aa8f0dc6c3
Jens Axboe pointed out that the iounmap() call in libata was occurring too early, and some drivers (ahci, probably others) were using ioremap'd memory after it had been unmapped. The patch should address that problem by way of improving the libata driver API: * move ->host_stop() call after all ->port_stop() calls have occurred. * create default helper function ata_host_stop(), and move iounmap() call there. * add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark). sata_qstor appears to require the host-stop-before-port-stop ordering that existed prior to applying the attached patch.
720 lines
19 KiB
C
720 lines
19 KiB
C
/*
|
|
* sata_qstor.c - Pacific Digital Corporation QStor SATA
|
|
*
|
|
* Maintained by: Mark Lord <mlord@pobox.com>
|
|
*
|
|
* Copyright 2005 Pacific Digital Corporation.
|
|
* (OSL/GPL code release authorized by Jalil Fadavi).
|
|
*
|
|
* The contents of this file are subject to the Open
|
|
* Software License version 1.1 that can be found at
|
|
* http://www.opensource.org/licenses/osl-1.1.txt and is included herein
|
|
* by reference.
|
|
*
|
|
* Alternatively, the contents of this file may be used under the terms
|
|
* of the GNU General Public License version 2 (the "GPL") as distributed
|
|
* in the kernel source COPYING file, in which case the provisions of
|
|
* the GPL are applicable instead of the above. If you wish to allow
|
|
* the use of your version of this file only under the terms of the
|
|
* GPL and not to allow others to use your version of this file under
|
|
* the OSL, indicate your decision by deleting the provisions above and
|
|
* replace them with the notice and other provisions required by the GPL.
|
|
* If you do not delete the provisions above, a recipient may use your
|
|
* version of this file under either the OSL or the GPL.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include <asm/io.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "sata_qstor"
|
|
#define DRV_VERSION "0.04"
|
|
|
|
enum {
|
|
QS_PORTS = 4,
|
|
QS_MAX_PRD = LIBATA_MAX_PRD,
|
|
QS_CPB_ORDER = 6,
|
|
QS_CPB_BYTES = (1 << QS_CPB_ORDER),
|
|
QS_PRD_BYTES = QS_MAX_PRD * 16,
|
|
QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES,
|
|
|
|
QS_DMA_BOUNDARY = ~0UL,
|
|
|
|
/* global register offsets */
|
|
QS_HCF_CNFG3 = 0x0003, /* host configuration offset */
|
|
QS_HID_HPHY = 0x0004, /* host physical interface info */
|
|
QS_HCT_CTRL = 0x00e4, /* global interrupt mask offset */
|
|
QS_HST_SFF = 0x0100, /* host status fifo offset */
|
|
QS_HVS_SERD3 = 0x0393, /* PHY enable offset */
|
|
|
|
/* global control bits */
|
|
QS_HPHY_64BIT = (1 << 1), /* 64-bit bus detected */
|
|
QS_CNFG3_GSRST = 0x01, /* global chip reset */
|
|
QS_SERD3_PHY_ENA = 0xf0, /* PHY detection ENAble*/
|
|
|
|
/* per-channel register offsets */
|
|
QS_CCF_CPBA = 0x0710, /* chan CPB base address */
|
|
QS_CCF_CSEP = 0x0718, /* chan CPB separation factor */
|
|
QS_CFC_HUFT = 0x0800, /* host upstream fifo threshold */
|
|
QS_CFC_HDFT = 0x0804, /* host downstream fifo threshold */
|
|
QS_CFC_DUFT = 0x0808, /* dev upstream fifo threshold */
|
|
QS_CFC_DDFT = 0x080c, /* dev downstream fifo threshold */
|
|
QS_CCT_CTR0 = 0x0900, /* chan control-0 offset */
|
|
QS_CCT_CTR1 = 0x0901, /* chan control-1 offset */
|
|
QS_CCT_CFF = 0x0a00, /* chan command fifo offset */
|
|
|
|
/* channel control bits */
|
|
QS_CTR0_REG = (1 << 1), /* register mode (vs. pkt mode) */
|
|
