asgardius/android_kernel_motorola_sm6225
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_kernel_motorola_sm6225/drivers/media/video/tda9875.c
Hans Verkuil 8bf2f8e747 V4L/DVB (3577): Cleanup audio input handling 
Cleanup audio input handling in bttv and tvaudio:
- inputs were specified that were never used
- mute was handled as a special input which led to confusing code
- confusing naming made it difficult to see if the setting was for
  i2c or gpio.
The old audiochip.h input names moved to tvaudio.h. Currently this
is used both by tvaudio and msp3400 until the msp3400 implements the
new msp3400-specific inputs.
Detect in bttv the tvaudio and msp3400 i2c clients and use these
client pointers to set the inputs directly instead of broadcasting the
command.
Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be
replaced again later by the new ROUTING commands.
Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is
a user level command and not to be used internally. It wasn't called at
all anyway.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-24 16:26:56 -03:00

399 lines
11 KiB
C
Raw Blame History

/*
* For the TDA9875 chip
* (The TDA9875 is used on the Diamond DTV2000 french version
* Other cards probably use these chips as well.)
* This driver will not complain if used with any
* other i2c device with the same address.
*
* Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source and
* Eric Sandeen
* This code is placed under the terms of the GNU General Public License
* Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu)
* Which was based on tda8425.c by Greg Alexander (c) 1998
*
* OPTIONS:
* debug - set to 1 if you'd like to see debug messages
*
* Revision: 0.1 - original version
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/videodev.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/init.h>
#include <media/i2c-addr.h>
static int debug; /* insmod parameter */
module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_LICENSE("GPL");
/* Addresses to scan */
static unsigned short normal_i2c[] = {
I2C_ADDR_TDA9875 >> 1,
I2C_CLIENT_END
};
I2C_CLIENT_INSMOD;
/* This is a superset of the TDA9875 */
struct tda9875 {
int rvol, lvol;
int bass, treble;
struct i2c_client c;
};
static struct i2c_driver driver;
static struct i2c_client client_template;
#define dprintk if (debug) printk
/* The TDA9875 is made by Philips Semiconductor
* http://www.semiconductors.philips.com
* TDA9875: I2C-bus controlled DSP audio processor, FM demodulator
*
*/
/* subaddresses for TDA9875 */
#define TDA9875_MUT 0x12 /*General mute (value --> 0b11001100*/
#define TDA9875_CFG 0x01 /* Config register (value --> 0b00000000 */
#define TDA9875_DACOS 0x13 /*DAC i/o select (ADC) 0b0000100*/
#define TDA9875_LOSR 0x16 /*Line output select regirter 0b0100 0001*/
#define TDA9875_CH1V 0x0c /*Channel 1 volume (mute)*/
#define TDA9875_CH2V 0x0d /*Channel 2 volume (mute)*/
#define TDA9875_SC1 0x14 /*SCART 1 in (mono)*/
#define TDA9875_SC2 0x15 /*SCART 2 in (mono)*/
#define TDA9875_ADCIS 0x17 /*ADC input select (mono) 0b0110 000*/
#define TDA9875_AER 0x19 /*Audio effect (AVL+Pseudo) 0b0000 0110*/
#define TDA9875_MCS 0x18 /*Main channel select (DAC) 0b0000100*/
#define TDA9875_MVL 0x1a /* Main volume gauche */
#define TDA9875_MVR 0x1b /* Main volume droite */
#define TDA9875_MBA 0x1d /* Main Basse */
#define TDA9875_MTR 0x1e /* Main treble */
#define TDA9875_ACS 0x1f /* Auxilary channel select (FM) 0b0000000*/
#define TDA9875_AVL 0x20 /* Auxilary volume gauche */
#define TDA9875_AVR 0x21 /* Auxilary volume droite */
#define TDA9875_ABA 0x22 /* Auxilary Basse */
#define TDA9875_ATR 0x23 /* Auxilary treble */
#define TDA9875_MSR 0x02 /* Monitor select register */
#define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */
#define TDA9875_C1MIB 0x04 /* Carrier 1 (FM) frequency register (16-8]b */
#define TDA9875_C1LSB 0x05 /* Carrier 1 (FM) frequency register LSB */
