17e476b8db
This patch adds translation for the RX status of an incoming packet. The incoming status has to be translated to the old scheme in order to know if the decryption has been done, MIC failure has occured, TTAK is valid etc... This translation is mandatory for all RX packets when using 5300 and for all HT packets using 4965. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2690 lines
95 KiB
C
2690 lines
95 KiB
C
/******************************************************************************
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
|
|
* USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* Contact Information:
|
|
* James P. Ketrenos <ipw2100-admin@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*****************************************************************************/
|
|
/*
|
|
* Please use this file (iwl-4965-commands.h) only for uCode API definitions.
|
|
* Please use iwl-4965-hw.h for hardware-related definitions.
|
|
* Please use iwl-4965.h for driver implementation definitions.
|
|
*/
|
|
|
|
#ifndef __iwl4965_commands_h__
|
|
#define __iwl4965_commands_h__
|
|
|
|
enum {
|
|
REPLY_ALIVE = 0x1,
|
|
REPLY_ERROR = 0x2,
|
|
|
|
/* RXON and QOS commands */
|
|
REPLY_RXON = 0x10,
|
|
REPLY_RXON_ASSOC = 0x11,
|
|
REPLY_QOS_PARAM = 0x13,
|
|
REPLY_RXON_TIMING = 0x14,
|
|
|
|
/* Multi-Station support */
|
|
REPLY_ADD_STA = 0x18,
|
|
REPLY_REMOVE_STA = 0x19, /* not used */
|
|
REPLY_REMOVE_ALL_STA = 0x1a, /* not used */
|
|
|
|
/* RX, TX, LEDs */
|
|
REPLY_TX = 0x1c,
|
|
REPLY_RATE_SCALE = 0x47, /* 3945 only */
|
|
REPLY_LEDS_CMD = 0x48,
|
|
REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */
|
|
|
|
/* 802.11h related */
|
|
RADAR_NOTIFICATION = 0x70, /* not used */
|
|
REPLY_QUIET_CMD = 0x71, /* not used */
|
|
REPLY_CHANNEL_SWITCH = 0x72,
|
|
CHANNEL_SWITCH_NOTIFICATION = 0x73,
|
|
REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74,
|
|
SPECTRUM_MEASURE_NOTIFICATION = 0x75,
|
|
|
|
/* Power Management */
|
|
POWER_TABLE_CMD = 0x77,
|
|
PM_SLEEP_NOTIFICATION = 0x7A,
|
|
PM_DEBUG_STATISTIC_NOTIFIC = 0x7B,
|
|
|
|
/* Scan commands and notifications */
|
|
REPLY_SCAN_CMD = 0x80,
|
|
REPLY_SCAN_ABORT_CMD = 0x81,
|
|
SCAN_START_NOTIFICATION = 0x82,
|
|
SCAN_RESULTS_NOTIFICATION = 0x83,
|
|
SCAN_COMPLETE_NOTIFICATION = 0x84,
|
|
|
|
/* IBSS/AP commands */
|
|
BEACON_NOTIFICATION = 0x90,
|
|
REPLY_TX_BEACON = 0x91,
|
|
WHO_IS_AWAKE_NOTIFICATION = 0x94, /* not used */
|
|
|
|
/* Miscellaneous commands */
|
|
QUIET_NOTIFICATION = 0x96, /* not used */
|
|
REPLY_TX_PWR_TABLE_CMD = 0x97,
|
|
MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */
|
|
|
|
/* Bluetooth device coexistance config command */
|
|
REPLY_BT_CONFIG = 0x9b,
|
|
|
|
/* Statistics */
|
|
REPLY_STATISTICS_CMD = 0x9c,
|
|
STATISTICS_NOTIFICATION = 0x9d,
|
|
|
|
/* RF-KILL commands and notifications */
|
|
REPLY_CARD_STATE_CMD = 0xa0,
|
|
CARD_STATE_NOTIFICATION = 0xa1,
|
|
|
|
/* Missed beacons notification */
|
|
MISSED_BEACONS_NOTIFICATION = 0xa2,
|
|
|
|
REPLY_CT_KILL_CONFIG_CMD = 0xa4,
|
|
SENSITIVITY_CMD = 0xa8,
|
|
REPLY_PHY_CALIBRATION_CMD = 0xb0,
|
|
REPLY_RX_PHY_CMD = 0xc0,
|
|
REPLY_RX_MPDU_CMD = 0xc1,
|
|
REPLY_4965_RX = 0xc3,
|
|
REPLY_COMPRESSED_BA = 0xc5,
|
|
REPLY_MAX = 0xff
|
|
};
|
|
|
|
/******************************************************************************
|
|
* (0)
|
|
* Commonly used structures and definitions:
|
|
* Command header, rate_n_flags, txpower
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/* iwl4965_cmd_header flags value */
|
|
#define IWL_CMD_FAILED_MSK 0x40
|
|
|
|
/**
|
|
* struct iwl4965_cmd_header
|
|
*
|
|
* This header format appears in the beginning of each command sent from the
|
|
* driver, and each response/notification received from uCode.
|
|
*/
|
|
struct iwl4965_cmd_header {
|
|
u8 cmd; /* Command ID: REPLY_RXON, etc. */
|
|
u8 flags; /* IWL_CMD_* */
|
|
/*
|
|
* The driver sets up the sequence number to values of its chosing.
|
|
* uCode does not use this value, but passes it back to the driver
|
|
* when sending the response to each driver-originated command, so
|
|
* the driver can match the response to the command. Since the values
|
|
* don't get used by uCode, the driver may set up an arbitrary format.
|
|
*
|
|
* There is one exception: uCode sets bit 15 when it originates
|
|
* the response/notification, i.e. when the response/notification
|
|
* is not a direct response to a command sent by the driver. For
|
|
* example, uCode issues REPLY_3945_RX when it sends a received frame
|
|
* to the driver; it is not a direct response to any driver command.
|
|
*
|
|
* The Linux driver uses the following format:
|
|
*
|
|
* 0:7 index/position within Tx queue
|
|
* 8:13 Tx queue selection
|
|
* 14:14 driver sets this to indicate command is in the 'huge'
|
|
* storage at the end of the command buffers, i.e. scan cmd
|
|
* 15:15 uCode sets this in uCode-originated response/notification
|
|
*/
|
|
__le16 sequence;
|
|
|
|
/* command or response/notification data follows immediately */
|
|
u8 data[0];
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* 4965 rate_n_flags bit fields
|
|
*
|
|
* rate_n_flags format is used in following 4965 commands:
|
|
* REPLY_4965_RX (response only)
|
|
* REPLY_TX (both command and response)
|
|
* REPLY_TX_LINK_QUALITY_CMD
|
|
*
|
|
* High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"):
|
|
* 2-0: 0) 6 Mbps
|
|
* 1) 12 Mbps
|
|
* 2) 18 Mbps
|
|
* 3) 24 Mbps
|
|
* 4) 36 Mbps
|
|
* 5) 48 Mbps
|
|
* 6) 54 Mbps
|
|
* 7) 60 Mbps
|
|
*
|
|
* 3: 0) Single stream (SISO)
|
|
* 1) Dual stream (MIMO)
|
|
*
|
|
* 5: Value of 0x20 in bits 7:0 indicates 6 Mbps FAT duplicate data
|
|
*
|
|
* Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"):
|
|
* 3-0: 0xD) 6 Mbps
|
|
* 0xF) 9 Mbps
|
|
* 0x5) 12 Mbps
|
|
* 0x7) 18 Mbps
|
|
* 0x9) 24 Mbps
|
|
* 0xB) 36 Mbps
|
|
* 0x1) 48 Mbps
|
|
* 0x3) 54 Mbps
|
|
*
|
|
* Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
|
|
* 3-0: 10) 1 Mbps
|
|
* 20) 2 Mbps
|
|
* 55) 5.5 Mbps
|
|
* 110) 11 Mbps
|
|
*/
|
|
#define RATE_MCS_CODE_MSK 0x7
|
|
#define RATE_MCS_MIMO_POS 3
|
|
#define RATE_MCS_MIMO_MSK 0x8
|
|
#define RATE_MCS_HT_DUP_POS 5
|
|
#define RATE_MCS_HT_DUP_MSK 0x20
|
|
|
|
/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */
|
|
#define RATE_MCS_FLAGS_POS 8
|
|
#define RATE_MCS_HT_POS 8
|
|
#define RATE_MCS_HT_MSK 0x100
|
|
|
|
/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */
|
|
#define RATE_MCS_CCK_POS 9
|
|
#define RATE_MCS_CCK_MSK 0x200
|
|
|
|
/* Bit 10: (1) Use Green Field preamble */
|
|
#define RATE_MCS_GF_POS 10
|
|
#define RATE_MCS_GF_MSK 0x400
|
|
|
|
/* Bit 11: (1) Use 40Mhz FAT chnl width, (0) use 20 MHz legacy chnl width */
|
|
#define RATE_MCS_FAT_POS 11
|
|
#define RATE_MCS_FAT_MSK 0x800
|
|
|
|
/* Bit 12: (1) Duplicate data on both 20MHz chnls. FAT (bit 11) must be set. */
|
|
#define RATE_MCS_DUP_POS 12
|
|
#define RATE_MCS_DUP_MSK 0x1000
|
|
|
|
/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
|
|
#define RATE_MCS_SGI_POS 13
|
|
#define RATE_MCS_SGI_MSK 0x2000
|
|
|
|
/**
|
|
* rate_n_flags Tx antenna masks (4965 has 2 transmitters):
|
|
* bit14:15 01 B inactive, A active
|
|
* 10 B active, A inactive
|
|
* 11 Both active
|
|
*/
|
|
#define RATE_MCS_ANT_A_POS 14
|
|
#define RATE_MCS_ANT_B_POS 15
|
|
#define RATE_MCS_ANT_A_MSK 0x4000
|
|
#define RATE_MCS_ANT_B_MSK 0x8000
|
|
#define RATE_MCS_ANT_AB_MSK 0xc000
|
|
|
|
|
|
/**
|
|
* struct iwl4965_tx_power - txpower format used in REPLY_SCAN_CMD
|
|
*
|
|
* Scan uses only one transmitter, so only one analog/dsp gain pair is needed.
|
|
*/
|
|
struct iwl4965_tx_power {
|
|
u8 tx_gain; /* gain for analog radio */
|
|
u8 dsp_atten; /* gain for DSP */
|
|
} __attribute__ ((packed));
|
|
|
|
#define POWER_TABLE_NUM_ENTRIES 33
|
|
#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32
|
|
#define POWER_TABLE_CCK_ENTRY 32
|
|
|
|
/**
|
|
* union iwl4965_tx_power_dual_stream
|
|
*
|
|
* Host format used for REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
|
|
* Use __le32 version (struct tx_power_dual_stream) when building command.
|
|
*
|
|
* Driver provides radio gain and DSP attenuation settings to device in pairs,
|
|
* one value for each transmitter chain. The first value is for transmitter A,
|
|
* second for transmitter B.
|
|
*
|
|
* For SISO bit rates, both values in a pair should be identical.
|
|
* For MIMO rates, one value may be different from the other,
|
|
* in order to balance the Tx output between the two transmitters.
|
|
*
|
|
* See more details in doc for TXPOWER in iwl-4965-hw.h.
|
|
*/
|
|
union iwl4965_tx_power_dual_stream {
|
|
struct {
|
|
u8 radio_tx_gain[2];
|
|
u8 dsp_predis_atten[2];
|
|
} s;
|
|
u32 dw;
|
|
};
|
|
|
|
/**
|
|
* struct tx_power_dual_stream
|
|
*
|
|
* Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
|
|
*
|
|
* Same format as iwl_tx_power_dual_stream, but __le32
|
|
*/
|
|
struct tx_power_dual_stream {
|
|
__le32 dw;
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct iwl4965_tx_power_db
|
|
*
|
|
* Entire table within REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
|
|
*/
|
|
struct iwl4965_tx_power_db {
|
|
struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES];
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/******************************************************************************
|
|
* (0a)
|
|
* Alive and Error Commands & Responses:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#define UCODE_VALID_OK __constant_cpu_to_le32(0x1)
|
|
#define INITIALIZE_SUBTYPE (9)
|
|
|
|
/*
|
|
* ("Initialize") REPLY_ALIVE = 0x1 (response only, not a command)
|
|
*
|
|
* uCode issues this "initialize alive" notification once the initialization
|
|
* uCode image has completed its work, and is ready to load the runtime image.
|
|
* This is the *first* "alive" notification that the driver will receive after
|
|
* rebooting uCode; the "initialize" alive is indicated by subtype field == 9.
|
|
*
|
|
* See comments documenting "BSM" (bootstrap state machine).
|
|
*
|
|
* For 4965, this notification contains important calibration data for
|
|
* calculating txpower settings:
|
|
*
|
|
* 1) Power supply voltage indication. The voltage sensor outputs higher
|
|
* values for lower voltage, and vice versa.
|
|
*
|
|
* 2) Temperature measurement parameters, for each of two channel widths
|
|
* (20 MHz and 40 MHz) supported by the radios. Temperature sensing
|
|
* is done via one of the receiver chains, and channel width influences
|
|
* the results.
|
|
*
|
|
* 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation,
|
|
* for each of 5 frequency ranges.
|
|
*/
|
|
struct iwl4965_init_alive_resp {
|
|
u8 ucode_minor;
|
|
u8 ucode_major;
|
|
__le16 reserved1;
|
|
u8 sw_rev[8];
|
|
u8 ver_type;
|
|
u8 ver_subtype; /* "9" for initialize alive */
|
|
__le16 reserved2;
|
|
__le32 log_event_table_ptr;
|
|
__le32 error_event_table_ptr;
|
|
__le32 timestamp;
|
|
__le32 is_valid;
|
|
|
|
/* calibration values from "initialize" uCode */
|
|
__le32 voltage; /* signed, higher value is lower voltage */
|
|
__le32 therm_r1[2]; /* signed, 1st for normal, 2nd for FAT channel*/
|
|
__le32 therm_r2[2]; /* signed */
|
|
__le32 therm_r3[2]; /* signed */
|
|
__le32 therm_r4[2]; /* signed */
|
|
__le32 tx_atten[5][2]; /* signed MIMO gain comp, 5 freq groups,
|
|
* 2 Tx chains */
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/**
|
|
* REPLY_ALIVE = 0x1 (response only, not a command)
|
|
*
|
|
* uCode issues this "alive" notification once the runtime image is ready
|
|
* to receive commands from the driver. This is the *second* "alive"
|
|
* notification that the driver will receive after rebooting uCode;
|
|
* this "alive" is indicated by subtype field != 9.
