e6b6239f8e
This patch adds the Freescale MPC86xADS board support. The supported devices are SMC UART and 10Mbit ethernet on SCC1. The manual for the board says that it "is compatible with the MPC8xxFADS for software point of view". That's why this patch extends FADS instead of introducing a new platform. FEC is not supported as the "combined FCC/FEC ethernet driver" driver by Pantelis Antoniou should replace the current FEC driver. Signed-off-by: Gennadiy Kurtsman <gkurtsman@ru.mvista.com> Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com> Acked-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
92 lines
2.9 KiB
C
92 lines
2.9 KiB
C
/*
|
|
* A collection of structures, addresses, and values associated with
|
|
* the Freescale MPC885ADS board.
|
|
* Copied from the FADS stuff.
|
|
*
|
|
* Author: MontaVista Software, Inc.
|
|
* source@mvista.com
|
|
*
|
|
* 2005 (c) MontaVista Software, Inc. This file is licensed under the
|
|
* terms of the GNU General Public License version 2. This program is licensed
|
|
* "as is" without any warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#ifdef __KERNEL__
|
|
#ifndef __ASM_MPC885ADS_H__
|
|
#define __ASM_MPC885ADS_H__
|
|
|
|
#include <linux/config.h>
|
|
|
|
#include <asm/ppcboot.h>
|
|
|
|
/* U-Boot maps BCSR to 0xff080000 */
|
|
#define BCSR_ADDR ((uint)0xff080000)
|
|
#define BCSR_SIZE ((uint)32)
|
|
#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
|
|
#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
|
|
#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
|
|
#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
|
|
#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
|
|
|
|
#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
|
|
#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
|
|
|
|
#define IMAP_ADDR ((uint)0xff000000)
|
|
#define IMAP_SIZE ((uint)(64 * 1024))
|
|
|
|
#define PCMCIA_MEM_ADDR ((uint)0xff020000)
|
|
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
|
|
|
|
/* Bits of interest in the BCSRs.
|
|
*/
|
|
#define BCSR1_ETHEN ((uint)0x20000000)
|
|
#define BCSR1_IRDAEN ((uint)0x10000000)
|
|
#define BCSR1_RS232EN_1 ((uint)0x01000000)
|
|
#define BCSR1_PCCEN ((uint)0x00800000)
|
|
#define BCSR1_PCCVCC0 ((uint)0x00400000)
|
|
#define BCSR1_PCCVPP0 ((uint)0x00200000)
|
|
#define BCSR1_PCCVPP1 ((uint)0x00100000)
|
|
#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
|
|
#define BCSR1_RS232EN_2 ((uint)0x00040000)
|
|
#define BCSR1_PCCVCC1 ((uint)0x00010000)
|
|
#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
|
|
|
|
#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/
|
|
#define BCSR4_USB_LO_SPD ((uint)0x04000000)
|
|
#define BCSR4_USB_VCC ((uint)0x02000000)
|
|
#define BCSR4_USB_FULL_SPD ((uint)0x00040000)
|
|
#define BCSR4_USB_EN ((uint)0x00020000)
|
|
|
|
#define BCSR5_MII2_EN 0x40
|
|
#define BCSR5_MII2_RST 0x20
|
|
#define BCSR5_T1_RST 0x10
|
|
#define BCSR5_ATM155_RST 0x08
|
|
#define BCSR5_ATM25_RST 0x04
|
|
#define BCSR5_MII1_EN 0x02
|
|
#define BCSR5_MII1_RST 0x01
|
|
|
|
/* Interrupt level assignments */
|
|
#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */
|
|
#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */
|
|
#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */
|
|
#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */
|
|
|
|
/* We don't use the 8259 */
|
|
#define NR_8259_INTS 0
|
|
|
|
/* CPM Ethernet through SCC3 */
|
|
#define PA_ENET_RXD ((ushort)0x0040)
|
|
#define PA_ENET_TXD ((ushort)0x0080)
|
|
#define PE_ENET_TCLK ((uint)0x00004000)
|
|
#define PE_ENET_RCLK ((uint)0x00008000)
|
|
#define PE_ENET_TENA ((uint)0x00000010)
|
|
#define PC_ENET_CLSN ((ushort)0x0400)
|
|
#define PC_ENET_RENA ((ushort)0x0800)
|
|
|
|
/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
|
|
* SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
|
|
#define SICR_ENET_MASK ((uint)0x00ff0000)
|
|
#define SICR_ENET_CLKRT ((uint)0x002c0000)
|
|
|
|
#endif /* __ASM_MPC885ADS_H__ */
|
|
#endif /* __KERNEL__ */
|