871b72dd1e
* Solve issues described in 6f66cbc630
in a way that doesn't resort to set_cpus_allowed();
* in fact, only collect_cpu_info and apply_microcode callbacks
must run on a target cpu, others will do just fine on any other.
smp_call_function_single() (as suggested by Ingo) is used to run
these callbacks on a target cpu.
* cleanup of synchronization logic of the 'microcode_core' part
The generic 'microcode_core' part guarantees that only a single cpu
(be it a full-fledged cpu, one of the cores or HT)
is being updated at any particular moment of time.
In general, there is no need for any additional sync. mechanism in
arch-specific parts (the patch removes existing spinlocks).
See also the "Synchronization" section in microcode_core.c.
* return -EINVAL instead of -1 (which is translated into -EPERM) in
microcode_write(), reload_cpu() and mc_sysdev_add(). Other suggestions
for an error code?
* use 'enum ucode_state' as return value of request_microcode_{fw, user}
to gain more flexibility by distinguishing between real error cases
and situations when an appropriate ucode was not found (which is not an
error per-se).
* some minor cleanups
Thanks a lot to Hugh Dickins for review/suggestions/testing!
Reference: http://marc.info/?l=linux-kernel&m=124025889012541&w=2
[ Impact: refactor and clean up microcode driver locking code ]
Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Peter Oruba <peter.oruba@amd.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <1242078507.5560.9.camel@earth>
[ did some more cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/include/asm/microcode.h | 25 ++
arch/x86/kernel/microcode_amd.c | 58 ++----
arch/x86/kernel/microcode_core.c | 326 +++++++++++++++++++++-----------------
arch/x86/kernel/microcode_intel.c | 92 +++-------
4 files changed, 261 insertions(+), 240 deletions(-)
(~20 new comment lines)
475 lines
14 KiB
C
475 lines
14 KiB
C
/*
|
|
* Intel CPU Microcode Update Driver for Linux
|
|
*
|
|
* Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
|
|
* 2006 Shaohua Li <shaohua.li@intel.com>
|
|
*
|
|
* This driver allows to upgrade microcode on Intel processors
|
|
* belonging to IA-32 family - PentiumPro, Pentium II,
|
|
* Pentium III, Xeon, Pentium 4, etc.
|
|
*
|
|
* Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
|
|
* Software Developer's Manual
|
|
* Order Number 253668 or free download from:
|
|
*
|
|
* http://developer.intel.com/design/pentium4/manuals/253668.htm
|
|
*
|
|
* For more information, go to http://www.urbanmyth.org/microcode
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com>
|
|
* Initial release.
|
|
* 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com>
|
|
* Added read() support + cleanups.
|
|
* 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com>
|
|
* Added 'device trimming' support. open(O_WRONLY) zeroes
|
|
* and frees the saved copy of applied microcode.
|
|
* 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com>
|
|
* Made to use devfs (/dev/cpu/microcode) + cleanups.
|
|
* 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com>
|
|
* Added misc device support (now uses both devfs and misc).
|
|
* Added MICROCODE_IOCFREE ioctl to clear memory.
|
|
* 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com>
|
|
* Messages for error cases (non Intel & no suitable microcode).
|
|
* 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
|
|
* Removed ->release(). Removed exclusive open and status bitmap.
|
|
* Added microcode_rwsem to serialize read()/write()/ioctl().
|
|
* Removed global kernel lock usage.
|
|
* 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
|
|
* Write 0 to 0x8B msr and then cpuid before reading revision,
|
|
* so that it works even if there were no update done by the
|
|
* BIOS. Otherwise, reading from 0x8B gives junk (which happened
|
|
* to be 0 on my machine which is why it worked even when I
|
|
* disabled update by the BIOS)
|
|
* Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
|
|
* 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
|
|
* Tigran Aivazian <tigran@veritas.com>
|
|
* Intel Pentium 4 processor support and bugfixes.
|
|
* 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
|
|
* Bugfix for HT (Hyper-Threading) enabled processors
|
|
* whereby processor resources are shared by all logical processors
|
|
* in a single CPU package.
|
|
* 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
|
|
* Tigran Aivazian <tigran@veritas.com>,
|
|
* Serialize updates as required on HT processors due to
|
|
* speculative nature of implementation.
|
|
* 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
|
|
* Fix the panic when writing zero-length microcode chunk.
|
|
* 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
|
|
* Jun Nakajima <jun.nakajima@intel.com>
|
|
* Support for the microcode updates in the new format.
