1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
214 lines
6.2 KiB
C
214 lines
6.2 KiB
C
/*
|
|
* drivers/video/geode/display_gx1.c
|
|
* -- Geode GX1 display controller
|
|
*
|
|
* Copyright (C) 2005 Arcom Control Systems Ltd.
|
|
*
|
|
* Based on AMD's original 2.4 driver:
|
|
* Copyright (C) 2004 Advanced Micro Devices, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
#include <linux/spinlock.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/div64.h>
|
|
#include <asm/delay.h>
|
|
|
|
#include "geodefb.h"
|
|
#include "display_gx1.h"
|
|
|
|
static spinlock_t gx1_conf_reg_lock = SPIN_LOCK_UNLOCKED;
|
|
|
|
static u8 gx1_read_conf_reg(u8 reg)
|
|
{
|
|
u8 val, ccr3;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gx1_conf_reg_lock, flags);
|
|
|
|
outb(CONFIG_CCR3, 0x22);
|
|
ccr3 = inb(0x23);
|
|
outb(CONFIG_CCR3, 0x22);
|
|
outb(ccr3 | CONFIG_CCR3_MAPEN, 0x23);
|
|
outb(reg, 0x22);
|
|
val = inb(0x23);
|
|
outb(CONFIG_CCR3, 0x22);
|
|
outb(ccr3, 0x23);
|
|
|
|
spin_unlock_irqrestore(&gx1_conf_reg_lock, flags);
|
|
|
|
return val;
|
|
}
|
|
|
|
unsigned gx1_gx_base(void)
|
|
{
|
|
return (gx1_read_conf_reg(CONFIG_GCR) & 0x03) << 30;
|
|
}
|
|
|
|
int gx1_frame_buffer_size(void)
|
|
{
|
|
void __iomem *mc_regs;
|
|
u32 bank_cfg;
|
|
int d;
|
|
unsigned dram_size = 0, fb_base;
|
|
|
|
mc_regs = ioremap(gx1_gx_base() + 0x8400, 0x100);
|
|
if (!mc_regs)
|
|
return -ENOMEM;
|
|
|
|
|
|
/* Calculate the total size of both DIMM0 and DIMM1. */
|
|
bank_cfg = readl(mc_regs + MC_BANK_CFG);
|
|
|
|
for (d = 0; d < 2; d++) {
|
|
if ((bank_cfg & MC_BCFG_DIMM0_PG_SZ_MASK) != MC_BCFG_DIMM0_PG_SZ_NO_DIMM)
|
|
dram_size += 0x400000 << ((bank_cfg & MC_BCFG_DIMM0_SZ_MASK) >> 8);
|
|
bank_cfg >>= 16; /* look at DIMM1 next */
|
|
}
|
|
|
|
fb_base = (readl(mc_regs + MC_GBASE_ADD) & MC_GADD_GBADD_MASK) << 19;
|
|
|
|
iounmap(mc_regs);
|
|
|
|
return dram_size - fb_base;
|
|
}
|
|
|
|
static void gx1_set_mode(struct fb_info *info)
|
|
{
|
|
struct geodefb_par *par = info->par;
|
|
u32 gcfg, tcfg, ocfg, dclk_div, val;
|
|
int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
|
|
int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
|
|
|
|
/* Unlock the display controller registers. */
|
|
readl(par->dc_regs + DC_UNLOCK);
|
|
writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
|
|
|
|
gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
|
|
tcfg = readl(par->dc_regs + DC_TIMING_CFG);
|
|
|
|
/* Blank the display and disable the timing generator. */
|
|
tcfg &= ~(DC_TCFG_BLKE | DC_TCFG_TGEN);
|
|
writel(tcfg, par->dc_regs + DC_TIMING_CFG);
|
|
|
|
/* Wait for pending memory requests before disabling the FIFO load. */
|
|
udelay(100);
|
|
|
|
/* Disable FIFO load and compression. */
|
|
gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
|
|
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
|
|
|
|
/* Setup DCLK and its divisor. */
|
|
gcfg &= ~DC_GCFG_DCLK_MASK;
|
|
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
|
|
|
|
par->vid_ops->set_dclk(info);
|
|
|
|
dclk_div = DC_GCFG_DCLK_DIV_1; /* FIXME: may need to divide DCLK by 2 sometimes? */
|
|
gcfg |= dclk_div;
|
|
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
|
|
|
|
/* Wait for the clock generatation to settle. This is needed since
|
|
* some of the register writes that follow require that clock to be
|
|
* present. */
|
|
udelay(1000); /* FIXME: seems a little long */
|
|
|
|
/*
|
|
* Setup new mode.