#define TDA9875_C2MSB 0x06 /* Carrier 2 (nicam) frequency register MSB */
#define TDA9875_C2MIB 0x07 /* Carrier 2 (nicam) frequency register (16-8]b */
#define TDA9875_C2LSB 0x08 /* Carrier 2 (nicam) frequency register LSB */
#define TDA9875_DCR 0x09 /* Demodulateur configuration regirter*/
#define TDA9875_DEEM 0x0a /* FM de-emphasis regirter*/
#define TDA9875_FMAT 0x0b /* FM Matrix regirter*/
/* values */
#define TDA9875_MUTE_ON 0xff /* general mute */
#define TDA9875_MUTE_OFF 0xcc /* general no mute */
/* Begin code */
static int tda9875_write(struct i2c_client *client, int subaddr, unsigned char val)
{
unsigned char buffer[2];
dprintk("In tda9875_write\n");
dprintk("Writing %d 0x%x\n", subaddr, val);
buffer[0] = subaddr;
buffer[1] = val;
if (2 != i2c_master_send(client,buffer,2)) {
printk(KERN_WARNING "tda9875: I/O error, trying (write %d 0x%x)\n",
subaddr, val);
return -1;
}
return 0;
}
static int i2c_read_register(struct i2c_adapter *adap, int addr, int reg)
{
unsigned char write[1];
unsigned char read[1];
struct i2c_msg msgs[2] = {
{ addr, 0, 1, write },
{ addr, I2C_M_RD, 1, read }
};
write[0] = reg;
if (2 != i2c_transfer(adap,msgs,2)) {
printk(KERN_WARNING "tda9875: I/O error (read2)\n");
return -1;
}
dprintk("tda9875: chip_read2: reg%d=0x%x\n",reg,read[0]);
return read[0];
}
static void tda9875_set(struct i2c_client *client)
{
struct tda9875 *tda = i2c_get_clientdata(client);
unsigned char a;
dprintk(KERN_DEBUG "tda9875_set(%04x,%04x,%04x,%04x)\n",
tda->lvol,tda->rvol,tda->bass,tda->treble);
a = tda->lvol & 0xff;
tda9875_write(client, TDA9875_MVL, a);
a =tda->rvol & 0xff;
tda9875_write(client, TDA9875_MVR, a);
a =tda->bass & 0xff;
tda9875_write(client, TDA9875_MBA, a);
a =tda->treble & 0xff;
tda9875_write(client, TDA9875_MTR, a);
}
static void do_tda9875_init(struct i2c_client *client)
{
struct tda9875 *t = i2c_get_clientdata(client);
dprintk("In tda9875_init\n");
tda9875_write(client, TDA9875_CFG, 0xd0 ); /*reg de config 0 (reset)*/
tda9875_write(client, TDA9875_MSR, 0x03 ); /* Monitor 0b00000XXX*/
tda9875_write(client, TDA9875_C1MSB, 0x00 ); /*Car1(FM) MSB XMHz*/
tda9875_write(client, TDA9875_C1MIB, 0x00 ); /*Car1(FM) MIB XMHz*/
tda9875_write(client, TDA9875_C1LSB, 0x00 ); /*Car1(FM) LSB XMHz*/
tda9875_write(client, TDA9875_C2MSB, 0x00 ); /*Car2(NICAM) MSB XMHz*/
tda9875_write(client, TDA9875_C2MIB, 0x00 ); /*Car2(NICAM) MIB XMHz*/
tda9875_write(client, TDA9875_C2LSB, 0x00 ); /*Car2(NICAM) LSB XMHz*/
tda9875_write(client, TDA9875_DCR, 0x00 ); /*Demod config 0x00*/
tda9875_write(client, TDA9875_DEEM, 0x44 ); /*DE-Emph 0b0100 0100*/
tda9875_write(client, TDA9875_FMAT, 0x00 ); /*FM Matrix reg 0x00*/
tda9875_write(client, TDA9875_SC1, 0x00 ); /* SCART 1 (SC1)*/
tda9875_write(client, TDA9875_SC2, 0x01 ); /* SCART 2 (sc2)*/
tda9875_write(client, TDA9875_CH1V, 0x10 ); /* Channel volume 1 mute*/
tda9875_write(client, TDA9875_CH2V, 0x10 ); /* Channel volume 2 mute */
tda9875_write(client, TDA9875_DACOS, 0x02 ); /* sig DAC i/o(in:nicam)*/
tda9875_write(client, TDA9875_ADCIS, 0x6f ); /* sig ADC input(in:mono)*/
tda9875_write(client, TDA9875_LOSR, 0x00 ); /* line out (in:mono)*/
tda9875_write(client, TDA9875_AER, 0x00 ); /*06 Effect (AVL+PSEUDO) */
tda9875_write(client, TDA9875_MCS, 0x44 ); /* Main ch select (DAC) */
tda9875_write(client, TDA9875_MVL, 0x03 ); /* Vol Main left 10dB */
tda9875_write(client, TDA9875_MVR, 0x03 ); /* Vol Main right 10dB*/
tda9875_write(client, TDA9875_MBA, 0x00 ); /* Main Bass Main 0dB*/
tda9875_write(client, TDA9875_MTR, 0x00 ); /* Main Treble Main 0dB*/
tda9875_write(client, TDA9875_ACS, 0x44 ); /* Aux chan select (dac)*/
tda9875_write(client, TDA9875_AVL, 0x00 ); /* Vol Aux left 0dB*/
tda9875_write(client, TDA9875_AVR, 0x00 ); /* Vol Aux right 0dB*/
tda9875_write(client, TDA9875_ABA, 0x00 ); /* Aux Bass Main 0dB*/
tda9875_write(client, TDA9875_ATR, 0x00 ); /* Aux Aigus Main 0dB*/