|
|
*
|
|
* See comments documenting "BSM" (bootstrap state machine).
|
|
*
|
|
* This response includes two pointers to structures within the device's
|
|
* data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging:
|
|
*
|
|
* 1) log_event_table_ptr indicates base of the event log. This traces
|
|
* a 256-entry history of uCode execution within a circular buffer.
|
|
* Its header format is:
|
|
*
|
|
* __le32 log_size; log capacity (in number of entries)
|
|
* __le32 type; (1) timestamp with each entry, (0) no timestamp
|
|
* __le32 wraps; # times uCode has wrapped to top of circular buffer
|
|
* __le32 write_index; next circular buffer entry that uCode would fill
|
|
*
|
|
* The header is followed by the circular buffer of log entries. Entries
|
|
* with timestamps have the following format:
|
|
*
|
|
* __le32 event_id; range 0 - 1500
|
|
* __le32 timestamp; low 32 bits of TSF (of network, if associated)
|
|
* __le32 data; event_id-specific data value
|
|
*
|
|
* Entries without timestamps contain only event_id and data.
|
|
*
|
|
* 2) error_event_table_ptr indicates base of the error log. This contains
|
|
* information about any uCode error that occurs. For 4965, the format
|
|
* of the error log is:
|
|
*
|
|
* __le32 valid; (nonzero) valid, (0) log is empty
|
|
* __le32 error_id; type of error
|
|
* __le32 pc; program counter
|
|
* __le32 blink1; branch link
|
|
* __le32 blink2; branch link
|
|
* __le32 ilink1; interrupt link
|
|
* __le32 ilink2; interrupt link
|
|
* __le32 data1; error-specific data
|
|
* __le32 data2; error-specific data
|
|
* __le32 line; source code line of error
|
|
* __le32 bcon_time; beacon timer
|
|
* __le32 tsf_low; network timestamp function timer
|
|
* __le32 tsf_hi; network timestamp function timer
|
|
*
|
|
* The Linux driver can print both logs to the system log when a uCode error
|
|
* occurs.
|
|
*/
|
|
struct iwl4965_alive_resp {
|
|
u8 ucode_minor;
|
|
u8 ucode_major;
|
|
__le16 reserved1;
|
|
u8 sw_rev[8];
|
|
u8 ver_type;
|
|
u8 ver_subtype; /* not "9" for runtime alive */
|
|
__le16 reserved2;
|
|
__le32 log_event_table_ptr; /* SRAM address for event log */
|
|
__le32 error_event_table_ptr; /* SRAM address for error log */
|
|
__le32 timestamp;
|
|
__le32 is_valid;
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
union tsf {
|
|
u8 byte[8];
|
|
__le16 word[4];
|
|
__le32 dw[2];
|
|
};
|
|
|
|
/*
|
|
* REPLY_ERROR = 0x2 (response only, not a command)
|
|
*/
|
|
struct iwl4965_error_resp {
|
|
__le32 error_type;
|
|
u8 cmd_id;
|
|
u8 reserved1;
|
|
__le16 bad_cmd_seq_num;
|
|
__le32 error_info;
|
|
union tsf timestamp;
|
|
} __attribute__ ((packed));
|
|
|
|
/******************************************************************************
|
|
* (1)
|
|
* RXON Commands & Responses:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/*
|
|
* Rx config defines & structure
|
|
*/
|
|
/* rx_config device types */
|
|
enum {
|
|
RXON_DEV_TYPE_AP = 1,
|
|
RXON_DEV_TYPE_ESS = 3,
|
|
RXON_DEV_TYPE_IBSS = 4,
|
|
RXON_DEV_TYPE_SNIFFER = 6,
|
|
};
|
|
|
|
|
|
#define RXON_RX_CHAIN_DRIVER_FORCE_MSK __constant_cpu_to_le16(0x1 << 0)
|
|
#define RXON_RX_CHAIN_VALID_MSK __constant_cpu_to_le16(0x7 << 1)
|
|
#define RXON_RX_CHAIN_VALID_POS (1)
|
|
#define RXON_RX_CHAIN_FORCE_SEL_MSK __constant_cpu_to_le16(0x7 << 4)
|
|
#define RXON_RX_CHAIN_FORCE_SEL_POS (4)
|
|
#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK __constant_cpu_to_le16(0x7 << 7)
|
|
#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7)
|
|
#define RXON_RX_CHAIN_CNT_MSK __constant_cpu_to_le16(0x3 << 10)
|
|
#define RXON_RX_CHAIN_CNT_POS (10)
|
|
#define RXON_RX_CHAIN_MIMO_CNT_MSK __constant_cpu_to_le16(0x3 << 12)
|
|
#define RXON_RX_CHAIN_MIMO_CNT_POS (12)
|
|
#define RXON_RX_CHAIN_MIMO_FORCE_MSK __constant_cpu_to_le16(0x1 << 14)
|
|
#define RXON_RX_CHAIN_MIMO_FORCE_POS (14)
|
|
|
|
/* rx_config flags */
|
|
/* band & modulation selection */
|
|
#define RXON_FLG_BAND_24G_MSK __constant_cpu_to_le32(1 << 0)
|
|
#define RXON_FLG_CCK_MSK __constant_cpu_to_le32(1 << 1)
|
|
/* auto detection enable */
|
|
#define RXON_FLG_AUTO_DETECT_MSK __constant_cpu_to_le32(1 << 2)
|
|
/* TGg protection when tx */
|
|
#define RXON_FLG_TGG_PROTECT_MSK __constant_cpu_to_le32(1 << 3)
|
|
/* cck short slot & preamble */
|
|
#define RXON_FLG_SHORT_SLOT_MSK __constant_cpu_to_le32(1 << 4)
|
|
#define RXON_FLG_SHORT_PREAMBLE_MSK __constant_cpu_to_le32(1 << 5)
|
|
/* antenna selection */
|
|
#define RXON_FLG_DIS_DIV_MSK __constant_cpu_to_le32(1 << 7)
|
|
#define RXON_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0x0f00)
|
|
#define RXON_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8)
|
|
#define RXON_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9)
|
|
/* radar detection enable */
|
|
#define RXON_FLG_RADAR_DETECT_MSK __constant_cpu_to_le32(1 << 12)
|
|
#define RXON_FLG_TGJ_NARROW_BAND_MSK __constant_cpu_to_le32(1 << 13)
|
|
/* rx response to host with 8-byte TSF
|
|
* (according to ON_AIR deassertion) */
|
|
#define RXON_FLG_TSF2HOST_MSK __constant_cpu_to_le32(1 << 15)
|
|
|
|
|
|
/* HT flags */
|
|
#define RXON_FLG_CTRL_CHANNEL_LOC_POS (22)
|
|
#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK __constant_cpu_to_le32(0x1 << 22)
|
|
|
|
#define RXON_FLG_HT_OPERATING_MODE_POS (23)
|
|
|
|
#define RXON_FLG_HT_PROT_MSK __constant_cpu_to_le32(0x1 << 23)
|
|
#define RXON_FLG_FAT_PROT_MSK __constant_cpu_to_le32(0x2 << 23)
|
|
|
|
#define RXON_FLG_CHANNEL_MODE_POS (25)
|
|
#define RXON_FLG_CHANNEL_MODE_MSK __constant_cpu_to_le32(0x3 << 25)
|
|
#define RXON_FLG_CHANNEL_MODE_PURE_40_MSK __constant_cpu_to_le32(0x1 << 25)
|
|
#define RXON_FLG_CHANNEL_MODE_MIXED_MSK __constant_cpu_to_le32(0x2 << 25)
|
|
|
|
/* rx_config filter flags */
|
|
/* accept all data frames */
|
|
#define RXON_FILTER_PROMISC_MSK __constant_cpu_to_le32(1 << 0)
|
|
/* pass control & management to host */
|
|
#define RXON_FILTER_CTL2HOST_MSK __constant_cpu_to_le32(1 << 1)
|
|
/* accept multi-cast */
|
|
#define RXON_FILTER_ACCEPT_GRP_MSK __constant_cpu_to_le32(1 << 2)
|
|
/* don't decrypt uni-cast frames */
|
|
#define RXON_FILTER_DIS_DECRYPT_MSK __constant_cpu_to_le32(1 << 3)
|
|
/* don't decrypt multi-cast frames */
|
|
#define RXON_FILTER_DIS_GRP_DECRYPT_MSK __constant_cpu_to_le32(1 << 4)
|
|
/* STA is associated */
|
|
#define RXON_FILTER_ASSOC_MSK __constant_cpu_to_le32(1 << 5)
|
|
/* transfer to host non bssid beacons in associated state */
|
|
#define RXON_FILTER_BCON_AWARE_MSK __constant_cpu_to_le32(1 << 6)
|
|
|
|
/**
|
|
* REPLY_RXON = 0x10 (command, has simple generic response)
|
|
*
|
|
* RXON tunes the radio tuner to a service channel, and sets up a number
|
|
* of parameters that are used primarily for Rx, but also for Tx operations.
|
|
*
|
|
* NOTE: When tuning to a new channel, driver must set the
|
|
* RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent
|
|
* info within the device, including the station tables, tx retry
|
|
* rate tables, and txpower tables. Driver must build a new station
|
|
* table and txpower table before transmitting anything on the RXON
|
|
* channel.
|
|
*
|
|
* NOTE: All RXONs wipe clean the internal txpower table. Driver must
|
|
* issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10),
|
|
* regardless of whether RXON_FILTER_ASSOC_MSK is set.
|
|
*/
|
|
struct iwl4965_rxon_cmd {
|
|
u8 node_addr[6];
|
|
__le16 reserved1;
|
|
u8 bssid_addr[6];
|
|
__le16 reserved2;
|
|
u8 wlap_bssid_addr[6];
|
|
__le16 reserved3;
|
|
u8 dev_type;
|
|
u8 air_propagation;
|
|
__le16 rx_chain;
|
|
u8 ofdm_basic_rates;
|
|
u8 cck_basic_rates;
|
|
__le16 assoc_id;
|
|
__le32 flags;
|
|
__le32 filter_flags;
|
|
__le16 channel;
|
|
u8 ofdm_ht_single_stream_basic_rates;
|
|
u8 ofdm_ht_dual_stream_basic_rates;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_RXON_ASSOC = 0x11 (command, has simple generic response)
|
|
*/
|
|
struct iwl4965_rxon_assoc_cmd {
|
|
__le32 flags;
|
|
__le32 filter_flags;
|
|
u8 ofdm_basic_rates;
|
|
u8 cck_basic_rates;
|
|
u8 ofdm_ht_single_stream_basic_rates;
|
|
u8 ofdm_ht_dual_stream_basic_rates;
|
|
__le16 rx_chain_select_flags;
|
|
__le16 reserved;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_RXON_TIMING = 0x14 (command, has simple generic response)
|
|
*/
|
|
struct iwl4965_rxon_time_cmd {
|
|
union tsf timestamp;
|
|
__le16 beacon_interval;
|
|
__le16 atim_window;
|
|
__le32 beacon_init_val;
|
|
__le16 listen_interval;
|
|
__le16 reserved;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response)
|
|
*/
|
|
struct iwl4965_channel_switch_cmd {
|
|
u8 band;
|
|
u8 expect_beacon;
|
|
__le16 channel;
|
|
__le32 rxon_flags;
|
|
__le32 rxon_filter_flags;
|
|
__le32 switch_time;
|
|
struct iwl4965_tx_power_db tx_power;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command)
|
|
*/
|
|
struct iwl4965_csa_notification {
|
|
__le16 band;
|
|
__le16 channel;
|
|
__le32 status; /* 0 - OK, 1 - fail */
|
|
} __attribute__ ((packed));
|
|
|
|
/******************************************************************************
|
|
* (2)
|
|
* Quality-of-Service (QOS) Commands & Responses:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/**
|
|
* struct iwl_ac_qos -- QOS timing params for REPLY_QOS_PARAM
|
|
* One for each of 4 EDCA access categories in struct iwl_qosparam_cmd
|
|
*
|
|
* @cw_min: Contention window, start value in numbers of slots.
|
|
* Should be a power-of-2, minus 1. Device's default is 0x0f.
|
|
* @cw_max: Contention window, max value in numbers of slots.
|
|
* Should be a power-of-2, minus 1. Device's default is 0x3f.
|
|
* @aifsn: Number of slots in Arbitration Interframe Space (before
|
|
* performing random backoff timing prior to Tx). Device default 1.
|
|
* @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0.
|
|
*
|
|
* Device will automatically increase contention window by (2*CW) + 1 for each
|
|
* transmission retry. Device uses cw_max as a bit mask, ANDed with new CW
|
|
* value, to cap the CW value.
|
|
*/
|
|
struct iwl4965_ac_qos {
|
|
__le16 cw_min;
|
|
__le16 cw_max;
|
|
u8 aifsn;
|
|
u8 reserved1;
|
|
__le16 edca_txop;
|
|
} __attribute__ ((packed));
|
|
|
|
/* QoS flags defines */
|
|
#define QOS_PARAM_FLG_UPDATE_EDCA_MSK __constant_cpu_to_le32(0x01)
|
|
#define QOS_PARAM_FLG_TGN_MSK __constant_cpu_to_le32(0x02)
|
|
#define QOS_PARAM_FLG_TXOP_TYPE_MSK __constant_cpu_to_le32(0x10)
|
|
|
|
/* Number of Access Categories (AC) (EDCA), queues 0..3 */
|
|
#define AC_NUM 4
|
|
|
|
/*
|
|
* REPLY_QOS_PARAM = 0x13 (command, has simple generic response)
|
|
*
|
|
* This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs
|
|
* 0: Background, 1: Best Effort, 2: Video, 3: Voice.
