at %08lx..%08lx\n",
ptr->start, ptr->end);
arg = (fn)(ptr, arg);
}
ptr = ptr->sibling;
}
}
static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
{
s3c2410_pm_run_res(&iomem_resource, fn, arg);
}
static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
{
u32 size = (u32)(res->end - res->start)+1;
size += CHECK_CHUNKSIZE-1;
size /= CHECK_CHUNKSIZE;
DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
*val += size * sizeof(u32);
return val;
}
/* s3c2410_pm_prepare_check
*
* prepare the necessary information for creating the CRCs. This
* must be done before the final save, as it will require memory
* allocating, and thus touching bits of the kernel we do not
* know about.
*/
static void s3c2410_pm_check_prepare(void)
{
crc_size = 0;
s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
crcs = kmalloc(crc_size+4, GFP_KERNEL);
if (crcs == NULL)
printk(KERN_ERR "Cannot allocated CRC save area\n");
}
static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
{
unsigned long addr, left;
for (addr = res->start; addr < res->end;
addr += CHECK_CHUNKSIZE) {
left = res->end - addr;
if (left > CHECK_CHUNKSIZE)
left = CHECK_CHUNKSIZE;
*val = crc32_le(~0, phys_to_virt(addr), left);
val++;
}
return val;
}
/* s3c2410_pm_check_store
*
* compute the CRC values for the memory blocks before the final
* sleep.
*/
static void s3c2410_pm_check_store(void)
{
if (crcs != NULL)
s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
}
/* in_region
*
* return TRUE if the area defined by ptr..ptr+size contatins the
* what..what+whatsz
*/
static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
{
if ((what+whatsz) < ptr)
return 0;
if (what > (ptr+size))
return 0;
return 1;
}
static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
{
void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
unsigned long addr;
unsigned long left;
void *ptr;
u32 calc;
for (addr = res->start; addr < res->end;
addr += CHECK_CHUNKSIZE) {
left = res->end - addr;
if (left > CHECK_CHUNKSIZE)
left = CHECK_CHUNKSIZE;
ptr = phys_to_virt(addr);
if (in_region(ptr, left, crcs, crc_size)) {
DBG("skipping %08lx, has crc block in\n", addr);
goto skip_check;
}
if (in_region(ptr, left, save_at, 32*4 )) {
DBG("skipping %08lx, has save block in\n", addr);
goto skip_check;
}
/* calculate and check the checksum */
calc = crc32_le(~0, ptr, left);
if (calc != *val) {
printk(KERN_ERR PFX "Restore CRC error at "
"%08lx (%08x vs %08x)\n", addr, calc, *val);
DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
addr, calc, *val);
}
skip_check:
val++;
}
return val;
}
/* s3c2410_pm_check_restore
*
* check the CRCs after the restore event and free the memory used
* to hold them
*/
static void s3c2410_pm_check_restore(void)
{
if (crcs != NULL) {
s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
kfree(crcs);
crcs = NULL;
}
}
#else
#define s3c2410_pm_check_prepare() do { } while(0)
#define s3c2410_pm_check_restore() do { } while(0)
#define s3c2410_pm_check_store() do { } while(0)
#endif
/* helper functions to save and restore register state */
void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++) {
ptr->val = __raw_readl(ptr->reg);
DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
}
}
/* s3c2410_pm_do_restore
*
* restore the system from the given list of saved registers
*
* Note, we do not use DBG() in here, as the system may not have
* restore the UARTs state yet
*/
void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++) {
printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
ptr->reg, ptr->val, __raw_readl(ptr->reg));
__raw_writel(ptr->val, ptr->reg);
}
}
/* s3c2410_pm_do_restore_core
*
* similar to s3c2410_pm_do_restore_core
*
* WARNING: Do not put any debug in here that may effect memory or use
* peripherals, as things may be changing!
