android_kernel_motorola_sm6225/drivers/w1/slaves/w1_ds2760.h
Daniel Mack 0b47b5703b w1: ds2760: add support for EEPROM read and write
In order to modify the DS2762's status registers and to add support for
sleep mode, there is need for functions to write the internal EEPROM.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-06-08 23:25:17 +04:00

52 lines
1.6 KiB
C

/*
* 1-Wire implementation for the ds2760 chip
*
* Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
* preserved in its entirety in all copies and derived works.
*
*/
#ifndef __w1_ds2760_h__
#define __w1_ds2760_h__
/* Known commands to the DS2760 chip */
#define W1_DS2760_SWAP 0xAA
#define W1_DS2760_READ_DATA 0x69
#define W1_DS2760_WRITE_DATA 0x6C
#define W1_DS2760_COPY_DATA 0x48
#define W1_DS2760_RECALL_DATA 0xB8
#define W1_DS2760_LOCK 0x6A
/* Number of valid register addresses */
#define DS2760_DATA_SIZE 0x40
#define DS2760_PROTECTION_REG 0x00
#define DS2760_STATUS_REG 0x01
#define DS2760_EEPROM_REG 0x07
#define DS2760_SPECIAL_FEATURE_REG 0x08
#define DS2760_VOLTAGE_MSB 0x0c
#define DS2760_VOLTAGE_LSB 0x0d
#define DS2760_CURRENT_MSB 0x0e
#define DS2760_CURRENT_LSB 0x0f
#define DS2760_CURRENT_ACCUM_MSB 0x10
#define DS2760_CURRENT_ACCUM_LSB 0x11
#define DS2760_TEMP_MSB 0x18
#define DS2760_TEMP_LSB 0x19
#define DS2760_EEPROM_BLOCK0 0x20
#define DS2760_ACTIVE_FULL 0x20
#define DS2760_EEPROM_BLOCK1 0x30
#define DS2760_RATED_CAPACITY 0x32
#define DS2760_CURRENT_OFFSET_BIAS 0x33
#define DS2760_ACTIVE_EMPTY 0x3b
extern int w1_ds2760_read(struct device *dev, char *buf, int addr,
size_t count);
extern int w1_ds2760_write(struct device *dev, char *buf, int addr,
size_t count);
extern int w1_ds2760_store_eeprom(struct device *dev, int addr);
extern int w1_ds2760_recall_eeprom(struct device *dev, int addr);
#endif /* !__w1_ds2760_h__ */