|
|
*/
|
|
struct iwl4965_qosparam_cmd {
|
|
__le32 qos_flags;
|
|
struct iwl4965_ac_qos ac[AC_NUM];
|
|
} __attribute__ ((packed));
|
|
|
|
/******************************************************************************
|
|
* (3)
|
|
* Add/Modify Stations Commands & Responses:
|
|
*
|
|
*****************************************************************************/
|
|
/*
|
|
* Multi station support
|
|
*/
|
|
|
|
/* Special, dedicated locations within device's station table */
|
|
#define IWL_AP_ID 0
|
|
#define IWL_MULTICAST_ID 1
|
|
#define IWL_STA_ID 2
|
|
#define IWL4965_BROADCAST_ID 31
|
|
#define IWL4965_STATION_COUNT 32
|
|
|
|
#define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/
|
|
#define IWL_INVALID_STATION 255
|
|
|
|
#define STA_FLG_PWR_SAVE_MSK __constant_cpu_to_le32(1 << 8);
|
|
#define STA_FLG_RTS_MIMO_PROT_MSK __constant_cpu_to_le32(1 << 17)
|
|
#define STA_FLG_AGG_MPDU_8US_MSK __constant_cpu_to_le32(1 << 18)
|
|
#define STA_FLG_MAX_AGG_SIZE_POS (19)
|
|
#define STA_FLG_MAX_AGG_SIZE_MSK __constant_cpu_to_le32(3 << 19)
|
|
#define STA_FLG_FAT_EN_MSK __constant_cpu_to_le32(1 << 21)
|
|
#define STA_FLG_MIMO_DIS_MSK __constant_cpu_to_le32(1 << 22)
|
|
#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
|
|
#define STA_FLG_AGG_MPDU_DENSITY_MSK __constant_cpu_to_le32(7 << 23)
|
|
|
|
/* Use in mode field. 1: modify existing entry, 0: add new station entry */
|
|
#define STA_CONTROL_MODIFY_MSK 0x01
|
|
|
|
/* key flags __le16*/
|
|
#define STA_KEY_FLG_ENCRYPT_MSK __constant_cpu_to_le16(0x0007)
|
|
#define STA_KEY_FLG_NO_ENC __constant_cpu_to_le16(0x0000)
|
|
#define STA_KEY_FLG_WEP __constant_cpu_to_le16(0x0001)
|
|
#define STA_KEY_FLG_CCMP __constant_cpu_to_le16(0x0002)
|
|
#define STA_KEY_FLG_TKIP __constant_cpu_to_le16(0x0003)
|
|
|
|
#define STA_KEY_FLG_KEYID_POS 8
|
|
#define STA_KEY_FLG_INVALID __constant_cpu_to_le16(0x0800)
|
|
/* wep key is either from global key (0) or from station info array (1) */
|
|
#define STA_KEY_FLG_MAP_KEY_MSK __constant_cpu_to_le16(0x0008)
|
|
|
|
/* wep key in STA: 5-bytes (0) or 13-bytes (1) */
|
|
#define STA_KEY_FLG_KEY_SIZE_MSK __constant_cpu_to_le16(0x1000)
|
|
#define STA_KEY_MULTICAST_MSK __constant_cpu_to_le16(0x4000)
|
|
#define STA_KEY_MAX_NUM 8
|
|
|
|
/* Flags indicate whether to modify vs. don't change various station params */
|
|
#define STA_MODIFY_KEY_MASK 0x01
|
|
#define STA_MODIFY_TID_DISABLE_TX 0x02
|
|
#define STA_MODIFY_TX_RATE_MSK 0x04
|
|
#define STA_MODIFY_ADDBA_TID_MSK 0x08
|
|
#define STA_MODIFY_DELBA_TID_MSK 0x10
|
|
|
|
/* Receiver address (actually, Rx station's index into station table),
|
|
* combined with Traffic ID (QOS priority), in format used by Tx Scheduler */
|
|
#define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid))
|
|
|
|
struct iwl4965_keyinfo {
|
|
__le16 key_flags;
|
|
u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */
|
|
u8 reserved1;
|
|
__le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */
|
|
u8 key_offset;
|
|
u8 reserved2;
|
|
u8 key[16]; /* 16-byte unicast decryption key */
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct sta_id_modify
|
|
* @addr[ETH_ALEN]: station's MAC address
|
|
* @sta_id: index of station in uCode's station table
|
|
* @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change
|
|
*
|
|
* Driver selects unused table index when adding new station,
|
|
* or the index to a pre-existing station entry when modifying that station.
|
|
* Some indexes have special purposes (IWL_AP_ID, index 0, is for AP).
|
|
*
|
|
* modify_mask flags select which parameters to modify vs. leave alone.
|
|
*/
|
|
struct sta_id_modify {
|
|
u8 addr[ETH_ALEN];
|
|
__le16 reserved1;
|
|
u8 sta_id;
|
|
u8 modify_mask;
|
|
__le16 reserved2;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_ADD_STA = 0x18 (command)
|
|
*
|
|
* The device contains an internal table of per-station information,
|
|
* with info on security keys, aggregation parameters, and Tx rates for
|
|
* initial Tx attempt and any retries (4965 uses REPLY_TX_LINK_QUALITY_CMD,
|
|
* 3945 uses REPLY_RATE_SCALE to set up rate tables).
|
|
*
|
|
* REPLY_ADD_STA sets up the table entry for one station, either creating
|
|
* a new entry, or modifying a pre-existing one.
|
|
*
|
|
* NOTE: RXON command (without "associated" bit set) wipes the station table
|
|
* clean. Moving into RF_KILL state does this also. Driver must set up
|
|
* new station table before transmitting anything on the RXON channel
|
|
* (except active scans or active measurements; those commands carry
|
|
* their own txpower/rate setup data).
|
|
*
|
|
* When getting started on a new channel, driver must set up the
|
|
* IWL_BROADCAST_ID entry (last entry in the table). For a client
|
|
* station in a BSS, once an AP is selected, driver sets up the AP STA
|
|
* in the IWL_AP_ID entry (1st entry in the table). BROADCAST and AP
|
|
* are all that are needed for a BSS client station. If the device is
|
|
* used as AP, or in an IBSS network, driver must set up station table
|
|
* entries for all STAs in network, starting with index IWL_STA_ID.
|
|
*/
|
|
struct iwl4965_addsta_cmd {
|
|
u8 mode; /* 1: modify existing, 0: add new station */
|
|
u8 reserved[3];
|
|
struct sta_id_modify sta;
|
|
struct iwl4965_keyinfo key;
|
|
__le32 station_flags; /* STA_FLG_* */
|
|
__le32 station_flags_msk; /* STA_FLG_* */
|
|
|
|
/* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
|
|
* corresponding to bit (e.g. bit 5 controls TID 5).
|
|
* Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
|
|
__le16 tid_disable_tx;
|
|
|
|
__le16 reserved1;
|
|
|
|
/* TID for which to add block-ack support.
|
|
* Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
|
|
u8 add_immediate_ba_tid;
|
|
|
|
/* TID for which to remove block-ack support.
|
|
* Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
|
|
u8 remove_immediate_ba_tid;
|
|
|
|
/* Starting Sequence Number for added block-ack support.
|
|
* Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
|
|
__le16 add_immediate_ba_ssn;
|
|
|
|
__le32 reserved2;
|
|
} __attribute__ ((packed));
|
|
|
|
#define ADD_STA_SUCCESS_MSK 0x1
|
|
#define ADD_STA_NO_ROOM_IN_TABLE 0x2
|
|
#define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4
|
|
#define ADD_STA_MODIFY_NON_EXIST_STA 0x8
|
|
/*
|
|
* REPLY_ADD_STA = 0x18 (response)
|
|
*/
|
|
struct iwl4965_add_sta_resp {
|
|
u8 status; /* ADD_STA_* */
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/******************************************************************************
|
|
* (4)
|
|
* Rx Responses:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
struct iwl4965_rx_frame_stats {
|
|
u8 phy_count;
|
|
u8 id;
|
|
u8 rssi;
|
|
u8 agc;
|
|
__le16 sig_avg;
|
|
__le16 noise_diff;
|
|
u8 payload[0];
|
|
} __attribute__ ((packed));
|
|
|
|
struct iwl4965_rx_frame_hdr {
|
|
__le16 channel;
|
|
__le16 phy_flags;
|
|
u8 reserved1;
|
|
u8 rate;
|
|
__le16 len;
|
|
u8 payload[0];
|
|
} __attribute__ ((packed));
|
|
|
|
#define RX_RES_STATUS_NO_CRC32_ERROR __constant_cpu_to_le32(1 << 0)
|
|
#define RX_RES_STATUS_NO_RXE_OVERFLOW __constant_cpu_to_le32(1 << 1)
|
|
|
|
#define RX_RES_PHY_FLAGS_BAND_24_MSK __constant_cpu_to_le16(1 << 0)
|
|
#define RX_RES_PHY_FLAGS_MOD_CCK_MSK __constant_cpu_to_le16(1 << 1)
|
|
#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK __constant_cpu_to_le16(1 << 2)
|
|
#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK __constant_cpu_to_le16(1 << 3)
|
|
#define RX_RES_PHY_FLAGS_ANTENNA_MSK __constant_cpu_to_le16(0xf0)
|
|
|
|
#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8)
|
|
#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8)
|
|
#define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8)
|
|
#define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8)
|
|
#define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8)
|
|
#define RX_RES_STATUS_SEC_TYPE_ERR (0x7 << 8)
|
|
|
|
#define RX_RES_STATUS_STATION_FOUND (1<<6)
|
|
#define RX_RES_STATUS_NO_STATION_INFO_MISMATCH (1<<7)
|
|
|
|
#define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11)
|
|
#define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11)
|
|
#define RX_RES_STATUS_DECRYPT_OK (0x3 << 11)
|
|
#define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11)
|
|
#define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11)
|
|
|
|
#define RX_MPDU_RES_STATUS_ICV_OK (0x20)
|
|
#define RX_MPDU_RES_STATUS_MIC_OK (0x40)
|
|
#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7)
|
|
#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800)
|
|
|
|
struct iwl4965_rx_frame_end {
|
|
__le32 status;
|
|
__le64 timestamp;
|
|
__le32 beacon_timestamp;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_3945_RX = 0x1b (response only, not a command)
|
|
*
|
|
* NOTE: DO NOT dereference from casts to this structure
|
|
* It is provided only for calculating minimum data set size.
|
|
* The actual offsets of the hdr and end are dynamic based on
|
|
* stats.phy_count
|
|
*/
|
|
struct iwl4965_rx_frame {
|
|
struct iwl4965_rx_frame_stats stats;
|
|
struct iwl4965_rx_frame_hdr hdr;
|
|
struct iwl4965_rx_frame_end end;
|
|
} __attribute__ ((packed));
|
|
|
|
/* Fixed (non-configurable) rx data from phy */
|
|
#define RX_PHY_FLAGS_ANTENNAE_OFFSET (4)
|
|
#define RX_PHY_FLAGS_ANTENNAE_MASK (0x70)
|
|
#define IWL_AGC_DB_MASK (0x3f80) /* MASK(7,13) */
|
|
#define IWL_AGC_DB_POS (7)
|
|
struct iwl4965_rx_non_cfg_phy {
|
|
__le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */
|
|
__le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */
|
|
u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */
|
|
u8 pad[0];
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_4965_RX = 0xc3 (response only, not a command)
|
|
* Used only for legacy (non 11n) frames.
|
|
*/
|
|
#define RX_RES_PHY_CNT 14
|
|
struct iwl4965_rx_phy_res {
|
|
u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */
|
|
u8 cfg_phy_cnt; /* configurable DSP phy data byte count */
|
|
u8 stat_id; /* configurable DSP phy data set ID */
|
|
u8 reserved1;
|
|
__le64 timestamp; /* TSF at on air rise */
|
|
__le32 beacon_time_stamp; /* beacon at on-air rise */
|
|
__le16 phy_flags; /* general phy flags: band, modulation, ... */
|
|
__le16 channel; /* channel number */
|
|
__le16 non_cfg_phy[RX_RES_PHY_CNT]; /* upto 14 phy entries */
|
|
__le32 reserved2;
|
|
__le32 rate_n_flags; /* RATE_MCS_* */
|
|
__le16 byte_count; /* frame's byte-count */
|
|
__le16 reserved3;
|
|
} __attribute__ ((packed));
|
|
|
|
struct iwl4965_rx_mpdu_res_start {
|
|
__le16 byte_count;
|
|
__le16 reserved;
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/******************************************************************************
|
|
* (5)
|
|
* Tx Commands & Responses:
|
|
*
|
|
* Driver must place each REPLY_TX command into one of the prioritized Tx
|
|
* queues in host DRAM, shared between driver and device (see comments for
|
|
* SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode
|
|
* are preparing to transmit, the device pulls the Tx command over the PCI
|
|
* bus via one of the device's Tx DMA channels, to fill an internal FIFO
|
|
* from which data will be transmitted.
|
|
*
|
|
* uCode handles all timing and protocol related to control frames
|
|
* (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler
|
|
* handle reception of block-acks; uCode updates the host driver via
|
|
* REPLY_COMPRESSED_BA (4965).
|
|
*
|
|
* uCode handles retrying Tx when an ACK is expected but not received.
|
|
* This includes trying lower data rates than the one requested in the Tx
|
|
* command, as set up by the REPLY_RATE_SCALE (for 3945) or
|
|
* REPLY_TX_LINK_QUALITY_CMD (4965).
|
|
*
|
|
* Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD.
|
|
* This command must be executed after every RXON command, before Tx can occur.
|
|
*****************************************************************************/
|
|
|
|
/* REPLY_TX Tx flags field */
|
|
|
|
/* 1: Use Request-To-Send protocol before this frame.
|
|
* Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */
|
|
#define TX_CMD_FLG_RTS_MSK __constant_cpu_to_le32(1 << 1)
|
|
|
|
/* 1: Transmit Clear-To-Send to self before this frame.
|
|
* Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames.
|
|
* Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */
|
|
#define TX_CMD_FLG_CTS_MSK __constant_cpu_to_le32(1 << 2)
|
|
|
|
/* 1: Expect ACK from receiving station
|
|
* 0: Don't expect ACK (MAC header's duration field s/b 0)
|
|
* Set this for unicast frames, but not broadcast/multicast. */
|
|
#define TX_CMD_FLG_ACK_MSK __constant_cpu_to_le32(1 << 3)
|
|
|
|
/* For 4965:
|
|
* 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD).
|
|
* Tx command's initial_rate_index indicates first rate to try;
|
|
* uCode walks through table for additional Tx attempts.
|
|
* 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
|
|
* This rate will be used for all Tx attempts; it will not be scaled. */
|
|
#define TX_CMD_FLG_STA_RATE_MSK __constant_cpu_to_le32(1 << 4)
|
|
|
|
/* 1: Expect immediate block-ack.
|
|
* Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */
|
|
#define TX_CMD_FLG_IMM_BA_RSP_MASK __constant_cpu_to_le32(1 << 6)
|
|
|
|
/* 1: Frame requires full Tx-Op protection.
|
|
* Set this if either RTS or CTS Tx Flag gets set. */
|
|
#define TX_CMD_FLG_FULL_TXOP_PROT_MSK __constant_cpu_to_le32(1 << 7)
|
|
|
|
/* Tx antenna selection field; used only for 3945, reserved (0) for 4965.