QS_CTR0_CLER = (1 << 2), /* clear channel errors */
|
|
QS_CTR1_RDEV = (1 << 1), /* sata phy/comms reset */
|
|
QS_CTR1_RCHN = (1 << 4), /* reset channel logic */
|
|
QS_CCF_RUN_PKT = 0x107, /* RUN a new dma PKT */
|
|
|
|
/* pkt sub-field headers */
|
|
QS_HCB_HDR = 0x01, /* Host Control Block header */
|
|
QS_DCB_HDR = 0x02, /* Device Control Block header */
|
|
|
|
/* pkt HCB flag bits */
|
|
QS_HF_DIRO = (1 << 0), /* data DIRection Out */
|
|
QS_HF_DAT = (1 << 3), /* DATa pkt */
|
|
QS_HF_IEN = (1 << 4), /* Interrupt ENable */
|
|
QS_HF_VLD = (1 << 5), /* VaLiD pkt */
|
|
|
|
/* pkt DCB flag bits */
|
|
QS_DF_PORD = (1 << 2), /* Pio OR Dma */
|
|
QS_DF_ELBA = (1 << 3), /* Extended LBA (lba48) */
|
|
|
|
/* PCI device IDs */
|
|
board_2068_idx = 0, /* QStor 4-port SATA/RAID */
|
|
};
|
|
|
|
typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t;
|
|
|
|
struct qs_port_priv {
|
|
u8 *pkt;
|
|
dma_addr_t pkt_dma;
|
|
qs_state_t state;
|
|
};
|
|
|
|
static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg);
|
|
static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static irqreturn_t qs_intr (int irq, void *dev_instance, struct pt_regs *regs);
|
|
static int qs_port_start(struct ata_port *ap);
|
|
static void qs_host_stop(struct ata_host_set *host_set);
|
|
static void qs_port_stop(struct ata_port *ap);
|
|
static void qs_phy_reset(struct ata_port *ap);
|
|
static void qs_qc_prep(struct ata_queued_cmd *qc);
|
|
static int qs_qc_issue(struct ata_queued_cmd *qc);
|
|
static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static void qs_bmdma_stop(struct ata_port *ap);
|
|
static u8 qs_bmdma_status(struct ata_port *ap);
|
|
static void qs_irq_clear(struct ata_port *ap);
|
|
static void qs_eng_timeout(struct ata_port *ap);
|
|
|
|
static Scsi_Host_Template qs_ata_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.eh_strategy_handler = ata_scsi_error,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = QS_MAX_PRD,
|
|
.max_sectors = ATA_MAX_SECTORS,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
//FIXME .use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = QS_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static struct ata_port_operations qs_ata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.check_atapi_dma = qs_check_atapi_dma,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
.phy_reset = qs_phy_reset,
|
|
.qc_prep = qs_qc_prep,
|
|
.qc_issue = qs_qc_issue,
|
|
.eng_timeout = qs_eng_timeout,
|
|
.irq_handler = qs_intr,
|
|
.irq_clear = qs_irq_clear,
|
|
.scr_read = qs_scr_read,
|
|
.scr_write = qs_scr_write,
|
|
.port_start = qs_port_start,
|
|
.port_stop = qs_port_stop,
|
|
.host_stop = qs_host_stop,
|
|
.bmdma_stop = qs_bmdma_stop,
|
|
.bmdma_status = qs_bmdma_status,
|
|
};
|
|
|
|
static struct ata_port_info qs_port_info[] = {
|
|
/* board_2068_idx */
|
|
{
|
|
.sht = &qs_ata_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_SATA_RESET |
|
|
//FIXME ATA_FLAG_SRST |
|
|
ATA_FLAG_MMIO,
|
|
.pio_mask = 0x10, /* pio4 */
|
|
.udma_mask = 0x7f, /* udma0-6 */
|
|
.port_ops = &qs_ata_ops,
|
|
},
|
|
};
|
|
|
|
static struct pci_device_id qs_ata_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_PDC, 0x2068, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_2068_idx },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver qs_ata_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = qs_ata_pci_tbl,
|
|
.probe = qs_ata_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static int qs_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
