asgardius/android_kernel_motorola_sm6225
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_kernel_motorola_sm6225/drivers/media/dvb/dvb-usb/anysee.h
Antti Palosaari 9fdd9caf44 V4L/DVB (8032): Anysee: fix Kconfig 
- select DVB_PLL
- fix typos in comments

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:09:33 -03:00

304 lines
14 KiB
C
Raw Blame History

/*
* DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
*
* Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* TODO:
* - add smart card reader support for Conditional Access (CA)
*
* Card reader in Anysee is nothing more than ISO 7816 card reader.
* There is no hardware CAM in any Anysee device sold.
* In my understanding it should be implemented by making own module
* for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
* module registers serial interface that can be used to communicate
* with any ISO 7816 smart card.
*
* Any help according to implement serial smart card reader support
* is highly welcome!
*/
#ifndef _DVB_USB_ANYSEE_H_
#define _DVB_USB_ANYSEE_H_
#define DVB_USB_LOG_PREFIX "anysee"
#include "dvb-usb.h"
#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args)
#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args)
#define deb_rc(args...) dprintk(dvb_usb_anysee_debug, 0x04, args)
#define deb_reg(args...) dprintk(dvb_usb_anysee_debug, 0x08, args)
#define deb_i2c(args...) dprintk(dvb_usb_anysee_debug, 0x10, args)
#define deb_fw(args...) dprintk(dvb_usb_anysee_debug, 0x20, args)
enum cmd {
CMD_I2C_READ = 0x33,
CMD_I2C_WRITE = 0x31,
CMD_REG_READ = 0xb0,
CMD_REG_WRITE = 0xb1,
CMD_STREAMING_CTRL = 0x12,
CMD_LED_AND_IR_CTRL = 0x16,
CMD_GET_IR_CODE = 0x41,
CMD_GET_HW_INFO = 0x19,
CMD_SMARTCARD = 0x34,
};
struct anysee_state {
u8 tuner;
u8 seq;
};
#endif
/***************************************************************************
* USB API description (reverse engineered)
***************************************************************************
Transaction flow:
=================
BULK[00001] >>> REQUEST PACKET 64 bytes
BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY)
BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY)
General reply packet(s) are always used if not own reply defined.
============================================================================
| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY)
============================================================================
| 00 | reply data (if any) from previous transaction
| | Just same reply packet as returned during previous transaction.
| | Needed only if reply is missed in previous transaction.
| | Just skip normally.
----------------------------------------------------------------------------
| 01-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY)
============================================================================
| 00 | reply data (if any)
----------------------------------------------------------------------------
| 01-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | I2C WRITE REQUEST PACKET
============================================================================
| 00 | 0x31 I2C write command
----------------------------------------------------------------------------
| 01 | i2c address
----------------------------------------------------------------------------
| 02 | data length
| | 0x02 (for typical I2C reg / val pair)
----------------------------------------------------------------------------
| 03 | 0x01
----------------------------------------------------------------------------
| 04- | data
----------------------------------------------------------------------------
| -59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | I2C READ REQUEST PACKET
============================================================================
| 00 | 0x33 I2C read command
----------------------------------------------------------------------------
| 01 | i2c address + 1
----------------------------------------------------------------------------
| 02 | register
----------------------------------------------------------------------------
| 03 | 0x00
----------------------------------------------------------------------------
| 04 | 0x00
----------------------------------------------------------------------------
| 05 | 0x01
----------------------------------------------------------------------------
| 06-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET
============================================================================
| 00 | 0xb1 register write command
----------------------------------------------------------------------------
| 01-02 | register
----------------------------------------------------------------------------
| 03 | 0x01
----------------------------------------------------------------------------
| 04 | value
----------------------------------------------------------------------------
| 05-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET
============================================================================
| 00 | 0xb0 register read command
----------------------------------------------------------------------------
| 01-02 | register
----------------------------------------------------------------------------
| 03 | 0x01
----------------------------------------------------------------------------
| 04-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | LED CONTROL REQUEST PACKET
============================================================================
| 00 | 0x16 LED and IR control command
----------------------------------------------------------------------------
| 01 | 0x01 (LED)
----------------------------------------------------------------------------
| 03 | 0x00 blink
| | 0x01 lights continuously
----------------------------------------------------------------------------
| 04 | blink interval
| | 0x00 fastest (looks like LED lights continuously)
| | 0xff slowest
----------------------------------------------------------------------------
| 05-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | IR CONTROL REQUEST PACKET
============================================================================
| 00 | 0x16 LED and IR control command
----------------------------------------------------------------------------
| 01 | 0x02 (IR)
----------------------------------------------------------------------------
| 03 | 0x00 IR disabled
| | 0x01 IR enabled
----------------------------------------------------------------------------
| 04-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | STREAMING CONTROL REQUEST PACKET
============================================================================
| 00 | 0x12 streaming control command
----------------------------------------------------------------------------
| 01 | 0x00 streaming disabled
| | 0x01 streaming enabled
----------------------------------------------------------------------------
| 02 | 0x00
----------------------------------------------------------------------------
| 03-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | REMOTE CONTROL REQUEST PACKET
============================================================================
| 00 | 0x41 remote control command
----------------------------------------------------------------------------
| 01-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | REMOTE CONTROL REPLY PACKET
============================================================================
| 00 | 0x00 code not received
| | 0x01 code received
----------------------------------------------------------------------------
| 01 | remote control code
----------------------------------------------------------------------------
| 02-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | GET HARDWARE INFO REQUEST PACKET
============================================================================
| 00 | 0x19 get hardware info command
----------------------------------------------------------------------------
| 01-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | GET HARDWARE INFO REPLY PACKET
============================================================================
| 00 | hardware id
----------------------------------------------------------------------------
| 01-02 | firmware version
----------------------------------------------------------------------------
| 03-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | SMART CARD READER PACKET
============================================================================
| 00 | 0x34 smart card reader command
----------------------------------------------------------------------------
| xx |
----------------------------------------------------------------------------
| xx-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
*/
Reference in a new issue View git blame Copy permalink