|
|
* Set field to "0" to allow 3945 uCode to select antenna (normal usage). */
|
|
#define TX_CMD_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0xf00)
|
|
#define TX_CMD_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8)
|
|
#define TX_CMD_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9)
|
|
|
|
/* 1: Ignore Bluetooth priority for this frame.
|
|
* 0: Delay Tx until Bluetooth device is done (normal usage). */
|
|
#define TX_CMD_FLG_BT_DIS_MSK __constant_cpu_to_le32(1 << 12)
|
|
|
|
/* 1: uCode overrides sequence control field in MAC header.
|
|
* 0: Driver provides sequence control field in MAC header.
|
|
* Set this for management frames, non-QOS data frames, non-unicast frames,
|
|
* and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */
|
|
#define TX_CMD_FLG_SEQ_CTL_MSK __constant_cpu_to_le32(1 << 13)
|
|
|
|
/* 1: This frame is non-last MPDU; more fragments are coming.
|
|
* 0: Last fragment, or not using fragmentation. */
|
|
#define TX_CMD_FLG_MORE_FRAG_MSK __constant_cpu_to_le32(1 << 14)
|
|
|
|
/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
|
|
* 0: No TSF required in outgoing frame.
|
|
* Set this for transmitting beacons and probe responses. */
|
|
#define TX_CMD_FLG_TSF_MSK __constant_cpu_to_le32(1 << 16)
|
|
|
|
/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword
|
|
* alignment of frame's payload data field.
|
|
* 0: No pad
|
|
* Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4
|
|
* field (but not both). Driver must align frame data (i.e. data following
|
|
* MAC header) to DWORD boundary. */
|
|
#define TX_CMD_FLG_MH_PAD_MSK __constant_cpu_to_le32(1 << 20)
|
|
|
|
/* accelerate aggregation support
|
|
* 0 - no CCMP encryption; 1 - CCMP encryption */
|
|
#define TX_CMD_FLG_AGG_CCMP_MSK __constant_cpu_to_le32(1 << 22)
|
|
|
|
/* HCCA-AP - disable duration overwriting. */
|
|
#define TX_CMD_FLG_DUR_MSK __constant_cpu_to_le32(1 << 25)
|
|
|
|
|
|
/*
|
|
* TX command security control
|
|
*/
|
|
#define TX_CMD_SEC_WEP 0x01
|
|
#define TX_CMD_SEC_CCM 0x02
|
|
#define TX_CMD_SEC_TKIP 0x03
|
|
#define TX_CMD_SEC_MSK 0x03
|
|
#define TX_CMD_SEC_SHIFT 6
|
|
#define TX_CMD_SEC_KEY128 0x08
|
|
|
|
/*
|
|
* 4965 uCode updates these Tx attempt count values in host DRAM.
|
|
* Used for managing Tx retries when expecting block-acks.
|
|
* Driver should set these fields to 0.
|
|
*/
|
|
struct iwl4965_dram_scratch {
|
|
u8 try_cnt; /* Tx attempts */
|
|
u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */
|
|
__le16 reserved;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_TX = 0x1c (command)
|
|
*/
|
|
struct iwl4965_tx_cmd {
|
|
/*
|
|
* MPDU byte count:
|
|
* MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
|
|
* + 8 byte IV for CCM or TKIP (not used for WEP)
|
|
* + Data payload
|
|
* + 8-byte MIC (not used for CCM/WEP)
|
|
* NOTE: Does not include Tx command bytes, post-MAC pad bytes,
|
|
* MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
|
|
* Range: 14-2342 bytes.
|
|
*/
|
|
__le16 len;
|
|
|
|
/*
|
|
* MPDU or MSDU byte count for next frame.
|
|
* Used for fragmentation and bursting, but not 11n aggregation.
|
|
* Same as "len", but for next frame. Set to 0 if not applicable.
|
|
*/
|
|
__le16 next_frame_len;
|
|
|
|
__le32 tx_flags; /* TX_CMD_FLG_* */
|
|
|
|
/* 4965's uCode may modify this field of the Tx command (in host DRAM!).
|
|
* Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */
|
|
struct iwl4965_dram_scratch scratch;
|
|
|
|
/* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */
|
|
__le32 rate_n_flags; /* RATE_MCS_* */
|
|
|
|
/* Index of destination station in uCode's station table */
|
|
u8 sta_id;
|
|
|
|
/* Type of security encryption: CCM or TKIP */
|
|
u8 sec_ctl; /* TX_CMD_SEC_* */
|
|
|
|
/*
|
|
* Index into rate table (see REPLY_TX_LINK_QUALITY_CMD) for initial
|
|
* Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for
|
|
* data frames, this field may be used to selectively reduce initial
|
|
* rate (via non-0 value) for special frames (e.g. management), while
|
|
* still supporting rate scaling for all frames.
|
|
*/
|
|
u8 initial_rate_index;
|
|
u8 reserved;
|
|
u8 key[16];
|
|
__le16 next_frame_flags;
|
|
__le16 reserved2;
|
|
union {
|
|
__le32 life_time;
|
|
__le32 attempt;
|
|
} stop_time;
|
|
|
|
/* Host DRAM physical address pointer to "scratch" in this command.
|
|
* Must be dword aligned. "0" in dram_lsb_ptr disables usage. */
|
|
__le32 dram_lsb_ptr;
|
|
u8 dram_msb_ptr;
|
|
|
|
u8 rts_retry_limit; /*byte 50 */
|
|
u8 data_retry_limit; /*byte 51 */
|
|
u8 tid_tspec;
|
|
union {
|
|
__le16 pm_frame_timeout;
|
|
__le16 attempt_duration;
|
|
} timeout;
|
|
|
|
/*
|
|
* Duration of EDCA burst Tx Opportunity, in 32-usec units.
|
|
* Set this if txop time is not specified by HCCA protocol (e.g. by AP).
|
|
*/
|
|
__le16 driver_txop;
|
|
|
|
/*
|
|
* MAC header goes here, followed by 2 bytes padding if MAC header
|
|
* length is 26 or 30 bytes, followed by payload data
|
|
*/
|
|
u8 payload[0];
|
|
struct ieee80211_hdr hdr[0];
|
|
} __attribute__ ((packed));
|
|
|
|
/* TX command response is sent after *all* transmission attempts.
|
|
*
|
|
* NOTES:
|
|
*
|
|
* TX_STATUS_FAIL_NEXT_FRAG
|
|
*
|
|
* If the fragment flag in the MAC header for the frame being transmitted
|
|
* is set and there is insufficient time to transmit the next frame, the
|
|
* TX status will be returned with 'TX_STATUS_FAIL_NEXT_FRAG'.
|
|
*
|
|
* TX_STATUS_FIFO_UNDERRUN
|
|
*
|
|
* Indicates the host did not provide bytes to the FIFO fast enough while
|
|
* a TX was in progress.
|
|
*
|
|
* TX_STATUS_FAIL_MGMNT_ABORT
|
|
*
|
|
* This status is only possible if the ABORT ON MGMT RX parameter was
|
|
* set to true with the TX command.
|
|
*
|
|
* If the MSB of the status parameter is set then an abort sequence is
|
|
* required. This sequence consists of the host activating the TX Abort
|
|
* control line, and then waiting for the TX Abort command response. This
|
|
* indicates that a the device is no longer in a transmit state, and that the
|
|
* command FIFO has been cleared. The host must then deactivate the TX Abort
|
|
* control line. Receiving is still allowed in this case.
|
|
*/
|
|
enum {
|
|
TX_STATUS_SUCCESS = 0x01,
|
|
TX_STATUS_DIRECT_DONE = 0x02,
|
|
TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
|
|
TX_STATUS_FAIL_LONG_LIMIT = 0x83,
|
|
TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
|
|
TX_STATUS_FAIL_MGMNT_ABORT = 0x85,
|
|
TX_STATUS_FAIL_NEXT_FRAG = 0x86,
|
|
TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
|
|
TX_STATUS_FAIL_DEST_PS = 0x88,
|
|
TX_STATUS_FAIL_ABORTED = 0x89,
|
|
TX_STATUS_FAIL_BT_RETRY = 0x8a,
|
|
TX_STATUS_FAIL_STA_INVALID = 0x8b,
|
|
TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
|
|
TX_STATUS_FAIL_TID_DISABLE = 0x8d,
|
|
TX_STATUS_FAIL_FRAME_FLUSHED = 0x8e,
|
|
TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
|
|
TX_STATUS_FAIL_TX_LOCKED = 0x90,
|
|
TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
|
|
};
|
|
|
|
#define TX_PACKET_MODE_REGULAR 0x0000
|
|
#define TX_PACKET_MODE_BURST_SEQ 0x0100
|
|
#define TX_PACKET_MODE_BURST_FIRST 0x0200
|
|
|
|
enum {
|
|
TX_POWER_PA_NOT_ACTIVE = 0x0,
|
|
};
|
|
|
|
enum {
|
|
TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */
|
|
TX_STATUS_DELAY_MSK = 0x00000040,
|
|
TX_STATUS_ABORT_MSK = 0x00000080,
|
|
TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */
|
|
TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */
|
|
TX_RESERVED = 0x00780000, /* bits 19:22 */
|
|
TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */
|
|
TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */
|
|
};
|
|
|
|
/* *******************************
|
|
* TX aggregation status
|
|
******************************* */
|
|
|
|
enum {
|
|
AGG_TX_STATE_TRANSMITTED = 0x00,
|
|
AGG_TX_STATE_UNDERRUN_MSK = 0x01,
|
|
AGG_TX_STATE_BT_PRIO_MSK = 0x02,
|
|
AGG_TX_STATE_FEW_BYTES_MSK = 0x04,
|
|
AGG_TX_STATE_ABORT_MSK = 0x08,
|
|
AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10,
|
|
AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20,
|
|
AGG_TX_STATE_LAST_SENT_BT_KILL_MSK = 0x40,
|
|
AGG_TX_STATE_SCD_QUERY_MSK = 0x80,
|
|
AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100,
|
|
AGG_TX_STATE_RESPONSE_MSK = 0x1ff,
|
|
AGG_TX_STATE_DUMP_TX_MSK = 0x200,
|
|
AGG_TX_STATE_DELAY_TX_MSK = 0x400
|
|
};
|
|
|
|
#define AGG_TX_STATE_LAST_SENT_MSK \
|
|
(AGG_TX_STATE_LAST_SENT_TTL_MSK | \
|
|
AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \
|
|
AGG_TX_STATE_LAST_SENT_BT_KILL_MSK)
|
|
|
|
/* # tx attempts for first frame in aggregation */
|
|
#define AGG_TX_STATE_TRY_CNT_POS 12
|
|
#define AGG_TX_STATE_TRY_CNT_MSK 0xf000
|
|
|
|
/* Command ID and sequence number of Tx command for this frame */
|
|
#define AGG_TX_STATE_SEQ_NUM_POS 16
|
|
#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000
|
|
|
|
/*
|
|
* REPLY_TX = 0x1c (response)
|
|
*
|
|
* This response may be in one of two slightly different formats, indicated
|
|
* by the frame_count field:
|
|
*
|
|
* 1) No aggregation (frame_count == 1). This reports Tx results for
|
|
* a single frame. Multiple attempts, at various bit rates, may have
|
|
* been made for this frame.
|
|
*
|
|
* 2) Aggregation (frame_count > 1). This reports Tx results for
|
|
* 2 or more frames that used block-acknowledge. All frames were
|
|
* transmitted at same rate. Rate scaling may have been used if first
|
|
* frame in this new agg block failed in previous agg block(s).
|
|
*
|
|
* Note that, for aggregation, ACK (block-ack) status is not delivered here;
|
|
* block-ack has not been received by the time the 4965 records this status.
|
|
* This status relates to reasons the tx might have been blocked or aborted
|
|
* within the sending station (this 4965), rather than whether it was
|
|
* received successfully by the destination station.
|
|
*/
|
|
struct iwl4965_tx_resp {
|
|
u8 frame_count; /* 1 no aggregation, >1 aggregation */
|
|
u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */
|
|
u8 failure_rts; /* # failures due to unsuccessful RTS */
|
|
u8 failure_frame; /* # failures due to no ACK (unused for agg) */
|
|
|
|
/* For non-agg: Rate at which frame was successful.
|
|
* For agg: Rate at which all frames were transmitted. */
|
|
__le32 rate_n_flags; /* RATE_MCS_* */
|
|
|
|
/* For non-agg: RTS + CTS + frame tx attempts time + ACK.
|
|
* For agg: RTS + CTS + aggregation tx time + block-ack time. */
|
|
__le16 wireless_media_time; /* uSecs */
|
|
|
|
__le16 reserved;
|
|
__le32 pa_power1; /* RF power amplifier measurement (not used) */
|
|
__le32 pa_power2;
|
|
|
|
/*
|
|
* For non-agg: frame status TX_STATUS_*
|
|
* For agg: status of 1st frame, AGG_TX_STATE_*; other frame status
|
|
* fields follow this one, up to frame_count.
|
|
* Bit fields:
|
|
* 11- 0: AGG_TX_STATE_* status code
|
|
* 15-12: Retry count for 1st frame in aggregation (retries
|
|
* occur if tx failed for this frame when it was a
|
|
* member of a previous aggregation block). If rate
|
|
* scaling is used, retry count indicates the rate
|
|
* table entry used for all frames in the new agg.
|
|
* 31-16: Sequence # for this frame's Tx cmd (not SSN!)
|
|
*/
|
|
__le32 status; /* TX status (for aggregation status of 1st frame) */
|
|
} __attribute__ ((packed));
|
|
|
|
struct agg_tx_status {
|
|
__le16 status;
|
|
__le16 sequence;
|
|
} __attribute__ ((packed));
|
|
|
|
struct iwl4965_tx_resp_agg {
|
|
u8 frame_count; /* 1 no aggregation, >1 aggregation */
|
|
u8 reserved1;
|
|
u8 failure_rts;
|
|
u8 failure_frame;
|
|
__le32 rate_n_flags;
|
|
__le16 wireless_media_time;
|
|
__le16 reserved3;
|
|
__le32 pa_power1;
|
|
__le32 pa_power2;
|
|
struct agg_tx_status status; /* TX status (for aggregation status */
|
|
/* of 1st frame) */
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_COMPRESSED_BA = 0xc5 (response only, not a command)
|
|
*
|
|
* Reports Block-Acknowledge from recipient station
|
|
*/
|
|
struct iwl4965_compressed_ba_resp {
|
|
__le32 sta_addr_lo32;
|
|
__le16 sta_addr_hi16;
|
|
__le16 reserved;
|
|
|
|
/* Index of recipient (BA-sending) station in uCode's station table */
|
|
u8 sta_id;
|
|
u8 tid;
|
|
__le16 seq_ctl;
|
|
__le64 bitmap;
|
|
__le16 scd_flow;
|
|
__le16 scd_ssn;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response)
|
|
*
|
|
* See details under "TXPOWER" in iwl-4965-hw.h.