|
|
*/
|
|
|
|
/* Clear all unused feature bits. */
|
|
gcfg = DC_GCFG_VRDY | dclk_div;
|
|
|
|
/* Set FIFO priority (default 6/5) and enable. */
|
|
/* FIXME: increase fifo priority for 1280x1024 modes? */
|
|
gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
|
|
|
|
/* FIXME: Set pixel and line double bits if necessary. */
|
|
|
|
/* Framebuffer start offset. */
|
|
writel(0, par->dc_regs + DC_FB_ST_OFFSET);
|
|
|
|
/* Line delta and line buffer length. */
|
|
writel(info->fix.line_length >> 2, par->dc_regs + DC_LINE_DELTA);
|
|
writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
|
|
par->dc_regs + DC_BUF_SIZE);
|
|
|
|
/* Output configuration. Enable panel data, set pixel format. */
|
|
ocfg = DC_OCFG_PCKE | DC_OCFG_PDEL | DC_OCFG_PDEH;
|
|
if (info->var.bits_per_pixel == 8) ocfg |= DC_OCFG_8BPP;
|
|
|
|
/* Enable timing generator, sync and FP data. */
|
|
tcfg = DC_TCFG_FPPE | DC_TCFG_HSYE | DC_TCFG_VSYE | DC_TCFG_BLKE
|
|
| DC_TCFG_TGEN;
|
|
|
|
/* Horizontal and vertical timings. */
|
|
hactive = info->var.xres;
|
|
hblankstart = hactive;
|
|
hsyncstart = hblankstart + info->var.right_margin;
|
|
hsyncend = hsyncstart + info->var.hsync_len;
|
|
hblankend = hsyncend + info->var.left_margin;
|
|
htotal = hblankend;
|
|
|
|
vactive = info->var.yres;
|
|
vblankstart = vactive;
|
|
vsyncstart = vblankstart + info->var.lower_margin;
|
|
vsyncend = vsyncstart + info->var.vsync_len;
|
|
vblankend = vsyncend + info->var.upper_margin;
|
|
vtotal = vblankend;
|
|
|
|
val = (hactive - 1) | ((htotal - 1) << 16);
|
|
writel(val, par->dc_regs + DC_H_TIMING_1);
|
|
val = (hblankstart - 1) | ((hblankend - 1) << 16);
|
|
writel(val, par->dc_regs + DC_H_TIMING_2);
|
|
val = (hsyncstart - 1) | ((hsyncend - 1) << 16);
|
|
writel(val, par->dc_regs + DC_H_TIMING_3);
|
|
writel(val, par->dc_regs + DC_FP_H_TIMING);
|
|
val = (vactive - 1) | ((vtotal - 1) << 16);
|
|
writel(val, par->dc_regs + DC_V_TIMING_1);
|
|
val = (vblankstart - 1) | ((vblankend - 1) << 16);
|
|
writel(val, par->dc_regs + DC_V_TIMING_2);
|
|
val = (vsyncstart - 1) | ((vsyncend - 1) << 16);
|
|
writel(val, par->dc_regs + DC_V_TIMING_3);
|
|
val = (vsyncstart - 2) | ((vsyncend - 2) << 16);
|
|
writel(val, par->dc_regs + DC_FP_V_TIMING);
|
|
|
|
/* Write final register values. */
|
|
writel(ocfg, par->dc_regs + DC_OUTPUT_CFG);
|
|
writel(tcfg, par->dc_regs + DC_TIMING_CFG);
|
|
udelay(1000); /* delay after TIMING_CFG. FIXME: perhaps a little long */
|
|
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
|
|
|
|
par->vid_ops->configure_display(info);
|
|
|
|
/* Relock display controller registers */
|
|
writel(0, par->dc_regs + DC_UNLOCK);
|
|
|
|
/* FIXME: write line_length and bpp to Graphics Pipeline GP_BLT_STATUS
|
|
* register. */
|
|
}
|
|
|
|
static void gx1_set_hw_palette_reg(struct fb_info *info, unsigned regno,
|
|
unsigned red, unsigned green, unsigned blue)
|
|
{
|
|
struct geodefb_par *par = info->par;
|
|
int val;
|
|
|
|
/* Hardware palette is in RGB 6-6-6 format. */
|
|
val = (red << 2) & 0x3f000;
|
|
val |= (green >> 4) & 0x00fc0;
|
|
val |= (blue >> 10) & 0x0003f;
|
|
|
|
writel(regno, par->dc_regs + DC_PAL_ADDRESS);
|
|
writel(val, par->dc_regs + DC_PAL_DATA);
|
|
}
|
|
|
|
struct geode_dc_ops gx1_dc_ops = {
|
|
.set_mode = gx1_set_mode,
|
|
.set_palette_reg = gx1_set_hw_palette_reg,
|
|
};
|