|
|
* 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
|
|
* Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
|
|
* because we no longer hold a copy of applied microcode
|
|
* in kernel memory.
|
|
* 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
|
|
* Fix sigmatch() macro to handle old CPUs with pf == 0.
|
|
* Thanks to Stuart Swales for pointing out this bug.
|
|
*/
|
|
#include <linux/firmware.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include <asm/microcode.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/msr.h>
|
|
|
|
MODULE_DESCRIPTION("Microcode Update Driver");
|
|
MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
struct microcode_header_intel {
|
|
unsigned int hdrver;
|
|
unsigned int rev;
|
|
unsigned int date;
|
|
unsigned int sig;
|
|
unsigned int cksum;
|
|
unsigned int ldrver;
|
|
unsigned int pf;
|
|
unsigned int datasize;
|
|
unsigned int totalsize;
|
|
unsigned int reserved[3];
|
|
};
|
|
|
|
struct microcode_intel {
|
|
struct microcode_header_intel hdr;
|
|
unsigned int bits[0];
|
|
};
|
|
|
|
/* microcode format is extended from prescott processors */
|
|
struct extended_signature {
|
|
unsigned int sig;
|
|
unsigned int pf;
|
|
unsigned int cksum;
|
|
};
|
|
|
|
struct extended_sigtable {
|
|
unsigned int count;
|
|
unsigned int cksum;
|
|
unsigned int reserved[3];
|
|
struct extended_signature sigs[0];
|
|
};
|
|
|
|
#define DEFAULT_UCODE_DATASIZE (2000)
|
|
#define MC_HEADER_SIZE (sizeof(struct microcode_header_intel))
|
|
#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
|
|
#define EXT_HEADER_SIZE (sizeof(struct extended_sigtable))
|
|
#define EXT_SIGNATURE_SIZE (sizeof(struct extended_signature))
|
|
#define DWSIZE (sizeof(u32))
|
|
|
|
#define get_totalsize(mc) \
|
|
(((struct microcode_intel *)mc)->hdr.totalsize ? \
|
|
((struct microcode_intel *)mc)->hdr.totalsize : \
|
|
DEFAULT_UCODE_TOTALSIZE)
|
|
|
|
#define get_datasize(mc) \
|
|
(((struct microcode_intel *)mc)->hdr.datasize ? \
|
|
((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
|
|
|
|
#define sigmatch(s1, s2, p1, p2) \
|
|
(((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
|
|
|
|
#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
|
|
|
|
static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
|
|
{
|
|
struct cpuinfo_x86 *c = &cpu_data(cpu_num);
|
|
unsigned int val[2];
|
|
|
|
memset(csig, 0, sizeof(*csig));
|
|
|
|
if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
|
|
cpu_has(c, X86_FEATURE_IA64)) {
|
|
printk(KERN_ERR "microcode: CPU%d not a capable Intel "
|
|
"processor\n", cpu_num);
|
|
return -1;
|
|
}
|
|
|
|
csig->sig = cpuid_eax(0x00000001);
|
|
|
|
if ((c->x86_model >= 5) || (c->x86 > 6)) {
|
|
/* get processor flags from MSR 0x17 */
|
|
rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
|
|
csig->pf = 1 << ((val[1] >> 18) & 7);
|
|
}
|
|
|
|
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
|
|
/* see notes above for revision 1.07. Apparent chip bug */
|
|
sync_core();
|
|
/* get the current revision from MSR 0x8B */
|
|
rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
|
|
|
|
printk(KERN_INFO "microcode: CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n",
|
|
cpu_num, csig->sig, csig->pf, csig->rev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf)
|
|
{
|
|
return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1;
|
|
}
|
|
|
|
static inline int
|
|
update_match_revision(struct microcode_header_intel *mc_header, int rev)
|
|
{
|
|
return (mc_header->rev <= rev) ? 0 : 1;
|
|
}
|
|
|
|
static int microcode_sanity_check(void *mc)
|
|
{
|
|
unsigned long total_size, data_size, ext_table_size;
|
|
struct microcode_header_intel *mc_header = mc;
|
|
struct extended_sigtable *ext_header = NULL;
|
|
int sum, orig_sum, ext_sigcount = 0, i;
|
|
struct extended_signature *ext_sig;
|
|
|
|
total_size = get_totalsize(mc_header);
|
|
data_size = get_datasize(mc_header);
|
|
|
|
if (data_size + MC_HEADER_SIZE > total_size) {
|
|
printk(KERN_ERR "microcode: error! "
|
|
"Bad data size in microcode data file\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
|
|
printk(KERN_ERR "microcode: error! "
|
|
"Unknown microcode update format\n");
|
|
return -EINVAL;
|
|
}
|
|
ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
|
|
if (ext_table_size) {
|
|
if ((ext_table_size < EXT_HEADER_SIZE)
|
|
|| ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
|
|
printk(KERN_ERR "microcode: error! "
|
|
"Small exttable size in microcode data file\n");
|
|
return -EINVAL;
|
|
}
|
|
ext_header = mc + MC_HEADER_SIZE + data_size;
|
|
if (ext_table_size != exttable_size(ext_header)) {
|
|
printk(KERN_ERR "microcode: error! "
|
|
"Bad exttable size in microcode data file\n");
|
|
return -EFAULT;
|
|
}
|
|
ext_sigcount = ext_header->count;
|
|
}
|
|
|
|
/* check extended table checksum */
|
|
if (ext_table_size) {
|
|
int ext_table_sum = 0;
|
|
int *ext_tablep = (int *)ext_header;
|
|
|
|
i = ext_table_size / DWSIZE;
|
|
while (i--)
|
|
ext_table_sum += ext_tablep[i];
|
|
if (ext_table_sum) {
|
|
printk(KERN_WARNING "microcode: aborting, "
|
|
"bad extended signature table checksum\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* calculate the checksum */
|
|
orig_sum = 0;
|
|
i = (MC_HEADER_SIZE + data_size) / DWSIZE;
|
|
while (i--)
|
|
orig_sum += ((int *)mc)[i];
|
|
if (orig_sum) {
|
|
printk(KERN_ERR "microcode: aborting, bad checksum\n");
|
|
return -EINVAL;
|
|
}
|
|
if (!ext_table_size)
|
|
return 0;
|
|
/* check extended signature checksum */
|
|
for (i = 0; i < ext_sigcount; i++) {
|
|
ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
|
|
EXT_SIGNATURE_SIZE * i;
|
|
sum = orig_sum
|
|
- (mc_header->sig + mc_header->pf + mc_header->cksum)
|
|
+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
|
|
if (sum) {
|
|
printk(KERN_ERR "microcode: aborting, bad checksum\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* return 0 - no update found
|
|
* return 1 - found update
|
|
*/
|
|
static int
|
|
get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev)
|
|
{
|
|
struct microcode_header_intel *mc_header = mc;
|
|
struct extended_sigtable *ext_header;
|
|
unsigned long total_size = get_totalsize(mc_header);
|
|
int ext_sigcount, i;
|
|
struct extended_signature *ext_sig;
|
|
|
|
if (!update_match_revision(mc_header, rev))
|
|
return 0;
|
|
|
|
if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf))
|
|
return 1;
|
|
|
|
/* Look for ext. headers: */
|
|
if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
|
|
return 0;
|
|
|
|
ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
|
|
ext_sigcount = ext_header->count;
|
|
ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
|
|
|
|
for (i = 0; i < ext_sigcount; i++) {
|
|
if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf))
|
|
return 1;
|
|
ext_sig++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int apply_microcode(int cpu)
|
|
{
|
|
struct microcode_intel *mc_intel;
|
|
struct ucode_cpu_info *uci;
|
|
unsigned int val[2];
|
|
int cpu_num;
|
|
|
|
cpu_num = raw_smp_processor_id();
|
|
uci = ucode_cpu_info + cpu;
|
|
mc_intel = uci->mc;
|
|
|
|
/* We should bind the task to the CPU */
|
|
BUG_ON(cpu_num != cpu);
|
|
|
|
if (mc_intel == NULL)
|
|
return 0;
|
|
|
|
/* write microcode via MSR 0x79 */
|
|
wrmsr(MSR_IA32_UCODE_WRITE,
|
|
(unsigned long) mc_intel->bits,
|
|
(unsigned long) mc_intel->bits >> 16 >> 16);
|
|
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
|
|
|
|
/* see notes above for revision 1.07. Apparent chip bug */
|
|
sync_core();
|
|
|
|
/* get the current revision from MSR 0x8B */
|
|
rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
|
|
|
|
if (val[1] != mc_intel->hdr.rev) {
|
|
printk(KERN_ERR "microcode: CPU%d update "
|
|
"to revision 0x%x failed\n",
|
|
cpu_num, mc_intel->hdr.rev);
|
|
return -1;
|
|
}
|
|
printk(KERN_INFO "microcode: CPU%d updated to revision "
|
|
"0x%x, date = %04x-%02x-%02x \n",
|
|
cpu_num, val[1],
|
|
mc_intel->hdr.date & 0xffff,
|
|
mc_intel->hdr.date >> 24,
|
|
(mc_intel->hdr.date >> 16) & 0xff);
|
|
|
|
uci->cpu_sig.rev = val[1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
|
|
int (*get_ucode_data)(void *, const void *, size_t))
|
|
{
|
|
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
|
|
u8 *ucode_ptr = data, *new_mc = NULL, *mc;
|
|
int new_rev = uci->cpu_sig.rev;
|
|
unsigned int leftover = size;
|
|
enum ucode_state state = UCODE_OK;
|
|
|
|
while (leftover) {
|
|
struct microcode_header_intel mc_header;
|
|
unsigned int mc_size;
|
|
|
|
if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header)))
|
|
break;
|
|
|
|
mc_size = get_totalsize(&mc_header);
|
|
if (!mc_size || mc_size > leftover) {
|
|
printk(KERN_ERR "microcode: error!"