|
|
*/
|
|
struct iwl4965_txpowertable_cmd {
|
|
u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
|
|
u8 reserved;
|
|
__le16 channel;
|
|
struct iwl4965_tx_power_db tx_power;
|
|
} __attribute__ ((packed));
|
|
|
|
/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */
|
|
#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0)
|
|
|
|
/* # of EDCA prioritized tx fifos */
|
|
#define LINK_QUAL_AC_NUM AC_NUM
|
|
|
|
/* # entries in rate scale table to support Tx retries */
|
|
#define LINK_QUAL_MAX_RETRY_NUM 16
|
|
|
|
/* Tx antenna selection values */
|
|
#define LINK_QUAL_ANT_A_MSK (1 << 0)
|
|
#define LINK_QUAL_ANT_B_MSK (1 << 1)
|
|
#define LINK_QUAL_ANT_MSK (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK)
|
|
|
|
|
|
/**
|
|
* struct iwl4965_link_qual_general_params
|
|
*
|
|
* Used in REPLY_TX_LINK_QUALITY_CMD
|
|
*/
|
|
struct iwl4965_link_qual_general_params {
|
|
u8 flags;
|
|
|
|
/* No entries at or above this (driver chosen) index contain MIMO */
|
|
u8 mimo_delimiter;
|
|
|
|
/* Best single antenna to use for single stream (legacy, SISO). */
|
|
u8 single_stream_ant_msk; /* LINK_QUAL_ANT_* */
|
|
|
|
/* Best antennas to use for MIMO (unused for 4965, assumes both). */
|
|
u8 dual_stream_ant_msk; /* LINK_QUAL_ANT_* */
|
|
|
|
/*
|
|
* If driver needs to use different initial rates for different
|
|
* EDCA QOS access categories (as implemented by tx fifos 0-3),
|
|
* this table will set that up, by indicating the indexes in the
|
|
* rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start.
|
|
* Otherwise, driver should set all entries to 0.
|
|
*
|
|
* Entry usage:
|
|
* 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice
|
|
* TX FIFOs above 3 use same value (typically 0) as TX FIFO 3.
|
|
*/
|
|
u8 start_rate_index[LINK_QUAL_AC_NUM];
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct iwl4965_link_qual_agg_params
|
|
*
|
|
* Used in REPLY_TX_LINK_QUALITY_CMD
|
|
*/
|
|
struct iwl4965_link_qual_agg_params {
|
|
|
|
/* Maximum number of uSec in aggregation.
|
|
* Driver should set this to 4000 (4 milliseconds). */
|
|
__le16 agg_time_limit;
|
|
|
|
/*
|
|
* Number of Tx retries allowed for a frame, before that frame will
|
|
* no longer be considered for the start of an aggregation sequence
|
|
* (scheduler will then try to tx it as single frame).
|
|
* Driver should set this to 3.
|
|
*/
|
|
u8 agg_dis_start_th;
|
|
|
|
/*
|
|
* Maximum number of frames in aggregation.
|
|
* 0 = no limit (default). 1 = no aggregation.
|
|
* Other values = max # frames in aggregation.
|
|
*/
|
|
u8 agg_frame_cnt_limit;
|
|
|
|
__le32 reserved;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response)
|
|
*
|
|
* For 4965 only; 3945 uses REPLY_RATE_SCALE.
|
|
*
|
|
* Each station in the 4965's internal station table has its own table of 16
|
|
* Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when
|
|
* an ACK is not received. This command replaces the entire table for
|
|
* one station.
|
|
*
|
|
* NOTE: Station must already be in 4965's station table. Use REPLY_ADD_STA.
|
|
*
|
|
* The rate scaling procedures described below work well. Of course, other
|
|
* procedures are possible, and may work better for particular environments.
|
|
*
|
|
*
|
|
* FILLING THE RATE TABLE
|
|
*
|
|
* Given a particular initial rate and mode, as determined by the rate
|
|
* scaling algorithm described below, the Linux driver uses the following
|
|
* formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the
|
|
* Link Quality command:
|
|
*
|
|
*
|
|
* 1) If using High-throughput (HT) (SISO or MIMO) initial rate:
|
|
* a) Use this same initial rate for first 3 entries.
|
|
* b) Find next lower available rate using same mode (SISO or MIMO),
|
|
* use for next 3 entries. If no lower rate available, switch to
|
|
* legacy mode (no FAT channel, no MIMO, no short guard interval).
|
|
* c) If using MIMO, set command's mimo_delimiter to number of entries
|
|
* using MIMO (3 or 6).
|
|
* d) After trying 2 HT rates, switch to legacy mode (no FAT channel,
|
|
* no MIMO, no short guard interval), at the next lower bit rate
|
|
* (e.g. if second HT bit rate was 54, try 48 legacy), and follow
|
|
* legacy procedure for remaining table entries.
|
|
*
|
|
* 2) If using legacy initial rate:
|
|
* a) Use the initial rate for only one entry.
|
|
* b) For each following entry, reduce the rate to next lower available
|
|
* rate, until reaching the lowest available rate.
|
|
* c) When reducing rate, also switch antenna selection.
|
|
* d) Once lowest available rate is reached, repeat this rate until
|
|
* rate table is filled (16 entries), switching antenna each entry.
|
|
*
|
|
*
|
|
* ACCUMULATING HISTORY
|
|
*
|
|
* The rate scaling algorithm for 4965, as implemented in Linux driver, uses
|
|
* two sets of frame Tx success history: One for the current/active modulation
|
|
* mode, and one for a speculative/search mode that is being attempted. If the
|
|
* speculative mode turns out to be more effective (i.e. actual transfer
|
|
* rate is better), then the driver continues to use the speculative mode
|
|
* as the new current active mode.
|
|
*
|
|
* Each history set contains, separately for each possible rate, data for a
|
|
* sliding window of the 62 most recent tx attempts at that rate. The data
|
|
* includes a shifting bitmap of success(1)/failure(0), and sums of successful
|
|
* and attempted frames, from which the driver can additionally calculate a
|
|
* success ratio (success / attempted) and number of failures
|
|
* (attempted - success), and control the size of the window (attempted).
|
|
* The driver uses the bit map to remove successes from the success sum, as
|
|
* the oldest tx attempts fall out of the window.
|
|
*
|
|
* When the 4965 makes multiple tx attempts for a given frame, each attempt
|
|
* might be at a different rate, and have different modulation characteristics
|
|
* (e.g. antenna, fat channel, short guard interval), as set up in the rate
|
|
* scaling table in the Link Quality command. The driver must determine
|
|
* which rate table entry was used for each tx attempt, to determine which
|
|
* rate-specific history to update, and record only those attempts that
|
|
* match the modulation characteristics of the history set.
|
|
*
|
|
* When using block-ack (aggregation), all frames are transmitted at the same
|
|
* rate, since there is no per-attempt acknowledgement from the destination
|
|
* station. The Tx response struct iwl_tx_resp indicates the Tx rate in
|
|
* rate_n_flags field. After receiving a block-ack, the driver can update
|
|
* history for the entire block all at once.
|
|
*
|
|
*
|
|
* FINDING BEST STARTING RATE:
|
|
*
|
|
* When working with a selected initial modulation mode (see below), the
|
|
* driver attempts to find a best initial rate. The initial rate is the
|
|
* first entry in the Link Quality command's rate table.
|
|
*
|
|
* 1) Calculate actual throughput (success ratio * expected throughput, see
|
|
* table below) for current initial rate. Do this only if enough frames
|
|
* have been attempted to make the value meaningful: at least 6 failed
|
|
* tx attempts, or at least 8 successes. If not enough, don't try rate
|
|
* scaling yet.
|
|
*
|
|
* 2) Find available rates adjacent to current initial rate. Available means:
|
|
* a) supported by hardware &&
|
|
* b) supported by association &&
|
|
* c) within any constraints selected by user
|
|
*
|
|
* 3) Gather measured throughputs for adjacent rates. These might not have
|
|
* enough history to calculate a throughput. That's okay, we might try
|
|
* using one of them anyway!
|
|
*
|
|
* 4) Try decreasing rate if, for current rate:
|
|
* a) success ratio is < 15% ||
|
|
* b) lower adjacent rate has better measured throughput ||
|
|
* c) higher adjacent rate has worse throughput, and lower is unmeasured
|
|
*
|
|
* As a sanity check, if decrease was determined above, leave rate
|
|
* unchanged if:
|
|
* a) lower rate unavailable
|
|
* b) success ratio at current rate > 85% (very good)
|
|
* c) current measured throughput is better than expected throughput
|
|
* of lower rate (under perfect 100% tx conditions, see table below)
|
|
*
|
|
* 5) Try increasing rate if, for current rate:
|
|
* a) success ratio is < 15% ||
|
|
* b) both adjacent rates' throughputs are unmeasured (try it!) ||
|
|
* b) higher adjacent rate has better measured throughput ||
|
|
* c) lower adjacent rate has worse throughput, and higher is unmeasured
|
|
*
|
|
* As a sanity check, if increase was determined above, leave rate
|
|
* unchanged if:
|
|
* a) success ratio at current rate < 70%. This is not particularly
|
|
* good performance; higher rate is sure to have poorer success.
|
|
*
|
|
* 6) Re-evaluate the rate after each tx frame. If working with block-
|
|
* acknowledge, history and statistics may be calculated for the entire
|
|
* block (including prior history that fits within the history windows),
|
|
* before re-evaluation.
|
|
*
|
|
* FINDING BEST STARTING MODULATION MODE:
|
|
*
|
|
* After working with a modulation mode for a "while" (and doing rate scaling),
|
|
* the driver searches for a new initial mode in an attempt to improve
|
|
* throughput. The "while" is measured by numbers of attempted frames:
|
|
*
|
|
* For legacy mode, search for new mode after:
|
|
* 480 successful frames, or 160 failed frames
|
|
* For high-throughput modes (SISO or MIMO), search for new mode after:
|
|
* 4500 successful frames, or 400 failed frames
|
|
*
|
|
* Mode switch possibilities are (3 for each mode):
|
|
*
|
|
* For legacy:
|
|
* Change antenna, try SISO (if HT association), try MIMO (if HT association)
|
|
* For SISO:
|
|
* Change antenna, try MIMO, try shortened guard interval (SGI)
|
|
* For MIMO:
|
|
* Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI)
|
|
*
|
|
* When trying a new mode, use the same bit rate as the old/current mode when
|
|
* trying antenna switches and shortened guard interval. When switching to
|
|
* SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate
|
|
* for which the expected throughput (under perfect conditions) is about the
|
|
* same or slightly better than the actual measured throughput delivered by
|
|
* the old/current mode.
|
|
*
|
|
* Actual throughput can be estimated by multiplying the expected throughput
|
|
* by the success ratio (successful / attempted tx frames). Frame size is
|
|
* not considered in this calculation; it assumes that frame size will average
|
|
* out to be fairly consistent over several samples. The following are
|
|
* metric values for expected throughput assuming 100% success ratio.
|
|
* Only G band has support for CCK rates:
|
|
*
|
|
* RATE: 1 2 5 11 6 9 12 18 24 36 48 54 60
|
|
*
|
|
* G: 7 13 35 58 40 57 72 98 121 154 177 186 186
|
|
* A: 0 0 0 0 40 57 72 98 121 154 177 186 186
|
|
* SISO 20MHz: 0 0 0 0 42 42 76 102 124 159 183 193 202
|
|
* SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211
|
|
* MIMO 20MHz: 0 0 0 0 74 74 123 155 179 214 236 244 251
|
|
* SGI MIMO 20MHz: 0 0 0 0 81 81 131 164 188 222 243 251 257
|
|
* SISO 40MHz: 0 0 0 0 77 77 127 160 184 220 242 250 257
|
|
* SGI SISO 40MHz: 0 0 0 0 83 83 135 169 193 229 250 257 264
|
|
* MIMO 40MHz: 0 0 0 0 123 123 182 214 235 264 279 285 289
|
|
* SGI MIMO 40MHz: 0 0 0 0 131 131 191 222 242 270 284 289 293
|
|
*
|
|
* After the new mode has been tried for a short while (minimum of 6 failed
|
|
* frames or 8 successful frames), compare success ratio and actual throughput
|
|
* estimate of the new mode with the old. If either is better with the new
|
|
* mode, continue to use the new mode.
|
|
*
|
|
* Continue comparing modes until all 3 possibilities have been tried.
|
|
* If moving from legacy to HT, try all 3 possibilities from the new HT
|
|
* mode. After trying all 3, a best mode is found. Continue to use this mode
|
|
* for the longer "while" described above (e.g. 480 successful frames for
|
|
* legacy), and then repeat the search process.
|
|
*
|
|
*/
|
|
struct iwl4965_link_quality_cmd {
|
|
|
|
/* Index of destination/recipient station in uCode's station table */
|
|
u8 sta_id;
|
|
u8 reserved1;
|
|
__le16 control; /* not used */
|
|
struct iwl4965_link_qual_general_params general_params;
|
|
struct iwl4965_link_qual_agg_params agg_params;
|
|
|
|
/*
|
|
* Rate info; when using rate-scaling, Tx command's initial_rate_index
|
|
* specifies 1st Tx rate attempted, via index into this table.
|
|
* 4965 works its way through table when retrying Tx.
|
|
*/
|
|
struct {
|
|
__le32 rate_n_flags; /* RATE_MCS_*, IWL_RATE_* */
|
|
} rs_table[LINK_QUAL_MAX_RETRY_NUM];
|
|
__le32 reserved2;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_BT_CONFIG = 0x9b (command, has simple generic response)
|
|
*
|
|
* 3945 and 4965 support hardware handshake with Bluetooth device on
|
|
* same platform. Bluetooth device alerts wireless device when it will Tx;
|
|
* wireless device can delay or kill its own Tx to accomodate.