return 1; /* ATAPI DMA not supported */
|
|
}
|
|
|
|
static void qs_bmdma_stop(struct ata_port *ap)
|
|
{
|
|
/* nothing */
|
|
}
|
|
|
|
static u8 qs_bmdma_status(struct ata_port *ap)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void qs_irq_clear(struct ata_port *ap)
|
|
{
|
|
/* nothing */
|
|
}
|
|
|
|
static inline void qs_enter_reg_mode(struct ata_port *ap)
|
|
{
|
|
u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
|
|
|
|
writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
|
|
readb(chan + QS_CCT_CTR0); /* flush */
|
|
}
|
|
|
|
static inline void qs_reset_channel_logic(struct ata_port *ap)
|
|
{
|
|
u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
|
|
|
|
writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1);
|
|
readb(chan + QS_CCT_CTR0); /* flush */
|
|
qs_enter_reg_mode(ap);
|
|
}
|
|
|
|
static void qs_phy_reset(struct ata_port *ap)
|
|
{
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
|
|
pp->state = qs_state_idle;
|
|
qs_reset_channel_logic(ap);
|
|
sata_phy_reset(ap);
|
|
}
|
|
|
|
static void qs_eng_timeout(struct ata_port *ap)
|
|
{
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
|
|
if (pp->state != qs_state_idle) /* healthy paranoia */
|
|
pp->state = qs_state_mmio;
|
|
qs_reset_channel_logic(ap);
|
|
ata_eng_timeout(ap);
|
|
}
|
|
|
|
static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return ~0U;
|
|
return readl((void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8)));
|
|
}
|
|
|
|
static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return;
|
|
writel(val, (void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8)));
|
|
}
|
|
|
|
static void qs_fill_sg(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scatterlist *sg = qc->sg;
|
|
struct ata_port *ap = qc->ap;
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
unsigned int nelem;
|
|
u8 *prd = pp->pkt + QS_CPB_BYTES;
|
|
|
|
assert(sg != NULL);
|
|
assert(qc->n_elem > 0);
|
|
|
|
for (nelem = 0; nelem < qc->n_elem; nelem++,sg++) {
|
|
u64 addr;
|
|
u32 len;
|
|
|
|
addr = sg_dma_address(sg);
|
|
*(__le64 *)prd = cpu_to_le64(addr);
|
|
prd += sizeof(u64);
|
|
|
|
len = sg_dma_len(sg);
|
|
*(__le32 *)prd = cpu_to_le32(len);
|
|
prd += sizeof(u64);
|
|
|
|
VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem,
|
|
(unsigned long long)addr, len);
|
|
}
|
|
}
|
|
|
|
static void qs_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct qs_port_priv *pp = qc->ap->private_data;
|
|
u8 dflags = QS_DF_PORD, *buf = pp->pkt;
|
|
u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD;
|
|
u64 addr;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
qs_enter_reg_mode(qc->ap);
|
|
if (qc->tf.protocol != ATA_PROT_DMA) {
|
|
ata_qc_prep(qc);
|
|
return;
|
|
}
|
|
|
|
qs_fill_sg(qc);
|
|
|
|
if ((qc->tf.flags & ATA_TFLAG_WRITE))
|
|
hflags |= QS_HF_DIRO;
|
|
if ((qc->tf.flags & ATA_TFLAG_LBA48))
|
|
dflags |= QS_DF_ELBA;
|
|
|
|
/* host control block (HCB) */
|
|
buf[ 0] = QS_HCB_HDR;
|
|
buf[ 1] = hflags;
|
|
*(__le32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE);
|
|
*(__le32 *)(&buf[ 8]) = cpu_to_le32(qc->n_elem);
|
|
addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES;
|
|
*(__le64 *)(&buf[16]) = cpu_to_le64(addr);
|
|
|
|
/* device control block (DCB) */
|
|
buf[24] = QS_DCB_HDR;
|
|
buf[28] = dflags;
|
|
|
|
/* frame information structure (FIS) */
|
|
ata_tf_to_fis(&qc->tf, &buf[32], 0);
