android_kernel_motorola_sm6225/drivers/usb
Sebastian Andrzej Siewior 1d16638e3b usb: gadget: dummy: fix enumeration with g_multi
If we do have endpoints named like "ep-a" then bEndpointAddress is
counted internally by the gadget framework.

If we do have endpoints named like "ep-1" then bEndpointAddress is
assigned from the digit after "ep-".

If we do have both, then it is likely that after we used up the
"generic" endpoints we will use the digits and thus assign one
bEndpointAddress to multiple endpoints.

This theory can be proofed by using the completely enabled g_multi.
Without this patch, the mass storage won't enumerate and times out
because it shares endpoints with RNDIS.

This patch also adds fills up the endpoints list so we have in total
endpoints 1 to 15 in + out available while some of them are restricted
to certain types like BULK or ISO. Without this change the nokia gadget
won't load because the system does not provide enough (BULK) endpoints
but it did before ep-a - ep-f were removed.

Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-12-13 11:58:46 +02:00
..
atm Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq 2012-10-02 09:54:49 -07:00
c67x00 usb: remove use of __devexit 2012-11-21 13:27:17 -08:00
chipidea USB: chipidea: fix use after free bug 2012-11-26 14:59:00 -08:00
class cdc-acm: implement TIOCSSERIAL to avoid blocking close(2) 2012-11-15 17:39:03 -08:00
core USB: core: Free the allocated memory before exiting on error 2012-11-21 13:32:26 -08:00
dwc3 usb: dwc3: debugfs: fix regdump offset 2012-12-13 11:58:38 +02:00
early fix build of EHCI debug port code when USB_CHIPIDEA but !USB_EHCI_HCD 2012-11-02 10:13:33 -07:00
gadget usb: gadget: dummy: fix enumeration with g_multi 2012-12-13 11:58:46 +02:00
host usb: host: ehci-mv: fix clk APIs 2012-12-13 11:58:41 +02:00
image
misc ezusb: add dependency to USB 2012-11-26 14:57:20 -08:00
mon mm: kill vma flag VM_RESERVED and mm->reserved_vm counter 2012-10-09 16:22:19 +09:00
musb ARM: arm-soc: Header cleanups 2012-12-12 11:45:16 -08:00
otg usb: otg: mv_otg: fix the clk APIs 2012-12-13 11:58:45 +02:00
phy usb: remove use of __devexit 2012-11-21 13:27:17 -08:00
renesas_usbhs usb: renesas_usbhs: mod_host: fixup usbhsh_ureq_free() timing 2012-12-13 11:58:44 +02:00
serial USB patches for 3.8-rc1 2012-12-11 14:48:20 -08:00
storage USB patches for 3.8-rc1 2012-12-11 14:48:20 -08:00
wusbcore WUSB: remove an unnused variable 2012-10-22 11:33:34 -07:00
Kconfig ARM: soc: general cleanups 2012-10-01 18:19:05 -07:00
Makefile usb: phy: Fix Kconfig dependency for Phy drivers 2012-06-26 16:14:33 -07:00
README
usb-common.c
usb-skeleton.c USB: usb-skeleton.c: fix compilation error and restored kref_put on fail in skel_open 2012-10-24 14:40:50 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.