|
|
*/
|
|
struct iwl4965_bt_cmd {
|
|
u8 flags;
|
|
u8 lead_time;
|
|
u8 max_kill;
|
|
u8 reserved;
|
|
__le32 kill_ack_mask;
|
|
__le32 kill_cts_mask;
|
|
} __attribute__ ((packed));
|
|
|
|
/******************************************************************************
|
|
* (6)
|
|
* Spectrum Management (802.11h) Commands, Responses, Notifications:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/*
|
|
* Spectrum Management
|
|
*/
|
|
#define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \
|
|
RXON_FILTER_CTL2HOST_MSK | \
|
|
RXON_FILTER_ACCEPT_GRP_MSK | \
|
|
RXON_FILTER_DIS_DECRYPT_MSK | \
|
|
RXON_FILTER_DIS_GRP_DECRYPT_MSK | \
|
|
RXON_FILTER_ASSOC_MSK | \
|
|
RXON_FILTER_BCON_AWARE_MSK)
|
|
|
|
struct iwl4965_measure_channel {
|
|
__le32 duration; /* measurement duration in extended beacon
|
|
* format */
|
|
u8 channel; /* channel to measure */
|
|
u8 type; /* see enum iwl4965_measure_type */
|
|
__le16 reserved;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command)
|
|
*/
|
|
struct iwl4965_spectrum_cmd {
|
|
__le16 len; /* number of bytes starting from token */
|
|
u8 token; /* token id */
|
|
u8 id; /* measurement id -- 0 or 1 */
|
|
u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */
|
|
u8 periodic; /* 1 = periodic */
|
|
__le16 path_loss_timeout;
|
|
__le32 start_time; /* start time in extended beacon format */
|
|
__le32 reserved2;
|
|
__le32 flags; /* rxon flags */
|
|
__le32 filter_flags; /* rxon filter flags */
|
|
__le16 channel_count; /* minimum 1, maximum 10 */
|
|
__le16 reserved3;
|
|
struct iwl4965_measure_channel channels[10];
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response)
|
|
*/
|
|
struct iwl4965_spectrum_resp {
|
|
u8 token;
|
|
u8 id; /* id of the prior command replaced, or 0xff */
|
|
__le16 status; /* 0 - command will be handled
|
|
* 1 - cannot handle (conflicts with another
|
|
* measurement) */
|
|
} __attribute__ ((packed));
|
|
|
|
enum iwl4965_measurement_state {
|
|
IWL_MEASUREMENT_START = 0,
|
|
IWL_MEASUREMENT_STOP = 1,
|
|
};
|
|
|
|
enum iwl4965_measurement_status {
|
|
IWL_MEASUREMENT_OK = 0,
|
|
IWL_MEASUREMENT_CONCURRENT = 1,
|
|
IWL_MEASUREMENT_CSA_CONFLICT = 2,
|
|
IWL_MEASUREMENT_TGH_CONFLICT = 3,
|
|
/* 4-5 reserved */
|
|
IWL_MEASUREMENT_STOPPED = 6,
|
|
IWL_MEASUREMENT_TIMEOUT = 7,
|
|
IWL_MEASUREMENT_PERIODIC_FAILED = 8,
|
|
};
|
|
|
|
#define NUM_ELEMENTS_IN_HISTOGRAM 8
|
|
|
|
struct iwl4965_measurement_histogram {
|
|
__le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */
|
|
__le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */
|
|
} __attribute__ ((packed));
|
|
|
|
/* clear channel availability counters */
|
|
struct iwl4965_measurement_cca_counters {
|
|
__le32 ofdm;
|
|
__le32 cck;
|
|
} __attribute__ ((packed));
|
|
|
|
enum iwl4965_measure_type {
|
|
IWL_MEASURE_BASIC = (1 << 0),
|
|
IWL_MEASURE_CHANNEL_LOAD = (1 << 1),
|
|
IWL_MEASURE_HISTOGRAM_RPI = (1 << 2),
|
|
IWL_MEASURE_HISTOGRAM_NOISE = (1 << 3),
|
|
IWL_MEASURE_FRAME = (1 << 4),
|
|
/* bits 5:6 are reserved */
|
|
IWL_MEASURE_IDLE = (1 << 7),
|
|
};
|
|
|
|
/*
|
|
* SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command)
|
|
*/
|
|
struct iwl4965_spectrum_notification {
|
|
u8 id; /* measurement id -- 0 or 1 */
|
|
u8 token;
|
|
u8 channel_index; /* index in measurement channel list */
|
|
u8 state; /* 0 - start, 1 - stop */
|
|
__le32 start_time; /* lower 32-bits of TSF */
|
|
u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */
|
|
u8 channel;
|
|
u8 type; /* see enum iwl4965_measurement_type */
|
|
u8 reserved1;
|
|
/* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only
|
|
* valid if applicable for measurement type requested. */
|
|
__le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */
|
|
__le32 cca_cck; /* cca fraction time in 44Mhz clock periods */
|
|
__le32 cca_time; /* channel load time in usecs */
|
|
u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 -
|
|
* unidentified */
|
|
u8 reserved2[3];
|
|
struct iwl4965_measurement_histogram histogram;
|
|
__le32 stop_time; /* lower 32-bits of TSF */
|
|
__le32 status; /* see iwl4965_measurement_status */
|
|
} __attribute__ ((packed));
|
|
|
|
/******************************************************************************
|
|
* (7)
|
|
* Power Management Commands, Responses, Notifications:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/**
|
|
* struct iwl4965_powertable_cmd - Power Table Command
|
|
* @flags: See below:
|
|
*
|
|
* POWER_TABLE_CMD = 0x77 (command, has simple generic response)
|
|
*
|
|
* PM allow:
|
|
* bit 0 - '0' Driver not allow power management
|
|
* '1' Driver allow PM (use rest of parameters)
|
|
* uCode send sleep notifications:
|
|
* bit 1 - '0' Don't send sleep notification
|
|
* '1' send sleep notification (SEND_PM_NOTIFICATION)
|
|
* Sleep over DTIM
|
|
* bit 2 - '0' PM have to walk up every DTIM
|
|
* '1' PM could sleep over DTIM till listen Interval.
|
|
* PCI power managed
|
|
* bit 3 - '0' (PCI_LINK_CTRL & 0x1)
|
|
* '1' !(PCI_LINK_CTRL & 0x1)
|
|
* Force sleep Modes
|
|
* bit 31/30- '00' use both mac/xtal sleeps
|
|
* '01' force Mac sleep
|
|
* '10' force xtal sleep
|
|
* '11' Illegal set
|
|
*
|
|
* NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then
|
|
* ucode assume sleep over DTIM is allowed and we don't need to wakeup
|
|
* for every DTIM.
|
|
*/
|
|
#define IWL_POWER_VEC_SIZE 5
|
|
|
|
#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK __constant_cpu_to_le16(1 << 0)
|
|
#define IWL_POWER_SLEEP_OVER_DTIM_MSK __constant_cpu_to_le16(1 << 2)
|
|
#define IWL_POWER_PCI_PM_MSK __constant_cpu_to_le16(1 << 3)
|
|
|
|
struct iwl4965_powertable_cmd {
|
|
__le16 flags;
|
|
u8 keep_alive_seconds;
|
|
u8 debug_flags;
|
|
__le32 rx_data_timeout;
|
|
__le32 tx_data_timeout;
|
|
__le32 sleep_interval[IWL_POWER_VEC_SIZE];
|
|
__le32 keep_alive_beacons;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command)
|
|
* 3945 and 4965 identical.
|
|
*/
|
|
struct iwl4965_sleep_notification {
|
|
u8 pm_sleep_mode;
|
|
u8 pm_wakeup_src;
|
|
__le16 reserved;
|
|
__le32 sleep_time;
|
|
__le32 tsf_low;
|
|
__le32 bcon_timer;
|
|
} __attribute__ ((packed));
|
|
|
|
/* Sleep states. 3945 and 4965 identical. */
|
|
enum {
|
|
IWL_PM_NO_SLEEP = 0,
|
|
IWL_PM_SLP_MAC = 1,
|
|
IWL_PM_SLP_FULL_MAC_UNASSOCIATE = 2,
|
|
IWL_PM_SLP_FULL_MAC_CARD_STATE = 3,
|
|
IWL_PM_SLP_PHY = 4,
|
|
IWL_PM_SLP_REPENT = 5,
|
|
IWL_PM_WAKEUP_BY_TIMER = 6,
|
|
IWL_PM_WAKEUP_BY_DRIVER = 7,
|
|
IWL_PM_WAKEUP_BY_RFKILL = 8,
|
|
/* 3 reserved */
|
|
IWL_PM_NUM_OF_MODES = 12,
|
|
};
|
|
|
|
/*
|
|
* REPLY_CARD_STATE_CMD = 0xa0 (command, has simple generic response)
|
|
*/
|
|
#define CARD_STATE_CMD_DISABLE 0x00 /* Put card to sleep */
|
|
#define CARD_STATE_CMD_ENABLE 0x01 /* Wake up card */
|
|
#define CARD_STATE_CMD_HALT 0x02 /* Power down permanently */
|
|
struct iwl4965_card_state_cmd {
|
|
__le32 status; /* CARD_STATE_CMD_* request new power state */
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command)
|
|
*/
|
|
struct iwl4965_card_state_notif {
|
|
__le32 flags;
|
|
} __attribute__ ((packed));
|
|
|
|
#define HW_CARD_DISABLED 0x01
|
|
#define SW_CARD_DISABLED 0x02
|
|
#define RF_CARD_DISABLED 0x04
|
|
#define RXON_CARD_DISABLED 0x10
|
|
|
|
struct iwl4965_ct_kill_config {
|
|
__le32 reserved;
|
|
__le32 critical_temperature_M;
|
|
__le32 critical_temperature_R;
|
|
} __attribute__ ((packed));
|
|
|
|
/******************************************************************************
|
|
* (8)
|
|
* Scan Commands, Responses, Notifications:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/**
|
|
* struct iwl4965_scan_channel - entry in REPLY_SCAN_CMD channel table
|
|
*
|
|
* One for each channel in the scan list.
|
|
* Each channel can independently select:
|
|
* 1) SSID for directed active scans
|
|
* 2) Txpower setting (for rate specified within Tx command)
|
|
* 3) How long to stay on-channel (behavior may be modified by quiet_time,
|
|
* quiet_plcp_th, good_CRC_th)
|
|
*
|
|
* To avoid uCode errors, make sure the following are true (see comments
|
|
* under struct iwl4965_scan_cmd about max_out_time and quiet_time):
|
|
* 1) If using passive_dwell (i.e. passive_dwell != 0):
|
|
* active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
|
|
* 2) quiet_time <= active_dwell
|
|
* 3) If restricting off-channel time (i.e. max_out_time !=0):
|
|
* passive_dwell < max_out_time
|
|
* active_dwell < max_out_time
|
|
*/
|
|
struct iwl4965_scan_channel {
|
|
/*
|
|
* type is defined as:
|
|
* 0:0 1 = active, 0 = passive
|
|
* 1:4 SSID direct bit map; if a bit is set, then corresponding
|
|
* SSID IE is transmitted in probe request.
|
|
* 5:7 reserved
|
|
*/
|
|
u8 type;
|
|
u8 channel; /* band is selected by iwl4965_scan_cmd "flags" field */
|
|
struct iwl4965_tx_power tpc;
|
|
__le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
|
|
__le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct iwl4965_ssid_ie - directed scan network information element
|
|
*
|
|
* Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field
|
|
* in struct iwl4965_scan_channel; each channel may select different ssids from
|
|
* among the 4 entries. SSID IEs get transmitted in reverse order of entry.
|
|
*/
|
|
struct iwl4965_ssid_ie {
|
|
u8 id;
|
|
u8 len;
|
|
u8 ssid[32];
|
|
} __attribute__ ((packed));
|
|
|
|
#define PROBE_OPTION_MAX 0x4
|
|
#define TX_CMD_LIFE_TIME_INFINITE __constant_cpu_to_le32(0xFFFFFFFF)
|
|
#define IWL_GOOD_CRC_TH __constant_cpu_to_le16(1)
|
|
#define IWL_MAX_SCAN_SIZE 1024
|
|
|
|
/*
|
|
* REPLY_SCAN_CMD = 0x80 (command)
|
|
*
|
|
* The hardware scan command is very powerful; the driver can set it up to
|
|
* maintain (relatively) normal network traffic while doing a scan in the
|
|
* background. The max_out_time and suspend_time control the ratio of how
|
|
* long the device stays on an associated network channel ("service channel")
|
|
* vs. how long it's away from the service channel, i.e. tuned to other channels
|
|
* for scanning.
|
|
*
|
|
* max_out_time is the max time off-channel (in usec), and suspend_time
|
|
* is how long (in "extended beacon" format) that the scan is "suspended"
|
|
* after returning to the service channel. That is, suspend_time is the
|
|
* time that we stay on the service channel, doing normal work, between
|
|
* scan segments. The driver may set these parameters differently to support
|
|
* scanning when associated vs. not associated, and light vs. heavy traffic
|
|
* loads when associated.
|
|
*
|
|
* After receiving this command, the device's scan engine does the following;
|
|
*
|
|
* 1) Sends SCAN_START notification to driver
|
|
* 2) Checks to see if it has time to do scan for one channel
|
|
* 3) Sends NULL packet, with power-save (PS) bit set to 1,
|
|
* to tell AP that we're going off-channel
|
|
* 4) Tunes to first channel in scan list, does active or passive scan
|
|
* 5) Sends SCAN_RESULT notification to driver
|
|
* 6) Checks to see if it has time to do scan on *next* channel in list
|
|
* 7) Repeats 4-6 until it no longer has time to scan the next channel
|
|
* before max_out_time expires
|
|
* 8) Returns to service channel
|
|
* 9) Sends NULL packet with PS=0 to tell AP that we're back
|
|
* 10) Stays on service channel until suspend_time expires
|
|
* 11) Repeats entire process 2-10 until list is complete
|
|
* 12) Sends SCAN_COMPLETE notification
|
|
*
|
|
* For fast, efficient scans, the scan command also has support for staying on
|
|
* a channel for just a short time, if doing active scanning and getting no
|
|
* responses to the transmitted probe request. This time is controlled by
|
|
* quiet_time, and the number of received packets below which a channel is
|
|
* considered "quiet" is controlled by quiet_plcp_threshold.
|
|
*
|
|
* For active scanning on channels that have regulatory restrictions against
|
|
* blindly transmitting, the scan can listen before transmitting, to make sure
|
|
* that there is already legitimate activity on the channel. If enough
|
|
* packets are cleanly received on the channel (controlled by good_CRC_th,
|
|
* typical value 1), the scan engine starts transmitting probe requests.
|
|
*
|
|
* Driver must use separate scan commands for 2.4 vs. 5 GHz bands.
|
|
*
|
|
* To avoid uCode errors, see timing restrictions described under
|
|
* struct iwl4965_scan_channel.