tda9875_write(client, TDA9875_MUT, 0xcc ); /* General mute */
t->lvol=t->rvol =0; /* 0dB */
t->bass=0; /* 0dB */
t->treble=0; /* 0dB */
tda9875_set(client);
}
/* *********************** *
* i2c interface functions *
* *********************** */
static int tda9875_checkit(struct i2c_adapter *adap, int addr)
{
int dic,rev;
dic=i2c_read_register(adap,addr,254);
rev=i2c_read_register(adap,addr,255);
if(dic==0 || dic==2) { // tda9875 and tda9875A
printk("tda9875: TDA9875%s Rev.%d detected at 0x%x\n",
dic==0?"":"A", rev,addr<<1);
return 1;
}
printk("tda9875: no such chip at 0x%x (dic=0x%x rev=0x%x)\n",addr<<1,dic,rev);
return(0);
}
static int tda9875_attach(struct i2c_adapter *adap, int addr, int kind)
{
struct tda9875 *t;
struct i2c_client *client;
dprintk("In tda9875_attach\n");
t = kzalloc(sizeof *t,GFP_KERNEL);
if (!t)
return -ENOMEM;
client = &t->c;
memcpy(client,&client_template,sizeof(struct i2c_client));
client->adapter = adap;
client->addr = addr;
i2c_set_clientdata(client, t);
if(!tda9875_checkit(adap,addr)) {
kfree(t);
return 1;
}
do_tda9875_init(client);
printk(KERN_INFO "tda9875: init\n");
i2c_attach_client(client);
return 0;
}
static int tda9875_probe(struct i2c_adapter *adap)
{
if (adap->class & I2C_CLASS_TV_ANALOG)
return i2c_probe(adap, &addr_data, tda9875_attach);
return 0;
}
static int tda9875_detach(struct i2c_client *client)
{
struct tda9875 *t = i2c_get_clientdata(client);
do_tda9875_init(client);
i2c_detach_client(client);
kfree(t);
return 0;
}
static int tda9875_command(struct i2c_client *client,
unsigned int cmd, void *arg)
{
struct tda9875 *t = i2c_get_clientdata(client);
dprintk("In tda9875_command...\n");
switch (cmd) {
/* --- v4l ioctls --- */
/* take care: bttv does userspace copying, we'll get a
kernel pointer here... */
case VIDIOCGAUDIO:
{
struct video_audio *va = arg;
int left,right;
dprintk("VIDIOCGAUDIO\n");
va->flags |= VIDEO_AUDIO_VOLUME |
VIDEO_AUDIO_BASS |
VIDEO_AUDIO_TREBLE;
/* min is -84 max is 24 */
left = (t->lvol+84)*606;
right = (t->rvol+84)*606;
va->volume=max(left,right);
va->balance=(32768*min(left,right))/
(va->volume ? va->volume : 1);
va->balance=(left<right)?
(65535-va->balance) : va->balance;
va->bass = (t->bass+12)*2427; /* min -12 max +15 */
va->treble = (t->treble+12)*2730;/* min -12 max +12 */
va->mode |= VIDEO_SOUND_MONO;
break; /* VIDIOCGAUDIO case */
}
case VIDIOCSAUDIO:
{
struct video_audio *va = arg;
int left,right;
dprintk("VIDEOCSAUDIO...\n");
left = (min(65536 - va->balance,32768) *
va->volume) / 32768;
right = (min(va->balance,(__u16)32768) *
va->volume) / 32768;
t->lvol = ((left/606)-84) & 0xff;
if (t->lvol > 24)
t->lvol = 24;
if (t->lvol < -84)
t->lvol = -84 & 0xff;
t->rvol = ((right/606)-84) & 0xff;
if (t->rvol > 24)
t->rvol = 24;
if (t->rvol < -84)
t->rvol = -84 & 0xff;
t->bass = ((va->bass/2400)-12) & 0xff;
if (t->bass > 15)
t->bass = 15;
if (t->bass < -12)
t->bass = -12 & 0xff;
t->treble = ((va->treble/2700)-12) & 0xff;
if (t->treble > 12)
t->treble = 12;
if (t->treble < -12)
t->treble = -12 & 0xff;
//printk("tda9875 bal:%04x vol:%04x bass:%04x treble:%04x\n",va->balance,va->volume,va->bass,va->treble);
tda9875_set(client);
break;
} /* end of VIDEOCSAUDIO case */
default: /* Not VIDEOCGAUDIO or VIDEOCSAUDIO */
/* nothing */
dprintk("Default\n");
} /* end of (cmd) switch */
return 0;
}
static struct i2c_driver driver = {
.driver = {
.name = "tda9875",
},
.id = I2C_DRIVERID_TDA9875,
.attach_adapter = tda9875_probe,
.detach_client = tda9875_detach,
.command = tda9875_command,
};
static struct i2c_client client_template =
{
.name = "tda9875",
.driver = &driver,
};
static int __init tda9875_init(void)
{
return i2c_add_driver(&driver);
}
static void __exit tda9875_fini(void)
{
i2c_del_driver(&driver);
}
module_init(tda9875_init);
module_exit(tda9875_fini);
/*
* Local variables:
* c-basic-offset: 8
* End:
*/
Reference in a new issue View git blame Copy permalink