android_kernel_motorola_sm6225/include/linux/pktcdvd.h
Phillip Susi 5c55ac9bbc [PATCH] pktcdvd: Allow larger packets
The pktcdvd driver uses a compile time macro constant to define the maximum
supported packet length.  I changed this from 32 sectors to 128 sectors
because that allows over 100 MB of additional usable space on a 700 MB cdrw,
and increases throughput.

Note that you need a modified cdrwtool program that can format a CDRW disc
with larger packets to benefit from this change.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05 11:06:52 -08:00

278 lines
7.4 KiB
C

/*
* Copyright (C) 2000 Jens Axboe <axboe@suse.de>
* Copyright (C) 2001-2004 Peter Osterlund <petero2@telia.com>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* Packet writing layer for ATAPI and SCSI CD-R, CD-RW, DVD-R, and
* DVD-RW devices.
*
*/
#ifndef __PKTCDVD_H
#define __PKTCDVD_H
#include <linux/types.h>
/*
* 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
*/
#define PACKET_DEBUG 1
#define MAX_WRITERS 8
#define PKT_RB_POOL_SIZE 512
/*
* How long we should hold a non-full packet before starting data gathering.
*/
#define PACKET_WAIT_TIME (HZ * 5 / 1000)
/*
* use drive write caching -- we need deferred error handling to be
* able to sucessfully recover with this option (drive will return good
* status as soon as the cdb is validated).
*/
#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
#define USE_WCACHING 1
#else
#define USE_WCACHING 0
#endif
/*
* No user-servicable parts beyond this point ->
*/
/*
* device types
*/
#define PACKET_CDR 1
#define PACKET_CDRW 2
#define PACKET_DVDR 3
#define PACKET_DVDRW 4
/*
* flags
*/
#define PACKET_WRITABLE 1 /* pd is writable */
#define PACKET_NWA_VALID 2 /* next writable address valid */
#define PACKET_LRA_VALID 3 /* last recorded address valid */
#define PACKET_MERGE_SEGS 4 /* perform segment merging to keep */
/* underlying cdrom device happy */
/*
* Disc status -- from READ_DISC_INFO
*/
#define PACKET_DISC_EMPTY 0
#define PACKET_DISC_INCOMPLETE 1
#define PACKET_DISC_COMPLETE 2
#define PACKET_DISC_OTHER 3
/*
* write type, and corresponding data block type
*/
#define PACKET_MODE1 1
#define PACKET_MODE2 2
#define PACKET_BLOCK_MODE1 8
#define PACKET_BLOCK_MODE2 10
/*
* Last session/border status
*/
#define PACKET_SESSION_EMPTY 0
#define PACKET_SESSION_INCOMPLETE 1
#define PACKET_SESSION_RESERVED 2
#define PACKET_SESSION_COMPLETE 3
#define PACKET_MCN "4a656e734178626f65323030300000"
#undef PACKET_USE_LS
#define PKT_CTRL_CMD_SETUP 0
#define PKT_CTRL_CMD_TEARDOWN 1
#define PKT_CTRL_CMD_STATUS 2
struct pkt_ctrl_command {
__u32 command; /* in: Setup, teardown, status */
__u32 dev_index; /* in/out: Device index */
__u32 dev; /* in/out: Device nr for cdrw device */
__u32 pkt_dev; /* in/out: Device nr for packet device */
__u32 num_devices; /* out: Largest device index + 1 */
__u32 padding; /* Not used */
};
/*
* packet ioctls
*/
#define PACKET_IOCTL_MAGIC ('X')
#define PACKET_CTRL_CMD _IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
#ifdef __KERNEL__
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/cdrom.h>
struct packet_settings
{
__u32 size; /* packet size in (512 byte) sectors */
__u8 fp; /* fixed packets */
__u8 link_loss; /* the rest is specified
* as per Mt Fuji */
__u8 write_type;
__u8 track_mode;
__u8 block_mode;
};
/*
* Very crude stats for now
*/
struct packet_stats
{
unsigned long pkt_started;
unsigned long pkt_ended;
unsigned long secs_w;
unsigned long secs_rg;
unsigned long secs_r;
};
struct packet_cdrw
{
struct list_head pkt_free_list;
struct list_head pkt_active_list;
spinlock_t active_list_lock; /* Serialize access to pkt_active_list */
struct task_struct *thread;
atomic_t pending_bios;
};
/*
* Switch to high speed reading after reading this many kilobytes
* with no interspersed writes.
*/
#define HI_SPEED_SWITCH 512