|
|
*/
|
|
struct iwl4965_scan_cmd {
|
|
__le16 len;
|
|
u8 reserved0;
|
|
u8 channel_count; /* # channels in channel list */
|
|
__le16 quiet_time; /* dwell only this # millisecs on quiet channel
|
|
* (only for active scan) */
|
|
__le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */
|
|
__le16 good_CRC_th; /* passive -> active promotion threshold */
|
|
__le16 rx_chain; /* RXON_RX_CHAIN_* */
|
|
__le32 max_out_time; /* max usec to be away from associated (service)
|
|
* channel */
|
|
__le32 suspend_time; /* pause scan this long (in "extended beacon
|
|
* format") when returning to service chnl:
|
|
* 3945; 31:24 # beacons, 19:0 additional usec,
|
|
* 4965; 31:22 # beacons, 21:0 additional usec.
|
|
*/
|
|
__le32 flags; /* RXON_FLG_* */
|
|
__le32 filter_flags; /* RXON_FILTER_* */
|
|
|
|
/* For active scans (set to all-0s for passive scans).
|
|
* Does not include payload. Must specify Tx rate; no rate scaling. */
|
|
struct iwl4965_tx_cmd tx_cmd;
|
|
|
|
/* For directed active scans (set to all-0s otherwise) */
|
|
struct iwl4965_ssid_ie direct_scan[PROBE_OPTION_MAX];
|
|
|
|
/*
|
|
* Probe request frame, followed by channel list.
|
|
*
|
|
* Size of probe request frame is specified by byte count in tx_cmd.
|
|
* Channel list follows immediately after probe request frame.
|
|
* Number of channels in list is specified by channel_count.
|
|
* Each channel in list is of type:
|
|
*
|
|
* struct iwl4965_scan_channel channels[0];
|
|
*
|
|
* NOTE: Only one band of channels can be scanned per pass. You
|
|
* must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
|
|
* for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION)
|
|
* before requesting another scan.
|
|
*/
|
|
u8 data[0];
|
|
} __attribute__ ((packed));
|
|
|
|
/* Can abort will notify by complete notification with abort status. */
|
|
#define CAN_ABORT_STATUS __constant_cpu_to_le32(0x1)
|
|
/* complete notification statuses */
|
|
#define ABORT_STATUS 0x2
|
|
|
|
/*
|
|
* REPLY_SCAN_CMD = 0x80 (response)
|
|
*/
|
|
struct iwl4965_scanreq_notification {
|
|
__le32 status; /* 1: okay, 2: cannot fulfill request */
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* SCAN_START_NOTIFICATION = 0x82 (notification only, not a command)
|
|
*/
|
|
struct iwl4965_scanstart_notification {
|
|
__le32 tsf_low;
|
|
__le32 tsf_high;
|
|
__le32 beacon_timer;
|
|
u8 channel;
|
|
u8 band;
|
|
u8 reserved[2];
|
|
__le32 status;
|
|
} __attribute__ ((packed));
|
|
|
|
#define SCAN_OWNER_STATUS 0x1;
|
|
#define MEASURE_OWNER_STATUS 0x2;
|
|
|
|
#define NUMBER_OF_STATISTICS 1 /* first __le32 is good CRC */
|
|
/*
|
|
* SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command)
|
|
*/
|
|
struct iwl4965_scanresults_notification {
|
|
u8 channel;
|
|
u8 band;
|
|
u8 reserved[2];
|
|
__le32 tsf_low;
|
|
__le32 tsf_high;
|
|
__le32 statistics[NUMBER_OF_STATISTICS];
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command)
|
|
*/
|
|
struct iwl4965_scancomplete_notification {
|
|
u8 scanned_channels;
|
|
u8 status;
|
|
u8 reserved;
|
|
u8 last_channel;
|
|
__le32 tsf_low;
|
|
__le32 tsf_high;
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/******************************************************************************
|
|
* (9)
|
|
* IBSS/AP Commands and Notifications:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/*
|
|
* BEACON_NOTIFICATION = 0x90 (notification only, not a command)
|
|
*/
|
|
struct iwl4965_beacon_notif {
|
|
struct iwl4965_tx_resp beacon_notify_hdr;
|
|
__le32 low_tsf;
|
|
__le32 high_tsf;
|
|
__le32 ibss_mgr_status;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_TX_BEACON = 0x91 (command, has simple generic response)
|
|
*/
|
|
struct iwl4965_tx_beacon_cmd {
|
|
struct iwl4965_tx_cmd tx;
|
|
__le16 tim_idx;
|
|
u8 tim_size;
|
|
u8 reserved1;
|
|
struct ieee80211_hdr frame[0]; /* beacon frame */
|
|
} __attribute__ ((packed));
|
|
|
|
/******************************************************************************
|
|
* (10)
|
|
* Statistics Commands and Notifications:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#define IWL_TEMP_CONVERT 260
|
|
|
|
#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
|
|
#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
|
|
#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
|
|
|
|
/* Used for passing to driver number of successes and failures per rate */
|
|
struct rate_histogram {
|
|
union {
|
|
__le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
|
|
__le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
|
|
__le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
|
|
} success;
|
|
union {
|
|
__le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
|
|
__le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
|
|
__le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
|
|
} failed;
|
|
} __attribute__ ((packed));
|
|
|
|
/* statistics command response */
|
|
|
|
struct statistics_rx_phy {
|
|
__le32 ina_cnt;
|
|
__le32 fina_cnt;
|
|
__le32 plcp_err;
|
|
__le32 crc32_err;
|
|
__le32 overrun_err;
|
|
__le32 early_overrun_err;
|
|
__le32 crc32_good;
|
|
__le32 false_alarm_cnt;
|
|
__le32 fina_sync_err_cnt;
|
|
__le32 sfd_timeout;
|
|
__le32 fina_timeout;
|
|
__le32 unresponded_rts;
|
|
__le32 rxe_frame_limit_overrun;
|
|
__le32 sent_ack_cnt;
|
|
__le32 sent_cts_cnt;
|
|
__le32 sent_ba_rsp_cnt;
|
|
__le32 dsp_self_kill;
|
|
__le32 mh_format_err;
|
|
__le32 re_acq_main_rssi_sum;
|
|
__le32 reserved3;
|
|
} __attribute__ ((packed));
|
|
|
|
struct statistics_rx_ht_phy {
|
|
__le32 plcp_err;
|
|
__le32 overrun_err;
|
|
__le32 early_overrun_err;
|
|
__le32 crc32_good;
|
|
__le32 crc32_err;
|
|
__le32 mh_format_err;
|
|
__le32 agg_crc32_good;
|
|
__le32 agg_mpdu_cnt;
|
|
__le32 agg_cnt;
|
|
__le32 reserved2;
|
|
} __attribute__ ((packed));
|
|
|
|
struct statistics_rx_non_phy {
|
|
__le32 bogus_cts; /* CTS received when not expecting CTS */
|
|
__le32 bogus_ack; /* ACK received when not expecting ACK */
|
|
__le32 non_bssid_frames; /* number of frames with BSSID that
|
|
* doesn't belong to the STA BSSID */
|
|
__le32 filtered_frames; /* count frames that were dumped in the
|
|
* filtering process */
|
|
__le32 non_channel_beacons; /* beacons with our bss id but not on
|
|
* our serving channel */
|
|
__le32 channel_beacons; /* beacons with our bss id and in our
|
|
* serving channel */
|
|
__le32 num_missed_bcon; /* number of missed beacons */
|
|
__le32 adc_rx_saturation_time; /* count in 0.8us units the time the
|
|
* ADC was in saturation */
|
|
__le32 ina_detection_search_time;/* total time (in 0.8us) searched
|
|
* for INA */
|
|
__le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */
|
|
__le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */
|
|
__le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */
|
|
__le32 interference_data_flag; /* flag for interference data
|
|
* availability. 1 when data is
|
|
* available. */
|
|
__le32 channel_load; /* counts RX Enable time in uSec */
|
|
__le32 dsp_false_alarms; /* DSP false alarm (both OFDM
|
|
* and CCK) counter */
|
|
__le32 beacon_rssi_a;
|
|
__le32 beacon_rssi_b;
|
|
__le32 beacon_rssi_c;
|
|
__le32 beacon_energy_a;
|
|
__le32 beacon_energy_b;
|
|
__le32 beacon_energy_c;
|
|
} __attribute__ ((packed));
|
|
|
|
struct statistics_rx {
|
|
struct statistics_rx_phy ofdm;
|
|
struct statistics_rx_phy cck;
|
|
struct statistics_rx_non_phy general;
|
|
struct statistics_rx_ht_phy ofdm_ht;
|
|
} __attribute__ ((packed));
|
|
|
|
struct statistics_tx_non_phy_agg {
|
|
__le32 ba_timeout;
|
|
__le32 ba_reschedule_frames;
|
|
__le32 scd_query_agg_frame_cnt;
|
|
__le32 scd_query_no_agg;
|
|
__le32 scd_query_agg;
|
|
__le32 scd_query_mismatch;
|
|
__le32 frame_not_ready;
|
|
__le32 underrun;
|
|
__le32 bt_prio_kill;
|
|
__le32 rx_ba_rsp_cnt;
|
|
__le32 reserved2;
|
|
__le32 reserved3;
|
|
} __attribute__ ((packed));
|
|
|
|
struct statistics_tx {
|
|
__le32 preamble_cnt;
|
|
__le32 rx_detected_cnt;
|
|
__le32 bt_prio_defer_cnt;
|
|
__le32 bt_prio_kill_cnt;
|
|
__le32 few_bytes_cnt;
|
|
__le32 cts_timeout;
|
|
__le32 ack_timeout;
|
|
__le32 expected_ack_cnt;
|
|
__le32 actual_ack_cnt;
|
|
__le32 dump_msdu_cnt;
|
|
__le32 burst_abort_next_frame_mismatch_cnt;
|
|
__le32 burst_abort_missing_next_frame_cnt;
|
|
__le32 cts_timeout_collision;
|
|
__le32 ack_or_ba_timeout_collision;
|
|
struct statistics_tx_non_phy_agg agg;
|
|
} __attribute__ ((packed));
|
|
|
|
struct statistics_dbg {
|
|
__le32 burst_check;
|
|
__le32 burst_count;
|
|
__le32 reserved[4];
|
|
} __attribute__ ((packed));
|
|
|
|
struct statistics_div {
|
|
__le32 tx_on_a;
|
|
__le32 tx_on_b;
|
|
__le32 exec_time;
|
|
__le32 probe_time;
|
|
__le32 reserved1;
|
|
__le32 reserved2;
|
|
} __attribute__ ((packed));
|
|
|
|
struct statistics_general {
|
|
__le32 temperature;
|
|
__le32 temperature_m;
|
|
struct statistics_dbg dbg;
|
|
__le32 sleep_time;
|
|
__le32 slots_out;
|
|
__le32 slots_idle;
|
|
__le32 ttl_timestamp;
|
|
struct statistics_div div;
|
|
__le32 rx_enable_counter;
|
|
__le32 reserved1;
|
|
__le32 reserved2;
|
|
__le32 reserved3;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* REPLY_STATISTICS_CMD = 0x9c,
|
|
* 3945 and 4965 identical.
|
|
*
|
|
* This command triggers an immediate response containing uCode statistics.
|
|
* The response is in the same format as STATISTICS_NOTIFICATION 0x9d, below.
|
|
*
|
|
* If the CLEAR_STATS configuration flag is set, uCode will clear its
|
|
* internal copy of the statistics (counters) after issuing the response.
|
|
* This flag does not affect STATISTICS_NOTIFICATIONs after beacons (see below).
|
|
*
|
|
* If the DISABLE_NOTIF configuration flag is set, uCode will not issue
|
|
* STATISTICS_NOTIFICATIONs after received beacons (see below). This flag
|
|
* does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself.
|
|
*/
|
|
#define IWL_STATS_CONF_CLEAR_STATS __constant_cpu_to_le32(0x1) /* see above */
|
|
#define IWL_STATS_CONF_DISABLE_NOTIF __constant_cpu_to_le32(0x2)/* see above */
|
|
struct iwl4965_statistics_cmd {
|
|
__le32 configuration_flags; /* IWL_STATS_CONF_* */
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* STATISTICS_NOTIFICATION = 0x9d (notification only, not a command)
|
|
*
|
|
* By default, uCode issues this notification after receiving a beacon
|
|
* while associated. To disable this behavior, set DISABLE_NOTIF flag in the
|
|
* REPLY_STATISTICS_CMD 0x9c, above.
|
|
*
|
|
* Statistics counters continue to increment beacon after beacon, but are
|
|
* cleared when changing channels or when driver issues REPLY_STATISTICS_CMD
|
|
* 0x9c with CLEAR_STATS bit set (see above).
|
|
*
|
|
* uCode also issues this notification during scans. uCode clears statistics
|
|
* appropriately so that each notification contains statistics for only the
|
|
* one channel that has just been scanned.
|
|
*/
|
|
#define STATISTICS_REPLY_FLG_BAND_24G_MSK __constant_cpu_to_le32(0x2)
|
|
#define STATISTICS_REPLY_FLG_FAT_MODE_MSK __constant_cpu_to_le32(0x8)
|
|
struct iwl4965_notif_statistics {
|
|
__le32 flag;
|
|
struct statistics_rx rx;
|
|
struct statistics_tx tx;
|
|
struct statistics_general general;
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/*
|
|
* MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command)
|
|
*/
|
|
/* if ucode missed CONSECUTIVE_MISSED_BCONS_TH beacons in a row,
|
|
* then this notification will be sent. */
|
|
#define CONSECUTIVE_MISSED_BCONS_TH 20
|
|
|
|
struct iwl4965_missed_beacon_notif {
|
|
__le32 consequtive_missed_beacons;
|
|
__le32 total_missed_becons;
|
|
__le32 num_expected_beacons;
|
|
__le32 num_recvd_beacons;
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/******************************************************************************
|
|
* (11)
|
|
* Rx Calibration Commands:
|
|
*
|
|
* With the uCode used for open source drivers, most Tx calibration (except
|
|
* for Tx Power) and most Rx calibration is done by uCode during the
|
|
* "initialize" phase of uCode boot. Driver must calibrate only:
|
|
*
|
|
* 1) Tx power (depends on temperature), described elsewhere
|
|
* 2) Receiver gain balance (optimize MIMO, and detect disconnected antennas)
|
|
* 3) Receiver sensitivity (to optimize signal detection)
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/**
|
|
* SENSITIVITY_CMD = 0xa8 (command, has simple generic response)
|
|
*
|
|
* This command sets up the Rx signal detector for a sensitivity level that
|
|
* is high enough to lock onto all signals within the associated network,
|
|
* but low enough to ignore signals that are below a certain threshold, so as
|
|
* not to have too many "false alarms". False alarms are signals that the
|
|
* Rx DSP tries to lock onto, but then discards after determining that they
|
|
* are noise.