|
|
}
|
|
|
|
static inline void qs_packet_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
|
|
|
|
VPRINTK("ENTER, ap %p\n", ap);
|
|
|
|
writeb(QS_CTR0_CLER, chan + QS_CCT_CTR0);
|
|
wmb(); /* flush PRDs and pkt to memory */
|
|
writel(QS_CCF_RUN_PKT, chan + QS_CCT_CFF);
|
|
readl(chan + QS_CCT_CFF); /* flush */
|
|
}
|
|
|
|
static int qs_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct qs_port_priv *pp = qc->ap->private_data;
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
|
|
pp->state = qs_state_pkt;
|
|
qs_packet_start(qc);
|
|
return 0;
|
|
|
|
case ATA_PROT_ATAPI_DMA:
|
|
BUG();
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
pp->state = qs_state_mmio;
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set)
|
|
{
|
|
unsigned int handled = 0;
|
|
u8 sFFE;
|
|
u8 __iomem *mmio_base = host_set->mmio_base;
|
|
|
|
do {
|
|
u32 sff0 = readl(mmio_base + QS_HST_SFF);
|
|
u32 sff1 = readl(mmio_base + QS_HST_SFF + 4);
|
|
u8 sEVLD = (sff1 >> 30) & 0x01; /* valid flag */
|
|
sFFE = sff1 >> 31; /* empty flag */
|
|
|
|
if (sEVLD) {
|
|
u8 sDST = sff0 >> 16; /* dev status */
|
|
u8 sHST = sff1 & 0x3f; /* host status */
|
|
unsigned int port_no = (sff1 >> 8) & 0x03;
|
|
struct ata_port *ap = host_set->ports[port_no];
|
|
|
|
DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n",
|
|
sff1, sff0, port_no, sHST, sDST);
|
|
handled = 1;
|
|
if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
|
|
struct ata_queued_cmd *qc;
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
if (!pp || pp->state != qs_state_pkt)
|
|
continue;
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
|
|
switch (sHST) {
|
|
case 0: /* sucessful CPB */
|
|
case 3: /* device error */
|
|
pp->state = qs_state_idle;
|
|
qs_enter_reg_mode(qc->ap);
|
|
ata_qc_complete(qc, sDST);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
} while (!sFFE);
|
|
return handled;
|
|
}
|
|
|
|
static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set)
|
|
{
|
|
unsigned int handled = 0, port_no;
|
|
|
|
for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
|
|
struct ata_port *ap;
|
|
ap = host_set->ports[port_no];
|
|
if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
|
|
struct ata_queued_cmd *qc;
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
if (!pp || pp->state != qs_state_mmio)
|
|
continue;
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
|
|
|
|
/* check main status, clearing INTRQ */
|
|
u8 status = ata_chk_status(ap);
|
|
if ((status & ATA_BUSY))
|
|
continue;
|
|
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
|
|
ap->id, qc->tf.protocol, status);
|
|
|
|
/* complete taskfile transaction */
|
|
pp->state = qs_state_idle;
|
|
ata_qc_complete(qc, status);
|
|
handled = 1;
|
|
}
|
|
}
|
|
}
|
|
return handled;
|
|
}
|
|
|
|
static irqreturn_t qs_intr(int irq, void *dev_instance, struct pt_regs *regs)
|
|
{
|
|
struct ata_host_set *host_set = dev_instance;
|
|
unsigned int handled = 0;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
spin_lock(&host_set->lock);
|
|
handled = qs_intr_pkt(host_set) | qs_intr_mmio(host_set);
|
|
spin_unlock(&host_set->lock);
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void qs_ata_setup_port(struct ata_ioports *port, unsigned long base)
|
|
{
|
|
port->cmd_addr =
|
|
port->data_addr = base + 0x400;
|
|
port->error_addr =
|
|
port->feature_addr = base + 0x408; /* hob_feature = 0x409 */
|
|
port->nsect_addr = base + 0x410; /* hob_nsect = 0x411 */