*/
static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++) {
__raw_writel(ptr->val, ptr->reg);
}
}
/* s3c2410_pm_show_resume_irqs
*
* print any IRQs asserted at resume time (ie, we woke from)
*/
static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
unsigned long mask)
{
int i;
which &= ~mask;
for (i = 0; i <= 31; i++) {
if ((which) & (1L<<i)) {
DBG("IRQ %d asserted at resume\n", start+i);
}
}
}
/* s3c2410_pm_check_resume_pin
*
* check to see if the pin is configured correctly for sleep mode, and
* make any necessary adjustments if it is not
*/
static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
{
unsigned long irqstate;
unsigned long pinstate;
int irq = s3c2410_gpio_getirq(pin);
if (irqoffs < 4)
irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
else
irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
pinstate = s3c2410_gpio_getcfg(pin);
pinstate >>= S3C2410_GPIO_OFFSET(pin)*2;
if (!irqstate) {
if (pinstate == 0x02)
DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
} else {
if (pinstate == 0x02) {
DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
s3c2410_gpio_cfgpin(pin, 0x00);
}
}
}
/* s3c2410_pm_configure_extint
*
* configure all external interrupt pins
*/
static void s3c2410_pm_configure_extint(void)
{
int pin;
/* for each of the external interrupts (EINT0..EINT15) we
* need to check wether it is an external interrupt source,
* and then configure it as an input if it is not
*/
for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
}
for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
}
}
void (*pm_cpu_prep)(void);
void (*pm_cpu_sleep)(void);
#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
/* s3c2410_pm_enter
*
* central control for sleep/resume process
*/
static int s3c2410_pm_enter(suspend_state_t state)
{
unsigned long regs_save[16];
/* ensure the debug is initialised (if enabled) */
s3c2410_pm_debug_init();
DBG("s3c2410_pm_enter(%d)\n", state);
if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
return -EINVAL;
}
if (state != PM_SUSPEND_MEM) {
printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
return -EINVAL;
}
/* check if we have anything to wake-up with... bad things seem
* to happen if you suspend with no wakeup (system will often
* require a full power-cycle)
*/
if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
!any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
printk(KERN_ERR PFX "Aborting sleep\n");
return -EINVAL;
}
/* prepare check area if configured */
s3c2410_pm_check_prepare();
/* store the physical address of the register recovery block */
s3c2410_sleep_save_phys = virt_to_phys(regs_save);
DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
/* save all necessary core registers not covered by the drivers */
s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
/* set the irq configuration for wake */
s3c2410_pm_configure_extint();
DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
s3c_irqwake_intmask, s3c_irqwake_eintmask);
__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
/* ack any outstanding external interrupts before we go to sleep */
__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
/* call cpu specific preperation */
pm_cpu_prep();
/* flush cache back to ram */
flush_cache_all();
s3c2410_pm_check_store();
/* send the cpu to sleep... */
__raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
/* s3c2410_cpu_save will also act as our return point from when
* we resume as it saves its own register state, so use the return
* code to differentiate return from save and return from sleep */
if (s3c2410_cpu_save(regs_save) == 0) {
flush_cache_all();
pm_cpu_sleep();
}
/* restore the cpu state */
cpu_init();
/* restore the system state */
s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
s3c2410_pm_debug_init();
/* check what irq (if any) restored the system */
DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
__raw_readl(S3C2410_SRCPND),
__raw_readl(S3C2410_EINTPEND));
s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
s3c_irqwake_intmask);
s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
s3c_irqwake_eintmask);
DBG("post sleep, preparing to return\n");
s3c2410_pm_check_restore();
/* ok, let's return from sleep */
DBG("S3C2410 PM Resume (post-restore)\n");
return 0;
}
/*
* Called after processes are frozen, but before we shut down devices.
*/
static int s3c2410_pm_prepare(suspend_state_t state)
{
return 0;
}
/*
* Called after devices are re-setup, but before processes are thawed.
*/
static int s3c2410_pm_finish(suspend_state_t state)
{
return 0;
}
/*
* Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
*/
static struct pm_ops s3c2410_pm_ops = {
.pm_disk_mode = PM_DISK_FIRMWARE,
.prepare = s3c2410_pm_prepare,
.enter = s3c2410_pm_enter,
.finish = s3c2410_pm_finish,
};
/* s3c2410_pm_init
*
* Attach the power management functions. This should be called
* from the board specific initialisation if the board supports
* it.
*/
int __init s3c2410_pm_init(void)
{
printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
pm_set_ops(&s3c2410_pm_ops);
return 0;
}