|
|
*
|
|
* The optimum number of false alarms is between 5 and 50 per 200 TUs
|
|
* (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e.
|
|
* time listening, not transmitting). Driver must adjust sensitivity so that
|
|
* the ratio of actual false alarms to actual Rx time falls within this range.
|
|
*
|
|
* While associated, uCode delivers STATISTICS_NOTIFICATIONs after each
|
|
* received beacon. These provide information to the driver to analyze the
|
|
* sensitivity. Don't analyze statistics that come in from scanning, or any
|
|
* other non-associated-network source. Pertinent statistics include:
|
|
*
|
|
* From "general" statistics (struct statistics_rx_non_phy):
|
|
*
|
|
* (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level)
|
|
* Measure of energy of desired signal. Used for establishing a level
|
|
* below which the device does not detect signals.
|
|
*
|
|
* (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB)
|
|
* Measure of background noise in silent period after beacon.
|
|
*
|
|
* channel_load
|
|
* uSecs of actual Rx time during beacon period (varies according to
|
|
* how much time was spent transmitting).
|
|
*
|
|
* From "cck" and "ofdm" statistics (struct statistics_rx_phy), separately:
|
|
*
|
|
* false_alarm_cnt
|
|
* Signal locks abandoned early (before phy-level header).
|
|
*
|
|
* plcp_err
|
|
* Signal locks abandoned late (during phy-level header).
|
|
*
|
|
* NOTE: Both false_alarm_cnt and plcp_err increment monotonically from
|
|
* beacon to beacon, i.e. each value is an accumulation of all errors
|
|
* before and including the latest beacon. Values will wrap around to 0
|
|
* after counting up to 2^32 - 1. Driver must differentiate vs.
|
|
* previous beacon's values to determine # false alarms in the current
|
|
* beacon period.
|
|
*
|
|
* Total number of false alarms = false_alarms + plcp_errs
|
|
*
|
|
* For OFDM, adjust the following table entries in struct iwl_sensitivity_cmd
|
|
* (notice that the start points for OFDM are at or close to settings for
|
|
* maximum sensitivity):
|
|
*
|
|
* START / MIN / MAX
|
|
* HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX 90 / 85 / 120
|
|
* HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX 170 / 170 / 210
|
|
* HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX 105 / 105 / 140
|
|
* HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX 220 / 220 / 270
|
|
*
|
|
* If actual rate of OFDM false alarms (+ plcp_errors) is too high
|
|
* (greater than 50 for each 204.8 msecs listening), reduce sensitivity
|
|
* by *adding* 1 to all 4 of the table entries above, up to the max for
|
|
* each entry. Conversely, if false alarm rate is too low (less than 5
|
|
* for each 204.8 msecs listening), *subtract* 1 from each entry to
|
|
* increase sensitivity.
|
|
*
|
|
* For CCK sensitivity, keep track of the following:
|
|
*
|
|
* 1). 20-beacon history of maximum background noise, indicated by
|
|
* (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the
|
|
* 3 receivers. For any given beacon, the "silence reference" is
|
|
* the maximum of last 60 samples (20 beacons * 3 receivers).
|
|
*
|
|
* 2). 10-beacon history of strongest signal level, as indicated
|
|
* by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers,
|
|
* i.e. the strength of the signal through the best receiver at the
|
|
* moment. These measurements are "upside down", with lower values
|
|
* for stronger signals, so max energy will be *minimum* value.
|
|
*
|
|
* Then for any given beacon, the driver must determine the *weakest*
|
|
* of the strongest signals; this is the minimum level that needs to be
|
|
* successfully detected, when using the best receiver at the moment.
|
|
* "Max cck energy" is the maximum (higher value means lower energy!)
|
|
* of the last 10 minima. Once this is determined, driver must add
|
|
* a little margin by adding "6" to it.
|
|
*
|
|
* 3). Number of consecutive beacon periods with too few false alarms.
|
|
* Reset this to 0 at the first beacon period that falls within the
|
|
* "good" range (5 to 50 false alarms per 204.8 milliseconds rx).
|
|
*
|
|
* Then, adjust the following CCK table entries in struct iwl_sensitivity_cmd
|
|
* (notice that the start points for CCK are at maximum sensitivity):
|
|
*
|
|
* START / MIN / MAX
|
|
* HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX 125 / 125 / 200
|
|
* HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX 200 / 200 / 400
|
|
* HD_MIN_ENERGY_CCK_DET_INDEX 100 / 0 / 100
|
|
*
|
|
* If actual rate of CCK false alarms (+ plcp_errors) is too high
|
|
* (greater than 50 for each 204.8 msecs listening), method for reducing
|
|
* sensitivity is:
|
|
*
|
|
* 1) *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX,
|
|
* up to max 400.
|
|
*
|
|
* 2) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is < 160,
|
|
* sensitivity has been reduced a significant amount; bring it up to
|
|
* a moderate 161. Otherwise, *add* 3, up to max 200.
|
|
*
|
|
* 3) a) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is > 160,
|
|
* sensitivity has been reduced only a moderate or small amount;
|
|
* *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_INDEX,
|
|
* down to min 0. Otherwise (if gain has been significantly reduced),
|
|
* don't change the HD_MIN_ENERGY_CCK_DET_INDEX value.
|
|
*
|
|
* b) Save a snapshot of the "silence reference".
|
|
*
|
|
* If actual rate of CCK false alarms (+ plcp_errors) is too low
|
|
* (less than 5 for each 204.8 msecs listening), method for increasing
|
|
* sensitivity is used only if:
|
|
*
|
|
* 1a) Previous beacon did not have too many false alarms
|
|
* 1b) AND difference between previous "silence reference" and current
|
|
* "silence reference" (prev - current) is 2 or more,
|
|
* OR 2) 100 or more consecutive beacon periods have had rate of
|
|
* less than 5 false alarms per 204.8 milliseconds rx time.
|
|
*
|
|
* Method for increasing sensitivity:
|
|
*
|
|
* 1) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX,
|
|
* down to min 125.
|
|
*
|
|
* 2) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX,
|
|
* down to min 200.
|
|
*
|
|
* 3) *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_INDEX, up to max 100.
|
|
*
|
|
* If actual rate of CCK false alarms (+ plcp_errors) is within good range
|
|
* (between 5 and 50 for each 204.8 msecs listening):
|
|
*
|
|
* 1) Save a snapshot of the silence reference.
|
|
*
|
|
* 2) If previous beacon had too many CCK false alarms (+ plcp_errors),
|
|
* give some extra margin to energy threshold by *subtracting* 8
|
|
* from value in HD_MIN_ENERGY_CCK_DET_INDEX.
|
|
*
|
|
* For all cases (too few, too many, good range), make sure that the CCK
|
|
* detection threshold (energy) is below the energy level for robust
|
|
* detection over the past 10 beacon periods, the "Max cck energy".
|
|
* Lower values mean higher energy; this means making sure that the value
|
|
* in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy".
|
|
*
|
|
* Driver should set the following entries to fixed values:
|
|
*
|
|
* HD_MIN_ENERGY_OFDM_DET_INDEX 100
|
|
* HD_BARKER_CORR_TH_ADD_MIN_INDEX 190
|
|
* HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX 390
|
|
* HD_OFDM_ENERGY_TH_IN_INDEX 62
|
|
*/
|
|
|
|
/*
|
|
* Table entries in SENSITIVITY_CMD (struct iwl4965_sensitivity_cmd)
|
|
*/
|
|
#define HD_TABLE_SIZE (11) /* number of entries */
|
|
#define HD_MIN_ENERGY_CCK_DET_INDEX (0) /* table indexes */
|
|
#define HD_MIN_ENERGY_OFDM_DET_INDEX (1)
|
|
#define HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX (2)
|
|
#define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX (3)
|
|
#define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX (4)
|
|
#define HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX (5)
|
|
#define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX (6)
|
|
#define HD_BARKER_CORR_TH_ADD_MIN_INDEX (7)
|
|
#define HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX (8)
|
|
#define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX (9)
|
|
#define HD_OFDM_ENERGY_TH_IN_INDEX (10)
|
|
|
|
/* Control field in struct iwl4965_sensitivity_cmd */
|
|
#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE __constant_cpu_to_le16(0)
|
|
#define SENSITIVITY_CMD_CONTROL_WORK_TABLE __constant_cpu_to_le16(1)
|
|
|
|
/**
|
|
* struct iwl4965_sensitivity_cmd
|
|
* @control: (1) updates working table, (0) updates default table
|
|
* @table: energy threshold values, use HD_* as index into table
|
|
*
|
|
* Always use "1" in "control" to update uCode's working table and DSP.
|
|
*/
|
|
struct iwl4965_sensitivity_cmd {
|
|
__le16 control; /* always use "1" */
|
|
__le16 table[HD_TABLE_SIZE]; /* use HD_* as index */
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/**
|
|
* REPLY_PHY_CALIBRATION_CMD = 0xb0 (command, has simple generic response)
|
|
*
|
|
* This command sets the relative gains of 4965's 3 radio receiver chains.
|
|
*
|
|
* After the first association, driver should accumulate signal and noise
|
|
* statistics from the STATISTICS_NOTIFICATIONs that follow the first 20
|
|
* beacons from the associated network (don't collect statistics that come
|
|
* in from scanning, or any other non-network source).
|
|
*
|
|
* DISCONNECTED ANTENNA:
|
|
*
|
|
* Driver should determine which antennas are actually connected, by comparing
|
|
* average beacon signal levels for the 3 Rx chains. Accumulate (add) the
|
|
* following values over 20 beacons, one accumulator for each of the chains
|
|
* a/b/c, from struct statistics_rx_non_phy:
|
|
*
|
|
* beacon_rssi_[abc] & 0x0FF (unsigned, units in dB)
|
|
*
|
|
* Find the strongest signal from among a/b/c. Compare the other two to the
|
|
* strongest. If any signal is more than 15 dB (times 20, unless you
|
|
* divide the accumulated values by 20) below the strongest, the driver
|
|
* considers that antenna to be disconnected, and should not try to use that
|
|
* antenna/chain for Rx or Tx. If both A and B seem to be disconnected,
|
|
* driver should declare the stronger one as connected, and attempt to use it
|
|
* (A and B are the only 2 Tx chains!).
|
|
*
|
|
*
|
|
* RX BALANCE:
|
|
*
|
|
* Driver should balance the 3 receivers (but just the ones that are connected
|
|
* to antennas, see above) for gain, by comparing the average signal levels
|
|
* detected during the silence after each beacon (background noise).
|
|
* Accumulate (add) the following values over 20 beacons, one accumulator for
|
|
* each of the chains a/b/c, from struct statistics_rx_non_phy:
|
|
*
|
|
* beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB)
|
|
*
|
|
* Find the weakest background noise level from among a/b/c. This Rx chain
|
|
* will be the reference, with 0 gain adjustment. Attenuate other channels by
|
|
* finding noise difference:
|
|
*
|
|
* (accum_noise[i] - accum_noise[reference]) / 30
|
|
*
|
|
* The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB.
|
|
* For use in diff_gain_[abc] fields of struct iwl_calibration_cmd, the
|
|
* driver should limit the difference results to a range of 0-3 (0-4.5 dB),
|
|
* and set bit 2 to indicate "reduce gain". The value for the reference
|
|
* (weakest) chain should be "0".
|
|
*
|
|
* diff_gain_[abc] bit fields:
|
|
* 2: (1) reduce gain, (0) increase gain
|
|
* 1-0: amount of gain, units of 1.5 dB
|
|
*/
|
|
|
|
/* "Differential Gain" opcode used in REPLY_PHY_CALIBRATION_CMD. */
|
|
#define PHY_CALIBRATE_DIFF_GAIN_CMD (7)
|
|
|
|
struct iwl4965_calibration_cmd {
|
|
u8 opCode; /* PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
|
|
u8 flags; /* not used */
|
|
__le16 reserved;
|
|
s8 diff_gain_a; /* see above */
|
|
s8 diff_gain_b;
|
|
s8 diff_gain_c;
|
|
u8 reserved1;
|
|
} __attribute__ ((packed));
|
|
|
|
/******************************************************************************
|
|
* (12)
|
|
* Miscellaneous Commands:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/*
|
|
* LEDs Command & Response
|
|
* REPLY_LEDS_CMD = 0x48 (command, has simple generic response)
|
|
*
|
|
* For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field),
|
|
* this command turns it on or off, or sets up a periodic blinking cycle.
|
|
*/
|
|
struct iwl4965_led_cmd {
|
|
__le32 interval; /* "interval" in uSec */
|
|
u8 id; /* 1: Activity, 2: Link, 3: Tech */
|
|
u8 off; /* # intervals off while blinking;
|
|
* "0", with >0 "on" value, turns LED on */
|
|
u8 on; /* # intervals on while blinking;
|
|
* "0", regardless of "off", turns LED off */
|
|
u8 reserved;
|
|
} __attribute__ ((packed));
|
|
|
|
/******************************************************************************
|
|
* (13)
|
|
* Union of all expected notifications/responses:
|
|
*
|
|
*****************************************************************************/
|
|
|
|
struct iwl4965_rx_packet {
|
|
__le32 len;
|
|
struct iwl4965_cmd_header hdr;
|
|
union {
|
|
struct iwl4965_alive_resp alive_frame;
|
|
struct iwl4965_rx_frame rx_frame;
|
|
struct iwl4965_tx_resp tx_resp;
|
|
struct iwl4965_spectrum_notification spectrum_notif;
|
|
struct iwl4965_csa_notification csa_notif;
|
|
struct iwl4965_error_resp err_resp;
|
|
struct iwl4965_card_state_notif card_state_notif;
|
|
struct iwl4965_beacon_notif beacon_status;
|
|
struct iwl4965_add_sta_resp add_sta;
|
|
struct iwl4965_sleep_notification sleep_notif;
|
|
struct iwl4965_spectrum_resp spectrum;
|
|
struct iwl4965_notif_statistics stats;
|
|
struct iwl4965_compressed_ba_resp compressed_ba;
|
|
struct iwl4965_missed_beacon_notif missed_beacon;
|
|
__le32 status;
|
|
u8 raw[0];
|
|
} u;
|
|
} __attribute__ ((packed));
|
|
|
|
#define IWL_RX_FRAME_SIZE (4 + sizeof(struct iwl4965_rx_frame))
|
|
|
|
#endif /* __iwl4965_commands_h__ */
|