|
|
port->lbal_addr = base + 0x418; /* hob_lbal = 0x419 */
|
|
port->lbam_addr = base + 0x420; /* hob_lbam = 0x421 */
|
|
port->lbah_addr = base + 0x428; /* hob_lbah = 0x429 */
|
|
port->device_addr = base + 0x430;
|
|
port->status_addr =
|
|
port->command_addr = base + 0x438;
|
|
port->altstatus_addr =
|
|
port->ctl_addr = base + 0x440;
|
|
port->scr_addr = base + 0xc00;
|
|
}
|
|
|
|
static int qs_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct qs_port_priv *pp;
|
|
void __iomem *mmio_base = ap->host_set->mmio_base;
|
|
void __iomem *chan = mmio_base + (ap->port_no * 0x4000);
|
|
u64 addr;
|
|
int rc;
|
|
|
|
rc = ata_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
qs_enter_reg_mode(ap);
|
|
pp = kcalloc(1, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp) {
|
|
rc = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
pp->pkt = dma_alloc_coherent(dev, QS_PKT_BYTES, &pp->pkt_dma,
|
|
GFP_KERNEL);
|
|
if (!pp->pkt) {
|
|
rc = -ENOMEM;
|
|
goto err_out_kfree;
|
|
}
|
|
memset(pp->pkt, 0, QS_PKT_BYTES);
|
|
ap->private_data = pp;
|
|
|
|
addr = (u64)pp->pkt_dma;
|
|
writel((u32) addr, chan + QS_CCF_CPBA);
|
|
writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4);
|
|
return 0;
|
|
|
|
err_out_kfree:
|
|
kfree(pp);
|
|
err_out:
|
|
ata_port_stop(ap);
|
|
return rc;
|
|
}
|
|
|
|
static void qs_port_stop(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct qs_port_priv *pp = ap->private_data;
|
|
|
|
if (pp != NULL) {
|
|
ap->private_data = NULL;
|
|
if (pp->pkt != NULL)
|
|
dma_free_coherent(dev, QS_PKT_BYTES, pp->pkt,
|
|
pp->pkt_dma);
|
|
kfree(pp);
|
|
}
|
|
ata_port_stop(ap);
|
|
}
|
|
|
|
static void qs_host_stop(struct ata_host_set *host_set)
|
|
{
|
|
void __iomem *mmio_base = host_set->mmio_base;
|
|
|
|
writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
|
|
writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
|
|
|
|
ata_host_stop(host_set);
|
|
}
|
|
|
|
static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
|
|
{
|
|
void __iomem *mmio_base = pe->mmio_base;
|
|
unsigned int port_no;
|
|
|
|
writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
|
|
writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
|
|
|
|
/* reset each channel in turn */
|
|
for (port_no = 0; port_no < pe->n_ports; ++port_no) {
|
|
u8 __iomem *chan = mmio_base + (port_no * 0x4000);
|
|
writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1);
|
|
writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
|
|
readb(chan + QS_CCT_CTR0); /* flush */
|
|
}
|
|
writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */
|
|
|
|
for (port_no = 0; port_no < pe->n_ports; ++port_no) {
|
|
u8 __iomem *chan = mmio_base + (port_no * 0x4000);
|
|
/* set FIFO depths to same settings as Windows driver */
|
|
writew(32, chan + QS_CFC_HUFT);
|
|
writew(32, chan + QS_CFC_HDFT);
|
|
writew(10, chan + QS_CFC_DUFT);
|
|
writew( 8, chan + QS_CFC_DDFT);
|
|
/* set CPB size in bytes, as a power of two */
|
|
writeb(QS_CPB_ORDER, chan + QS_CCF_CSEP);
|
|
}
|
|
writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */
|
|
}
|
|
|
|
/*
|
|
* The QStor understands 64-bit buses, and uses 64-bit fields
|
|
* for DMA pointers regardless of bus width. We just have to
|
|
* make sure our DMA masks are set appropriately for whatever
|
|
* bridge lies between us and the QStor, and then the DMA mapping
|
|
* code will ensure we only ever "see" appropriate buffer addresses.