|
|
"Bad data in microcode data file\n");
|
|
break;
|
|
}
|
|
|
|
mc = vmalloc(mc_size);
|
|
if (!mc)
|
|
break;
|
|
|
|
if (get_ucode_data(mc, ucode_ptr, mc_size) ||
|
|
microcode_sanity_check(mc) < 0) {
|
|
vfree(mc);
|
|
break;
|
|
}
|
|
|
|
if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
|
|
if (new_mc)
|
|
vfree(new_mc);
|
|
new_rev = mc_header.rev;
|
|
new_mc = mc;
|
|
} else
|
|
vfree(mc);
|
|
|
|
ucode_ptr += mc_size;
|
|
leftover -= mc_size;
|
|
}
|
|
|
|
if (leftover) {
|
|
if (new_mc)
|
|
vfree(new_mc);
|
|
state = UCODE_ERROR;
|
|
goto out;
|
|
}
|
|
|
|
if (!new_mc) {
|
|
state = UCODE_NFOUND;
|
|
goto out;
|
|
}
|
|
|
|
if (uci->mc)
|
|
vfree(uci->mc);
|
|
uci->mc = (struct microcode_intel *)new_mc;
|
|
|
|
pr_debug("microcode: CPU%d found a matching microcode update with"
|
|
" version 0x%x (current=0x%x)\n",
|
|
cpu, new_rev, uci->cpu_sig.rev);
|
|
out:
|
|
return state;
|
|
}
|
|
|
|
static int get_ucode_fw(void *to, const void *from, size_t n)
|
|
{
|
|
memcpy(to, from, n);
|
|
return 0;
|
|
}
|
|
|
|
static enum ucode_state request_microcode_fw(int cpu, struct device *device)
|
|
{
|
|
char name[30];
|
|
struct cpuinfo_x86 *c = &cpu_data(cpu);
|
|
const struct firmware *firmware;
|
|
enum ucode_state ret;
|
|
|
|
sprintf(name, "intel-ucode/%02x-%02x-%02x",
|
|
c->x86, c->x86_model, c->x86_mask);
|
|
|
|
if (request_firmware(&firmware, name, device)) {
|
|
pr_debug("microcode: data file %s load failed\n", name);
|
|
return UCODE_NFOUND;
|
|
}
|
|
|
|
ret = generic_load_microcode(cpu, (void *)firmware->data,
|
|
firmware->size, &get_ucode_fw);
|
|
|
|
release_firmware(firmware);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int get_ucode_user(void *to, const void *from, size_t n)
|
|
{
|
|
return copy_from_user(to, from, n);
|
|
}
|
|
|
|
static enum ucode_state
|
|
request_microcode_user(int cpu, const void __user *buf, size_t size)
|
|
{
|
|
return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user);
|
|
}
|
|
|
|
static void microcode_fini_cpu(int cpu)
|
|
{
|
|
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
|
|
|
|
vfree(uci->mc);
|
|
uci->mc = NULL;
|
|
}
|
|
|
|
static struct microcode_ops microcode_intel_ops = {
|
|
.request_microcode_user = request_microcode_user,
|
|
.request_microcode_fw = request_microcode_fw,
|
|
.collect_cpu_info = collect_cpu_info,
|
|
.apply_microcode = apply_microcode,
|
|
.microcode_fini_cpu = microcode_fini_cpu,
|
|
};
|
|
|
|
struct microcode_ops * __init init_intel_microcode(void)
|
|
{
|
|
return µcode_intel_ops;
|
|
}
|
|
|