android_kernel_motorola_sm6225/include/linux/ioc3.h
Patrick Gefre 2d0cfb5279 [PATCH] Altix: ioc3 serial support
Add driver support for a 2 port PCI IOC3-based serial card on Altix boxes:

This is a re-submission.  On the original submission I was asked to
organize the code so that the MIPS ioc3 ethernet and serial parts could be
used with this driver.  Stanislaw Skowronek was kind enough to provide the
shim layer for this - thanks Stanislaw.  This patch includes the shim layer
and the Altix PCI ioc3 serial driver.  The MIPS merged ioc3 ethernet and
serial support is forthcoming.

Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:25:20 -08:00

93 lines
3.2 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2005 Stanislaw Skowronek <skylark@linux-mips.org>
*/
#ifndef _LINUX_IOC3_H
#define _LINUX_IOC3_H
#include <asm/sn/ioc3.h>
#define IOC3_MAX_SUBMODULES 32
#define IOC3_CLASS_NONE 0
#define IOC3_CLASS_BASE_IP27 1
#define IOC3_CLASS_BASE_IP30 2
#define IOC3_CLASS_MENET_123 3
#define IOC3_CLASS_MENET_4 4
#define IOC3_CLASS_CADDUO 5
#define IOC3_CLASS_SERIAL 6
/* One of these per IOC3 */
struct ioc3_driver_data {
struct list_head list;
int id; /* IOC3 sequence number */
/* PCI mapping */
unsigned long pma; /* physical address */
struct __iomem ioc3 *vma; /* pointer to registers */
struct pci_dev *pdev; /* PCI device */
/* IRQ stuff */
int dual_irq; /* set if separate IRQs are used */
int irq_io, irq_eth; /* IRQ numbers */
/* GPIO magic */
spinlock_t gpio_lock;
unsigned int gpdr_shadow;
/* NIC identifiers */
char nic_part[32];
char nic_serial[16];
char nic_mac[6];
/* submodule set */
int class;
void *data[IOC3_MAX_SUBMODULES]; /* for submodule use */
int active[IOC3_MAX_SUBMODULES]; /* set if probe succeeds */
/* is_ir_lock must be held while
* modifying sio_ie values, so
* we can be sure that sio_ie is
* not changing when we read it
* along with sio_ir.
*/
spinlock_t ir_lock; /* SIO_IE[SC] mod lock */
};
/* One per submodule */
struct ioc3_submodule {
char *name; /* descriptive submodule name */
struct module *owner; /* owning kernel module */
int ethernet; /* set for ethernet drivers */
int (*probe) (struct ioc3_submodule *, struct ioc3_driver_data *);
int (*remove) (struct ioc3_submodule *, struct ioc3_driver_data *);
int id; /* assigned by IOC3, index for the "data" array */
/* IRQ stuff */
unsigned int irq_mask; /* IOC3 IRQ mask, leave clear for Ethernet */
int reset_mask; /* non-zero if you want the ioc3.c module to reset interrupts */
int (*intr) (struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int, struct pt_regs *);
/* private submodule data */
void *data; /* assigned by submodule */
};
/**********************************
* Functions needed by submodules *
**********************************/
#define IOC3_W_IES 0
#define IOC3_W_IEC 1
/* registers a submodule for all existing and future IOC3 chips */
extern int ioc3_register_submodule(struct ioc3_submodule *);
/* unregisters a submodule */
extern void ioc3_unregister_submodule(struct ioc3_submodule *);
/* enables IRQs indicated by irq_mask for a specified IOC3 chip */
extern void ioc3_enable(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
/* ackowledges specified IRQs */
extern void ioc3_ack(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
/* disables IRQs indicated by irq_mask for a specified IOC3 chip */
extern void ioc3_disable(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
/* atomically sets GPCR bits */
extern void ioc3_gpcr_set(struct ioc3_driver_data *, unsigned int);
/* general ireg writer */
extern void ioc3_write_ireg(struct ioc3_driver_data *idd, uint32_t value, int reg);
#endif