|
|
* If we're 32-bit limited somewhere, then our 64-bit fields will
|
|
* just end up with zeros in the upper 32-bits, without any special
|
|
* logic required outside of this routine (below).
|
|
*/
|
|
static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
|
|
{
|
|
u32 bus_info = readl(mmio_base + QS_HID_HPHY);
|
|
int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
|
|
|
|
if (have_64bit_bus &&
|
|
!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
|
|
if (rc) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
printk(KERN_ERR DRV_NAME
|
|
"(%s): 64-bit DMA enable failed\n",
|
|
pci_name(pdev));
|
|
return rc;
|
|
}
|
|
}
|
|
} else {
|
|
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
printk(KERN_ERR DRV_NAME
|
|
"(%s): 32-bit DMA enable failed\n",
|
|
pci_name(pdev));
|
|
return rc;
|
|
}
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
printk(KERN_ERR DRV_NAME
|
|
"(%s): 32-bit consistent DMA enable failed\n",
|
|
pci_name(pdev));
|
|
return rc;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int qs_ata_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
struct ata_probe_ent *probe_ent = NULL;
|
|
void __iomem *mmio_base;
|
|
unsigned int board_idx = (unsigned int) ent->driver_data;
|
|
int rc, port_no;
|
|
|
|
if (!printed_version++)
|
|
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) {
|
|
rc = -ENODEV;
|
|
goto err_out_regions;
|
|
}
|
|
|
|
mmio_base = ioremap(pci_resource_start(pdev, 4),
|
|
pci_resource_len(pdev, 4));
|
|
if (mmio_base == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_regions;
|
|
}
|
|
|
|
rc = qs_set_dma_masks(pdev, mmio_base);
|
|
if (rc)
|
|
goto err_out_iounmap;
|
|
|
|
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
|
|
if (probe_ent == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
memset(probe_ent, 0, sizeof(*probe_ent));
|
|
probe_ent->dev = pci_dev_to_dev(pdev);
|
|
INIT_LIST_HEAD(&probe_ent->node);
|
|
|
|
probe_ent->sht = qs_port_info[board_idx].sht;
|
|
probe_ent->host_flags = qs_port_info[board_idx].host_flags;
|
|
probe_ent->pio_mask = qs_port_info[board_idx].pio_mask;
|
|
probe_ent->mwdma_mask = qs_port_info[board_idx].mwdma_mask;
|
|
probe_ent->udma_mask = qs_port_info[board_idx].udma_mask;
|
|
probe_ent->port_ops = qs_port_info[board_idx].port_ops;
|
|
|
|
probe_ent->irq = pdev->irq;
|
|
probe_ent->irq_flags = SA_SHIRQ;
|
|
probe_ent->mmio_base = mmio_base;
|
|
probe_ent->n_ports = QS_PORTS;
|
|
|
|
for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
|
|
unsigned long chan = (unsigned long)mmio_base +
|
|
(port_no * 0x4000);
|
|
qs_ata_setup_port(&probe_ent->port[port_no], chan);
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* initialize adapter */
|
|
qs_host_init(board_idx, probe_ent);
|
|
|
|
rc = ata_device_add(probe_ent);
|
|
kfree(probe_ent);
|
|
if (rc != QS_PORTS)
|
|
goto err_out_iounmap;
|
|
return 0;
|
|
|
|
err_out_iounmap:
|
|
iounmap(mmio_base);
|
|
err_out_regions:
|
|
pci_release_regions(pdev);
|
|
err_out:
|
|
pci_disable_device(pdev);
|
|
return rc;
|
|
}
|
|
|
|
static int __init qs_ata_init(void)
|
|
{
|
|
return pci_module_init(&qs_ata_pci_driver);
|
|
}
|
|
|
|
static void __exit qs_ata_exit(void)
|
|
{
|
|
pci_unregister_driver(&qs_ata_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Mark Lord");
|
|
MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, qs_ata_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(qs_ata_init);
|
|
module_exit(qs_ata_exit);
|