struct packet_iosched
{
atomic_t attention; /* Set to non-zero when queue processing is needed */
int writing; /* Non-zero when writing, zero when reading */
spinlock_t lock; /* Protecting read/write queue manipulations */
struct bio *read_queue;
struct bio *read_queue_tail;
struct bio *write_queue;
struct bio *write_queue_tail;
sector_t last_write; /* The sector where the last write ended */
int successive_reads;
};
/*
* 32 buffers of 2048 bytes
*/
#if (PAGE_SIZE % CD_FRAMESIZE) != 0
#error "PAGE_SIZE must be a multiple of CD_FRAMESIZE"
#endif
#define PACKET_MAX_SIZE 128
#define FRAMES_PER_PAGE (PAGE_SIZE / CD_FRAMESIZE)
#define PACKET_MAX_SECTORS (PACKET_MAX_SIZE * CD_FRAMESIZE >> 9)
enum packet_data_state {
PACKET_IDLE_STATE, /* Not used at the moment */
PACKET_WAITING_STATE, /* Waiting for more bios to arrive, so */
/* we don't have to do as much */
/* data gathering */
PACKET_READ_WAIT_STATE, /* Waiting for reads to fill in holes */
PACKET_WRITE_WAIT_STATE, /* Waiting for the write to complete */
PACKET_RECOVERY_STATE, /* Recover after read/write errors */
PACKET_FINISHED_STATE, /* After write has finished */
PACKET_NUM_STATES /* Number of possible states */
};
/*
* Information needed for writing a single packet
*/
struct pktcdvd_device;
struct packet_data
{
struct list_head list;
spinlock_t lock; /* Lock protecting state transitions and */
/* orig_bios list */
struct bio *orig_bios; /* Original bios passed to pkt_make_request */
struct bio *orig_bios_tail;/* that will be handled by this packet */
int write_size; /* Total size of all bios in the orig_bios */
/* list, measured in number of frames */
struct bio *w_bio; /* The bio we will send to the real CD */
/* device once we have all data for the */
/* packet we are going to write */
sector_t sector; /* First sector in this packet */
int frames; /* Number of frames in this packet */
enum packet_data_state state; /* Current state */
atomic_t run_sm; /* Incremented whenever the state */
/* machine needs to be run */
long sleep_time; /* Set this to non-zero to make the state */
/* machine run after this many jiffies. */
atomic_t io_wait; /* Number of pending IO operations */
atomic_t io_errors; /* Number of read/write errors during IO */
struct bio *r_bios[PACKET_MAX_SIZE]; /* bios to use during data gathering */
struct page *pages[PACKET_MAX_SIZE / FRAMES_PER_PAGE];
int cache_valid; /* If non-zero, the data for the zone defined */
/* by the sector variable is completely cached */
/* in the pages[] vector. */
int id; /* ID number for debugging */
struct pktcdvd_device *pd;
};
struct pkt_rb_node {
struct rb_node rb_node;
struct bio *bio;
};
struct packet_stacked_data
{
struct bio *bio; /* Original read request bio */
struct pktcdvd_device *pd;
};
#define PSD_POOL_SIZE 64
struct pktcdvd_device
{
struct block_device *bdev; /* dev attached */
dev_t pkt_dev; /* our dev */
char name[20];
struct packet_settings settings;
struct packet_stats stats;
int refcnt; /* Open count */
int write_speed; /* current write speed, kB/s */
int read_speed; /* current read speed, kB/s */
unsigned long offset; /* start offset */
__u8 mode_offset; /* 0 / 8 */
__u8 type;
unsigned long flags;
__u16 mmc3_profile;
__u32 nwa; /* next writable address */
__u32 lra; /* last recorded address */
struct packet_cdrw cdrw;
wait_queue_head_t wqueue;
spinlock_t lock; /* Serialize access to bio_queue */
struct rb_root bio_queue; /* Work queue of bios we need to handle */
int bio_queue_size; /* Number of nodes in bio_queue */
sector_t current_sector; /* Keep track of where the elevator is */
atomic_t scan_queue; /* Set to non-zero when pkt_handle_queue */
/* needs to be run. */
mempool_t *rb_pool; /* mempool for pkt_rb_node allocations */
struct packet_iosched iosched;
struct gendisk *disk;
};
#endif /* __KERNEL__ */
#endif /* __PKTCDVD_H */